User Manual Smart Band PWB-600 ver. 1.
Package PWB-600 Charging Cradle Quick Guide Charging cable Product contents 1.
Battery charging - Attach the band body to the charging cradle according to the direction. (If the charging cradle does not match the direction, charging will not be possible.
Start [application downloading] - Install the ‘Urban Fit’ app on your smartphone. (Please search for 'Urban Fit' in the Android Play Store or IOS APP Store.) Connecting Urban Fit Step 1. Run the downloaded ‘Urban Fit’ APP, turn on the Bluetooth of the mobile phone, and turn on the power of the band watch to be connected. Step 2. After selecting the Urban HR product on the APP screen, enter the PIN code displayed on the band screen into the app screen. 00AB11 Band Screen PIN Code Step 3.
EX) PIN cord 000000 List selection number BMHC-000000 * When reconfirming the PIN code, you can check the six digits of the PIN code by sliding the screen from bottom to top. - If it works properly, the message “Pairing Successful”appears on the APP screen. Manual exercise mode operation - Slide the band screen to the right to select ‘Exercise’ and press Start to proceed to the exercise mode.
Precautions for Safety 1. Do not disassemble or modify the main body. It may cause fire or malfunction. 2. Do not use and store at high or low temperature. 3. Do not use and store in a humid or volatile location, near fire. 4. If you use a car charger, it is allowed for a general passenger car. High-power products may damage the cargo vehicles of 1 ton or more. 5.
should not be used for the diagnosis or treatment of diseases or other conditions or for the prevention and treatment of diseases. 10. This product supports a certain level of waterproofing, but does not guarantee perfect waterproofing in special matters (swimming, submerging and diving). In addition, manufacturers and distributors are not responsible for failures in these situations. 11. Be careful not to let the terminals of the charging cradle connected to the charging cable contact metal objects.
Regulatory Information [ We can see the Certification information in two ways ] - Confirm with the information attached to the rear of the product - Confirm with the information eletronics display to E-label 1. Touch to the right to move to the 'Setting'. 2. Select 'Certification'. 3. We can see 'FCC ID', 'KC Ceritification number', Model name, Manufacture and Input rating information.
Product Inquiry 'Urban Fit 600' APP usage inquiry Health Promotion Development Center Bulletin board in APP Smart Band Product Inquiries Patron Customer Support Center 1644-4068 FCC Compliance Information FCC ID : 2AD5K-PWB600 1) FCC Compliance Statement This device complies with part 15 of the FCC rules.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one of the following measures : Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.