Technical Specs

centricabusinesssolutions.com
Current measurement accuracy
Wireless electricity
Technical specifications
Our electricity sensor series is comprised of non-invasive, self-powered, miniature
wireless current sensors. The sensors clamp onto the electrical outgoing wire from
thecircuitbreakerandare self-poweredbythe circuit’smagneticfield.Hundreds
of sensors can be installed ina few hourswith no disturbance to daily operations.
Once installed, the sensors become part of the building infrastructure, never
requiring maintenance, service or batteryreplacement.
PAN-12P wireless current sensors specifications
Physical dimensions
Current measurement range 0 – 225 A
Minimum operating current 0.7 – 1.2 A (typical)
Transmission frequency
Key features
• Non-invasive – snaps and
fits without disconnection
• No maintenance; self-powered
• High accuracy
• Wireless – no wiring,
Transmission interval
unlike standard CT-based
monitoring systems
• Real-time current data
transmitted every 10seconds
Max hot-wire outer
diameter (including insulation)
PAN-10P
sensor
AC frequencysupported
60 Hz
915 MHz
10 seconds
PAN-12P
18.8 mm
0.74 inch
Typically <2% at I > 10 A
46.2 x 22.8 x 32.6 mm
1.82 x 0.90 x 1.28 inch