TGD56x(en)_QG.fm 1 ページ 2017年6月1日 木曜日 午前9時23分 KX-TGD560/KX-TG3760 KX-TGD562/KX-TGD563 KX-TG743SK/KX-TGD564/KX-TG744SK Model No. Quick Guide Connections Base unit 1 Connect the AC adaptor to the unit by pressing the plug firmly. 2 Connect the AC adaptor to the power outlet. 3 Connect the telephone line cord to the unit, then to the single-line telephone jack (RJ11C) until you hear a click. 4 A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service.
TGD56x(en)_QG.fm 2 ページ 2017年6月1日 木曜日 午前9時23分 Battery installation/Battery charging Charge for about 7 hours. 4 2 3 2 1 1 Note: L USE ONLY rechargeable Ni-MH batteries AAA (R03) size ( 1 ). L Do NOT use alkaline/manganese/Ni-Cd batteries. L Confirm correct polarities (S, T). L Follow the directions on the display to set up the unit. L Confirm “Charging” is displayed ( 2 ).
TGD56x(en)_QG.fm 3 ページ 2017年6月1日 木曜日 午前9時23分 Date and time (Handset) 1 2 3 4 {MENU}(1)1 Enter the current month, date, and year. s {OK} Enter the current hour and minute (12-hour clock format). *: Select “AM” or “PM”. s {SAVE} s {OFF} Recording your greeting message of the answering system for the landline (Handset) You can record your own greeting message instead of using a pre-recorded greeting message.
TGD56x(en)_QG.fm 4 ページ 2017年6月1日 木曜日 午前9時23分 Link to cell Pairing a Bluetooth cellular phone 1 Base unit: Press and hold {CELL 1} or {CELL 2} for about 5 seconds. L After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. 2 Your cellular phone: While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode.
TGD56x(en)_QG.fm 5 ページ 2017年6月1日 木曜日 午前9時23分 Link to cell Connecting/disconnecting the cellular phone (Handset) Auto connection to the Bluetooth devices (cellular phones) The unit connects to the Bluetooth devices at regular intervals if the connection is lost. To change the interval (default: “1 min”), see the operating instructions.
TGD56x(en)_QG.fm 6 ページ 2017年6月1日 木曜日 午前9時23分 Basic operations Making/Answering calls (Handset) Making cellular calls 1 2 Dial the phone number. s {CELL} L When the cellular line only mode is set, you can also press {C}/{s} instead of {CELL}. L When only 1 cellular phone is paired, the unit starts dialing. When 2 cellular phones are paired: {r}: Select the desired cellular phone. s {SELECT} Making landline calls Dial the phone number.
TGD56x(en)_QG.fm 7 ページ 2017年6月1日 木曜日 午前9時23分 Basic operations Answering system for the landline (Base unit) Answering on/off Press {ANSWER ON/OFF} to turn on/off the answering system.
TGD56x(en)_QG.fm 8 ページ 2017年6月1日 木曜日 午前9時23分 Using Bluetooth devices Using a Bluetooth headset (optional) By pairing a Bluetooth headset to the base unit, you can enjoy hands-free conversations when talking on landline calls. L Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line*1). *1 You cannot use a Bluetooth headset to talk on a cellular line.
TGD56x(en)_QG.fm 9 ページ 2017年6月1日 木曜日 午前9時23分 Frequently asked questions Question Cause/solution Why is _ displayed? L The handset is too far from the base unit. Move closer. L The base unit’s AC adaptor is not properly connected. Reconnect AC adaptor to the base unit. L The handset is not registered to the base unit. Register it. 1 Handset: {MENU}(13) 2 Base unit: Press and hold {LOCATOR} for about 5 seconds. 3 Handset: Press {OK}, then wait until a long beep sounds.
TGD56x(en)_QG.