Specifications

Wireless electricity
sensor familyoverview
Minimum operating current 0.03 – 0.05 A (at input from external CT)
Transmission interval
Our electricity sensor series is comprised of non-invasive, self-powered, miniature
wireless current sensors. The sensors clamp onto the electrical outgoing wire from
thecircuitbreakerandare self-poweredbythe circuit’smagneticfield.Hundreds
of sensors canbe installed ina few hourswith nodisturbance to daily operations.
Once installed, the sensors become part of the building infrastructure, never
requiring maintenance, service or batteryreplacement.
PAN-14P wireless high current sensor specifications
Current input range
0 – 5 A (up to 10 A peak)
(fromexternal currenttransformer)
The PAN-14P high-current
sensor attaches to any size
standard
0 – 5 Acurrent transformer,
allowing measurements at
any current range or wire gauge.
Current measurement accuracy Typically <2% at I > 0.1 A (at input from external CT)
AC frequency supported
Transmission frequency
Transmission power (ERP)
60 Hz
915 MHz
0 dBm (max)
10 seconds
33.8 × 29 × 42.5 mm
1.33 × 1.14 × 1.67 inch
Physical dimensions
Current measurement range Determined by external current transformer