Datasheet

2.0" (50.8mm)

(12.7mm)

TX6 PLUS and TX5e

UTP Jack Modules

Page 1 of 2

INSTALLATION INSTRUCTIONS PN403B

©Panduit Corp. 2007

For Technical Support: www.panduit.com/resources/install_maintain.asp

Part Numbers: CJ688TG**, CJD688TG**, CJ5E88TG**, CJD5E88TG**,

CJA5E88TG**, CJA688TG**

CWST

TERMINATION STEPS

CJ688TG**

Cable End 1

Cable End 2

Jack

Wire Cap

Strain

Relief

Collar

Cable End 1 Cable End 2

Pr1

Pr2

Pr3

Pr4

Pr1

Pr2

Pr3

CJ5E88TG**

CJD688TG**

CJD5E88TG**

Trim pair separator and/or ripcord if present.

** Denotes jack module color code.

PAGE 1
TX6 PLUS and TX5e UTP Jack Modules Part Numbers: CJ688TG**, CJD688TG**, CJ5E88TG**, CJD5E88TG**, CJA5E88TG**, CJA688TG** INSTALLATION INSTRUCTIONS PN403B © Panduit Corp. 2007 Strain Relief Collar CJD688TG** CJ688TG** Wire Cap Jack CJD5E88TG** CJ5E88TG** TERMINATION STEPS 2 1 3 0.5" 2.0" (50.8mm) (12.7mm) CWST Trim pair separator and/or ripcord if present.
PAGE 2
INSTALLATION INSTRUCTIONS PN403B 10 9 CWST T568B T568A Cable End 1 Cable End 1 2 1 2 1 A B 3 11 EGJT 12 Cable End 2 Cable End 2 2 1 2 A 1 B 3 A B 3 13 EGJT See note 4. REMOVAL STEPS 2 1 3 Notes: 1. For specified performance, follow TIA/EIA 568-B installation guidelines. 2. Jack Modules can terminate PVC or Plenum rated 22-26 AWG solid or stranded IWC cable with 0.048 inch (1.2 mm) maximum insulated conductor outside diameter. 3.