User Manual for Intangbo M Graphics Tablet I Product Overview 1. Product Diagrams II Connection Methods 1. Intangbo M Connection Methods 2. Computer System Requirements III Install Driver Programs 1. Installation Notes 2. Windows 3. Mac IV Introduction to the Driver Page 1. Windows 2. Mac V Remove Driver Programs 1. Windows 2.
I Product Overview Intangbo M Diagrams Figure 1-1 Diagrams (1) Working Area (2) Pen Slot (3) Custom Shortcuts (4) Mechanical Rotation (5) Rotation Switch Key (6) Working Indicator (7) USB Type-C Data Transmission Port II Connection Methods How to Connect the Intangbo M Graphics Tablet to Your Computer: The graphics tablet can work with computer and Android devices (the default option is to work with computer).
Figure 2-1 Computer Connection 2, Android Mobile & Android Laptop Connection (1) Turn on the OTG function in mobile (laptop) settings (the default option of some devices is to turn on the OTG function, so you can ignore this step); (2) Insert the OTG adapter into your mobile (laptop); (3) Separately connect the cable’s USB and Type-C port to the OTG adapter and graphics tablet, and meanwhile keep the mobile (laptop) and graphics tablet upright (refer to the figure 2-2); (4) Keep the mobile (laptop) and grap
click “.exe” 3, The green Parblo icon the installation package to install it; can be found on Taskbar in the lower-right corner of the screen after a successful installation. Please repeat the step 2 if you fail to find the small icon; Mac 1, Connect the USB Type-C cable to your computer and graphics tablet. The indicator will be off after flashes once, which indicates a successful connection; 2, Download the latest driver program on the official website of Parblo (www.parblo.com), then click “.
Figure 4-1 Windows Drive Page 1. Pen Settings Interface 1.1 Pressure Testing Area Test whether there is pressure change during drawing in the area.
1.2 Pen Key Settings Set functions of 2 keys in the drawing pen according to your needs. Select hot keys to customize settings in the drop-down list; Figure 4-3 Pen Key Settings Note: Click keys to activate functions only when the graphic drawing pen is within the sensing height (below 10mm) of Intangbo M graphics tablet. The current keys’ function will show at the bottom of the display after you press keys; 1.
1.3.2 High pressure sensitivity—softer pressure Figure 4-5 Softer Pressure 1.3.3 Lower pressure sensitivity – harder pressure Figure 4-6 Harder Pressure 1.
Figure 4-7 Coordinate Mode 1.5 Windows Ink Check such function to support Windows handwriting tablet protocol, and partial drawing software support Windows Ink function. Figure 4-8 Windows Ink 2, Area Settings Figure 4-9 Area Settings 2.1 Display Settings Users can select the control area of the graphics tablet as the whole or single display; 2.2 Whole Display The working area of the graphics tablet can map the whole are of the display; 2.
2.4 Rotation Settings User can set the angle of Intangbo M graphics tablet, and 0° is the default (it means that it can be used on the left). In case of other angles, please rotate the Intangbo M graphics tablet through the relevant angles clockwise; 2.5 Whole Area The graphics tablet’s whole working area maps the display; 2.6 Display Scale Users can adjust the scale of the working are according to the display scale; 2.7 Working Area Settings Users can set the effective working area of the graphics tablet.
Figure 4-11 Self-defined Key 1 Figure 4-12 Self-defined Key 2 3.
Figure 4-13 Rotation Settings The default functions of R1, R2 and R3: Mouse wheel, Canvas size (Photoshop), Brush size (Photoshop). R4, R5 and R6 come no functions, and you can click the drop-down list to define your settings according to your actual demands.
Figure 4-15 Self-defined Rotation 2 3.3 Turn off Prompts & Disable Shortcut Keys Check “Turn off Prompt”, and no function names will be prompted during your use; Check “Disable Shortcut Keys”, and keys’ functions fail to work. 3.4 Self-defined Options Figure 4-16 Self-defined Option 1 The default setting is the Parblo built-in key + rotation function (Photoshop), and you can click to add in order to configure more software with self-defined keys’ functions.
Figure 4-17 Self-defined Option 2 13
Figure 4-18 Self-defined Option 3 Click the software icon that has been added to customize its key and rotation functions; Select the software icon and click “Remove” to delete the current software configuration; Click “Reset” to restore the default settings. 4, Configuration Settings Figure 4-19 Configuration Settings You can save and read the set value of functions such as shortcut keys and rotation via export and import configuration.
Figure 4-20 Export Configuration Figure 4-21 Import Configuration 5, About 15
Figure 4-22 About Show the current driver version: 3.2.1.6 Mac You can find the Parblo icon in the Launchpad, then click to open the driver interface.
Figure 4-24 Driver Interface 1.1 Pen Settings Set functions of 2 keys in the drawing pen according to your needs. Select hot keys to customize settings in the drop-down list, and click “Default pen settings” to restore keys’ functions to factory default settings; Figure 4-25 Pen Settings Note: Click keys to activate functions only when the graphic drawing pen is within the sensing height (below 10mm) of Intangbo M graphics tablet.
1.2 Configuration Settings Check “No Pressure” to turn off the pressure sensitivity function; Check “No Prompt” to turn off the key/rotation function prompt; Check “No Shortcut Key Function” to turn off the key function. Figure 4-26 Configuration Settings 1.3 Rotation Settings The default working mode is 0° (it means that it can be used on the left); You can adjust the laying style of Intangbo M graphics tablet according the way that you hold pens, and now it supports 4 working angles.
Figure 4-28 Pressure Test 1.5 Coordinate Mode “Absolute Coordinate” indicates that the graphics tablet matches the coordinate position on display; “Relative Coordinate” indicates that the position of the graphic drawing pen relatively maps the screen’s resolution ratio site (also known as mouse mode). Now, only graphics tablet supports such mode, instead of graphic drawing monitor.
Figure 4-30 Screen Setting 1 Figure 4-31 Screen Setting 2 3, Working Area Settings 1.
It indicates that the whole working area maps the display, meaning that the whole working area of the graphics tablet controls the current display that has been selected. Figure 4-32 Working Area Setting 1 1.2 Display Scale 1.2.1 Users can adjust the working area scale according to the display scale; 1.2.2 Users can adjust the working area size, and drag the red wireframe to set.
Figure 4-33 Working Area Setting 2 4, Key/Rotation Settings Figure 4-34 Key/Rotation Settings Notes: 22
A. Set the input language to English when you are using shortcut keys, otherwise some functions may fail to work; B. The default function of shortcut keys is the selected Photoshop command. You can set them according to your needs; C. The key in the middle of the rotation is set to switch the rotation’s functions. 4.1 Key Settings The default setting of Parblo is the shortcut functions of Photoshop, and you can customize the functions of K1, K2, K3, K4, K5, K6, K7 and K8.
Figure 4-36 Hot Key Setting 2 Click “Hot Key Settings” to customize the function of shortcut keys for different software; a Click “+” 24
Figure 4-37 Self-defined Software Hot Key 1 b Select software that you want to add Figure 4-38 Self-defined Software Hot Key 2 25
c Set functions for each shortcut key in sequence Figure 4-39 Self-defined Software Hot Key 3 4.2 Rotation Settings The default functions of R1, R2 and R3: Mouse wheel, canvas size (Photoshop), brush size (Photoshop). R4, R5 and R6 come no functions, and you can click the drop-down list to define your settings according to your actual demands.
Figure 4-40 Rotation Setting 1 Click “Self-defined” to set left/right rotation, and users can name such function. Figure 4-41 Rotation Setting 2 Click “Rotation Settings to customize rotation function for each software.
a click “+” Figure 4-42 Self-defined Software Rotation 1 b Select software that you want to add 28
Figure 4-43 Self-defined Software Rotation 2 c Set functions for each shortcut key in sequence Figure 4-44 Self-defined Software Rotation 2 29
5, Configuration File Figure 4-45 Configuration File You can save and read the set value of functions such as shortcut keys and rotation via export and import configurations. Note: When all the shortcut key functions are set, you can click "Export Configuration" to save your settings.
Figure 4-47 Import 6, About Figure 4-48 About 31
1.3 Diagnostic Tools 1.3.1 Diagnostic tools can show the current “hardware information”, “environment information” and “pen coordinate information”; 1.3.2 Click “firmware download” and the page will turn to the parblo support page to download the corresponding upgraded firmware files; 1.3.3 Click “firmware upgrade” to upgrade the current product and update the firmware version.
Figure 5-1 Remove (Windows) Mac Go to Finder—APP to find and open “ParbloTablet”, then find and double click “uninstallParbloTablet” to remove according to instructions. 000.
Figure 5-2 Remove (Mac) Key Warnings: 1. Do not disassemble or refit the device. Damages such as heating, fire hazard, electric shock and personal injury may be caused if you don’t follow such instruction. The warranty will be void in case of any disassembly; 2. Do not excessively bend the USB cable to avoid any damage. Damaged or broken USB cables, or any touch with water and other liquid may cause malfunction, fire hazard and electric shock; 3.
VI Frequently Asked Questions and Solutions 1. After installing the driver, it displays "device not connected", what should I do? (1) Check whether the connection between the USB cable and the tablet and computer port is loose. (2) Check whether the digital pen and the tablet are within the effective sensing height or whether the LED indicator of the digital tablet flickers when they touch the tablet. If they flicker, the communication is normal.
（ 4 ） Turn on this computer, and open it in the C driver: Users\"computer user name"\AppData\Roaming\Adobe\Adobe Photoshop 2020\Adobe Photoshop 2020 Settings\PSUserConfig.txt, the following window will pop up, put the number "0 "To "1". (5) Restart Photoshop, if there is still no pressure, go to step 6. (6) Uninstall and reinstall the driver, and restart the computer. 4. What should I do if there is no pressure in painting in sai2? (1) Open sai 2 and select "Settings" under "Help".
(3) Set the minimum brush size to 0%. 5. What should I do if there is no pressure in painting in AI? Take AI2020 as an example: (1) Select the brush tool and open the "brush options" in the brush drop-down list.
(2) In the brush options window, select the brush size as "pressure" (3) Set the pressure sensitivity variable size equal to the brush size such as "5", click "OK".
6. How to set up and use Parblo Tablet driver in macOS? macOS Mojave (10.14) system (1) After completing the driver installation, the system will automatically pop up the following prompt when the tablet or screen is recognized for the first time: (2) Please click the "Open System Preferences" button, and then open "Security and Privacy".
(3) On the "Accessibility" setting, click the "Press Lock" button, and then enter the administrator password system for authorization.
then click the "Open" button. (5) Please click the "press lock" button to lock.
(6) Turn off "Security and Privacy" and restart the system. When the system enters the desktop, open "ParbloTabletSetting" on the launchpad to use it. macOS Catalina (10.15) and higher (1) After completing the driver installation, first set the permissions of the same "macOS Mojave (10.14) system" as above, and then on the "input monitoring" setting, click the "press lock" button to enter the administrator password system for authorization.
(2) Please select "ParbloTabletDriver". (3) Please click the "press lock" button to lock.
(4) Turn off "Security and Privacy" and restart the system. When the system enters the desktop, open "ParbloTabletSetting" on the launchpad to use it. 7.What should I do if the pen on the tablet does not work? (1) Check whether the connection between the USB cable and the tablet port and computer port is loose. (2) Check whether the digital pen and tablet are within the effective sensing height or whether the LED indicator of the tablet is flickering when touching the tablet.
(2) Find "Pen and Touch" in "Control Panel" and open it. (3) Click "Long press, right-click", and then click "Settings" to open the long press setting window.
(4) Do not check "Use long press as right-click" and click "OK" twice.
9. What are the Android device APPs compatible with the product? Remarks: The Android version of the device must be 6.0 and above. The low battery of the device will affect the connection.
画吧 爱笔思 medibang Flipaclip procreate jamboard √ √ √ √ √ √ √ √ √ √ √ / 10. How to connect the Intangbo M tablet to an Android device? (1) Turn on the OTG switch on the Android phone (tablet) (some devices are turned on by default, please ignore). (2) Choose the OTG adapter that fits the interface of your mobile phone (tablet computer) and insert it into your mobile phone (tablet computer). (3) Then connect the USB head to the OTG adapter, and the Type-c port to the digital tablet.
a. Press and hold any two buttons on the tablet at the same time for more than 3 seconds and then release, the indicator light will flash 3 times quickly and then go out. At this time, the coordinate mode switch is completed. b. Long press any two buttons again for more than 3 seconds to switch back to the original mode. (6) After switching the mode according to your device, you can open the software and use it. 11.
3. Reinstall the driver. Note: Before installing the driver, please turn off all anti-virus software and uninstall all other pen tablet or pen display drivers from the computer and restart the computer.
