Cut Sheet

www.panduit.com
applications
specifications
Trays, drawers and pre-loaded trays shall be
constructed of steel material. Drawers shall
have built-in bend radius control clips. Trays
and drawers shall have removable top cover
to provide easy access to splices and cable
storage. Pre-loaded trays shall have a
removable patch panel to allow for rear
access from front of unit.
Panduit
®
Opticom
®
Trays, Drawers and
Preloaded Trays are designed to manage
and organize fiber distribution in areas where
space is limited. They can also be used to
manage cable from outside the facility.
Enclosures can be used as an interconnect
or cross-connect in any telecommunications
room and can use any standard FAP or FMP
series adapter panel. Opticom
®
Trays and
Drawers are completely modular and can
manage both fiber and copper cables.
Opticom
®
Trays, Drawers and
Preloaded Trays
Opticom
®
Trays
Up to 48 fibers: FMT1
Up to 96 fibers: FMT2
Opticom
®
Drawers
Up to 48 fibers: FMD1
Up to 96 fibers: FMD2
Opticom
®
Preloaded Trays
12 duplex SC: FT1W12DSC
12 ST bronze: FT1W12ST
24 ST bronze: FT1W24ST
24 Mini-Com
®
openings: FT124MC
Adapter Panels
6 FJ: FMP6
Blank panel: FAPB
ST Adapter Panels
6 ST: FAP6WST
8 ST: FAP8WST
SC Adapter Panels
6 simplex SC: FAP6WBUSC
3 duplex SC: FAP3WBUDSC
6 duplex SC: FAP6WBUDSC
Opticom
®
Patch/Splice Kits
Splice tray: FST24S
(accepts up to 24 mechanical or fusion splices)
Splice
tray holder: FSTHED
(accepts up to 4 FST24S splice trays)
Fiber Adapter Patch Panel
For use
with FMT1: CFAPPBL1
For use
with FMT2: CFAPPBL2
SPECIFICATION SHEET
technical information
Dimensions: FMT1: 19.00"W x 1.77"H x 11.16"D
(482.60mm x 44.9mm x 283.4mm), 1 RU
FMT2: 19.00"W x 3.48"H x 11.16"D
(482.60mm x 88.3mm x 283.4mm), 2 RU
FMD1: 19.00"W x 1.77"H x 15.33"D
(482.60mm x 44.9mm x 389.5mm), 1 RU
FMD2: 19.00"W x 3.48"H x 15.40"D
(482.60mm x 88.3mm x 391.2mm), 2 RU
FT1W12DSC: 19.00"W x 1.73"H x 8.01"D
(482.60mm x 43.9mm x 203.4mm), 1 RU
FT1W12ST: 19.00"W x 1.73"H x 8.01"D
(482.60mm x 43.9mm x 203.4mm), 1 RU
FT1W24ST: 19.00"W x 1.73"H x 8.01"D
(482.60mm x 43.9mm x 203.4mm), 1 RU
FT124MC: 19.00"W x 1.73"H x 8.01"D
(482.60mm x 43.9mm x 203.4mm), 1 RU
key features and benefits
Trays and Drawers:
Side and rear cable entry
Provides installer with several options to route cable within
the rack
Removable rear tray cover Provides easy access to splices and cable storage
Patch panel mounting Hardware provided to allow patch panel to be
preassembled to unit before mounting to rack
Trays:
Modular design
Versatility to accept 24 port Mini-Com
®
Faceplate, all
metal modular patch panel or fiber adapter patch panels
Preloaded trays:
Modular design
Mounts flush on 19" or 23" racks; also mounts 2.0"
recessed on 19" racks or cabinets
Removable patch panel
Allows for rear access from front of unit