User Instructions

ManualsBrandsParticle ManualsElectronicsB Series B402

QUICK START: B402

The Particle B402 is a mesh and Bluetooth development kit designed for building

connected projects and products. To set up the device you'll need an Android or

iOS mobile phone and a connection to the internet.

PRODUCT

B Series B402

MODEL NAME

B402,B402S

NOMINAL VOLTAGE

Li+ PIN /Battery connector: DC 3.7V from Li-ion Battery or

VUSB PIN /USB connector :DC 5V from USB Host Unit

OPERATING

TEMPERATURE

RANGE

-20 ~ 75℃

MODULATION TYPE

LTE/BLE

QPSK&16QAM, GFSK(1MHz, 2MHz)

TX OPERATING

FREQUENCY

LTE/BLE

1850.7MHz ~ 1909.3MHz (FOR LTE Band2)

1710.7MHz ~ 1754.3MHz (FOR LTE Band4)

824.7MHz ~ 848.3MHz (FOR LTE Band5)

699.7MHz ~ 715.3MHz (FOR LTE Band12)

779.5MHz ~ 784.5MHz (FOR LTE Band13)

2402MHz ~ 2480MHz (FOR BLE)

ANTENNA GAIN

LTE Band 2

FPC Antenna with 3.5dBi gain

LTE Band 4

FPC Antenna with 3.5dBi gain

LTE Band 5

FPC Antenna with 1.0dBi gain

LTE Band 12

FPC Antenna with 1.0dBi gain

LTE Band 13

FPC Antenna with 1.0dBi gain

BLE

FPCB Antenna with 2.0dBi gain

Summary of content (6 pages)

PAGE 1
QUICK START: B402 The Particle B402 is a mesh and Bluetooth development kit designed for building connected projects and products. To set up the device you'll need an Android or iOS mobile phone and a connection to the internet. PRODUCT B Series B402 MODEL NAME B402,B402S Li+ PIN /Battery connector: DC 3.
PAGE 2
SET UP YOUR B402 The B402 Kit comes with the following things:    B402 development kit SoM develop board Starter Project o One micro-USB cable o One LiPo battery 1. Set up your B402 Use the online setup application to configure your new B402. The process includes the following.
PAGE 3
If you're looking for a more traditional embedded development experience, be sure to learn about [Particle Workbench], a full toolchain integration with Microsoft Visual Studio Code. 3. Load the Blink example Click on Blink an LED on the left side of the page. As soon as you click the Blink and LED code will load and fill the screen as shown below.
PAGE 4
NOTE: If you don't see your B402 listed, click on the device name. A sidebar will appear on the left with a list of all of your devices. Click on start to the left of the B402 you wish to deploy code to. 5. Compile your code & flash Click the lightning bolt icon on the top left of your screen to flash your code to your device. As soon as you click, the Particle Device cloud will compile the program source code to a binary file and send it over-the-air (OTA) to your Argon.
PAGE 5
FCC Statement This device complies with Part 15/22/24/27 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 6
Industry Canada statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.