0 0 \0 Introduction Rr iN A Thank you for purchasing the Pergola. When properly assembled ond maintained, this pergola will provide many years of enjoyment! These instructions include helpful hints and important information needed fo safely assemble and properly main fain the pergola. Please read these instructions completely before you begin. Our patented pergola has been designed for easy assembly.
safety Advice The pergola must be positioned and fixed a flat level surface. Dispose of all plastic bags safely.Keep them out of the reach of chronic, creep Keep children and pest away from the assembly area unfit the work is completed. Always wear shoes, gloves and safely goggles when working. Take special care not to touch overhead power lines with the aluminum profiles. Do riot attempt fo assemble the pergola in windy or wet conditions. Do not position your pergola in an area ex posed fo excessive wind.
List of Parts The pergola is shipped in three cartons. These cartons are heavy.Be careful when lifting them. ‘Wear proper safety gear including work shoes, gloves and goggles. & The arise are Tamoxifen ed by removable stickers, Place all the parts for each step in staging areas,checking that you have all parts as you 2 3 if any parts are missing or damaged, contact customer service before beginning assembly: Customer Service: (877) 782 4482 Email: No. Profile Qly |Step| | No.
Ne. Profile City Step 26A 5 7.
STEP 1 Assembling the Corner Posts Place oll the parks on o level surface. Make sure the pieces are in the correct positions before assembling. Carefully follow the order of assembly to ensure an easy installation. Wear proper safety gear including work shoes, gloves and goggles. Components Rou conned or {10} Support plate (8) Support frame (9) Craw Corner profiteer) x 4 Place comer profiles{1] parallel to each other the ground.
rs Slide support frames (5) over lower end of corner profiles {1). Align prey-drillad screw hols in corner profiles (1) with screw holes in support poe {8). Attach support plates (8) to comer profiles (1) as shown, using two screws (23} for each plate.
STEP 2 Attaching the Beams to the Corner Posts Dm Screw {23} Beam conditioned Post Connector ~~ Magritte {ih {18 {16} x2 x4 x2 Insert beam conscious {11} info hollow ends of one long beam (4) and one short beam {5} as shown. Attach with four screws (23) on side. Attach magnet {16} to side of long beam {4] as shown, Attach with two screws (23).
10} as shown. Attach post connector {15} using two screws (22) through prevailed holes in long beam Attach post connector to post using four screws (23). you will tighten them in STEP 3. Repast step 2C to create two less.
STEP 3 Building the Basic Frame IMPORTANT You need af least 3 people to complete this step! Components oy = Short Beam with tong Beam with McKnight) rack {7} Beam connector (12) Canopy loops (26) Screw (23) Screw(25) Reid connector (34} x2 x2 x2 x14 x16 x2 x2 Insert t beam connectors {12} info long beams with track {6] as shown and fasten using two screws [23] such. Insert t beam connectors [33] info long beams with track {7/7A) as shown and fasten using one screw {25).
Using ot least 3 people, | frame less and slide beam connectors {12} on long beams with track {6} info short beams with track {7} as shown. Making sure to support the frame properly, fasten using screws {23). Important this stop you should place the pergola frame in its desired conniption. Make sure al comers are squared at 50 degrees.
STEP 4 Securing the Pergola to the Ground Fasten the pergola frame to the ground, using four spikes (21) for each support plate. Lower support frames {9} to cover support plates [8]. = Complainants Vz Ground spike (21) x16 Optional Securing the Pergola fo o Concrete Floor or Wood Deck Concrete Floor: 1.Using a concrete drill, drill holes into the concrete floor, corresponding fo the holes in support plates (8). OFT 00 2.
STEP 5 Installing the Roof Beams ATTENTION: DO NOT ATTEMPT TO ASSEMBLE THIS ALONE | Short Bo with track oS oar {13 oe loops (26A} Screw (23) Rail connector {24}; Long Beam with rack (64) x1 Long Beam (2) Short Beam {3] Boas connector (11) Roof connector (13) Craw (22) Screw(25) insert beam connector (12) into long beam with track {6A} as shown and fasten using two screws (23). Insert beam connector (34) into long beam with rack [7A] as shown and fasten using one screw {25}.
insert beam connector {11} nits beams (2) and {3} as shown and fasten using four screws (23). Ty rE y vid MILNE] {6A,7A) exactly as shown. and fasten with three screws {23} on each side.
STEP 6 Installing the Canopy Components Screw (24) x 14 Canopy fod {18) x7 Canopy (17) Canape Cover (20) Screw (254) Canopy Rod {19} Merlin Cover Conn actor (14) S<7ow (25) x2 x7 Insert canopy rods {18} into canopy rods {19] as shown and fasten with screws {25}. Create 7 sets. C The Spread out the canopy (17) on an even flat surface. Insert one canopy rod (18/19) into the first “sleeve” in the canopy until it shows in the center opening.
With the help of two people, poss the canopy rod {18/19) through the first canopy loop {26A] in beam with track [6A/7A] as shown, Continue sliding the rod through the canopy sleeve until it emerges of the other end. Fasten the canopy rod {18/19] ot each end to canopy loops [26] in beams with rack [6/7] using screws [24]. Repeat steps 4C/6D with oll seven canopy rods (18/19), Use the attached handles te open and close the canopy.
Li Measure and mark distance of 1.19" {36.5cm) from the edge on top of the roof beams {6/7} as shown. Slide metal cover connectors {14} info” sleeves”in canopy covers (20), Fasten canopy covers {20} to the roof beams {6/7} with using screws [25A) as shown.
12'x12’ Pergola Assembly Instructions WARRANTY: Warranty covers damage due to manufacturing defects only for a period of 3 years on the structure and 2 years on the roof/canopy from date of purchase. Warranty does not cover weather inflicted damage and/or damages causes caused by not following assembly instructions and adhering to warnings in manual. Warranty does not cover user error, negligence, or misuse. A WARNING: Cancer and Reproductive Harrow. P65Warnings.ca.gov.