Manual

,',.',
4,
%
Q Press < or • to select the
desired preset channel.
Q Press SET.
Prepare for recording.
1. Insert a cassette into deck 2.
2. Select the Dolby NR.
3. Select the reverse mode.
4. Select the tape travel direction.
?
POWER
STANDBY
o
Press POWER on the amplifier
to switch the power to standby
mode.
Please confirm [] REC appears on the
display.
The sound will be automatically muted
during timer recording.
[_REC
%
To cancel the timer:
Press [] REC to go out [] REC on the
display.
The record timer will not function, but the record timer setting will
stay in the memory.
Iv_t';_'tlR
If you make an error:
Follow the procedure from the first step.
About the variation of the day setting:
One day from Sunday to Saturday: SUN...SAT
Everyday from Sunday to Saturday: SUN-SAT
CLOCK/
TIMER
%
To confirm the record timer:
Press CLOCK/TIMER to show [] REC
on the display.
MULTiCONmOL
n-,,'-,,- ,- ,_
IW I-r I--" t_ S_LEC,
The display will show the ON time, OFF
time, the broadcast band you select, in
2 second steps.
To change the record timer setting:
Press CLOCK/TIMER to return to step 1.
Using the timer at the same time setting continu-
ously:
You can accomplish this even if the system is in the standby mode.
1. Press [] REC to show [] REC on the display.
2. Press POWER to switch the power to standby mode.
To enjoy the desired source after the timer setting
is completed:
1. Start playing the desired source.
When listening to a cassette tape, use deck 1.
Even if you change the sound source, the timer recording will
start with the preset condition.
2. After enjoying the source, prepare for recording, and then press
POWER to standby mode.
oWhen the record timer is functioning, you cannot confirm the record
timer.
eThis system retains the ON/OFF time settings until you make a new
setting. In case you make a new ON time setting which is later than
the previous OFF time setting, the system automatically advances
to the day you set on step 3. When you reset the OFF time, the day
setting will return to the original setting.
eThe ON time and OFF time cannot be identical.
elf the power is on, the timer will not function.
eOnce the record timer operation finishes, it clears the record timer
mode (except for "everyday from Sunday to Saturday" mode).
eWhen you want to record a same program over several weeks,
(except when you select "everyday from Sunday to Saturday"
mode), press [] REC to show [] REC on the display after the timer
recording has finished.
For your reference:
While timer recording is taking place, the volume level will be auto-
matically muted.
49