User Guide

FAQ

1. When you meet this problem” The disagreement between the coordinates of the

tablet and the coordinates of the screen”, how to upgrade the firmware of Ninos

M/S? (Windows Only)

After the firmware version is upgraded, the tablet will be divided into PC mode and Android mode. The

default is PC mode, which can be switched according to needs.

(Method of switching between the two modes: press and hold any two keys on the tablet at the same

time for more than 3 seconds. After releasing the keys, the indicator light will flash 3 times quickly,

indicating the mode switch is successful.)

1.1 Before upgrading, disable the tablet drive (The below

①②③

drivers all need to be deleted) in the

task manager (1. Right-Click on the taskbar and choose Task Manager from the menu; 2. Right-click the

below circled files and click "End task.)

Firmware Upgrading Steps:

1.2 After decompressing the compressed package to the local, open the folder and double-click the

executable application file named "ParbloIAP_English.exe".

1.3 After connecting to the device, " 'Parblo Ninos M' Connected" appears on the interface, indicating that

the device has been successfully connected.

PAGE 1
FAQ 1. When you meet this problem” The disagreement between the coordinates of the tablet and the coordinates of the screen”, how to upgrade the firmware of Ninos M/S? (Windows Only) After the firmware version is upgraded, the tablet will be divided into PC mode and Android mode. The default is PC mode, which can be switched according to needs. (Method of switching between the two modes: press and hold any two keys on the tablet at the same time for more than 3 seconds.
PAGE 2
1.4 After the upgrade is complete, close the dialog box. 2. How to setup Ninos S/M on macOS 10.14 and above? After installing the driver: 1.1 Open the "ParbloTabletSetting" under the Launchpad. 1.2 Open the "System Preferences" under the Launchpad, find the "Security & Privacy" to enter. 1.3 Unlock Security & Privacy preferences. 1.4 Go back to "Privacy" and tick “ParbloTabletSetting". 1.5 Finally you can open the “ParbloTabletSetting" to setup.
PAGE 3
. How to setup express keys for Ninos M/S? 1.1 Open the "ParbloTabletSetting" to enter. 1.2 Find the "Express Key". k1=k1, K2=K2, ... and so on. Select and set the corresponding shortcut keys according to your own needs. 1.3 K1 = ParbloTabletSetting/Program/Hotkey. It means if you press the KI key, and the corresponding software will be opened. Now we use "Program" set up to be an example: 1.3.