V2 CLESS Notice d’utilisation User Manual V2 CLESS – NOTICE D’UTILISATION - USER MANUAL v1.
AVANT-PROPOS INSTALLATION. Nous vous recommandons de lire attentivement cette notice. Elle est jointe à votre lecteur V2 CLess pour vous donner les indications nécessaires à son installation. UTILISATION. Une fois votre lecteur V2 Cless installé, vous pouvez l’utiliser. GARANTIE. SECURITE. Afin de bénéficier de la garantie attachée à cet appareil, et afin de respecter les consignes de sécurité, seul une personne agrée peut effectuer les opérations de montage ou de démontage et installer le lecteur.
1.CONSIGNES DE SECURITE A- Pour mettre votre lecteur V2 Cless hors tension : Déconnecter l’alimentation du lecteur V2 Cless du réseau d’alimentation électrique. B- Réseau d’alimentation électrique a. N’utiliser que des câbles Parkeon prévus pour les lecteurs Cless b. N’utiler que le câble d’antenne Parkeon avec ses ferrites spéciales CEM c.
2.DEBALLAGE. CONSTITUTION DU PRODUIT Conserver soigneusement l’emballage de votre V2 Cless et de l’antenne, ils devront être réutilisés pour tout transport. V2 CLESS – NOTICE D’UTILISATION - USER MANUAL v1.
3. DESCRIPTION DU LECTEUR HF Rappel des consignes de sécurité : Choisir l’alimentation électrique recommandée provenant de chez Excelsys COM0 INTERRUPTEUR SMB SERVEUR Connectique du lecteur V2 Cless COM0 = liaison série pour debuguage (option) SMB = connecique RF pour l’antenne HOST = liaison série + alimentation SWITCH = switch de détection de badge (option) V2 CLESS – NOTICE D’UTILISATION - USER MANUAL v1.
Diagramme de connection COM4 Com 4 Central Unit Unité centrale Power supply de converter Convertisseur tension Antenna cable Câble d’antenne Access Câble du lecteur Cless Contactless reader cable Antenna support Support d’antenne Contactless reader Lecteur Contact Less • Câble du lecteur Cless L’alimentation et la communication du lecteur sans contact avec le connecteur de carte fond de panier sont effectués via un câble identifié par « CLESS » et « PC – POWER CLESS » • Câble d’antenne L’antenne
4.INSTALLATION DU V2 CLESS 4.
4.2 Antenne • • Connecter le câble d’antenne Fixer la sur les quatre vis V2 CLESS – NOTICE D’UTILISATION - USER MANUAL v1.
5.
6. UTILISATION JOURNALIERE Il n’y a pas d’attention particulière à respecter. Nettoyer l’antenne tous les ans avec de l’alcool Isopropylique. V2 CLESS – NOTICE D’UTILISATION - USER MANUAL v1.
7. CARACTERISTIQUES DU V2 CLESS Caractéristiques physiques Masse : environ 400g (sans câbles) Dimensions : environ 166x79x35 mm (L x l x H) Normes Voir en annexe la “marquage CE de conformité” aux normes Conditions d’exploitation Matériel de classe II Alimentation électrique Consommation maxi : 12VDC +/- 10% : 0.5 A Température ambiante Humidité relative max. : -25°C à +70°C : 95% à +55°C Liaison série : RS-232 Conditions de stockage Température de stockage : -20°C à +85°C Humidité relative max.
8.
FOREWORD INSTALLATION. We recommend you to read these instructions very carefully. They are included with your V2 Cless Reader in order to explain its installation. USE. Once it is installed and equipped with the application you case use your V2 Cless reader. GUARANTEE AND SAFETY. In order to benefit from the guarantee on this equipment and in order to follow the safety instructions, only authorized person shall entrust assembly or disassembly procedures and installed the reader. CONTENTS 10.
10.SAFETY INSTRUCTIONS D- In order to power down your V2 CLess : Disconnect the V2 Cless power supply block from the electric power supply network E- Electrical power supply a. Only use Parkeon Contacless reader cable b. Only use Parkeon antenna cable with it’s Ferrite for EMI protection c.
11.UNPACKING. PRODUCT CONTENTS Carefully preserve the packaging of the V2 Cless and the antenna. It must be re-used whenever the reader is shipped. V2 CLESS – NOTICE D’UTILISATION - USER MANUAL v1.
12.DESCRIPTION OF THE HF READER Reminder of Safety Instructions : Select the recommended electrical Power from Excelsys COM0 SWITCH SMB HOST V2 Cless connections COM0 = serial link for debug (option) SMB = RF antenna connection HOST = Serial link + power supply SWITCH = Badge detection switch (option) V2 CLESS – NOTICE D’UTILISATION - USER MANUAL v1.
Diagram of connection Com 4 Central Unit Power supply converter Antenna cable Access Contactless reader cable Antenna support Contactless reader • Contactless reader cable Power supply and communication of contactless reader with the card connector is made via a cable labeled "CLESS" and "PC" - "POWER CLESS". • Antenna cable The antenna is connected to the contactless reader by means of a cable with an angled SMB coaxial connector and an angled SMB coaxial connector.
13.INSTALLING THE V2 CLESS 4.1 Module Tools required: Philips head screwdriver Time required for the intervention: 2 min Other components to remove/Preliminaries: switch off the power to the devices in EMS mode or with the button on the front of the CPU. • Disconnect the antenna cable and the contactless reader cable. • Slightly unscrew the two fastening screws with a Philips head screwdriver. • Unscrew the two bolts holding the drive module.
4.2 Antenna • • Connect the antenna cable. Put it on the four screws. V2 CLESS – NOTICE D’UTILISATION - USER MANUAL v1.
14.INSTALLING AND REMOVING SECURITY ACCESS MODULES Tools required: key 8 Time required for the intervention: 8 + 3 min • • Unscrew the screw that locks the access trap SAMs. Rotate the trap to access locations of SAMs. Locking Screw SAMs slot Contactless reader • • • • • • Access trap SAMs Remove the SAMs their modules. Set new in empty slot positions. Replace the contactless reader. Connect the cables on the previous contactless reader. Press the power button device of the CPU.
15. DAILY USE No specific care shall be done. Clean the antenna each year with Isopropanol V2 CLESS – NOTICE D’UTILISATION - USER MANUAL v1.
16. V2 CLESS CHARACTERISTICS Physical Characteristics Mass : approximately 400g without cable Dimensions : approximately 166x79x35 mm (LxWxH) Standards See “EC standard compliance marking” in appendix Operating conditions Class II equipement Electric supply network Max. consumption : 12VDC +/- 10% : 0.5 A Ambiant temperature Max.
17.
© Copyright 2010 Parkeon. All rights reserved. Parkeon reserves all proprietary rights relating to the contents of this document.Parkeon Reserves all rights over usage, reproduction, representation, marketing, translation, adaptation Or modification, and generally all rights over present and future utilisation by any means, for any Purpose and in any territory, throughout the period of protection. All use of the contents of this Document requires the prior written permission of Parkeon.