Manual [English] Medical Device The patient is an intended operator PTD-400 Non contact infrared body thermometer Copyright © 2020 All rights reserved. Written on : 2020 - 11 There is a possibility of radio confusion during operation of the corresponding wireless system.
/ Product Overview / Purpose of Use This product is a portable measuring device that can collect infrared radiation energy from the human body (forehead, below ear, etc.) through sensors to measure body temperature and manage the information. This non-contact device is used for measurement by placing the built-in sensor in the top part of the product within 3 cm of the site to be measured. An additional function to measure temperature of general objects is also included.
/ Product Composition - Shape and Structure / 1 1-2 1-1 1-3 1-4 1-5 Front Back 2 CR2032 3 1. Body (1EA) 1-5. Battery cover 1-1. Temperature sensing unit 2 . User manual 1-2. Strap hole 3 . CR2032 coin battery (1EA) 1-3. OLED display 1-4.
/ How to Replace Battery / - Loosen the screw at the bottom of the main body with a screwdriver, press both gaps with your fingertips, then pull down to remove the battery cover. - Place the battery fitting in the direction of insertion, close the cover and screw with screwdriver.
*How to Insert Battery - Insert the CR2032 battery diagonally so that the battery cover gets stuck in a bump and press it to close. - Battery should be inserted so that the surface without the specification mark is facing up. - Insert in a way that poles are facing upwards. / How to Use PTD-400 / 1. Power On / Standby / Power Off - Press the button on the main body once briefly. (“HELLO” is displayed and power gets turned on.
2. Setting Target to be Measured (People/Object) - Click the button 3 times on the standby screen to enter the setting screen - After entering the setting screen, temperature ( ) and object ( be chosen by clicking twice on the measurement target icon. )can temperature object Click the button 3 times Click the button twice 3. Measuring Body Temperature / Checking Previous Measurement Records - Select a temperature measurement on the setting screen.
- Click the button twice on the standby screen to enter the previous measurement records. - On the previous measurement records screen, click the button once to start the temperature measurement. Click the button twice Click the button twice *Check body temperature measurement position before starting measurement.
4. Display of Body Temperature - When the temperature measurement is complete, the device will be vibrated, and the measured temperature will be displayed on the screen *If the measured temperature is greater than 42 degrees, it will be displayed as HIGH if less than 32 degrees, it will be displayed as LOW. 42℃ ↑ 32℃ ↓ 5. Measuring Object Temperature - Select an object temperature measurement on the setting screen.
6. Changing Temperature Unit 1) Click the button 3 times on the standby screen to enter the setting screen. 2) Click the button once on the setting screen to enter the temperature unit setting screen. 3) Click the temperature icon °C (or °F) twice to change the temperature unit. Celsius Fahrenheit Click the button 3 times Click the button once Click the button twice 7.
/ In the Event of Abnormalities / Error message Abnormality Solution - Leave the thermometer It will display this for at least 30minutes in message when the the ambient temperature room temperature is environment available before outside the operational measurement. temperature range of - If the same message is 15°C to 40°C. displayed afterwards, contact the customer service center. / Product Storage and Care / 1.
* This product has a magnet built into the front of the main body, so it can be stored on a wall made of steel. steel walls Store it by attaching it to the magnetic object * It can be carried and stored using the strap hole at the top of the main body. (The strap is not included in the product package.
Check the precautions when measuring body temperature! 1. The person being measured must remain stable indoors for at least 30 minutes. 2. Prior to measurement, the sensor must be checked for foreign substances before use. (If there is a foreign substance, the measurement may be incorrect, or an alarm will be displayed to recommend re-measurement.) 3. It is recommended to measure with 3 cm distance away from the skin and be careful not to move the thermometer until it is vibrated after measurement.
- Infants under 3 years of age whose body temperature is shown outside the average temperature range. - If the product is used for the first time or has no experience of using a similar product. Precautions for Use Thank you for purchasing PTD-400 (Infrared Body Thermometer).
5. This product is made of precise parts. Do not drop this product or give shock. 6. Do not put the product in your mouth to measure your body temperature. 7. Do not attempt to repair and disassemble the product at your discretion. 8. Be careful not to swallow the coin battery, screw and battery cover. 9. Use only Li, CR2032 coin battery. 10. After replacing the battery, close the cover completely and turn it on.
FCC Compliance Information FCC ID : 2AD5K-PTD400 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
/ Product Disposal / This product is a product that does not produce any residues harmful to the human body. In principle, it is required to separate and discharge the product in accordance with the general disposal procedure of electronic products. / Transportation and Storage Conditions / - Temperature : -40℃ ~ 70℃ - Humidity : 10% RH ~ 95% RH - Atmospheric pressure : 76.0 kPa ~ 106.0 kPa / Operating Condition / - Temperature : 15℃ ~ 40℃ - Humidity : 10% RH ~ 85% RH - Atmospheric pressure : 76.
/ Product specification / Specification Product Name Item Name Purpose of Use Temperature Measurement Range Battery Measurement Time Measurement Method Display Device Classification / Waterproof Rating WE - TEMP Infrared body thermometer PTD-400 This is a medical device that measures body temperature Body Measurement Object Measurement 32℃ ~ 42℃ 89.6 ℉ ~ 107.
Resolution Accuracy Automatic Power Cut-off Dimension ( WxLxH ) Weigt Operational Environment Rating Product life Voltage Rating Bluetooth Data for Transmission Manufacture Date / Lot Number 0.1(Body temperature), 1(Object temperature) Body measurement • 32°C to less than 36°C : ± 0.3℃ • 36℃ ~ 39℃ : ± 0.2℃ • Over 39℃ ~ 42℃ : ± 0.3℃ Object measurement • 0°C to less than 22°C : ±3°C • 22°C~ 42°C • 43°C to less than 100°C : ±3°C • 100°C~ 180°C : ± 5°C Automatic power cut-off after 20 seconds 28.
/ warranty / Product Name WE - TEMP Model PTD-400 Manufacture Date / Lot Number Displayed in the label on product package Place of Purchase Date of Purchase Free warranty period within one year from the date of purchase This product was made through strict quality control and inspection process of our company. - The compensation criteria for product repair and exchange shall follow the "Compensation Rules for Consumer Damages" announced by the Ministry of Finance and Economy.
Manufacturer partron Co.
