Technics Compact disc changer SL-PDIO00 Operating Instructions DIGITAL Before connecting, operating or adjusting read these instructions completely this product, 4 o AUDIO please
Dear Customer Thank you for purchasing this Technics product. For optimum performance and safety, please read these instructions carefully. The model number and serial number of this product found on either the back or the bottom of the unit. can be Please note them in the space provided below and retain them for future reference. MODEL NUMBER SL-PD1000 Before use Precautions ........................................ Front panel controls .............................. Connections ....................
(Only for U.S.A) CAUTION! This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
Before usingthisunitplease readtheseoperating instructions carefully. Take special caretofollowthewarnings indicated on theunititselfaswellasthesafety suggestions listed below. Afterwards keep themhandy forfuturereference. Power Source -- The unit should be connected to power sup- 6. Carts and Stands -- The unit should be used only with a cart or stand that is recommended by the manufacturer. The unit and cart combination should be moved with care.
/ No. Name 1_ Power "STANDBY _/ON" switch (POWER, STANDBY ILl)ION) No. Ref. page Memory reserve buttonlindicator (OFFION) 10 ID scan button (ID SCAN) 15 Edit guide button (EDIT GUIDE) 18 Remote control signal sensor (SENSOR) 7 Display Disc skip button (DISC SKIP) (_ Program mode button (PROGRAM MODE) Auto cue button (AUTO CUE) Ref.
Please check and identify the supplied accessories. D AC power supply cord [1] (SJA175) _] Stereo connection (SJP2249-6) cable [1] D Remote control transmitter (RAK-SL122WH) [1] D Batteries [2] (UM-4, "AAA", Before connecting the changer to your audio system, make sure that the power of the changer and all other system components is turned off.
Battery Method installation Insert the batteries included with this unit as shown below, for use Use the remote control within 60 degrees and within 7 meters (23 ft.) facing directly toward the changer's remote control signal sensor. Remote control signal sensor CD changer \ Check the (+) and (-) sides. When you need to replace these batteries Use two UM-4 "/V_A'°, tEC R03 (1.5 V) or equivalent batteries. Avoidany obstacles. <222> Battery or batteries About 7 meters in front of the sensor.
Sequential play All of the discs will be played, selected disc. beginning from track 1 on the 5 r _. qo_m E_Toul_ DISC SKIP SESaOR r----l--i 1+_ 4 l, _ i t e 1o o >1o _r-1C:3r_l E3 I::_ E:3r_l r_l C3 C3 _, OPEN_OSE I "1 I I Loadin(. drawer The explanation below is an example of operation in the case where all five disc trays in the changer are holding CDs. .......... ,.<>w,=,4 .....Pr",,POwE";................ L_ to close the loading drawer. The unit will switch on.
_!_!_!_!_:_!_!_5!_!_!_!_!_!_!_!_!_!_!_!_:_!_!_!_!_i!i!_!i!i!i!ii!i_i!i!i_i_i_i_i!i_i_i_ii_i_i_i_i_i_i_i_i_i_i_ii_i_i_i_i_i_iiiii_i_i_i_i_iiiii_i_i_i_:_i_i_i_i!ii_i_i_i_i_i_i_i!_i_i_i!i!i_i!i!i!i!i!i!i!i!_!i!i!i!i!i_!_!i!_i_!_!_!i_!i!i!_!_!_i!_!_!_!i!_!i!_!_:::_!_!_!!!_i_!_!_!_!_i_i!_!!!_i!i_i!i_i!i_i! i!iii!_iii!i!i!iii_iii!!i!i_ii!_!ii!i_i_ii_i_i_i!i_i_ii!i!i_i_i_i_i_i_ii_ii_ii_ii!i_!_!i_i_ii_i!_i_i!_ii_i_ii_!_!ii!_!_!i_!_!_i_!_i_!_i_ii_!_!_!_!_!_!_:__!_!_ii_ OPENICLOSE 1 2 ..
Memory reserve function It is possible to reduce the length of the silent intervals which occur in between the changing of discs. Memory reserve Flashes when playback starts to indicate that the sound is being loaded into memory. After about 10 seconds, the memory becomes and the indicator illuminates steadily.
You can program up to 32 selections from the five discs in any order as you desire. completed the desired entry. If you enter non-existing disc(s) or track(s) soon after the loading drawer is closed or when it is open, the corresponding indicator illuminates and the entry is included in the count. In the play mode, the changer will cancel the non-existing entry. If you attempt a 33rd selection, the "tion will be displayed. ====== I I I F" (full) indica- I ..... ,0,,..pi,;;........
Using the remote transmitter All of the tracks will be played one time each in random order. There are two types of random play as described below. control RANDOM MODE 2 <22 I'1.[ 5855_5_ RECALL CLEAR )1_ i _ i Ea One disc random play The changer will play all tracks on the current disc in a random order. Then it will choose a new disc randomly, excluding the discs already played, and play all tracks on that disc in a random order.
Youcanselect upto32selections thatyoudonotwanttohear andputtheminthechanger's memory. Then youcanenjoysequential, onediscrandom, or fullrandom playofonlyyour favorite tracks. 3 2 " epe';l' steps 2 e'liiJ 3 Uniil' 'Yo" "It"re completed the desired entry. If you enter non-existing disc(s) or track(s) soon after the loading drawer is closed or when it is open, the corresponding indicator illuminates and the entry is included in the count. In the play mode, the changer will cancel the non-existing entry.
Using the remote transmitter The changer plays the first tracks on all the loaded discs in sequence, followed by the second tracks on all the discs, and so on. (Refer to the illustration below.) control SPIRAL Ig, ,_, =__,1 >,o ,_, .._=, ..... ! n .= .=_. RECALL CLEAR _-_ Example: When starting from disc 1 Spiral play To confirm RECALL the % selections 1o be deleted Press RECALL.
This function is convenient to use when searching for a desired track. The function will search from the beginning of the track for a loud section, and will play 10 seconds of the track centering that point. The order of scanning is the same as for play mode. I •
To skip discs To skip tracks Use this function to skip discs when selecting a disc to which you wish to listen, and when loading and unloading the discs. Use this function to skip tracks when selecting you wish to listen. a track to which DISC SKIP 1_14 SKIP I_I_H _____J Oooooc I"1"1 " "1 I _' You can use this function in stop, sequential play, one disc random play and delete play modes. DISC SKIP % Press DISC SKIP to rotate the disc tray. "L......__._ ,.,., I SK,.
Play will continue mode selected. endlessly in accordance with the specific play The auto cue function allows the unit to wait in a standby condition at the beginning of each track so as to start play right when you are ready. When each track finishes playing, the unit skips to the beginning of the next track and switches to the play standby mode. 1 -.... J 23 f O00C I REPEAT [Before or during play] [_ Press I' 0 0__ "11 ....;u;o;u_ ....P;;;,,,auto"ouE............. REPEAT.
When recording, the changer will automatically program tracks for tape sides A and B in accordance with the length of tape so that none of the tracks will be interrupted before they completed. In addition, the program will also include a silent interval of proximately 4 seconds between tracks. the the are "P;epa;. t,; t.P.aockioirecordi'Oi ''' Set the Dolby NR, reverse mode, etc., as instructed in the Operating the tape deck. ap- Set so that recording of the tape.
(Only available then immediately:] [Start on the tape deck and Pressrecording I_. E_ When the last track set for recording The various from the remote control.) time information of the disc can be on side A is finished, the changer will enter the pause mode. Set the tape to the position from which recording will begin on side B, and then perform step TIME 4 once again. MODE __''7: .'. '_._.
Basic operation POWER To turn OFFION the main unit © OPEN/ To openlclose the loading drawer DISCSKIP To rotate the carousel _OWER O__ CD 1 DISC 1 To select the desired disc number ...... oo 616 0000 0 To select the desired track number 0 3 DISC 3 2.30 2 3, To..,.°t.,..°, 6666 O0 2 DISC 2 ©©© ©© O 0 O 06 4DISC4 5DISC5 119 O and10: Press the corresponding O 7 O 8 O 9 _10 10 number on the keypad.
Program/delete play Select program or delete mode. Each time the button is pressed, the program/delete mode will change in the following order: PROGRAM MODE 0 __ --,(off) 1 1 DISC t 0 0 I_ 5 D_,C5 6666---1 ooo5 0 2 DISC 2 3 D_SC3 >10 4 DISC4 5 DISC 5 6 0 7 8 9 0000 (_ © ,CZZ) CZ) Select the track number. Repeat steps (_ and(_ until you have completed the desired entry. / • Start play.
With this changer, you can only play compact discs having this mark: Handling precautions To open the compact disc case, gently press the sides of the top and pull up. To remove the disc from the case, press the center holder and lift the disc, holding by the edges. r_mcr,1,,J Before moving the changer to another location, be sure to carry out the "Preparations for moving the unit" described below. Failure to do so will expose the compact the risk of severe damage.
Before requesting service forthisunit,check thechartbelow for apossible cause oftheproblem youareexperiencing. Some simplechecks oraminor adjustment onyourpartmayeliminate the problem andrestore proper operation. If youareindoubtabout some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to the directory of authorized service centers (enclosed with this unit) to locate a convenient service center, or consult your Technics dealer for instructions. (In U.S.A.
• AUDIO No. of channels Frequency response Output voltage Dynamic range S/N Total harmonic distortion Wow and flutter DA converter • GENERAL 2 (left and right, stereo) 2-20,000 Hz, :1:1dB 2 V (at 0 dB) 92 dB 100 dB 0.007% (1 kHz, 0 dB) Below measurable limit Output Impedance Load impedance MASH (1 bit) Approx. 1 k_ More than 10 k_ Power consumption Power supply Dimensions (W x H x D) Weight Note: Specifications are subject to change without notice. Weight and dimensions are approximate.
