User Manual for Ninos M Graphics Tablet Key Warnings: 1. Do not disassemble or refit the device. Damages such as heating, fire hazard, electric shock and personal injury may be caused if you don’t follow such instruction. The warranty will be void in case of any disassembly; 2. Do not excessively bend the USB cable to avoid any damage. Damaged or broken USB cables, or any touch with water and other liquid may cause malfunction, fire hazard and electric shock; 3.
User Manual Outline I Product Overview 1. Product Diagrams II Connection Methods 1. Ninos M Connection Methods 2. Computer System Requirements III Install Drive Programs 1. Installation Notes 2. Windows 3. Mac IV Introduction to the Driven Page 1. Windows 2. Mac V Remove Drive Programs 1. Windows 2.
I Product Overview Ninos M Diagrams Figure 1-1 Diagrams II Connection Methods How to Connect the Ninos M Graphics Tablet to Your Computer: The graphics tablet can work with computer and Android devices (the default option is to work with computer). Users can refer to the following ways to switch its working modes between computer and Android device: (1) Simultaneously press any key for 3s, then release them.
Figure 2-1 Computer Connection 2, Android Mobile & Android Laptop Connection (1) Turn on the OTG function in mobile (laptop) settings (the default option of some devices is to turn on the OTG function, so you can ignore this step); (2) Insert the OTG adapter into your mobile (laptop); (3) Separately connect the cable’s USB and Type-C port to the OTG adapter and graphics tablet, and meanwhile keep the mobile (laptop) and graphics tablet upright (refer to the figure 2-2); (4) Keep the mobile (laptop) and grap
III Install Drive Programs Support the following operating systems: Windows OS 10, 8 and 7 Mac OS 10.
IV Introduction to Drive Functions Windows Find the Parblo icon on the desktop, and double click to open the drive page of the graphics tablet. You can also find the Parblo icon corner of the screen, and click to open; Figure 4-1 Windows Drive Page 1. Pen Settings Interface 1.
Test whether there is pressure change during drawing in the area. Figure 4-2 Pressure Testing Area 1.2 Pen Key Settings Set functions of 2 keys in the drawing pen according to your needs. Select hot keys to customize settings in the drop-down list; Figure 4-3 Pen Key Settings Note: Click keys to activate functions only when the graphic drawing pen is within the sensing height (below 10mm) of Ninos M graphics tablet.
The current pressure shows the pressure sensitivity value. 1.3.1 The default pressure sensitivity—medium pressure Figure 4-4 Medium Pressure 1.3.2 High pressure sensitivity—softer pressure Figure 4-5 Softer Pressure 1.3.
Figure 4-6 Harder Pressure 1.4 Coordinate Mode “Absolute” indicates that the graphics tablet matches the coordinate position on display; “Relative” indicates that the position of the graphics tablet relatively maps the screen’s resolution ratio site (also known as mouse mode) Figure 4-7 Coordinate Mode 1.5 Window Ink Check such function to support Windows handwriting tablet protocol, and partial drawing software support Window Ink function.
Figure 4-9 Area Settings 2.1 Display Settings Users can select the control area of the graphics tablet as the whole or single display; 2.2 Whole Display The working area of the graphics tablet can map the whole are of the display; 2.3 System Display Settings Users can set the computer’s screen resolution and multi-screen working mode; 2.4 Rotation Settings User can set the angle of Ninos M graphics tablet, and 0° is the default (it means that it can be used on the left).
Figure 4-10 Key Settings Notes: A. Set the input language to English when you are using shortcut keys, otherwise some functions may fail to work; B. The default function of shortcut keys is the selected Photoshop command. You can set them according to your needs; 3.1 Key Settings The default setting of Parblo is the shortcut functions of Photoshop, and you can customize the functions of K1, K2, K3, K4, K5, K6, K7 and K8. Click the drop-down list to select “Hot Keys” and enter the self-defined interface.
Figure 4-12 Self-defined Key 2 3.2 Turn off Prompts & Disable Shortcut Keys Check “Turn off Prompt”, and no function names will be prompted during your use; Check “Disable Shortcut Keys”, and keys’ functions fail to work. 3.3 Self-defined Options Figure 4-13 Self-defined Option 1 The default configuration is Parblo built-in buttons (Photoshop), you can click Add to configure customized button functions for more software.
Figure 4-14 Self-defined Option 2 Figure 4-15 Self-defined Option 3 13
Click the added software icon to set the software's customized button function for the button; Select the software icon and click “Remove” to delete the current software configuration; Click “Reset” to restore the default settings. 4, Configuration Settings Figure 4-16 Configuration Settings You can save and read the set value by exporting & importing the configured shortcut keys and other functions.
Figure 4-18 Import Configuration 5, About Figure 4-19 About 15
Show the curre nt driver version: 3.2.1.6 Mac You can find the Parblo icon in the Launchpad, then click to open the drive interface.
1.1 Pen Settings Set functions of 2 keys in the drawing pen according to your needs. Select hot keys to customize settings in the drop-down list, and click “Default pen settings” to restore keys’ functions to factory default settings; Figure 4-22 Pen Settings Note: Click keys to activate functions only when the graphic drawing pen is within the sensing height (below 10mm) of Ninos M graphics tablet. The current keys’ function will show at the bottom of the display after you press keys; 1.
Figure 4-24 Rotation Angles 1.4 Pressure Settings The change of the “Input” and “Pressure” curve will adjust its pressure sensitivity. The bottom pressure line shows the current pressure sensitivity value. Figure 4-25 Pressure Test 1.5 Coordinate Mode “Absolute Coordinate” indicates that the graphics tablet matches the coordinate position on display; “Relative Coordinate” indicates that the position of the graphic drawing pen relatively maps the screen’s resolution ratio site (also known as mouse mode).
Figure 4-26 Coordinate Mode 2, Display Settings Users can select to make the graphic drawing pen control the whole display or main display/external display; Users can select “Custom Screen Area” to adjust the display area controlled by the graphics tablet.
Figure 4-28 Screen Setting 2 3, Working Area Settings 1.1 Whole Working Area It indicates that the whole working area maps the display, meaning that the whole working area of the graphics tablet controls the current display that has been selected.
Figure 4-29 Working Area Setting 1 1.2 Display Scale 1.2.1 Users can adjust the working area scale according to the display scale; 1.2.2 Users can adjust the working area size, and drag the red wireframe to set.
Figure 4-30 Working Area Setting 2 4, Key Settings 22
Figure 4-31 Key Settings Notes: A. Set the input language to English when you are using shortcut keys, otherwise some functions may fail to work; B. The default function of shortcut keys is the selected Photoshop command. You can set them according to your needs; 4.1 Key Settings The default setting of Parblo is the shortcut functions of Photoshop, and you can customize the functions of K1, K2, K3, K4, K5, K6, K7 and K8. Click the drop-down list to select “Self-defined” and enter the self-defined interface.
Figure 4-33 Hot Key Setting 2 Click “Hot Key Settings” to customize the function of shortcut keys for different software; a Click “+” 24
Figure 4-34 Self-defined Software Hot Key 1 b Select software that you want to add 25
Figure 4-35 Self-defined Software Hot Key 2 c Set functions for each shortcut key in sequence 26
Figure 4-36 Self-defined Software Hot Key 3 5, Configuration File Figure 4-37 Configuration File You can save and read the set value by exporting & importing the configured shortcut keys and other functions. Note: When all the shortcut key functions are set, you can click "Export Configuration" to save your settings.
Figure 4-38 Export Figure 4-39 Import 28
6, About Figure 4-40 About 1.3 Diagnostic Tools 1.3.1 Diagnostic tools can show the current “hardware information”, “environment information” and “pen coordinate information”; 1.3.2 Click “firmware download” and the page will turn to the parblo support page to download the corresponding upgraded firmware files; 1.3.3 Click “firmware upgrade” to upgrade the current product and update the firmware version.
Figure 4-41 Diagnostic Tools V Remove Drive Programs Windows Go to “Start Menu—Settings—APP” interface to find “parblotabletsetting”, then click “remove” and accomplish the removal according to instructions.
Figure 5-1 Remove (Windows) Mac Go to Finder—APP to find and open “ParbloTablet”, then find and double click “uninstallParbloTablet” to remove according to instructions. 000.
Figure 5-2 Remove (Mac) 32
VI Frequently Asked Questions and Solutions 1. After installing the driver, it displays "device not connected", what should I do? (1) Check whether the connection between the USB cable and the tablet and computer port is loose. (2) Check whether the digital pen and the tablet are within the effective sensing height or whether the LED indicator of the digital tablet flickers when they touch the tablet. If they flicker, the communication is normal.
( 4 ) Turn on this computer, and open it in the C drive: Users\"computer user name"\AppData\Roaming\Adobe\Adobe Photoshop 2020\Adobe Photoshop 2020 Settings\PSUserConfig.txt, the following window will pop up, put the number "0 "To "1". (5) Restart Photoshop, if there is still no pressure, go to step 6. (6) Uninstall and reinstall the driver, and restart the computer. 4. What should I do if there is no pressure in painting in sai2? (1) Open sai 2 and select "Settings" under "Help".
(2) Check "Use Windows API" and click "OK". (3) Set the minimum brush size to 0%. 5. What should I do if there is no pressure in painting in AI? Take AI2020 as an example: (1) Select the brush tool and open the "brush options" in the brush drop-down list.
(2) In the brush options window, select the brush size as "pressure" (3) Set the pressure sensitivity variable size equal to the brush size such as "5", click "OK".
6. How to set up and use Parblo Tablet driver in macOS? macOS Mojave (10.14) system (1) After completing the driver installation, the system will automatically pop up the following prompt when the tablet or screen is recognized for the first time: (2) Please click the "Open System Preferences" button, and then open "Security and Privacy".
(3) On the "Accessibility" setting, click the "Press Lock" button, and then enter the administrator password system for authorization.
(4) Please click the "+" button, search for "ParbloTabletDriver" in the search box, select "ParbloTabletDriver", and then click the "Open" button.
(5) Please click the "press lock" button to lock.
(6) Turn off "Security and Privacy" and restart the system. When the system enters the desktop, open "ParbloTabletSetting" on the launchpad to use it. macOS Catalina (10.15) and higher (1) After completing the driver installation, first set the permissions of the same "macOS Mojave (10.14) system" as above, and then on the "input monitoring" setting, click the "press lock" button to enter the administrator password system for authorization.
(2) Please select "ParbloTabletDriver".
(3) Please click the "press lock" button to lock.
(4) Turn off "Security and Privacy" and restart the system. When the system enters the desktop, open "ParbloTabletSetting" on the launchpad to use it. 7.What should I do if the pen on the tablet does not work? (1) Check whether the connection between the USB cable and the tablet port and computer port is loose. (2) Check whether the digital pen and tablet are within the effective sensing height or whether the LED indicator of the tablet is flickering when touching the tablet.
8. How to solve the problem that the white circle can't be drawn or the right button pops out after the pen is long pressed? (1)Find the "Control Panel" on your computer. (2) Find "Pen and Touch" in "Control Panel" and open it. (3) Click "Long press, right-click", and then click "Settings" to open the long press setting window.
(4) Do not check "Use long press as right-click" and click "OK" twice.
9. What are the Android device APPs compatible with the product? Remarks: The Android version of the device must be 6.0 and above. The low battery of the device will affect the connection.
画板涂鸦 概念画板 画世界 画吧 爱笔思 medibang Flipaclip procreate jamboard √ √ √ √ √ √ √ √ √ / √ √ √ √ √ √ √ / 10. How to connect the Ninos M tablet to an Android device? (1) Turn on the OTG switch on the Android phone (tablet) (some devices are turned on by default, please ignore). (2) Choose the OTG adapter that fits the interface of your mobile phone (tablet computer) and insert it into your mobile phone (tablet computer). (3) Then connect the USB head to the OTG adapter, and the Type-c port to the digital tablet.
(5) This tablet supports connection with a computer and an Android device. The factory default is the computer mode. To solve the problem of the coordinate direction of the tablet, you can switch between the computer mode and the Android device mode in the following ways. a. Press and hold any two buttons on the tablet at the same time for more than 3 seconds and then release, the indicator light will flash 3 times quickly and then go out. At this time, the coordinate mode switch is completed. b.
2. Find the process that appears in the prompt box, right-click and select "End Task".
3. Reinstall the driver. Note: Before installing the driver, please turn off all anti-virus software and uninstall all other pen tablet or pen display drivers from the computer and restart the computer.