PRODUCT USER MANUAL 802.11 Wireless Wi-Fi Adapter 150M/300M/433Mbps 802.11Wireless Wi-Fi Adapter User Manual Version:V1.
PRODUCT USER MANUAL 802.11 Wireless Wi-Fi Adapter 1. Installation Steps Installation steps of adapter driver program is same when it is installed in different operation system. Here takes the steps under Windows 7 for example to explain the installation process. 1. Double click the icon of installation package to start the installation. 2. Choose "I accept the terms of the license agreement" and click "Next".
PRODUCT USER MANUAL 802.11 Wireless Wi-Fi Adapter 3. Users can choose the installation type for the actual needs. "Install driver and Mediatek WLAN Utility" is our recommended choice. 4. An UI will pop up to prompt that the system is ready for the installation, then click "Install".
PRODUCT USER MANUAL 802.11 Wireless Wi-Fi Adapter 5. The system will show the installation processing bar. After the installation, another interface will show up. 6. When installation process is done, system will remind this information. Click "Finish" will accomplish the installation and log out from installation wizard automatically. Notice: If you want to change the installation setup, please click "Back" to return to previous page to set it up again.
PRODUCT USER MANUAL 802.11 Wireless Wi-Fi Adapter 2. System Connection 2.1 Check Device Condition After finishing the installation, users can find an icon on the task bar, this icon has the information that our product is not existed. Therefore, users need to plug our adapter into the target USB2.0 port. After plugging in, blue LED indicator on adapter will turn on. At the same time, icon inform users that device is available but waiting for connecting. Users can check its condition in Device Manager.
PRODUCT USER MANUAL 802.11 Wireless Wi-Fi Adapter Double click device name "802.11ac Wireless LAN Card" can check its condition, and the condition will be shown like the below: Click "OK" can finish this step. 2.2 Device Connection 1.
PRODUCT USER MANUAL 802.11 Wireless Wi-Fi Adapter 2. Click ,users can check all available wireless networks: 3. Choose the desired wireless netowrk name, the AP information of that network will be shown at the bottom for reference. Click a) will start the connection. If the encryption pattern is NONE, system will start auto-connection, and the basic information of that network will be seen on home page.
PRODUCT USER MANUAL 802.11 Wireless Wi-Fi Adapter c) Click to go to next step to input WPA preshared key. d) Click to go to next step. If users input the correct key number, the connection will be done successfully. Left part is the basic informaton of the connected network. On the right part, is used to remark the connected one. 4. When the connection is established, LED indicator on device will keep blinking, and users can enjoy the connected network environment.
PRODUCT USER MANUAL 802.11 Wireless Wi-Fi Adapter 3. Home Page Introduction Home page will display some basic information of the connected network, such as SSID, IP address, communication rate, channel, and subnet mask. We will explain the usage of those functional buttons in the red square frol left to right. 1. button:This button is for searching all usable wireless networks. By clicking it, a page will show all networks that users can use for check.
PRODUCT USER MANUAL 802.11 Wireless Wi-Fi Adapter Click can refresh the list information, click will guide users to "Profile Settings" page for the connection setup of desired network. Follow and guide and click to finish the connection setup. Right click the selected network, users can get the 3 ways of network sequencing. Users can choose the preferred one to sequece the list for convenient check. Click can connect to network and enter the page of "Profile Settings"directly.
PRODUCT USER MANUAL 802.11 Wireless Wi-Fi Adapter 2. button:Click this button can gain network link information. button: Showing the link information just like the page above s hows. button: giving some link data information, such like link quality, signal strength, transmit rate and receive rate. button: Providing some data information about some statistic information about transmitting and receiving.
Remark: WPS function needs device (WiFi adapter) support for WPS button. PRODUCT USER MANUAL 802.11 Wireless Wi-Fi Adapter 3. button: Users can enter "Profile List" page by clicking it. Click button, can add a network connection into system, users can refer to chapter 3.2 for detailed information. Click button, can delete the chosen network connection. Click button can do edit operation. Click button, can import some files into system.
PRODUCT USER MANUAL 802.11 Wireless Wi-Fi Adapter 4. 5. button: This button is for advanced setup. button: This button is for checking product version, MAC address information.
PRODUCT USER MANUAL 802.11 Wireless Wi-Fi Adapter 4. Device Mode Switch Here are 2 extra work modes for users to choose according to their actual needs and real situation: Client+AP mode and AP mode. Client+AP mode can make device connect WLAN and use itself as a Wi-Fi hotspot simultaneously; AP mode is for access point mode. 4.
PRODUCT USER MANUAL 802.11 Wireless Wi-Fi Adapter 5. Disclaimer This DATA SHEET document is the guidance of the installation and tentative usage of our products. Before operating the product, please read this data sheet carefully. All rights reserved. Any reproduction, translation or simplification of this data sheet in whole or in part is strictly prohibited without written permission from our company. We do not provide any guarantee about this data sheet, software or other relevant information.