USER GUIDE RF&KEYPAD INTEGRATED LOCKER LOCK (model :PT400B) Version 1.
Table of Contents 1 Understanding PT400B Locker Lock ......................................... 3 1.1 What is PT400B Locker Lock? .............................................................. 3 1.2 Operation cards .................................................................................... 3 2. Types of Lock Operating Scenario ......................................... 3 2.1 Free Selection (Shared Use)................................................................. 4 2.
1 Understanding PT400B Locker Lock 1.1 What is PT400B Locker Lock? - PT400B locker lock is operated by either keypads or BLE enabled mobile device (i.e. smartphone). - PT400B is the battery power operating standalone RFID lock ( Offline ) 1.2 Operation cards Card Description Name Card type • Security Key value to be loaded to locks at scanning. Key • Then, the locks will accept only the RFID cards which have the same security key card value.
by simple set up process. Following operation modes can be programmed before or after lock installation. 2.1 Free Selection (Shared Use) - User can select any empty locker. - LED lamp is blinking to represent locker is in use. - Programmable to use multiple locks with one User card (max. 8 users in a locker). - Programmable for Time based operation 2.2 Assigned Mode (Permanent Use) - Locker assigned to each User card in advance. - Programmable to use multiple assigned lockers with one card (max.
3.1 Assigned Mode 3.1.1 Open & Close by Pin Code ① Default Pin Code :1234 + “4 digit Pin Code”+ ② Open： ③ Close： Automatic close after several seconds ( Full cycle latch ) ④ Change Pin Code： + old Pin Code + + new Pin Code + + new Pin Code + Pin Code can be changed only when the lock is under unlocked status. 3.2 Free Selection Mode 3.2.1.
① Download Passtech Mobile App from Google play store and install it into his smartphone ② After running the App, choose ‘Free mode’ on the setting tab. ③ Then, you can freely choose any available lock to operate. (2) Access Log To check the history of the mobile access key, visit the “Access Log” panel in the Menu window. To access your mobile device, please set your lock for CSN Free mode and change the usage mode to Free mode from the Passtech APP from your mobile device. 3.
lock by Master Card I or Master code. ② If Master code is set, + Master code + to open any locks. Master card can be set by Set up Card. ③ Once Master card I is used to open the lock, the lock reverts to default position (i.e. lock will stay open for Free Selection, and default code of 1234 for Assigned mode.). ④ User Card ID will be erased from the lock if Master Card I has the function to delete the User ID.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS 4. Card Operation 4.1 Owner Card The role of the Owner card is to delete the Master card registration. Therefore, Owner Version 1.
card will be used to delete current master card registration in the lock, and make the lock to be ready to register new Master Card. It is simple to delete the Master card registration and to register new master card in the lock : ① Put the Owner card to the lock until lock sounds beep (one time) and red lamp lights. ② Now, all Master card registration is deleted from the lock. ③ After Owner card scanned, put new master cards to register to the lock 4.2 Master Card 4.2.
③ Put the Maintenance card to the locks, then, new Master cards will be registered to the lock, and lost master card will be blocked. (2) Using Owner Card ① Delete the old master card registrations in the lock (refer to the 4.1) with Owner Card. ② Put new master cards to each lock so as to register new master cards. Then, old master card you lost will not be used.
☞ In free selection mode, lock and card needs to read and write the each other’s information. So please do not sway the card until the latch is moved. 4.3.2 Assigned Mode (Permanent Use) The initial status of the lock in Assigned Mode is closed status (bolt out) ① Press on the front body of the lock. ② Put the User Card to the front body of the assigned lock. ③ Lock checks the card, and green LED lights and beep sound once. Then, lock will be opened, and closed again in 5 seconds.
4.4 Maintenance card ① Program Maintenance card as you want from LOS ② Put Maintenance card to each lock, lock will be set as you programmed in step ① ③ Time of the lock, Master cards change, Master code, Wireless online channel, Auto status update time can be updated with Maintenance card. 4.5 Audit Trail card ① Put Audit Trail Card to the lock. ② The latest event data (up to 18 events) will be downloaded from lock to the Card. Wait until melody is on.
3) Open/Close：GREEN LED on for 0.2 second, one beep sound for 0.2 second. 4) Successful programming：Melody. 5) Indicate for mistake：RED LED flashes 3 times, 3 beep sounds 6) Low voltage：RED LED blinks 5 times, and beep sounds 5 times. 7) Incorrect Pin Code or input is beyond 6 digits: see #5, power off，need to press 8) to wake up the keypad again. When the input is incomplete, after 5 seconds, see #5，power off . You need to press again to wake up the keypad.
buttons 3 X short beep 1 X Green & Red User card expired 4 X short beep - Exceed the capacity of Lock info card 5 x short beep 5 x Red & Green Low battery Do-Re for 1.5 sec 4 X Red & Green Forced entry.
ANNEX B Trouble Shooting 1) Master card registration should be followed after deleting old Master card in the lock by Master card registration in the lock was failed. Owner card. 2) Put Master card on the lock before waiting time is out after Owner card. Cannot open the lock with Master Master card is not registered in the lock. card Please Register the Master card in the lock. 1. Check the Setting of User card by LOS.
Thank you for choosing PT400B RFID/Keypad locks. IF you have any questions, please contact your local distributor or our technical support. FCC Statement 15.19: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 5.
