FF EO K TA QUICK START GUIDE GUIDE D’UTILISATION RAPIDE GUÍA DE UTILIZACIÓN RÁPIDA SCHNELLSTART-ANLEITUNG GUIDA DI RIFERIMENTO RAPIDO BEKNOPTE GEBRUIKSHANDLEIDING GUIA DE UTILIZAÇÃO RÁPIDA دليل المســتخدم المختصر
English........................................4 Français................................... 25 Español.................................... 46 Deutsch................................... 67 Italiano .................................... 88 Nederlands............................ 108 Português.............................. 128 ................................
On/Off button TAK 1. Connect the micro USB cable to the Parrot Flypad’s micro USB port. 2. Connect the USB port to a computer or a USB power adapter. >> The charge LED turns red to indicate that charging is in progress. Once charging is complete, the LED turns green. The charge time is approximately 2 hours. Once charged, the Parrot Flypad has a battery life of about 6 hours.
1. Secure the smartphone holder’s tab in the Parrot Flypad’s slot. ENGLISH CONNECTING THE PARROT FLYPAD TO YOUR DRONE 1. Turn on your drone. 2. Press the Parrot Flypad’s ON/OFF button to turn it on. >> The Parrot Flypad’s warning light flashes green and then becomes a steady green when the connection is established. You are connected to the drone, and you can fly it. ATTACHING THE SMARTPHONE HOLDER 2. Screw on the holder.
3. Fit your smartphone in the holder. 4:21 PM 22% My flights Builder nodesign 06 98% START CONFIGURING THE PARROT FLYPAD’S BUTTONS ENGLISH PARROT CONNECT YOUR SMARTPHONE TO THE PARROT FLYPAD AND THE PARROT DRONE 1. Make sure your Parrot Flypad is switched off. 2. Turn on your Parrot drone. 3. Place the Parrot drone on a flat surface with the propellers up. 4. Wait until the warning lights on the Parrot drone turn green. 5.
8. In the FreeFlight Mini application, press 2. In the application, press the function you want to change to select it. 3. On your Parrot Flypad, press the button you want to assign the function to. >> T he button and the function are associated. 9. Press to display the drop-down list. 10. Select your Parrot Flypad. >> The warning light on the Parrot Flypad turns green: you are connected. You can configure the buttons of the Parrot Flypad. To return to the default settings, press Reset.
12 Steady green light The Parrot Flypad is connected to the Parrot drone or your smartphone. Flashing green light The Parrot Flypad is waiting for a connection. Flashing red light The Parrot Flypad is waiting for a connection, but its battery is low. > Charge the Parrot Flypad’s battery. Steady red light The Parrot Flypad is connected to your smartphone or your Parrot drone, but its battery is low. > Charge your Parrot Flypad’s battery.
DECLARATION OF CONFORMITY IN CANADA This device complies with the Industry Canada RSS applicable to license-exempt radio apparatus. Operation is permitted subject to the following two conditions: (1) the device must not produce interference, and (2) the user of the device must accept any radio interference encountered, even if the interference is likely to compromise operations.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.