System Requirement Compatible with IBM, PC, Dos. Windaws95/98/2000/ NT/XP. Software is needed under Windows INSTALLATION 1} Remove the software for other keyboard and mouse ta avid clash. 2) Shut down and turn off the computer. 3) Plug the round PS/2 connector into the computer” $ round PS/2 port. 4) Please distinguish the mouse and keyboard connectors correctly (Refer to picture 1-1). 5) Turn on the computer (Picture 1-1) This device complies with Part] 5 of the FCC Rules.
Battery Installing For Mouse 1) Push down the indented area on the top cover of mouse and slide it backwards. (Refer to picture 1-2) 2) Insert two "AAA" batteries correctly into the mouse battery to picture 1-3). For keyboard 1) Upturn the underside of the keyboard and take off the batteries’ cover (Refer to picture 1-4) 2) Insert two "AA" batteries correctly into the keyboard battery compartment (Refer to picture 1-4). Products will not operate if polarity is reversed.
Channel Setting 1)Turn on the computer. 2)There is a small hots marked "connect" on both amuse & keyboard. Press them with a pencil point or other pointed object and release after the Windows Operation System is fully running, {refer ta picture 1-5) lambently press the key “connect” on the top of receiver, they will register the wireless keyboard & mouse with the receiver. (Refer to picture 1-6). Test the connection by pressing the keys of keyboard and rotating the scroll of mouse.
Mouse Troubleshooting Here are some handy tips if you have trouble installing ar operating the mouse 1) Computer can't get the mouse registered on the receiver. Check the connection and ensure that the mouse port of the receiver is correctly plugged into the computer. Ensure that the PS/2 port setting is correct (Refer to the PC instruction). 2) Mouse can not work after installing completely. <1>Check the mouse and ensure the batteries correctly into the battery compartment.
backache and ensure that you already correctly remove the existing mouse software in your computer. Maintenance Of the Mouse 1. Open the ball cover anti clockwise and remove the ball. 2. Clean the bail with a dry, clean cloth. 3. Clean the roller using a cotton swab dipped with clean water. 4. Reinstall the ball and cover carefully. Keyboard Troubleshooting Here are some handy tips if you have trouble installing or operating the keyboard. 1. Computer can not search the keyboard.
3.When your keyboard is slowness or even quit working. <1>Check the batteries’ indicator light. It will flash if the batteries are in the low power situation. In this case, please change the new batteries. <2>It will be form a barrier prohibiting smooth operation that the receiver is around high-radiance area. Check and make it far from that. <3>Check and ensure that you already correctly remove the existing keyboard software in your computer before using the wireless keyboard.
I» >> << piranha Stop Play/Pause Next track Pr-track Mute Volume down Volume up Multimedia My computer DEBS RGR Forward Back Stop Search Refresh Www E-mail My favorite Calculator
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against ham ful interference in a residential installation.