Parrot Zikmu by Starck User guide
Contents Getting started .......................................................................................................... 4 Installation................................................................................................................................................ 4 Installation ..................................................................................................................................... 4 Maintenance and precautions ..........................................
RCA .......................................................................................................................... 21 Audio Parameters ................................................................................................... 22 Using the Random and Repeat options ...................................................................................... 22 Using the equalizer ....................................................................................................................
Getting started Installation Positioning the Zikmu To get the best possible sound performances, we advise you to respect the following recommendations: Make sure that you correctly install the speakers at their respective positions: the iPod / iPhone docking station must be on your right. To get an accurate reproduction of the bass frequencies, make sure there is a minimal distance of 40 cm between the back and lateral walls and the speaker.
WARNING - Use only a CR2032 battery. - Dispose of used batteries in compliance with current recycling legislation in the country of use. Maintenance and precautions To remove dust and fingerprints from the speakers, use a damp cloth. Do not use any kind of cleaning agent on the Zikmu. The Zikmu is a high technology product. Please handle the speakers with care. Commands Turning the speakers on / off Press the button of the remote control or control panel to turn on / off the speakers.
If you start playing a music file from a second source: - this source is automatically selected ; - the music currently played from the first source is automatically suspended if it this first source is an iPod / iPhone or an audio player connected via Bluetooth.
Wi-Fi Before you begin WARNING: The performance of the Zikmu depends highly on the performance of your modem / router. Set up Operating system Wi-Fi access point The Zikmu is compatible with the Windows XP (SP2 and later), Windows Vista SP1 and Windows 7 operating systems. You need an access to the internet to download the necessary software and a Wi-Fi access point to establish the connection with the Zikmu.
Identifying the type of connection The type of connexion you have to establish with the Zikmu depends on the model of your modem / router: you have to determine whether it supports the SES or WPS technologies. WPS (Wi-Fi Protected Setup) or SES (Secure Easy Setup) technologies allow you to establish a secured connection between several Wi-Fi devices simply by pressing a button. To find out whether your modem supports SES or WPS technologies, refer to the documentation of your device.
Installing the Parrot Audio Suite Description The Parrot Audio Suite is composed of the Parrot Sound Manager and Parrot Audio Configuration Tool software. The Parrot Sound Manager software allows you to establish the connection between your PC and the speakers via Wi-Fi. The Parrot Audio Configuration Tool software allows you to modify several audio and Bluetooth parameters. ► Refer to the Parameters section for more information.
4. Click on Next. > You will lose your internet connection during the configuration (5 minutes max). You will get your internet connection back as soon as the configuration is over. > A window allowing you to change the name of the Zikmu is displayed. 5. Enter a new name if necessary and click on Next. > If you click on the icon at the bottom right of your screen, the Zikmu is now displayed among the available Wi-Fi peripherals.
Using the web interface Once the Zikmu is connected to your Wi-Fi network, you can control it from your PC. To do so, launch your web browser and enter « zikmu.local » in the address bar. The web interface will allow you to: - Check if a new software update is available ; - Control the playback of your audio files ; - Modify several audio settings. ► Click here to watch the corresponding tutorial.
iPod Compatibility You can use the Zikmu with the following devices: iPhone, iPhone 3G, iPhone 3GS, iPod video, iPod nano (1G, 2G, 3G, 4G) iPod classic, iPod touch (1G, 2G and 3G) and later models. If you are using the Zikmu with an iPod nano 1G or an iPod video, only the remote control can be used to control the volume and the playback. Installation Using the dock adapter Use the dock adapter provided with your iPod or choose the one fitting your iPhone among the adapters provided with the Zikmu.
Commands Turning the iPod / iPhone on / off Controlling the music playback Hold down the button of the remote control for 2 seconds to turn on / off the iPod / iPhone connected to the Zikmu. Pause a song Press the button. Resume playback Press the button. Rewind or fast forward Hold down the for 2 seconds. Skip to the previous / next song Press the or or buttons button.
Bluetooth Using the Zikmu with a Bluetooth phone Compatibility You can listen to your music tracks stored on your mobile phone / PDA / smartphone via the Zikmu. Your mobile phone must be able to support the Bluetooth® A2DP profile (Advanced Audio Distribution Profile). Pairing the Zikmu with a Bluetooth phone / PDA Before using the Zikmu with your phone, both devices must be connected. If you are using your phone with the speakers for the first time, you first have to pair both devices. 1.
Notes: - You can pair up to 10 devices with the Zikmu (mobile phone, PC, Bluetooth audio player…). - If you attempts to pair an 11th device, the pairing of the device which has not been connected to the Zikmu for the longest period will be deleted. Connecting a mobile phone / PDA to the Zikmu Before you start streaming music from your phone to the speakers, you must connect both devices.
Using the Zikmu with a computer via Bluetooth Before you begin Compatibility The Zikmu is compatible with all PCs supporting Bluetooth technology. If your PC is not Bluetooth enabled, connect a Bluetooth dongle. You can also use the Zikmu with a Mac OS X Leopard (or later version). Determining the PC Bluetooth software The connection procedure between your PC and the Zikmu depends on the Bluetooth software you are using.
Establishing the connection using the Parrot Audio Configuration Tool software If your PC is equipped with the Widcomm Bluetooth software, use the Parrot Audio Configuration Tool software to establish the connection. 1. Launch the Parrot Audio Configuration Tool software. > The Connection dialog box is displayed. 2. Select the New option. > The available Bluetooth devices list. 3. Press the button on the control panel. 4. Select the « Parrot by Starck » and click on Connect.
Establishing the connection with the Mac Bluetooth software 1. Click on the Bluetooth icon located up right of your screen. 2. Make sure the Bluetooth feature is turned on. If it is not the case, click on Bluetooth On, then click on Set up Bluetooth Device. 3. Click on Continue. 4. Select Headset then click on Continue. 5. Select « Parrot by Starck » in the displayed list and click on Continue. 6. Press the button on the control pannel of the Zikmu. 7.
8. Select the Zikmu as headphone. To do so: a. Click on the Bluetooth icon. b. Select the Parrot by Starck. c. Select the Use Headphone option. Establishing the connection with the Toshiba Bluetooth software If you are using the Toshiba Bluetooth software, you have to connect the Zikmu to your computer before using the Parrot Audio Configuration Tool. This step is only necessary once. 1. Double-click on the icon. > The Bluetooth Parameters window is displayed. 2. Click on . 3.
Bluetooth Parameters Modifying the Bluetooth name You have the possibility to modify the name of the Zikmu in order to recognize it easily while performing a Bluetooth or Wi-Fi search. 1. Select the Settings tab then click on Friendly name. 2. Enter the new name then click on Apply. Modifying the PIN code If you are using the Zikmu with a Bluetooth device with a fixed PIN code which is not « 0000 », you can modify the PIN code of your speakers. 1. Select the Settings tab then click on Bluetooth. 2.
RCA You can connect your audio player (ex: CD player) to the speakers via a Jack – RCA cable to stream music. Connect the audio player to one of the speakers - the music will be sent via Bluetooth to the other speaker. Make sure that the connectors are inserted properly to avoid any disruption. Notes : - To get the best possible sound performances, use a high quality Jack / RCA cable. - To avoid any problem of sound saturation, increase the volume on the Zikmu rather than on your audio player.
Audio Parameters Use the Zikmu web interface or the Parrot Audio Configuration Tool software to modify the parameters below. ► Refer to the Using the web interface and Establishing the connection with the Parrot Audio Configuration Tool software for more information. Using the Random and Repeat options The Random and Repeat options are available on the Zikmu web interface. They are only active if you are using the Zikmu with an iPod / iPhone or a UPnP peripheral.
You can choose one of the 7 equalizer presets (including Flat, Vocal, Pop…) to suit the style of music you are listening to. If you don’t find one corresponding to your preferences, you can create your own presets while a song is playing. To do so, select Custom. Using the equaliser on Parrot Audio Configuration Tool To access this option, select the Audio tab. Set up your preferences on bass, midrange and treble frequencies by dragging the left, middle and right sliders respectively.
Controlling the balance To control the balance setting, select the Audio tab. Drag the Balance slider to change the balance between left and right speakers. If the iPod / iPhone docking station is not on your right, select the Swap left / right option to reverse the output. Using the Audio Mixer The audio mixer avoids big volume level jumps between several audio sources thus avoiding problems such as a too high volume level after an audio source change.
Using the high volume ramp-up The High volume Fade-in or High volume ramp up option allows you to define the time the sound will take to get to the volume defined on the Audio mixer. Using the web interface To get to this option, select the Settings tab then click on Audio. Select the Enable option then drag the slider to the desired level. When the slider is positioned to the left, it approximately takes 20 seconds to reach the defined volume.
Adjusting the room compensation level Note : The room compensation level can also be defined using the web interface. Refer to the Using the web interface section for more information. Depending on the material of your walls or on the presence of furniture, the acoustic environment of the Zikmu can be either absorptive (like in a recording studio) or reflective (like in a church or a bathroom). This is called room compensation or damping.
Software update Depending on the computer you are using, there are several methods to update your Zikmu: - Using a PC via Wi-Fi - Using a PC via Bluetooth with the Widcomm Bluetooth software - Using a PC via Bluetooth with the Toshiba Bluetooth software - Using a Mac Updating the Zikmu with a PC via Wi-Fi Use the web interface to perform the software update of your speakers. ► Refer to the Using the web interface for more information. If a new software update is available, a pop-up will be displayed.
2. Click on Browse and select the Zikmu. 3. Select the Use an access key and enter “0000”. Windows 7 1. Right click on the previously downloaded update file and select Send to > Bluetooth > Other devices. 2. Select the Zikmu. Toshiba Bluetooth software 1. Right-click on the downloaded update file and select Bluetooth > Search for other peripherals. 2. Select the Zikmu and click on Send.
Updating the Zikmu with a Mac 1. Click on the icon and select System Preferences. 2. Double-click on the 3. Click on icon. and select Send File. 4. Select the downloaded update file and click on Send. 5. If a PIN code is requested, enter « 0000 ».
