Technical Specs
Table Of Contents
centricabusinesssolutions.com
Current measurement accuracy
Wireless electricity
Technical specifications
Our electricity sensor series is comprised of non-invasive, self-powered, miniature
wireless current sensors. The sensors clamp onto the electrical outgoing wire from
the circuit breaker and are self-powered by the circuit’s magnetic field
Hundreds of sensors can be installed in a few hours with no disturbance to daily
operations. Once installed, the sensors become part of the building
infrastructure, never requiring maintenance, service or battery replacement.
PAN-10P wireless current sensors specifications
Physical dimensions
Current measurement range 0 – 63 A
Minimum operating current 0.5 – 1 A (typical)
Transmission frequency
Key features
•
Non-invasive – snaps and
fits without disconnection
•
No maintenance; self-powered
•
High accuracy
•
Wireless – no wiring,
Transmission interval
unlike standard CT-based
monitoring systems
•
Real-time current data
transmitted every 10seconds
Max hot-wire outer
diameter (including insulation)
PAN-10P sensor
60 Hz
AC frequency supported
915 MHz
10 seconds
7mm
0.28 inch
Typically <2% at I > 3 A
17 x 20 x 32 mm
0.67 x 0.79 x 1.26 inch