Operating Instructions Link2Cell Cordless Telephone with Digital Answering Machine Model No. KX-TGD560 KX-TGD562 KX-TGD563 KX-TG743SK KX-TGD564 KX-TG744SK Model shown is KX-TGD560. Before initial use, see “Getting Started” on page 11. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. Consulte “Guía Rápida Española”, página 73. For assistance, visit our Web site: http://shop.panasonic.
Table of Contents Introduction Caller ID Service Model composition .......................................3 Accessory information ..................................3 Graphical symbols for use on equipment and their descriptions ..........................................6 Using Caller ID service ...............................43 Caller list ....................................................43 Using Bluetooth® Devices For your safety .............................................
Introduction Model composition Base unit Handset Part No. Part No. KX-TGD560 KX-TGD560 KX-TGDA51 1 KX-TGD562 KX-TGD560 KX-TGDA51 2 KX-TGD563 KX-TGD560 KX-TGDA51 3 KX-TG743SK KX-TGD560 KX-TGDA51 3 KX-TGD564 KX-TGD560 KX-TGDA51 4 KX-TG744SK KX-TGD560 KX-TGDA51 4 Series Model No. KX-TGD560 series Quantity Accessory information Supplied accessories No.
Introduction F Additional/replacement accessories Please contact your nearest Panasonic dealer for sales information (page 83). Accessory item Model number/Specifications Rechargeable batteries HHR-4DPA*1 R To order, please visit http://shop.panasonic.com/support Battery type: – Nickel metal hydride (Ni-MH) – 2 x AAA (R03) size for each handset Range extender KX-TGA405*2 Key detector KX-TGA20*3 *1 *2 *3 Replacement batteries may have a different capacity from that of the supplied batteries.
Introduction Bluetooth® devices You can expand your phone system by pairing the following units to a single base unit. Your Bluetooth cellular phone*1: 2 max. (for cellular calls: page 17) Your Bluetooth headset*1: 1 max. (for a wireless hands-free conversation: page 48) *1 Your cellular phone and headset must be Bluetooth wireless technology compatible. For more details and the list of compatible cellular phones, please visit our Web site: http://shop.panasonic.
Introduction Graphical symbols for use on equipment and their descriptions Symbol 6 Explanation Symbol Explanation Alternating current (A.C.) Class P equipment (equipment in which protection against electric shock relies on Double Insulation or Reinforced Insulation) Direct current (D.C.
Important Information For your safety To prevent severe injury and loss of life/ property, read this section carefully before using the product to ensure proper and safe operation of your product. WARNING Power connection R Use only the power source marked on the product. R Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock. R Completely insert the AC adaptor/power plug into the power outlet.
Important Information R This product is unable to make calls when: – the handset batteries need recharging or have failed. – there is a power failure. Battery R We recommend using the batteries noted on page 4. USE ONLY rechargeable Ni-MH batteries AAA (R03) size. R Do not mix old and new batteries. R Do not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed.
Important Information R If the reception for a base unit location is not satisfactory, move the base unit to another location for better reception. Environment R Keep the product away from electrical noise generating devices, such as fluorescent lamps and motors. R The product should be kept free from excessive smoke, dust, high temperature, and vibration. R The product should not be exposed to direct sunlight. R Do not place heavy objects on top of the product.
Important Information Specifications R Standard: DECT 6.0 (Digital Enhanced Cordless Telecommunications 6.0) Bluetooth wireless technology 2.1 R Frequency range: 1.92 GHz to 1.93 GHz (DECT) 2.402 GHz to 2.48 GHz (Bluetooth) R RF transmission power: 115 mW (max.) R Power source: 120 V AC, 60 Hz R Power consumption: Base unit: Standby: Approx. 1.2 W Maximum: Approx. 4.5 W Charger: Standby: Approx. 0.1 W Maximum: Approx. 1.
Getting Started n Charger Connect the AC adaptor to the power outlet. Setting up Connections R If you do not connect the telephone line cord and use only cellular lines, set the cellular line only mode to use this unit more conveniently (page 19). n Base unit Connect the AC adaptor to the unit by pressing the plug firmly. Connect the AC adaptor to the power outlet. Connect the telephone line cord to the unit, then to the single-line telephone jack (RJ11C) until you hear a click.
Getting Started Removing the battery Note when setting up Note for connections R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) R The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a horizontally oriented AC outlet that faces the floor, such as an AC outlet installed on a ceiling or under a table, as the weight of the adaptor may cause it to become disconnected.
Getting Started Icon Battery level Controls Empty Panasonic Ni-MH battery performance (supplied batteries) Operation Operating time In continuous use 10 hours max.*1 Not in use (standby) 5 days max.*1 *1 Handset G H If eco mode is on. Note: R Actual battery performance depends on usage and ambient environment. A I B Intelligent eco mode This feature automatically reduces handset power consumption by suppressing handset transmission power when the handset is close to the base unit.
Getting Started MANSWER ON/OFFN MCELL 1N (For pairing) M N (Repeat) MLOCATORN R You can locate a misplaced handset by pressing MLOCATORN. M N (Assist) MFLASHN R You can use the handset to operate the voice recognition feature of your N cellular phone by pressing M (page 48). Charge contacts n Control type Soft keys By pressing a soft key, you can select the feature shown directly above it on the display. After a cellular phone is paired, MCELLN is displayed.
Getting Started Item Meaning Status Meaning Silent mode is on. (page 40) On A cellular phone is connected. Ready to make/receive cellular calls. Flashing – The cellular line is in use. – Phonebook entries are being copied from a cellular phone (page 45). – The base unit is searching for the paired cellular phone. – The base unit is pairing a cellular phone. – A cellular call is on hold. – The remote voice assist feature is in use (page 48). Flashing rapidly A cellular call is being received.
Getting Started Status Meaning Light off – A Bluetooth headset is not paired to the base unit. – The Bluetooth headset is not connected to the base unit. Language settings Recording your greeting message You can record your own greeting message instead of using a pre-recorded greeting message. See page 51 for details. Display language 1 2 Note: R When English is selected as the display language, 12-hour clock format is used. When Spanish is selected, 24-hour clock format is used.
Link to Cell Link to cell feature You can connect your base unit and cellular phone using Bluetooth wireless technology, so that you can make or answer cellular calls using your phone system. This allows you to: – use the unit to talk on cellular calls even if some areas of your home have poor cellular reception, simply by placing your cellular phone in an area with good reception. – talk on cellular calls even if your cellular phone is in your pocket or bag.
Link to Cell 1 For CELL 1: MMENUN#6111 For CELL 2: MMENUN#6112 2 MbN: “Yes” a MSELECTN R When the cellular phone is unpaired, the CELL indicator is turned off. 3 MOFFN Link to cell settings Selecting which unit receives cellular calls You can select which unit rings and receives calls for a cellular line. When “All” is selected, all handsets and the base unit ring. 1 For CELL 1: MMENUN#6271 For CELL 2: MMENUN#6272 2 MbN: Select the desired handset or “All”.
Link to Cell Important: R When 3 Bluetooth devices (2 cellular phones and 1 headset) are paired to the base unit, only 2 Bluetooth devices can be used with the unit at the same time, and the base unit loses its connection from other Bluetooth devices. To automatically resume the connection to Bluetooth devices, leave the auto connection on. R Some cellular phones lose connection after usage, please check the specifications of your cellular phone for more details.
Link to Cell Cellular line selection This feature determines which cellular line is selected to make cellular calls when: – you press MCELLN on the handset. – you press M N or MZN on the handset while the cellular line only mode is turned on. The following settings are available: – “Manual” (default): You can select the desired cellular line when making a call. – “Cellphone 1”*1: CELL 1 is selected. – “Cellphone 2”*1: CELL 2 is selected.
Making/Answering Calls Making cellular calls Important: R The unit can be used to talk on 2 lines at the same time (for example, 2 cellular lines, or the landline and 1 cellular line). R Only 2 Bluetooth devices can be used with the unit at the same time (for example, 2 cellular lines, or the headset and 1 cellular line*1). R Before making calls, confirm that the corresponding on the handset is displayed (page 14). *1 You cannot use a Bluetooth headset to talk on a cellular line.
Making/Answering Calls To switch back to the receiver, press MZN/ N. M R In step 1, you can store the dialed phone number to the phonebook by pressing and holding MFN W for a few seconds. Making a call using the redial list The last 5 phone numbers dialed are stored in the redial list (48 digits max. each). 1 2 3 MEN REDIAL MbN: Select the desired entry. M N Pause (for PBX/long distance service users) A pause is sometimes required when making calls using a PBX or long distance service.
Making/Answering Calls the desired cellular line and press MSELECTN. To release hold on the landline: N. Press M R Another handset user can take the call N. by pressing M Note: R Please contact your phone service provider for details and availability of this service in your area. Note: R After holding for 10 minutes, the call is disconnected. Temporary tone dialing for landline calls (for rotary/pulse service users) Mute Press * before entering access numbers which require tone dialing.
Making/Answering Calls ready to talk before transferring. For example, if your cellular phone has a top cover, open it beforehand. Transferring calls, conference calls Outside calls can be transferred or a conference call with an outside party can be made between handsets. 1 2 3 4 5 During an outside call, press MMENUN. MbN: “Intercom” a MSELECTN MbN: Select the desired unit. a MSELECTN Wait for the paged party to answer. R If the paged party does not answer, press MBACKN to return to the outside call.
Making/Answering Calls 3 To answer the 2nd call: N or MCELLN while the 2nd call Press M is being received. 4 To hang up the 2nd call and return to the 1st call (cellular call), press MOFFN, then press MCELLN.*1 If you press MCELLN and the selection list is displayed, select the desired cellular line and press MSELECTN. *1 Intercom Intercom calls can be made between handsets. Note: R When paging unit(s), the paged unit(s) beeps for 1 minute.
Call Block Call block You can press the MCALL BLOCKN button in the following situations to disconnect the current call and add a phone number to the call block list: – when an incoming call is being received – when an incoming call is being recorded by the answering system – when talking on an outside call Once a phone number has been added to the call block list, the unit will block calls from that phone number in the future. 1 Press MCALL BLOCKN under the situations shown above.
Call Block “Call block” a MSELECTN a Go to step 4. 3 4 5 MCALL BLOCKN MbN: “Yes” a MSELECTN Edit the phone number if necessary (24 digits max.). a MSAVEN a MOFFN “No”: The first ring is muted for all calls. If this setting is selected, the unit will never ring for calls from blocked phone numbers.
Phonebook Key Operation Phonebook MFN MEN Move the cursor You can add 3,000 names (16 characters max.) and phone numbers (24 digits max.) to the phonebook, and assign each phonebook entry to the desired group (page 29). The following groups are available: – Group 1: “Home”*1 (default) – Group 2: “Cell 1”*1 – Group 3: “Cell 2”*1 – Group 4-9: You can change the group name for each group. *1 For groups 1-3, the group names cannot be changed.
Phonebook 3 4 5 MSAVEN Continue from step 3, “Editing entries”, page 30. n When a cellular phone is not paired: 1 MCN CID 2 5 To set group ringer tone MbN: Select the current setting of the group ringer tone. a MSELECTN a MbN: Select the desired ringer tone. a MSAVEN 6 MOFFN MbN: “Phonebook” a MSELECTN MbN: Select the desired entry. a MMENUN R To edit the number: MbN: “Edit” a MSELECTN Press MEDITN repeatedly until the phone number is shown in the desired format.
Phonebook Editing entries 1 2 3 4 5 Find the desired entry (page 29). MMENUN a MbN: “Edit” a MSELECTN Edit the name if necessary. a MOKN Edit the phone number if necessary. a MOKN MbN: Select the desired group (page 29). a MSELECTN 2 times a MOFFN Speed dial You can assign 1 phone number to each of the dial keys (1 to 9) on the handset.
Phonebook Erasing an entry 1 Press and hold the desired speed dial key (1 to 9). a MMENUN 2 3 MbN: “Erase” a MSELECTN MbN: “Yes” a MSELECTN a MOFFN Viewing an entry/Making a call n Using a cellular line: 1 Press and hold the desired speed dial key (1 to 9). 2 MCELLN R The unit starts dialing immediately in the following situations. – Only 1 cellular phone is paired. – A specific line is set to make cellular calls (page 20). 3 MbN: Select the desired cellular phone.
Programming Menu list To access the features, there are 2 methods. n Scrolling through the display menus 1 MMENUN 2 3 4 Press MCN or MDN to select the desired main menu. a MSELECTN Press MCN or MDN to select the desired item from the next sub-menus. a MSELECTN Press MCN or MDN to select the desired setting. a MSAVEN n Using the direct command code 1 MMENUN a Enter the desired code. Example: Press MMENUN#101. 2 Select the desired setting. a MSAVEN Note: R To exit the operation, press MOFFN.
Programming Sub-menu 1 Sub-menu 2 Settings Code Settings Ring count*1 Toll saver 2-7 rings <4 rings> #211 54 Recording time*1 <3 min> 1 min Greeting only*2 #305 55 Remote code*1 <111> #306 53 Screen call Off #310 54 Answer on*1 – – #327 51 Answer off*1 – – #328 51 Main menu: “Voicemail access”*3 Operation Code Listening to voicemail messages. #330 Main menu: 56 “Intercom” Operation Code Paging the desired unit. #274 For assistance, please visit http://shop.
Programming Main menu: “Bluetooth” Sub-menu 1 Sub-menu 2 Link to cell – 1:Add new device*4 (for CELL 1) – 2:Add new device*4 (for CELL 2) Connect*1/ Disconnect*1 Settings Code – #6251*5 Ringer volume – Handset Off–6 <6> Ringer volume – Base unit*1 Off–6 <1> Ringer tone*7 *5 *6 #6291*5 Select unit to ring*1 Handset 1-6 #6271*5 Ring as cell (limited)*1 On (without Talking CID) Off #6141*5 Alert settings*1 – Alert On/Off Off #6101*5 Al
Programming Sub-menu 1 Sub-menu 2 Settings Code Settings Auto connect*1 Off <1 min> 3 min 5 min 10 min #632 18 #633 20 Cell line only mode*1 On – #157 19 Cell line select Cellphone 1*4 Cellphone 2*4 #634 20 Set PIN*1 <0000> Cell area code*1 Main menu: #619 20 International code*1 – #117 45 Country code*1 – #118 Trunk prefix*1 – #119 “Set date & time” Sub-menu 1 Sub-menu 2 Memo alarm Alarm1–3 Time adjustment*1, *9 Main menu: Settings – Date and time*
Programming Main menu: “Settings” Sub-menu 1 Sub-menu 2 Settings Code Ring adjustments Ringer volume – Handset*3 Off–6 <6> #160 – Ringer volume – Base unit*1, *3 Off–6 <1> #G160 – Ringer tone*3, *7, *10 (Handset) #161 – Interrupt tone*11 Off #201 24 Silent mode On/Off – On – #238 40 Start/End – <11:00 PM/ 06:00 AM> #237 41 Select group Home Cell 1 Cell 2 Group 4-9 #241 41 Set date & time Talking caller ID 36 #101 16 Memo alarm – Alarm1–3 Once
Programming Sub-menu 1 Sub-menu 2 Settings Code Key detector setting*12 – 1:Add new device (for Detector1)*13 – 2:Add new device (for Detector2) – 3:Add new device (for Detector3) – 4:Add new device (for Detector4) Change name*1 Detector1 #6561 Detector2*14 #6562*14 Detector3*14 #6563*14 Detector4*14 #6564*14 Registration – #6571 – – #6572*14 #6573*14 #6574*14 Deregistration – #6581 – #6582*14 #6583*14 #6584*14 Call block*1 Block a single number – Block range of numbers – #217
Programming Sub-menu 1 Sub-menu 2 Settings Code Set tel line*3 Set dial mode*1 Pulse #120 16 Set flash time*1, *16 80 ms 90 ms 100 ms 110 ms 160 ms 200 ms 250 ms 300 ms 400 ms 600 ms <700 ms> 900 ms #121 23 Set line mode*1, *17 A #122 – Off #194 23 Call – sharing*1 Registration Change language Main menu: Register handset – #130 41 Deregistration*2 – #131 41 Display Español #110 16 Announcement*1 Español #112 16 “Customer support”
Programming *8 *9 *10 *11 *12 *13 *14 *15 *16 *17 The preset melodies in this product (“Tone 1” and “Tone 2”) are used with permission of © 2013 Copyrights Vision Inc. This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received. To turn this feature on, select “Caller ID auto”. To turn this feature off, select “Manual”. (Caller ID subscribers only) To use this feature, set the date and time first (page 16).
Programming Alarm An alarm sounds at the set time for 1 minute and is repeated 5 times at 5 minute intervals (snooze function). A text memo can also be displayed for the alarm. A total of 3 separate alarm times can be programmed for each handset. You can set one of 3 different alarm options (once, daily, or weekly) for each alarm time. Important: R Make sure the unit’s date and time setting is correct (page 16). 1 2 3 MMENUN#720 MbN: Select the desired alarm.
Programming 2 MbN: Select the desired setting. a MSAVEN R If you select “Off”, press MOFFN to exit. 3 Enter the desired hour and minute you wish to start this feature. 4 5 *: Select “AM” or “PM”. a MOKN 6 7 Displaying the handset name You can select whether or not the handset name is displayed in standby mode. The default setting is “Off”. 1 2 Enter the desired hour and minute you wish to end this feature. *: Select “AM” or “PM”. MSAVEN a MOFFN MMENUN#105 MbN: Select the desired setting.
Programming 1 MMENUN#131 R All handsets registered to the base unit are displayed. 2 MbN: Select the handset you want to cancel. a MSELECTN 3 MbN: “Yes” a MSELECTN a MOFFN 42 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1121_ver021.
Caller ID Service Using Caller ID service Important: R This unit is Caller ID compatible. To use Caller ID features, you must subscribe to a Caller ID service. Contact your phone service provider for details. Caller ID features When an outside call is being received, the caller information is displayed. Caller information for the last 50 callers is logged in the caller list from the most recent call to the oldest.
Caller ID Service – A specific line is set to make cellular calls (page 20). 5 MbN: Select the desired cellular phone. a MSELECTN n Using a landline 1 2 MCN CID 3 To call back, press M To exit, press MOFFN. Press MCN to search from the most recent call, or MDN to search from the oldest call. N. Note: R If the entry has already been viewed or answered, “ ” is displayed. or indicates the caller information R was received from the cellular line.
Using Bluetooth® Devices Copying phonebook from a cellular phone (phonebook transfer) You can copy phonebook entries from the paired cellular phones or other cellular phones (not paired) to the unit’s phonebook. A cellular phone must be compatible with Bluetooth wireless technology. Important: R Your cellular phone must support Phone Book Access Profile (PBAP) or Object Push Profile (OPP) specification. R If a copied entry has 2 or more phone numbers, each phone number (6 max.
Using Bluetooth® Devices – “Trunk prefix”: A trunk prefix; the initial digit(s) to be dialed in a domestic call, prior to the area code. 1 2 MMENUN To store “International code”: #117 To store “Country code”: #118 To store “Trunk prefix”: #119 3 Enter the desired number. a MSAVEN a MOFFN Note: R After you copy the entries, confirm that the numbers were transferred correctly.
Using Bluetooth® Devices – Handset: “Alert On/Off” must be turned on (page 47). R If this feature does not work, turn on your device’s Bluetooth feature, unplug the base unit’s AC adaptor, and then reconnect it. *1 Turning on [Application Alerts manager] Use the following procedure after installing the Link to Cell app. Android 2.x: Open your device’s [Settings] app. a Tap [Accessibility]. a Turn on the [Accessibility] and [Application Alerts manager] checkboxes. Android 4.
Using Bluetooth® Devices Remote voice assist For iPhone® and Android™ smartphone users You can use the handset to operate the voice recognition feature of a paired cellular phone (Siri®, Google Now™, or S Voice). For example, you can speak into the handset and command your cellular phone to make a call. Compatible voice recognition features R Google Now, S Voice (Android 4.0 or later) R Siri (iOS 8.0 or later) Important: R Your cellular phone must support the Hands Free Profile (HFP) specification.
Using Bluetooth® Devices Pairing a Bluetooth headset to the base unit Important: R Make sure that the Bluetooth headset is not connected to any other Bluetooth device. 1 Bluetooth headset: Set your headset to pairing mode. R Refer to the headset’s operating instructions. 2 Handset: MMENUN#621 3 If your headset PIN is “0000”, go to step 4. If your headset PIN is not “0000”, press MCLEARN, then enter your headset’s PIN. R Typically, default PIN is “0000”. Refer to the headset’s operating instructions.
Using Bluetooth® Devices n To switch to your headset: Press your headset’s button. Adjusting your headset receiver volume Base unit Press MjN or MkN repeatedly while using your headset. Note: R Depending on your headset, the receiver volume may not be adjustable. 50 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1121_ver021.
Answering System for Landline Answering system for landline The answering system can answer and record calls for you when you are unavailable to answer the phone. You can also set the unit to play a greeting message but not to record caller messages by selecting “Greeting only” as the recording time setting (page 55). Important: R Make sure the unit’s date and time setting is correct (page 16). Memory capacity (including your greeting message) The total recording capacity is about 18 minutes.
Answering System for Landline Resetting to a pre-recorded greeting message Use this procedure to erase your greeting message and use a pre-recorded one. 1 2 Press MERASEN 2 times while the unit is not in use. MMENUN#304 Using the handset MYESN a MOFFN When new messages have been recorded, “New message” is displayed. Playing back the greeting message 1 2 Erasing all messages MMENUN#303 To exit, press MOFFN.
Answering System for Landline Key Operation *6 Reset to a pre-recorded greeting message *1 If pressed within the first 5 seconds of a message, the previous message is played. To resume playback: MbN: “Playback” a MSELECTN You can also erase as follows: MPAUSEN a MbN: “Erase” a MSELECTN a MbN: “Yes” a MSELECTN *2 *3 Calling back (Caller ID subscribers only) n Using a landline: 1 Press MPAUSEN during playback. 2 MbN: “Call back” a MSELECTN n Using a cellular line: 1 Press MPAUSEN during playback.
Answering System for Landline Using the answering system remotely Key Operation *5 Erase all messages *# End remote operation (or hang up) 1 Dial your landline phone number from a touch-tone phone. 2 After the greeting message starts, enter your remote access code. *1 3 Follow the voice guidance prompts as necessary or control the unit using remote commands (page 54). *2 *3 4 When finished, hang up.
Answering System for Landline answers calls. You can select 2 to 7 rings, or “Toll saver”. The default setting is “4 rings”. “Toll saver”: The unit’s answering system answers at the end of the 2nd ring when new messages have been recorded, or at the end of the 5th ring when there are no new messages. If you call your phone from outside to listen to new messages (page 54), you know that there are no new messages when the phone rings for the 3rd time. You can then hang up without being charged for the call.
Useful Information Example: Voicemail service for landline In addition to your unit’s answering system you may also have voicemail service from your phone service provider. Voicemail is an answering service that may be offered by your phone service provider. This service can also record calls when you are unavailable to answer the phone or when your line is busy. Messages are recorded on the phone company system and not on the unit’s answering system.
Useful Information 2 3 Follow the pre-recorded instructions. AC adaptor cord and telephone line cord (B). 1 AC adaptor cord When finished, hang up. Note: R You can also use the MACCESSN soft key, if displayed, to play new voicemail messages. R If the handset still indicates there are new messages even after you have listened to all new messages, turn it off by pressing and holding # until the handset beeps.
Useful Information 4 Adjust the adaptor to hold the base unit, then push it in the direction of the arrow until it clicks into place. 5 Mount the unit on a wall then slide down to secure in place. 1 AC adaptor cord R This product is compliant with the following wall phone plate sizes (2 types). 2 83 mm (3 1/4 inches) 3 102 mm (4 inches) Fit the slots of the unit onto the corresponding wall phone plate tabs for (4) and (5) respectively. 1 4 5 4 2 58 3 5 For assistance, please visit http://shop.
Useful Information To remove the wall mounting adaptor While pushing down the release levers (A), remove the adaptor (B). A A B Charger Drive the screws (1) (not supplied) into the wall. 2 27.2 mm (1 1/16 inches) 2 1 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1121_ver021.
Useful Information Error messages Display message Cause/solution Ask phone company for VM access # R You have not stored the voicemail access number. Store the number (page 56). Busy R No cellular phone is paired to the base unit. Pair a cellular phone (page 17). R The called unit is in use. R Other units are in use and the system is busy. Try again later. R The handset you are using is too far from the base unit. Move closer and try again.
Useful Information Display message Cause/solution Main unit no power or No link. Reconnect base AC adaptor. R Confirm the base unit’s AC adaptor is connected to the unit and the power outlet correctly. R The handset has lost communication with the base unit. Move closer to the base unit and try again. R Unplug the base unit’s AC adaptor to reset the unit. Reconnect the adaptor and try again. R The handset’s registration may have been canceled. Re-register the handset (page 41).
Useful Information Problem Cause/solution I cannot pair a cellular phone to the base unit. R Depending on the compatibility of the cellular phone, you may not be able to pair it to the base unit. Confirm that your cellular phone supports the hands-free profile (HFP) specification. R Confirm that the Bluetooth feature of your cellular phone is turned on. You may need to turn this feature on depending on your cellular phone. R The Bluetooth technology on your cellular phone may not be functioning normally.
Useful Information Menu list Problem Cause/solution The display is in a language I cannot read. R Change the display language (page 16). I cannot register a handset to a base unit. R The maximum number of handsets (6) is already registered to the base unit. Cancel unused handset registrations from the base unit (page 41). Battery recharge Problem Cause/solution The handset beeps and/or flashes. R Battery charge is low. Fully charge the batteries (page 12).
Useful Information Problem Cause/solution I cannot make local calls with the handset using a cellular line. R You need to add your area code when making cellular calls. Store your area code in order to automatically add it to the beginning of the 7-digit phone number when making cellular calls (page 20). I cannot make or answer cellular calls with the handset.
Useful Information Problem Cause/solution Caller information is displayed or announced late. R Depending on your phone service provider, the unit may display or announce the caller’s information at the 2nd ring or later. R Move closer to the base unit. Caller information is not announced. R The ringer volume for landline is turned off. Adjust the ringer volume (page 36). R The ringer volume for cellular line is turned off. Adjust the ringer volume (page 34).
Useful Information Using Bluetooth devices Problem Cause/solution I cannot copy phonebook entries from a cellular phone. R Confirm that the cellular phone supports Bluetooth wireless technology. R Confirm that the cellular phone supports the Phone Book Access Profile (PBAP) or Object Push Profile (OPP) specification. R If the cellular phone is already connected to another Bluetooth device such as a Bluetooth headset, turn it off or disconnect it from the cellular phone.
Useful Information Problem Cause/solution App alert is not displayed or announced. or Text message alert is not displayed or announced. R Confirm that the cellular phone supports the Message Access Profile (MAP) specification to use text message alert feature. R Confirm that the cellular phone supports the Serial Port Profile (SPP) specification to use App alert feature. R Confirm that the [Application Alerts manager] setting of your Android phone is turned on. R “Alert On/Off” is set to “Off”.
Useful Information Answering system Problem Cause/solution The unit does not record new messages. R The answering system is turned off. Turn it on (page 51). R The answering system does not answer or record calls from cellular lines. R The message memory is full. Erase unnecessary messages (page 52, 52). R The recording time is set to “Greeting only”. Change the setting (page 55).
Useful Information Voicemail Problem Cause/solution “Voicemail msg. via phone co.” is shown on the handset display. How do I remove this message from the display? R This notification is displayed when your phone service provider’s voicemail service (not the unit’s answering system) has recorded a message for you. Typically you can remove this notification from the display by listening to the message.
Useful Information FCC and other information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ----------. If requested, this number must be provided to the telephone company. L Registration No.............(found on the bottom of the unit) L Ringer Equivalence No. (REN).......0.
Useful Information manufacturer about the availability of Hearing Aids which provide adequate shielding to RF energy commonly emitted by digital devices. WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS TO EMERGENCY NUMBERS: 1) Remain on the line and briefly explain to the dispatcher the reason for the call. 2) Perform such activities in the off-peak hours, such as early morning or late evenings. This device complies with Part 15 of the FCC Rules.
Useful Information Compliance with TIA-1083 standard: Telephone handsets identified with this logo have reduced noise and interference when used with T-Coil equipped hearing aids and cochlear implants. Compatible with Hearing Aid T-Coil T TIA-1083 72 For assistance, please visit http://shop.panasonic.com/support TGD56x(en)_1121_ver021.
Guía Rápida Española Guía Rápida Española Conexiones Unidad base 1 Conecte el adaptador de corriente alterna a la unidad presionándolo firmemente. 2 Conecte el adaptador de corriente alterna a la toma de corriente. 3 Conecte el cable de la línea telefónica a la unidad, y después a la toma telefónica de una sola línea (RJ11C) hasta que escuche un clic. 4 Se requiere un filtro DSL/ADSL (no incluido) si tiene este tipo de servicio.
Guía Rápida Española Instalación y carga de la batería Cargue aproximadamente durante 7 horas. 4 2 3 2 1 1 Nota: L UTILICE SOLO baterías recargables de Ni-MH tamaño AAA (R03) ( 1 ). L NO utilice baterías alcalinas, de manganeso ni de Ni-Cd. L Confirme que las polaridades estén correctas (S, T). L Cambie el idioma de la pantalla. L Confirme que aparezca “Cargando” ( 2 ).
Guía Rápida Española Cambio de idiomas (Auricular) (predeterminado: “English”) Cuando instale las baterías por primera vez, es posible que aparezca “Set date/time Press SELECT”. Oprima {OFF} para salir. Idioma de la pantalla {MENU}(11) s {r}: “Español” s {GUARDAR} s {OFF} Idioma de anuncio de voz {MENU}(112 s {r}: “Español” s {GUARDAR} s {OFF} Fecha y hora (Auricular) 1 2 3 4 {MENU}(1)1 Introduzca el día, mes y año actuales. s {OK} Introduzca la hora y minuto actuales (formato de reloj de 24 horas).
Guía Rápida Española Enlace a celular Cómo emparejar un teléfono celular con Bluetooth 1 Unidad base: Oprima y mantenga oprimido {CELL 1} o {CELL 2} durante aproximadamente 5 segundos. L Después de que el indicador de CELL correspondiente comienza a parpadear en la unidad base, el resto del procedimiento debe completarse en menos de 5 minutos.
Guía Rápida Española Enlace a celular Cómo conectar o desconectar el teléfono celular (Auricular) Conexión automática a los dispositivos con Bluetooth (teléfonos celulares) La unidad se conecta a los dispositivos Bluetooth a intervalos regulares si se pierde la conexión. Consulte las instrucciones de operación para cambiar el intervalo (predeterminado: “1 min”).
Guía Rápida Española Operaciones básicas Cómo hacer y contestar llamadas (Auricular) Para hacer llamadas de celular 1 2 Marque el número telefónico. s {CEL.} L Cuando el modo exclusivo para la línea celular está configurado, también puede oprimir {C}/{s} en lugar de {CEL.}. L Cuando solo hay 1 teléfono celular emparejado, la unidad comienza a marcar. Cuando hay 2 teléfonos celulares emparejados: {r}: Seleccione el teléfono celular deseado. s {SELEC.
Guía Rápida Española Operaciones básicas Directorio telefónico (Auricular) 1 2 3 4 Para añadir entradas {<} k s {MENU} {r}: “Agregar Ent. Nueva” s {SELEC.} Introduzca el nombre de la persona (máx. 16 caracteres). s {OK} Introduzca el número telefónico de la persona (máx. 24 dígitos). s {OK} 5 {r}: Seleccione el grupo deseado. s {SELEC.} 2 veces s {OFF} L En el paso 3, puede cambiar el idioma de introducción de caracteres. ( s {r}: Seleccione el idioma deseado.
Guía Rápida Española Cómo usar dispositivos Bluetooth Copiado de entradas del directorio telefónico desde un teléfono celular con Bluetooth (transferencia del directorio telefónico) Puede copiar entradas del directorio telefónico desde los teléfonos celulares emparejados o desde otros teléfonos celulares (no emparejados) al directorio telefónico de la unidad. 1 Auricular: {MENU}(618 2 Auricular: Para copiar desde teléfonos celulares emparejados: {r}: Seleccione el teléfono celular deseado. s {SELEC.
Guía Rápida Española Cómo usar dispositivos Bluetooth Cómo usar un audífono Bluetooth (opcional) Al emparejar un audífono Bluetooth con la unidad base, podrá tener conversaciones a manos libres para llamadas terrestres. L Solo se pueden usar 2 dispositivos Bluetooth con la unidad al mismo tiempo (por ejemplo, 2 líneas celulares o el audífono y 1 línea celular*1). *1 No es posible usar un audífono Bluetooth para hablar en una línea celular.
Guía Rápida Española Preguntas frecuentes Pregunta Causa y solución ¿Por qué aparece _? L El auricular está demasiado lejos de la unidad base. Acérquelo. L El adaptador para corriente de la unidad base no está conectado correctamente. Conecte de nuevo el adaptador para corriente a la unidad base. L El auricular no está registrado en la unidad base. Regístrelo. 1 Auricular: {MENU}(13) 2 Unidad base: Oprima y mantenga oprimido {LOCATOR} durante aproximadamente 5 segundos.
Appendix Customer services Shop Accessories! for all your Panasonic gear Go to hp://shop.panasonic.com/support Get everything you need to get the most out of your Panasonic products Accessories & Parts for your Camera, Phone, A/V products, TV, Computers & Networking, Personal Care, Home Appliances, Headphones, Baeries, Backup Chargers & more… Customer Services Directory For Product Informa!on, Opera!ng Assistance, Parts, Owner’s Manuals, Dealer and Service info go to hp://shop.panasonic.
Appendix Limited Warranty (ONLY FOR U.S.A.
Appendix Limited Warranty Limits and Exclusions This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage.
Index Index E # A F G H B C D 3-way conference: 23 Additional handset: 41 Alarm: 40 Answering calls: 22 Answering system Call screening: 54 Erasing messages: 52, 53, 54 Greeting message: 51 Greeting only: 55 Listening to messages: 52, 54 Number of rings: 54 Recording time: 55 Remote access code: 53 Remote operation: 53 Ring count: 54 Toll saver: 54 Turning on/off: 51 Assist button: 14 Auto talk: 22, 37 Battery: 11, 12 Bluetooth wireless technology Cellular phone (Link to cell): 17 Headset: 48 Phoneb
Index W Voice announcement language: 16 Voicemail: 56 Volume Receiver: 21 Ringer (Base unit): 22, 34, 36 Ringer (Handset): 22, 34, 36 Speaker: 21 Wall mounting: 57 87 TGD56x(en)_1121_ver021.
IMPORTANT! If your product is not working properly. . . 1 Reconnect AC adaptor to the base unit. 2 Check if telephone line cord is connected. 3 Use rechargeable Ni-MH batteries. (Alkaline/Manganese/Ni-Cd batteries CANNOT be used.) 4 Read troubleshooting page in the Operating Instructions. Visit our Web site: http://shop.panasonic.com/support L FAQ and troubleshooting hints are available.
