Cut Sheet
DATA SHEET
NetKey
®
Category 6
Punchdown Jack Modules
www.panduit.com
Category 6/Class E, 8-position keystone jack module
terminates unshielded twisted 4-pair, 22 – 26 AWG, 100
ohm cable. Punchdown tool properly terminates each
conductor for optimum performance. Universal label is
color-coded T568A and T568B wiring schemes.
applications
Applications include:
• Ethernet 10BASE-T, 100BASE-T (Fast Ethernet), and 1000BASE-T (Gigabit Ethernet)
• 155 Mb/s ATM, 622 Mb/s ATM, 1.2 Gb/s ATM
• Token Ring 4/16
• Voice over internet protocol (VoIP)
NetKey
®
Category 6 Jack Modules
Module: NK688M*
Convenience
pack of
25 modules: NK688M*-Q
NetKey
®
Category 6 Patch Cords
Foot lengths: NK6PC3**Y
Meter lengths: NK6PC1M^Y
NetKey
®
Modular Patch Panels
24-port, 1 RU: NKPP24P
48-port, 2 RU: NKPP48P
Termination and Cable Prep Tools
Punchdown tool: PDT110‡
Punchdown base: NKSPB
JackRapid
+
Termination Tool: JR-PAN-2‡‡
Cable
snipping tool: CWST
Cable
stripping tool: CJAST
*To designate a color, add suffix IW (Off
White), EI (Electric Ivory), IG (Int’l Gray),
WH (White), BL (Black), OR (Orange), RD
(Red), BU (Blue), GR (Green) or YL (Yellow).
**For standard lengths other than 3 feet
(5, 7,10, 14 or 20) change the length
designation in part number to the desired
length. For standard cable colors other than
Off White, add suffix BU (Blue), GR (Green),
RD (red) or YL (Yellow) before the Y at the
end of the part number. For example, the
part number for a blue 5 foot patch cord is
NK6PC5BUY.
^For standard lengths other than 1 meter
(2, 3, 4 or 5) change the length designation
in part number to the desired length. For
standard cable colors other than Off White,
add suffix BU (Blue), GR (Green), RD (Red)
or YL (Yellow) before the Y at the end of the
part number. For example, the part number
for a blue 5 meter patch cord is NK6PC5MBUY.
‡Terminates the NetKey
®
Keystone
Punchdown Jack Module and NetKey
®
Patch Panel.
‡‡Terminates the NetKey
®
Keystone
Punchdown Jack Module. Fluke JackRapid
Termination Tool available through
distribution. To locate the local office,
visit www.flukenetworks.com/contact.
+JackRapid is a trademark of Fluke Networks.
NetKey
®
Network Components
technical information
Category 6/Class
E channel and
component performance:
Exceeds ANSI/TIA-568-C.2 Category 6 and ISO 11801 Class E
channel requirements at swept frequencies up to 250 MHz
Exceeds ANSI/TIA-568-C.2 and ISO 11801 Category 6
component requirements at swept frequencies up to 250 MHz
FCC and ANSI compliance:
Meets with ANSI/TIA-1096-A; contacts plated with 50 microinches
of gold for superior performance
IEC compliance:
Meets IEC 60603-7 and IEC 60512-99-001
PoE compliance:
Rated for 2500 cycles with IEEE 802.3af/802.3at and proposed
802.3bt type 3 and type 4
Safety compliance:
cULus Listed; UL 1863 and CAN/CSA-C22.2 (UL File E129886)
Operating temperature:
-10°C to 65°C (14°F to 149°F)
RoHS compliance:
Compliant
specifications
key features and benefits
100% performance tested
Confidence that each jack module delivers the specified
performance
110 style punchdown
termination
Utilizes industry standard termination style and includes a wire
retention cap
Modular
Universal keystone jack modules snap in and out of all NetKey
®
Faceplates, Modular Patch Panels, and Surface Mount Boxes for
fast moves, adds, and changes
Individually serialized
Marked with quality control number for traceability
Convenience packaging
(optional)
25 jacks packaged in one easy to open container, eliminating the
time to open each individual package and reducing on-site waste;
ideal for high volume installations