Manual

ST-CH505
E-CH717
- SE-CH515D
_L-CH515
For SC-CH717 only
Connect the flat cable.
Connecting
Disconnecting
1. Connect the shorter flat cable to the terminal of the
tuner/sound processor and amplifier.
2. Connect the longer flat cable to the terminal of the
tuner/sound processor, compact disc changer, and cas-
sette deck.
Route the cable horizontally (underneath the heat outlet
grille) so that the side with the white-colored lead is posi-
tioned facing to you.
Be sure to connect the blue-colored connector to B1
(tuner/sound processor).
After connection, fold and press the cable as flat to the back
of the unit as possible.
Heat outlet grille
Do not try connecting or disconnecting the flat
cable while the power is switched to ON.
Connect the FM indoor antenna.
Install the antenna on a wall at a height, and in a direction,
which results in the best reception.
Adhesive tape
FM indoor antenna
(included)
The tip of the internal antenna wire should not come into
contact with any metal objects.
When you cannot get a good reception with this FM indoor
antenna, we recommend you install an FM outdoor antenna.
(Not included. See page 10.)
8