USER GUIDE RFID LOCKER LOCK (model : HP100) Version 1.
Table of Contents 1. Understanding HP-100 RFID lock ................................................................................. 3 1.1 What is HP100 RFID Locks? .......................................................................... 3 1.2 Card Type and Functions ................................................................................. 3 2. Type of Lock Operation ................................................................................................. 4 2.
1. Understanding HP-100 RFID lock 1.1 What is HP100 RFID Locks? - ZP100 RFID lock is a locker lock operated by 13,56 Mhz RF keys such as card, tag, key ring or wristband. 1.2 Card Type and Functions Key Card Owner Card : Load Key to the lock. : Delete Master card registration in the lock for new Master card registration. Master Card :Each of the following function can be set ① Alarm Off, User card delete and Locker open.
2. Type of Lock Operation HP-100 RFID lock are designed to work for the various operation requirements by simple set up process. Following operation modes can be programmed before or after lock installation. 2.1 Free Selection (Day Use) - User can select any empty locker. - Red LED lamp is blinked to show the locker is in use (Option. In-use lamp off is recommended to save battery). - Programmable to use multiple locks with one User card (max. 5 lockers) - Programmable for Time based operation Version 1.
3. Basic operation of the Lock ZP100 RF Locker lock is woken up by RF sensor, and read and write the User Card when User card is placed on the Front body. Once the User Card is authenticated by RF lock, the bolt of the lock will come out (Free Selection mode) or come backward and forward (Fixed Mode). User card needs to be put on the front body until lock and card complete the authentication process (1 beep sound and green Led lamp is on). 3.
3.2.2 Replacing old Master cards with New Master cards There are two ways to delete the lost Master card and register new Master card in the lock. (1) Using Time/Master Change Card ① Read the master cards (all Master cards to be used in a lock) to register in each lock at Time/master change menu in LOS program (or LIS program). ② Put the Time/Master change card to the reader, and download the master card chip numbers to the Card.
3.2.4 What can I do with Master card? The function of the Master card is decided when Set up card is generated by lock installer from the following three functions. ① Door Open & User Card delete : Turn off the alarms, open the lock and delete old User card registration. ② Door Open and Close : Turn off the alarms and open the lock and close only. User card information in the lock is not deleted, 3.2.5 Can I set the Master cards to open all locks or specific group of locks only? Yes.
③ Lock will check the lock ID and key of the user card (or any form of user key). ④ Lock will emit Green LED and beep sound once. ⑤ Bolt will be moved and locker will open. ⑥ User information will be erased from the lock so that new user can use the empty lock. ☞ In free selection mode, lock and card needs to read and write the each other’s information. So please do not sway the card until the latch is moved. 3.3.
clock of the lock returns to default time (2008. 01.01). CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS ④ Please use the Time Setting card to set the time of the lock. (For time setting, please refer to “How to use LOS (Locker Operation System)” or LIS(Locker Installation System). 3.5 Audit Trail ① Put Audit Trail Card to the lock. ② The latest event data (up to 18 events) will be downloaded from lock to the Card.
ANNEX A Beep & LED Table Beep LED Description 1 x short beep 1 x Green(2sec) OK 3 x short beep 3 x Red(2sec) flashes Operation Error 3 x short beep 1 x Red & Green in turn(2sec) Time over Do-Re-Mi Melody 1 x Red & Green in turn(2sec) Successful Set up / mode change / Time setting 5 x short beep 5 x Red & Green Low battery Do-Re-Mi Melody 2 x Red & Green Successful between connection front and back bodies. 1 x short beep 1 x Green Off the Alarm by Master card Melody 1 x Green (1.
ANNEX B Trouble Shooting 1) Master card registration should be followed Master card registration in the lock was failed. after deleting old master card in the lock by Owner card. 2) Put Master card on the lock before waiting time is out after Owner card. Cannot open the lock with Master Master card is not registered in the lock. card Please Register the Master card in the lock. 1. Check the Setting of User card by LOS.
Should you have any questions, please contact your local distributor or our technical support. Version 1.
USA-Federal Communications Commission (FCC) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules.