Vertical Babel Saw OWNER’S MANUAL and OPERATING INSTRUCTIONS Model Provoke if you are missing parts or have questions please contact us at: Panel Pro 1-800-599-1655 or 763-755-1600 www.panelpro.
OPERATION WARNING: The following are suggestions that glove vou s general idea ol how a panel saw intended 1o be operated: No Instructions can replace comment sense and experience. Be sure you and all operators have enough time and arterial to became familiar with the general operating characteristics of this tool ang have FULLY READ AND UNDERSTOOD all general operating and safety Instructions.
Operating Procedure: Cross cutting A crosscut Is & vertical cut that must always be dona from the 16p (0 the bottom of & work spice s show in Figure 11, {See dido “General Operating Tips” above and “Limitations of the Tool" on page 161 WARNING: To reduce the risk of Injury, do not place your bands on or under the carriage iron the path ol the saw bide, Position the saw motor i the crosscutting position Witt the blade rented lyrically ' Ses "Notating the Turntable above.