CAL TN ETS RES 1. ABOUT LASER LIGHT Never look Into the presto lens when the laser Is muted on; this can result In eye damage Do nat try to dismantle the projector. It contains a high-power laser component; attempting ta modify can result in serious injury. Do not allow children ta aerate the projector. They must be accompanied by an adult for use 2. HIGH TEMPERATURE Do not place anything that can become warped or damaged by heat near the vents.
11 Pac Parishioner Laser Projector Re mate Control AAA Battery Power Cord Cleaning Cloth User Manual Quick Start Guide oz Contents
5. Height Adjusting Wheels 7.UsB2.0 Reactionary 8 USB Port 9. HDMI Input 1 10. HDMI Input 2 (ARG) 11. Audio Output 12. AV Input 13. Ethernet Port 14. Power Port 15. Rear Foot 16. Speaker Air Vents 17.
REMOTE CONTROL +a 5 CoN hoed 9° 190! Power 2 Indicator Light 3 Mute a.up 5. Left 6.0K 7. Right 8 Down 9. Return 10. Settings 1. Home 12. Signal 13. Menu 14. Volume 15. Volume + 16.
Display Type DLP Light Source Laser Throw Rate 0.233 Projection Size Up to 150” Resolution aK Luminescence Uniformity | > 80% Contrast Ratio > 2000:1 (FOO) Color Gamut Rec 708 System Android 9.
Speaker 50W Bluetooth In Yes (connect with mobile phone) Bluetooth Out Yes (connect with Bluetooth speaker} DTS HD Yes (decoding) Dolby Audio Yes (decoding) HDMI 2 ports {1 with ARC) uss 2(5V DC,1500mA) Video In AV (3.5mm) Audio Out Line out 1 (3.5mm) and SOLIDIFY 1 Internet Wired and wireless (802.
PREPARATION Install the electrical outlet near the equipment. It should be easily accessible.
INSTALLING THE PROJECTOR Place the projector on the desk. Move to an appropriate distance for the desired image size while keeping the device parallel with the wall. Connect the projector to a parer source and press the Power button on the device of remote to tum It on.
1. MOTION DETECTION There are twa PIR motion sensors at the front of the projector; when It detects human approaching, the projector will dim the brightness of the laser light to prevent any potential eye damage. This function ls active by default and can be disabled in Settings -> General. Press any button on the remote control and the laser light wil restore to normal brightness level 2.
3. DOLBY AUDIO AND DTS DECODING The projector supports Dolby Audio and DTS {dedicated to sound) decoding, perfect for a home theater 1) Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories. 2) For DTS patents, see dts com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS and the Symbol together, D TS-HD, and the D TS-HD logo are registered trademarks and/or trademarks of DTS, Inc.
1. POWER ON/OFF Connect the projector to a power source. Press the Power button on the projector or the remote to power it on / off 2.
3. USER INTERFACE OVERVIEW There are 2 parts on the homepage: Inputs and Tools + Signal source: HOM, HDMI and AV Tools: File Manager, App Manager, Local Application, Setting end Help. On tap you can see the Network, Toothbrush, and the time. 4. CONNECTION WITH PERIPHERALS You may connect PS4 Gama console, ROKU TV, computer, stew, via the HDMI port, DVD device by the AV port, USB device/keyhoard/mouse by the USB port (refer to 5. Ails Management), or professional audio by 8/PDIF or LINE QUT port.
RAW: No processing for the source audio. Recommended for Dolby Audio and DTS sources for better performance. HDMI ARC: Output the sound via the HDMI ARG port 5.
1} internal Ash You can save files to the projector stags, including the apps downloaded, flies downloaded In the app, fells In the USE drive, etc 2) Using the USB drive Plug In the USB drive and view flies on the Interface 3) Net Hood You can view files shared by other devices on the same network by Nat Hood. 6. SEARCHING FOR / INSTALLING / DELETING APPS The device comes equipped with the Android 9.0 system and the application store. It supports downloading and installation of over 300 apps.
7. PAIRING VIA BLUETOOTH Select the Bluetooth loon at the top right comer to enter the Bluetooth Interface. 1) Use as Toothbrush speaker Tum on Open Detection, select Input for Audio Mode on the Interface, find and select the projector model under Bluetooth Devices on your phone or laptop to play laud via the bull Tin speaker of the projector {go to Settings -> General -> Device Name to check the Bluetooth name of the projector).
8. NETWORK SETTING Select the Network can at the top right corner to enter the network setting interface. For wired connection, plug In the Ethernet cable. For wireless connection, find the network name on the drop-down lst, select, and enter the password to connect.
©. SYSTEM UPGRADE OTA update Slacks Settings -> About -> Check for Updates to update the system 10.
1} Image Settings You can select the image made or adjust the brightness, contrast, chrome, hue and definition 2) Advanced Settings You can select the MEME mode or adjust the dynamo contrast, color temperatures, refresh rate or reset to factory settings 3) Light Sours Settings You can select the light source mods or adjust the light source brightness.
11. PLAYBACK SETTINGS When playing videos, press the Menu button to prompt a sidebar menu which includes the followings: Video ratio, Sound track, Subtitle, Playback settings, Cycle mode, and Audio Effect 12. MOUSE MODE Go to Settings -> General -> Mouse Mode -> On/Off to entertainer Mouse mode.
Be tare cleaning, unplug the power cord from the socket. Wipe the exterior of the projector routinely with the provided cleaning cloth or a cloth designed for professional use. Do not apply abrasive detergent, solvent or other coarse chemicals to avoid scrapes. Leave plenty of space around the vents for heat dissipation Do not place anything blocking the speaker for better sound Disassembling the device will not only nul the warranty but may also cause harm to your ar others’ safety.
Q: Dol ends to prepare a screen for projection? Az For optimal performance, project onto a flat wall with only one color, preferably white. However, using a recommends screen can provide the best experience. Q: The motion detection Is not working. A= Make sure the sensor Is not blocked and the function Is active In Settings Q: The remote control lat working.
Q: The Image lent clear/there Is no Image. A: Make aura the original video is in high definition. Check that the practical ls In focus: go to Sat tings > Image -> Electric Focus to adjust accordingly Power off the device and unplug the power cord. Plug It again after 1 min and power on tha device. Qz How do | choose the audio output? A: When connecting to a speaker In Settings, there are two output captions: PCM and RAW. For PGM output, the audio source Is decoded.
©: The system prompts a message of high temperature and the device shuts off automatically. A: Make sure the device Is working In a proper lambent temperature (within the device's working temperature tangs) and that the vents are not blocked. Restart the device @= The device cannot be powered on. A: Check whether the device is connected to parer properly and that the socket connects to electricity.
WARRANTY AND SERVICE We wll provide you with after-sales service based on specific local policies. Please contact your local sales representative or after-sales team for more details.