Installation Manual

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

PN379F

Page 1 of 2

DP6A 10Gig, DP6 PLUS & DP5e Patch Panels

Part Numbers: DP24*88TGY, DP48*88TGY, DPA24*88TGY, DPA48*88TGY,

DPKR24**88TG, DPKR48**88TG, DPKA485E88TG

1.5" (38.1mm)

CWST

Trim pair separator and/or

pull string if present.

T568AT568B

OR OR

PDT110

Tool

(T568B shown)

T568 BA BA

Option 1 (T568B shown) Option 2

Do not untwist

more then 1/8"

from the IDC

tower

24-Port Straight

48-Port Straight

24-Port Angled

48-Port Angled

Front

Back

T568 BA BA

(T568B shown)

T568 BA BA

(T568B shown)

* Denotes “6X” for DP6A 10Gig, “6” for DP6 PLUS and “5E” for DP5e Patch Panels.

** Denotes “6” for DP6 PLUS and “5E” for DP5e Patch Panels.

Note: Part numbers with “K” and “KR” include a label kit and strain

relief bar.

PAGE 1
DP6A 10Gig, DP6 PLUS & DP5e Patch Panels Part Numbers: DP24*88TGY, DP48*88TGY, DPA24*88TGY, DPA48*88TGY, DPKR24**88TG, DPKR48**88TG, DPKA485E88TG INSTALLATION INSTRUCTIONS © Panduit Corp. 2012 PN379F Back 24-Port Angled Front 24-Port Straight 48-Port Angled 48-Port Straight 2 1 T568B T568A CWST 1.5" (38.1mm) OR OR Trim pair separator and/or pull string if present.
PAGE 2
INSTALLATION INSTRUCTIONS © Panduit Corp. 2012 PN379F 8 7 RECOMMENDED CABLE ROUTING Angled Panels Straight Panels Optional Strain Relief Bar B B Cable Management A A Recommended cable routing for angled panel terminated ports. Terminate cables in the direction from A to B as indicated above. Jack Module Removal Depress latch on module Recommended cable routing for straight panel terminated ports.