All-In-One Wireless Console (MG-6130 / MG-6160) MG-6130 MG-6160 User Guide We hope this product performs to your complete satisfaction. Should you have any questions or comments, please visit www.paradox.com and send us your comments.
Table of Contents Overview.................................................... 2 Trouble Display.................................................. 23 Introduction ......................................................... 3 Basic Operation .................................................. 6 Making a Service Call (MG-6160 only) .............. 24 Arming / Disarming .................................. 9 Demo Mode ....................................................... 24 X10 Automation (MG-6160 only) .....
Chapter 1: Overview What’s in this chapter: • • Introduction Basic Operation This chapter will give you a basic overview of your Magellan system. It will cover Magellan’s light indicators, keypads and remote controls. This chapter also includes sections explaining how to use this guide as well as a list of conventions used throughout the manual.
Introduction Magellan is the first security system to combine security with popular consumer features and a stylish design. Magellan looks different from anything else in the security industry. Install it anywhere in your home or small business–Magellan blends beautifully with any décor. Listen to the radio, leave a message or use your system as a telephone, alarm clock or monitoring device.
How to Use this Guide This manual employs an icon-based instruction format to display the steps required to use Magellan’s features. The icon-based instructions are designed to be used in conjunction with the on-screen instructions being displayed on the Magellan console. In other words, as you are following the instructions shown in this guide, you should also be reading what is being displayed on the LCD screen. All of the icons displayed in this guide are explained in Conventions on page 5.
Conventions Icon [DATA] or [KEY] Overview Definition Icon Definition Reference to another manual or guide. Enter the System Master code on the main keypad. Warning or important information. Enter your User code on the main keypad. Reminder or suggestion. Enter a time value (such as when programming Magellan’s date and time) on the main keypad. Type required data or press the designated key on either the main or center keypad. Enter numerical data for the specified feature on the main keypad.
Basic Operation Figure 1: Basic Overview Light Indicators: Orange INFORMATION light ON: There is a trouble in the system, an alarm has just occurred or a zone has been bypassed. Flashing: There is a power failure and the Magellan console is receiving no power. Center Keypad (see page 8) LCD Screen (see page 7) Volume Keys Main Keypad (see page 8) Red ARMED light ON: System is Regular armed. Slow Flashing: System is Stay armed. Rapid Flashing: System is in alarm. Green READY light ON: All zones closed.
LCD Screen Alarm clock feature enabled (see page 20). Information symbol. This means: • There is a trouble in the system (see page 23). • There is an alarm in memory (see page 13). • Zones or a zone is currently bypassed (see page 10). Instructions and/or messages appear in this line The function or action associated with the action key directly underneath the text appear in this line. Press the appropriate action key to access the function.
Magellan’s Keypads Main Keypad Center Keypad Use keys [1] to [16] on the center keypad for the following: Zones 1 to 32 OFF = Zone closed (ok) ON = Zone opened Flashing = The zone has been tampered Fast Flashing = Zone is in alarm Press once = Listen to zone’s label (e.g.
Chapter 2: Arming / Disarming This chapter will cover the multiple arming methods that Magellan employs such as Regular arming and Stay arming. This chapter will also cover disarming the system, what to do during a fire alarm, fire safety tips and panic alarms. Arming When your system is armed, it can respond to any breach in the protected zones by generating an alarm and by transmitting a report to your monitoring station.
Stay Arming Stay arming will partially arm your system to permit you to remain in your home by arming the outer zones of your system (e.g. doors and windows) and ignoring interior zones (e.g. motion detectors). All defined zones in the system must be closed (the green READY light is ON) to Stay arm the system. To Stay arm your system: User code Instant Arming This arming method is the same as Stay arming (page 10) except that the Entry Delay Timer (see page 12) is ignored.
One-Touch Arming If enabled by your installer, you can arm your system with the following arming methods simply by pressing and holding (for three seconds) the appropriate function key. You do not have to enter your User code. See Figure 1 on page 6 for the location of the function keys. Table 1 shows what function keys can be used for one-touch arming.
Disarming When your system is disarmed, it deactivates any alarms in progress and it deactivates the zones so an alarm will not be triggered if zones are breached. Entry Delay Timer Your installer will program designated entry points (i.e., the front door) with an Entry Delay timer. This delay gives you time to enter the armed premises and enter your User code to disarm your system before the alarm is triggered. Up to two Entry Delay Timers can be programmed in your Magellan console.
Disarming a System in Alarm To disarm a system in alarm: In the case of a burglar alarm, leave the premises immediately and call the police from a safe location (i.e., neighbor’s). User code Alarm Memory Display When an alarm has occurred in your system, the Magellan console will store that alarm in its alarm memory. All zones where alarms have occurred will be stored in the alarm memory. The system will erase the contents of the alarm memory every time the system is armed.
Figure 2: Single Residence with One or Two Sleeping Areas Single Residence with One Sleeping Area Dining Room Kitchen Bedroom Single Residence with Two Sleeping Areas Bedroom Kitchen Kitchen Bedroom Bedroom Bedroom Bedroom Family Room Family Room Living Room Living Room Living Room Sleeping area Bedroom Bedroom Bedroom Bedroom Bedroom Sleeping areas = Smoke detectors for minimum security. = Smoke detectors for additional security.
Delayed Fire Zones If the zone is a Delayed Fire Zone, there is an automatic delay before your system contacts your monitoring station. Refer to Figure 3 on page 16 to prevent unnecessary reporting of false alarms. To clear a fire alarm triggered by accident: Press any key within 30 seconds of alarm Clear problem from area (i.e. smoke around the smoke detector). If the problem remains after 90 seconds, the alarm will sound again.
Minimizing Home Fire Hazards Figure 3: Delayed Fire Zone How can you avoid the three most common causes of fires at home? • • • Never leave cooking food unattended. It is the leading cause of fire injuries. Cooking fires often result from unattended cooking and human error, rather than mechanical failure. Stay alert when smoking. Careless smoking is the leading cause of fire deaths. Smoke detectors and smoulder-resistant bedding and upholstered furniture are significant fire deterrents.
Figure 4: Panic Alarm Keys Panic 1 (Non-medical Emergency Panic) Panic 2 (Auxiliary Panic) Panic 3 (Fire Panic) Arming / Disarming 17
Chapter 3: Consumer Features This chapter will cover the other features that make Magellan a unique and wireless security system. Message Center The Magellan console comes with a message center that allows you to record a voice message that can be played at a later time. This message center is useful when you need to leave a message for another member of your family or even for yourself. Recording a Message Perform the following to record a message: After recording a message, the Press & hold for 3 secs.
FM Radio Feature (MG-6160 only) The Magellan console incorporates a built-in radio. You can use this radio to listen to your favourite radio stations. You can also save up to 15 radio stations in memory. Using the Radio You can use the main keypad to enter the 4-digit frequency of the desired radio station or the [UP] action key to advance to the next available radio station. If no action is performed after a few seconds, the console will revert to its standby screen.
Accessing the Radio by Remote Control By default, your remote control is programmed to manage Magellan’s radio in the following ways: • • • The / button on your remote control turns the radio ON/OFF. Press the button once to turn the radio ON and then press the button again to turn the radio OFF. The / button on your remote control scrolls through the radio stations saved in memory. Every time you press the button, Magellan will scroll to the next radio station saved in memory.
• • • • When the alarm clock activates, press the [snooze] action key or press any button on the Magellan console to enable the snooze feature. The alarm clock will wait ten minutes before activating again. Press and hold the key or press the [off] action key to disable the alarm clock. To enable the alarm clock again, press and hold the key. The alarm clock symbol will appear on the LCD screen. Press the [stop] action key to turn OFF but not disable the alarm clock.
Setting the Ring Tone and Volume menu ok next ok ok - + ok or Program ring tone Press until desired tone Program ring volume Use the – or + action keys to increase or decrease the volume menu Chime Zones You can program the console to emit a tone whenever designated zones are opened. These zones are referred to as Chime zones.
Time and Date To set the time and date of your Magellan console: 12hrs menu 24hrs or Select the console’s time format ok ok Enter the time Enter the date Programmable Outputs (PGMs) The Magellan console includes four programmable outputs (PGMs). When a specific event or condition occurs in the system, the PGM can be used to activate light switches, open/close a garage door and much more. Talk to your installer about this useful feature.
Making a Service Call (MG-6160 only) When certain troubles occur, you can call for service using the Magellan console. The Trouble Display has a feature that can be used to contact your installer. The telephone number will already be programmed in your Magellan console by your installer. To make a service call: next ok Press to scroll through troubles Press until Service Required screen call Demo Mode Use this mode to preview the Magellan console’s features.
Chapter 4: Access System Features by Phone This chapter covers Magellan’s remote access feature that transforms any external touch-tone telephone into a keypad. Through the telephone, you will be able to arm/disarm your system, listen to any messages, activate outputs and more. Access System Features by Phone Due to Magellan’s voice-assisted remote features, any touch-tone telephone can be turned into a keypad.
Step 3: Select an action Arm/Disarm: Pressing the [1] key toggles the system between armed and disarmed states. If your system is disarmed, press the [1] key to arm your Magellan console. If your system is armed, press the [1] key to disarm your system. Speakerphone Mode: Press the [4] key to convert your Magellan console into a remote speakerphone. You can listen in at your home and/or speak to someone already there.
Chapter 5: Advanced Features This chapter pertains to features and functions that only the System Master user can access. This chapter covers User code programming, such as programming new users into the system. This chapter also covers some zone features as well as instructions on how to customize Magellan to suit your needs. Programming User Codes User codes allow access to the system.
It is recommended that you change the default System Master code to a code of your choosing. This will prevent unauthorized users from accessing and modifying options. Duress User Code If enabled by your installer, User code 016 can be programmed as a Duress code. If you are forced to arm or disarm your system, entering the user code for User 016 will arm or disarm your system and immediately transmit a silent alarm (Duress code) to your monitoring station.
Deleting a Remote Control To delete a remote control that is already programmed in the Magellan system: menu next ok next ok yes Modify label? System Master code Delete remote? No Another user Press until desired user menu Setting the Language no/yes Yes next By default, Magellan is set to English.
Utility Reporting Customize which events and when these events will be reported to you by using the Utility Reporting menu. Program from one of four report types to have the Magellan console call you when certain conditions are met. With this feature programmed, Magellan will call up to two separate telephone numbers and play a personalized pre-recorded voice message. After receiving the message, press the [#] key on the telephone twice to acknowledge and end the message.
• Non-medical Emergency alarm: Use this report type to have the Magellan console call you when specific users require nonmedical emergency assistance. When the programmed users press the appropriate key on their remote controls (see Remote Controls on page 7), the Magellan console will make a buzzing sound and then call one or both programmed telephone numbers. After entering the menu, select the desired user(s) that you wish reported.
Bell Cut-Off Timer After an audible alarm, Magellan’s built-in siren will stop upon the disarming of the system or when the Bell Cut-off Timer has elapsed, whichever comes first. To program the Bell Cut-off Timer: menu next next next ok ok Enter delay time in minutes Master code For UL installations, the Bell Cut-off Timer must be set to 4 min. minimum. For cUL, the Bell Cut-off Timer must be set to 5 min. minimum.
Index A B E Accessing system features by phone ....25 Accessing the radio by remote ................20 Action key .....................................................6 Adding a remote control ...........................28 Alarm clock Backlight ......................................................22 Basic Operation ...........................................6 Bypassing zones .......................................10 Entry delay timer ....................................... 12 Exit delay timer ........
Symbol ....................................................7 Instant arming ............................................10 K Keypad settings .........................................22 Keys Action keys .............................................6 Alarm clock/Radio Tuner key ..................6 Function keys ..........................................6 Message key ...........................................6 Regular arm key .....................................6 Stay arming key ...........................
Saving radio stations ................................19 Service Call ................................................24 Setting the Language ................................29 Settings, keypad ........................................22 Speakerphone Utility Reporting .........................................30 Configuring ...........................................22 Using .....................................................21 Standard Fire Zone ...................................14 Stations, radio .....
Limited Warranty Paradox Security Systems Ltd. (“Seller”) warrants its products to be free from manufacturing defects in materials and workmanship for one-year following the date of manufacture. Seller will, within this period, at its option, repair or replace any product failing to operate correctly without charge to the original purchaser or user.
paradox.