Network Camera User Manual Network Camera User Manual 2021-Version01 Statement Thank you very much for purchasing our products. If you have any questions or needs during the use, please feel free to contact us. This manual is written according to the current software and hardware. Due to the update, modification and upgrade of the software version, and the upgrade of the hardware device, the technical problems described in the manual may be inaccurate or imperfect. Please understand.
Network Camera User Manual Table of Contents Chapter1 System Requirement................................................................ 3 Chapter 2 Network Connection............................................................... 4 2.1 Setting the Network Camera over the LAN..................................................4 2.2 Wiring over the LAN.......................................................................................4 Chapter 3 Access to the Network Camera................................
Network Camera User Manual Chapter1 System Requirement Operating System Microsoft Windows XP SP1/7/8/10 CPU 3.0 GHz or higher RAM 4G or higher Display 1024×768 resolution or higher Web Browser For camera that supports plug-in free live view Internet Explorer 8 – 11, Mozilla Firefox 30.0 and above version and Google Chrome 41.0 and above version. Note: For Google Chrome 45 and its above version or Mozilla Firefox 52 and its above version which are plug-in free, Picture and Playback functions are hidden.
Network Camera User Manual Chapter 2 Network Connection 2.1 Setting the Network Camera over the LAN Purpose: To view and configure the camera via a LAN, you need to connect the network camera in the same subnet with your computer, and install the AjDevTools or SADP software to search and change the IP of the network camera. AjDevTools:Download SADP:Download 2.
Network Camera User Manual ② Set network camera over the LAN via a switch or a router. (If it is a POE switch, you do not need to power the camera).
Network Camera User Manual Chapter 3 Access to the Network Camera 3.1 Accessing by Web Browsers Steps: 1.Computer download and install the AjDevTools or SADP software tool. 2.After installation,open the software and click the Start Search. 1 Search for the IP address of the camera; 2 Query the IP address of the Camera; 3.
Network Camera User Manual ② ③ 4.
Network Camera User Manual ③ Modify the IP address of the camera to be in the same network segment as the IP address of the computer or choose DHCP to obtain an IP address automatically; ④ Select OK--Successfully modified; 5.
Network Camera User Manual 3.2 Web login 1. Open the web browser or click Go to web; 2. In the browser address bar, input the IP address of the network camera, and press the Enter key to enter the login interface; 3. Input the user name and password and click Login. Note: The default IP address is 192.168.1.110. Username:admin Password:123456 First login Click “install Web Plug-in” when prompted. You have to download and run the executable as administrator.
Network Camera User Manual Chapter 4 Camera General Configurations 4.1 Modify the camera “Title name” Steps: Configuration > Camera > Image > OSD > Title Message. 4.2 Privacy Mask function settings Steps: Configuration > Camera > Image >Privacy Mask > Left mouse button > Select the privacy section > Save. ( Can choose four Privacy Mask parts.
Network Camera User Manual 4.3 Video parameter settings Steps: Configuration > Camera > Video >Encode >Main Stream > Sub Stream >Advance Encode > Save. (Can Modify Encode Mode -Resolution-FPS-Video Quality-Bit Rate.) 4.4 Audio settings Steps: Configuration > Camera > Audio>Encode >Volume > Save.
Network Camera User Manual 4.5 TCP/IP settings Steps: Configuration > Network >TCP/IP> Save. (Can manually modify and automatically obtain the IP address.) 4.6 P2P function settings Steps:Configuration > Network > P2P >Enable>Save.
Network Camera User Manual 4.7 Network Connect Check Using the P2P ID and QR code, you can access the camera remotely anywhere via smart phone with Internet access. Please register an account via mobile phone after installing the Danale APP from APP Store or Google Play Market, then log in and add your camera to start previewing. Or you can go to the website http://www.danale.com/ to register if you need PC remote access. You can download APP from the website to find out more.
Network Camera User Manual 4.8 Enable Motion Detection Alarm Steps:Configuration > Event > Video Detection > Enable > Setup Schedule > Setup Detection Area. The motion detection area can be set according to the scene--Sensitivity--Threshold --Block Count--Night Time(Enable)--Night Sensitivity--Night Threshold.
Network Camera User Manual 4.9 Modify the camera “Time & Date” Steps: Configuration > System > Time setup. There are two time update modes available:Manual and NTP. Select your Time Zone, and click PC Sync,click Save, You can also set up the DST (Daylight Savings Time) if necessary. (Time and date will reset to 2018-01-01 if camera was restarted) If the camera is connected to the Internet, you can set up a NTP server for the camera to sync the time and date automatically. 4.
Network Camera User Manual 4.11 Version firmware upgrade Steps: Configuration > System > Upgrade > Select Firmware. Normal state, it is not recommended to upgrade the firmware, please confirm the version with the technician before upgrading. Chapter 5 Frequently Asked Questions Why can’t I open the default IP address 192.168.1.110 via web browser ? The default IP address may not match your LAN’s IP scheme. Check your computer’s IP address before accessing the camera.
Network Camera User Manual How to upgrade the IP camera ? ①Ask the supplier for the suitable firmware. ②You can use the web browser, search tool, or PC client to upgrade the camera. ③Go to the Configuration > System > update, click browse and select the firmware, then click Upgrade button and wait for the operation to complete.
Network Camera User Manual How to make the NVR record in motion detection mode ? ①Enable the IP camera motion detection function via web browser. ②add the IP camera via ONVIF protocol. ③change the NVR record mode to Motion Detection mode. ④check the NVR screen motion detection icon and try playback (Please refer to your NVR’s manual for NVR’s motion record option.