User's Manual

ManualsBrandsParadox Security Systems ManualsElectronicsWireless Console

Table Of Contents

All-In-One Wireless Security System V2.0

Programming Guide

Model # MG-6130 / MG-6160

We hope this product performs to your complete satisfaction. Should you have any questions or comments, please visit

www.paradox.com and send us your comments.

Table of Contents

Things You Should Know..................................... 2

About This Programming Guide........................................... 2

Conventions......................................................................... 2

Installer Code (Default: 0000 / 000000)............................... 2

Maintenance Code (Default: 1111 / 111111)....................... 2

Master Code (Default: 1234 / 123456)................................. 2

Entering Programming Mode ............................... 2

Single Digit Data Entry Method............................................ 2

Feature Select Programming Method.................................. 3

Decimal and Hexadecimal Values ....................................... 3

Installer Quick Keys .............................................. 3

Zone Programming................................................ 4

Remote Control Button Programming................. 5

System Timers....................................................... 6

On-board Programmable Outputs (PGMs).......... 6

System Options ..................................................... 7

Communicator Settings ..................................... 10

Report Codes....................................................... 11

System Settings................................................... 13

Wireless Transmitter Assignment...................... 13

Wireless Output Assignment .............................. 14

Wireless Keypad Assignment............................. 14

Wireless Repeater Assignment........................... 14

Wireless Programmable Output (PGM) Settings14

Wireless Supervision Options ............................ 14

Wireless Repeater Options.................................. 16

Appendix 1: PGM Event Table ............................ 18

Appendix 2: Specifications ................................. 20

Appendix 3: Connection Diagrams..................... 21

Power Connections........................................................... 21

Telephone Line Connections ............................................ 22

PGM Connections............................................................. 23

Hardwire Zone Connections.............................................. 24

Connecting the Radio Antenna (MG-6160 only) ............... 24

Connecting to a UIP-256................................................... 25

X10 Transmitter Connections (MG-6160 only).................. 25

Connecting Magellan to WinLoad ..................................... 26

Connecting a Paradox Memory Key (PMC-4)................... 26

Tabletop Mounting ............................................................ 27

Mounting Magellan on the Wall......................................... 27

Appendix 4: Ademco Contact ID Report Codes 28

Appendix 5: Automatic Report Code List .......... 30

Summary of content (36 pages)

PAGE 1
All-In-One Wireless Security System V2.0 Programming Guide Model # MG-6130 / MG-6160 We hope this product performs to your complete satisfaction. Should you have any questions or comments, please visit www.paradox.com and send us your comments. Table of Contents Things You Should Know ..................................... 2 About This Programming Guide........................................... Conventions .........................................................................
PAGE 2
Things You Should Know About This Programming Guide This programming guide should be used in conjunction with the Magellan Reference & Installation Manual which can be downloaded from our website at paradox.com. Use this guide to record the settings programmed for this console. Conventions This symbol designates a warning or important information. This symbol designates a suggestion or reminder. This symbol designates a reference to another section, manual or guide.
PAGE 3
Feature Select Programming Method After entering certain sections, eight options will be displayed where each option from [1] to [8] represents a specific feature. Press the key corresponding to the desired option and the option number will appear in the LCD screen. This means the option is ON. Press the key again to remove the digit from the LCD screen (a * appears), thereby, turning OFF the option. Press the [*] key to set all eight options to OFF.
PAGE 4
Zone Programming Zone Definitions ( J[4] J[6] ) 000 = Zone Disabled (default) 008 = Delayed Fire Zone 001 = Entry Delay 1 009 = 24Hr. Burglary Zone 002 = Entry Delay 2 010 = 24Hr. Hold-up Zone 003 = Follow Zone 011 = 24Hr. Buzzer Zone 004 = Follow / Stay Zone 012 = 24Hr. Gas Zone 005 = Instant Zone 013 = 24Hr. Heat Zone 006 = Instant / Stay Zone 014 = 24Hr. Water Zone 007 = Instant Fire Zone 015 = 24Hr.
PAGE 5
Remote Control Button Programming Section RC# Data (Default: 4DE0) Section RC# Data (Default: 4DE0) + + + + [040] Default 1-16 ______ ______ ______ ______ [041] 1 ______ ______ ______ ______ [049] 9 ______ ______ ______ ______ [042] 2 ______ ______ ______ ______ [050] 10 ______ ______ ______ ______ [043] 3 ______ ______ ______ ______ [051] 11 ______ ______ ______ ______ [044] 4 ______ ______ ______ ______ [052] 12 ______ ______ ______ ______ [0
PAGE 6
System Timers Section Data (value from 000 to 255) Description Defaults [060] ____/____/____ seconds Entry delay 1 ( J[4] J[4] ) [061] ____/____/____ seconds Entry delay 2 ( J[4] J[4] ) [062] ____/____/____ seconds Exit delay ( [063] ____/____/____ minutes Bell cut-off time ( [064] ____/____/____ x 15 minutes No movement time Disabled [065] ____/____/____ seconds (minimum 10 seconds) Intellizone delay 045 secs.
PAGE 7
System Options [090] General Options Bold = Default setting Option [091] ON [1] Access code length 6 digits 4 digits [2] Audible trouble warning (except AC power failures) Disabled Enabled [3] Lock master code Disabled Enabled [4] Use user code 16 as duress code Disabled Enabled [5] Console tamper supervision Disabled Enabled [6] Need code to bypass zones Disabled Enabled [7] PGM1 normal state N.O. N.C. [8] PGM2 normal state N.O. N.C.
PAGE 8
[094] Zone Options Bold = Default setting Option OFF ON [1] Stay delay zones Disabled Enabled [2] Report zone restore On Bell cut-off On zone closure [3] & [4] Tamper recognition options † See table See table See table See table [3] OFF OFF ON [4] OFF ON OFF ON ON - Disabled - Trouble only - Disarmed: Trouble only - Armed: Follow zone’s alarm type (page 4) - Disarmed: Audible alarm - Armed: Follow zone’s alarm type (page 4) [5] Generate tamper trouble if detected on b
PAGE 9
[098] Dialer Options Bold = Default setting Option [1] & [2] Telephone line monitoring options * [1] [2] OFF OFF - TLM disabled OFF ON - Generate a trouble ON OFF - Generate audible alarm if armed ON ON - Silent alarms become audible OFF ON See table See table See table See table [3] Switch to pulse on 5th attempt Disabled Enabled [4] Call back Disabled Enabled [5] Alternate dialing Disabled Enabled [6] Force dial Disabled Enabled [7] DTMF diali
PAGE 10
Communicator Settings Section Data Description [105] ____/____/____ Report format for monitoring station telephone number 1 ( J[4] J[3] ) [106] ____/____/____ Report format for monitoring station telephone number 2 ( J[4] J[3] ) 001 = Ademco slow (1400Hz 10BPS) 004 = Ademco Contact ID (default) 002 = Silent Knight (1400Hz 20BPS) 005 = SIA FSK [107] ____/____/____/____ Account number ( [108] ____/____/____/____ Panel identifier (for use with WinLoad software) ( [109] ____/____/____/____ P
PAGE 11
Report Codes Arming Report Codes Special Arming Report Codes Disarming Report Codes Default = FF Special Disarming Report Codes Section Data Section Data Section Data Section Data [120] [121] [122] [123] ____/____ User Code 1 [124] ____/____ Auto-arming [126] ____/____ User Code 1 ____/____ User Code 2 ____/____ Disarm via PC ____/____ User Code 3 ____/____ No movement ____/____ User Code 3 ____/____ Future use ____/____ User Code 4 ____/____ Partial arming ____/____ User Code 4 ___
PAGE 12
Default = FF Special Alarm Report Codes Tamper Report Codes Tamper Report Codes Tamper Restore Report Codes Section Data Section Data Section Data Section Data [147] [148] ____/____ Emer.
PAGE 13
Wireless Module Trouble Report Codes [173] [174] ____/____ PGM Supervision Loss Default = FF Wireless Module Trouble Restore Report Codes [175] ____/____ PGM Supervision Restored ____/____ PGM Tamper ____/____ PGM Tamper Restored ____/____ Keypad Supervision Loss ____/____ Keypad Supervision Restored ____/____ Keypad Battery Trouble ____/____ Keypad Battery Trouble Restored ____/____ Keypad AC Failure [176] ____/____ Keypad AC Restored ____/____ Repeater Supervision Lost ____/____ Repeater Su
PAGE 14
Wireless Output Assignment Wireless output assignment may be done through the console’s menu ( number in the corresponding section: Section Serial Number Section J[4] J[7] ).
PAGE 15
[291] Wireless Transmitter Supervision Zone Options * Option [292] ON [1] Zone 9 supervision Disabled Enabled [2] Zone 10 supervision Disabled Enabled [3] Zone 11 supervision Disabled Enabled [4] Zone 12 supervision Disabled Enabled [5] Zone 13 supervision Disabled Enabled [6] Zone 14 supervision Disabled Enabled [7] Zone 15 supervision Disabled Enabled [8] Zone 16 supervision Disabled Enabled OFF ON Wireless Transmitter Supervision Zone
PAGE 16
[297] Wireless PGM Console Supervision Options (Follow Alarm/Follow Bell) Option Bold = Default setting OFF ON [1] PGM1 console supervision Disabled Enabled [2] PGM2 console supervision Disabled Enabled [3] PGM3 console supervision Disabled Enabled [4] PGM4 console supervision Disabled Enabled [5] to [8] Future Use Wireless Repeater Options Wireless Repeater Options Bold = Default setting Option MG-RPT1 #1 [300] OFF [1] Repeat Wireless Zone 1 Signals [2] Repea
PAGE 17
Wireless Repeater Options Bold = Default setting Option MG-RPT1 #1 [303] OFF [1] Repeat Wireless Zone 25 Signals [2] Repeat Wireless Zone 26 Signals [3] Repeat Wireless Zone 27 Signals [4] Repeat Wireless Zone 28 Signals [5] Repeat Wireless Zone 29 Signals [6] Repeat Wireless Zone 30 Signals [7] Repeat Wireless Zone 31 Signals [8] Repeat Wireless Zone 32 Signals Wireless Repeater Options Bold = Default setting Option [1] Repeat Wireless 2-Way PGM 1 Signals
PAGE 18
Appendix 1: PGM Event Table Event Group # 00 = Zone closed 01 = Zone opened Sub-group # 01 to 32 = Zone number 99 = Any zone number 02 = System status 00 = N/A 01 = N/A 02 = Silent alarm 03 = Buzzer alarm 04 = Steady alarm 05 = Pulsed alarm 06 = Strobe 07 = Siren stopped 08 = Squawk ON* 09 = Squawk OFF* 10 = Ground start 11 = System disarmed 12 = System armed 13 = Entry delay engaged 99 = Any system status event 03 = Bell status 00 = Bell OFF 01 = Bell ON 02 = Bell Squawk Arm 03 = Bell Squawk Disarm 0
PAGE 19
Event Group # Sub-group # 12 = Delay zone alarm transmission 01 to 32 = Zone number 99 = Any zone number 13 = Arming with user 01 to 32 = User number 99 = Any user number 14 = Special arming 00 = Auto-arming 01 = Late to close 02 = No movement arming 03 = Partial arming 04 = Quick arming 05 = Arming through WinLoad 99 = Any special arming event 15 = Disarming with user 16 = Disarm after alarm with user * 01 to 16 = User number 99 = Any user number 17 = Alarm cancelled with user ** 18 = Special dis
PAGE 20
Event Group # Sub-group # 34 = Special 00 = System power up 01 = Reporting test 02 = WinLoad logon 03 = WinLoad logoff 04 = Installer in programming mode 05 = Installer exited programming mode 06 = Closing delinquency delay elapsed 99 = Any special event 35 = Non-medical alarm 01 to 16 = User number 99 = Any user number 36 = Zone triggered a utility report 37 = Signal strength weak 1 01 to 32 = Zone number 99 = Any zone number 38 = Signal strength weak 2 39 = Signal strength weak 3 40 = Signal streng
PAGE 21
Appendix 3: Connection Diagrams Power Connections Figure 2: Connecting the AC Transformer Back view of the Magellan console. 12Vac to 16Vac 1A Do not use any switchcontrolled outlets. Insert the transformer’s wires into the AC terminals. Figure 3: Connecting the DC Power Supply Back view of the Magellan console. Insert the transformer’s wires into the AC and COMMON terminals. 12Vdc to 18Vdc 1A DC Power Supply + Figure 4: Connecting the Battery Back view of the Magellan console. 1.
PAGE 22
Figure 5: Auxiliary Output 13.8Vdc, 200mA Auxiliary Output Back view of the Magellan console. - + Telephone Line Connections Figure 6: Telephone Line Direct Connect Telephone Line Connection Note The Magellan console must be able to seize the telephone line and place a call in an emergency situation. It must be able to do this even if other equipment (telephones, answering machines, computer modems, etc.) already has the line in use.
PAGE 23
PGM Connections Figure 8: PGM1 Connections Back view of the Magellan console. Method 2 (exceeds 100mA) Method 1 (less than 100mA) Devices such as a light, etc. External DC Power Supply Devices such as a light, etc. External relay External DC Power Supply Figure 9: PGM2 Connections Back view of the Magellan console. Method 1 (less than 50mA) Devices such as a light, etc. Method 2 (exceeds 50mA) External DC Power Supply Method 3 (less than 50mA) External relay Devices such as a light, etc.
PAGE 24
Hardwire Zone Connections Figure 10: Hardwire Zone Connections Connecting the Radio Antenna (MG-6160 only) Figure 11: Connecting the Radio Antenna Back view of the Magellan console. If the radio reception is not very good, connect the supplied radio antenna to the ANT terminal of the Magellan console. Move the antenna around until the spot with the best reception is found.
PAGE 25
Connecting to a UIP-256 Figure 12: Connecting to a UIP-256 Universal In-Field Programmer Connect the 10pin cable of the UIP-256 to the 10pin connector of the Magellan console Back view of the Magellan console. Standard DB-9 cable (9-pin serial cable) UIP-256 Universal In-Field Programmer Download latest firmware version of Magellan from the Paradox website at paradox.com X10 Transmitter Connections (MG-6160 only) Figure 13: Connecting the X10 Transmitter Back view of the Magellan console. 1.
PAGE 26
Connecting Magellan to WinLoad Figure 14: Connecting Magellan to WinLoad 4- to 10-pin cable (supplied with the 306 Adapter) 306 Adapter Computer containing WinLoad software Standard DB-9 cable (9-pin serial cable) Back view of the Magellan console. 4-pin connector cable Connecting a Paradox Memory Key (PMC-4) Figure 15: Connecting a Paradox Memory Key (PMC-4) PMC-4 Back view of the Magellan console.
PAGE 27
Tabletop Mounting Figure 16: Tabletop Mounting To mount the Magellan console on a tabletop the wall plate has to be inserted beforehand: 1. Slide the wall plate’s tabs labeled B into the Magellan console’s open slots labeled D (see Figure 17 on page 27). 2. Insert two screws (included) through the wall plate’s screw holes labeled C into holes labeled E in the Magellan console (see Figure 17 on page 27). 3.
PAGE 28
Appendix 4: Ademco Contact ID Report Codes CID# Reporting Code Programming Value Medical Alarms - 100 CID# Reporting Code Programming Value CID# Notification appliance chk.
PAGE 29
CID# Reporting Code Programming Value CID# Reporting Code Programming Value CID# Reporting Code Programming Value 387 Intrusion detector Hi sensitivity 75 451 Early open/close 9A 603 Periodic RF transmission BF 388 Intrusion detector Low sensitivity 76 452 Late open/close 9B 604 Fire test C0 389 Sensor self-test failure 77 453 Failed to open 9C 605 Status report to follow C1 391 Sensor watch trouble 78 454 Failed to close 9D 606 Listen-in to follow C2 392 Drift c
PAGE 30
Appendix 5: Automatic Report Code List System Event Default Contact ID Report Code when using sections [790] to [795] Default SIA Report Code when using sections [790] to [795] Arming with Master Code (##) 3 4A1 - Close by user CL - Closing Report Arming with User Code (##) 3 4A1 - Close by user CL - Closing Report Arming with Keyswitch (##) 3 4A9 - Keyswitch Close CS - Closing Keyswitch Auto Arming 3 4A3 - Automatic Close CA - Automatic Closing Arm with PC software 3 4A7 - Remote arm/disarm
PAGE 31
System Event Default Contact ID Report Code when using sections [790] to [795] Default SIA Report Code when using sections [790] to [795] AC Failure 1 3A1 - AC loss AT - AC Trouble Battery Failure 1 3A9 - Battery test failure YT - System Battery Trouble Auxiliary supply trouble 1 3AA - System trouble YP - Power Supply Trouble Bell output current limit 1 321 - Bell 1 YA - Bell Fault Bell absent 1 321 - Bell 1 YA - Bell Fault Clock lost 1 626 - Time/Date inaccurate JT - Time Changed Fire
PAGE 32
Warranty Paradox Security Systems Ltd. (“Seller”) warrants its products to be free from defects in materials and workmanship under normal use for a period of one year. Except as specifically stated herein, all express or implied warranties whatsoever, statutory or otherwise, including without limitation, any implied warranty of merchantability and fitness for a particular purpose, are expressly excluded.
PAGE 33
NOTES
PAGE 34
PAGE 35
PAGE 36
Installer Menu Overview ready to arm menu Must enter the installer, maintenance or user code to access 1-bypass zones 2-alarm clock 3-time and date 4-system 1-language setup 2-user profile† 3-communicator central report? voice report? utility report? pager report? add service tel? (MG-6160 only) add tel. # 1 add tel.#1 add tel. # 1 add tel. # 1 tel.