3 Manage Folders or Music Files m Data box MUSIC 1 Music Folder list Music 2 Select an item. MUSIC Player. . . MUSIC Player starts. (See page 275) i-mode. . . . . . . . . Displays the i-mode (Chaku-uta Full®) Folder list. Select a folder. WMA . . . . . . . . . . Displays the WMA list. Each time you press m from the i-mode (Chaku-uta Full®) Folder list, you can switch between the folders in the FOMA terminal and the microSD card.
■Operations of MUSIC Player in use Operation Halt Key operation l( ) Oo( Pause Oo( ) or p to play back ) or p Oo( ) or p to play back Sound volume adjustment Bo or Replay next file Vo or > (for at least one second) Replay previous file Co or < (for at least one second) When playback time is over three seconds, no previous music file is found, and “Random” or “Random play&repeat” is set, you go back to the beginning of the file. Search (fast forward)※ Press and hold Vo.
■Icons on the Music list When you select a music file from “MUSIC→MUSIC Player”, the following icons are displayed: Icon Description All Chaku-uta Full® music files are set with file restrictions. See page 240 for file restrictions. Icon ※ Stored in the FOMA terminal Acquired source Sites ※For the copyrighted file movable to the microSD card, “ ” is displayed.
Information In the following cases, the playback pauses and resumes after you finish each operation: ･ When you make/receive a voice call, videophone call, or PushTalk call ･ When you receive a mail message or Message R/F while “Receiving display” is set to “Alarm preferred” or the Stand-by display is shown ･ When an alarm of “Alarm”, “Schedule”, “ToDo”, “TV timer” or “Timer recording” sounds Depending on the event which occurred, the confirmation display might appear asking whether to end MUSIC Player.
Select storage You can set the destination folder for when you move the Chaku-uta Full® music file to the microSD card. You can set it for up to seventh-tier-level folders. YES Memory info You can display the used memory space (estimate)/number of stored items. You can display them also by pressing c( ). Point ring tone Music info You can display the title, artist name, playback time, etc.
Move to phone You can move the Chaku-uta Full® music file on the microSD card to the FOMA terminal. (See page 366) Edit title You can edit the title of Chaku-uta Full® music file. Enter a title. For a Chaku-uta Full® music file in the FOMA terminal, you can enter up to 9 full-pitch/18 half-pitch characters. For a Chaku-uta Full® music file on the microSD card, you can enter up to 18 full-pitch/36 half-pitch characters.
Function Menu during Playback/Pause/Halt Player menu Play mode setting You can show the Player Menu display from the playback display during using MUSIC Player. Playback state continues even when you show the Player Menu display. See page 279. Music Sound effect Remaster You can bring the sound from an earphone or Bluetooth device to the original sound by complementing high-pitch range lost at data compression.
Using Playlist You can create the list of music files you want to listen to, and play them back in the order you like. You can play back using the playlists created by the FOMA terminal or Windows Media Player, or the SD-Audio playlists created by SD-Jukebox.
Music Function Menu of the Playlist List Player menu You can show the Player Menu display. Play mode setting See page 279. Create playlist See page 283. Copy playlist Enter a playlist name. You can enter up to 18 full-pitch/36 half-pitch characters. When you copy the SD-Audio playlist or WMA playlist, it is copied to the FOMA terminal as the FOMA playlist. Edit playlist name You can edit the name of the FOMA playlist. Edit the playlist name.
i-αppli/i-Widget i-αppli . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Downloading i-αppli from Sites . . . . . . . . . Starting i-αppli . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting i-αppli . . . . . . . . . . . . . . . . . . . . . . . . Starting i-αppli Automatically . . . . . . . . . . . . . . . . . . . . . . . . . . . Using i-αppli Call . . . . . . . . . . . . . . . . . . . . . . . . . . . .
i-αppli “i-αppli” is a software program for i-mode mobile phones. You can use your FOMA terminal more conveniently by downloading※ various software programs from the i-mode site. For example, you can automatically update the stock price information or weather information, and enjoy games without accessing network.
Information Display Software Info You can display software information when downloading i-αppli. 1 m i-αppli iαppli settings Disp. software info Display or Not display Starting i-αppli 1 i(for at least one second) Select a software program to be started. On the Software list, the icons show the types of i-αppli programs and supported functions.
When you select a partially saved i-αppli program, you can download the remaining part of it. “ ” or “ ” is displayed while an i-αppli program is running. To end i-αppli, press and hold r for at least one second or press h; then select “YES”. The software program you started last time comes at the top of the list. You cannot manually change the order of software programs. See page 205 when you select “Search by i-mode”.
Use Bar Code Reader You can use the camera to scan JAN codes, QR codes, and CODE 128 depending on the software program. When you start Bar Code Reader while an i-αppli program is running, the camera (Bar Code Reader) starts up. Put the code to be scanned within the guide frame and shoot. You need to download CODE 128 compatible i-αppli program to scan CODE 128. The scanned data file is used/saved by the i-αppli program. Trace Information You can check the details when a software program malfunctions.
Stand-by set See page 304. Upgrade Network set You can set whether to communicate while an i-αppli program is running. ON or OFF l( ) Set desktop/ Stand-by net See page 305. Icon info You can set whether to permit the i-αppli program to use information of icons indicating i-mode mail, SMS messages, Messages R/F, battery level, Manner Mode, and within/out-of service area. ON or OFF l( ) i-αppli/i-Widget Change mld./img.
When you delete mail-linked i-αppli The confirmation display appears asking whether to delete the i-αppli mail folder as well. If you do not delete it, you can check the text of mail from the Outbox/Inbox list. YES . . . . . . Deletes both the software program and the i-αppli mail folder. NO. . . . . . . Deletes the software program only and the i-αppli mail folder is left. Cancel . . . . Does not delete both the software program and i-αppli mail folder; the former display returns.
レイトン教授と悪魔の箱 (Professor Layton and Pandora’s Box) スーパーパズルボブル (SUPER PUZZLE BOBBLE) Aim at a target by the key to shoot bubbles. Connect three bubbles of the same color to erase them. The rule is simple, so even a beginner can enjoy this puzzle game. Enjoyable two modes are prepared; “ぱずるもーど (Puzzle mode)” with 100 stages in total and “とことんもーど (Challenge mode)” in which you erase bubbles thoroughly. This is a fantasy adventure game.
5 日英版／日中版 しゃべって翻訳 for P (J-E/J-C Speech Translation for P) Just by speaking a phrase to be translated into your FOMA terminal, this application program translates it from Japanese to English or Chinese and vice versa. You can use all the functions charge free for 60 days from when you start using this application program. Some phrases available for translation are restricted on and after the 61st day.
About TV timer function You can set 1Seg TV Timer for programs you want to watch by selecting from the program list of this application program. How to set TV Timer 1. Software list Gガイド番組表リモコン (G Guide Program List Remote Control) Highlight a program you want set TV Timer for and press i( ) 視聴予約 (TV Timer) 予約実行 (Execute booking) Operate following the instructions on the display.
For service contents and details of subscriptions, refer to the i-mode site of DCMX (in Japanese only). ・i-mode site: iMenu→DCMX iD DCMXクレジットアプリ (DCMX credit appli) “DCMX” is a credit service that supports “iD” and offered by NTT DOCOMO, INC. DCMX provides DCMX mini that enables you to use up to ¥10,000 per month and respective DCMX/ DCMX GOLD services that enable you to use more amount and save up DOCOMO points.
モバイルGoogleマップ (Google Map for Mobile) On the map, you can easily find out area information, shop information, and the contents created by users. You can switch to the aerial photo mode or view the map by Street View. You can also check the transportation to the destination by the line search and navigate yourself to the destination. © 2009 Google - Map data © 2009 ZENRIN ■About the Map display l: Displays the menu. i-αppli/i-Widget i: Searches.
ｉアバターメーカー (i-Avatar Maker) ファミリー伝言板 (Family Message Board) What you can do with i-Avatar Maker ■Create avatars You can easily create avatars by using various parts prepared by i-Avatar Maker. You can create avatars viewing the images shot by the camera or stored in Data Box, or can create avatars based on the prepared samples. ■Use avatars You can use the created avatars by converting to the materials for Deco-mail, Deco-mail pictograms, Decome-Anime, or the Machi-chara images which support i-concier.
時刻表ウィジェット (Timetable Widget) With this Widget Appli program, you can download the timetable and check the countdown of minutes/seconds until the train’s departure. The schedule registration function is also provided to notify you of the departure time by sounding an alarm. You can update the timetable from the menu, and search for the nearest station using the GPS function. You are separately charged a packet communication fee. For details, refer to “ヘルプ (Help)” in the menu.
地図アプリ (Map Application) Start! ｉウィジェット (Start! i-Widget) This is a convenient i-αppli program that enables you to read the map of the place you are currently in or you specify, check area information, or navigate yourself to the destination by using the location information. You can search for information of facilities which are useful in a time of disaster. Further, using Chizu Talk function, you can exchange messages with your friends on the map. See page 323 for details on operations.
Start the application Select a coupon and the number of sheets you use Press “決定 (OK)” to complete the setting of coupon information Order by placing the coupon over a scanning device at a shop. i-αppli/i-Widget © Millmo Inc. 付箋 (Sticky) Sticky is a Widget Appli program that enables you to easily create, edit, and browse sticky notes. You can store up to 300 characters, up to 50 items. You can change colors and display positions of sticky notes.
Googleモバイル (Google Mobile) “Googleモバイル (Google Mobile)” is a useful application program that enables you to use the mobile web search function. You can easily enter the trendy words and keywords you entered in the past. You can easily call up the helpful Google services such as Mail Service (Gmail) and Train Route Search. You are separately charged a packet communication fee. ※The display is for reference. The actual one may differ. i-Widget sound effect iαppli call DL set. See page 304.
Auto Start Info Starting i-αppli Automatically You can make an i-αppli program start automatically at the set date and time. Set the date and time for automatic start using Auto Start Time. Auto Start Setting 1 You can set whether to enable automatic start of i-αppli programs. 1 m i-αppli iαppli settings Auto start setting ON or OFF Auto Start Time i-αppli/i-Widget You can set the date and time for automatic start. You can set for up to three software programs.
Send i-αppli Calls to Call up Members While an i-αppli program which supports i-αppli call is running Make an i-αppli call YES 1 The operation differs depending on the i-αppli program. Receive i-αppli Calls When an i-αppli call comes in, the i-αppli call ring tone sounds and the confirmation display appears asking whether to answer it. 1 Check i-αppli Call Logs Up to 30 received i-αppli calls are recorded in i-αppli call logs, and you can check how they were replied.
i-αppli Call Download Setting You can set whether to reject the i-αppli download notice for when a target i-αppli program for i-αppli calls is not found. 1 m i-αppli iαppli settings iαppli call settings iαppli call DL set. Reject or Not reject i-αppli Call Sound You can set the operation for when an i-αppli call is received. i-αppli/i-Widget 1 m i-αppli iαppli settings iαppli call settings iαppli call sound Do the following operations. Select ring tone Select a folder Select a ring tone.
Information When you show the Stand-by display while a menu function is operating, the image set for “Stand-by display” of “Display setting” is displayed, even when the i-αppli Stand-by display is set. When the communication is extremely frequent in a certain period of time while an i-αppli program is running as the i-αppli Stand-by display, the confirmation display appears. When you press .<, the confirmation display appears asking whether to continue communication.
i-Widget Using i-Widget i-Widget is a useful function that enables you to access the frequently-used contents such as the calculator, clock, and stock price information (Widget Appli) by pressing the i-Widget key (r). You can add Widget Appli programs by downloading from sites offered by IPs (Information Providers). (See page 286) Also, you can paste multiple (up to eight) Widget Appli programs to the i-Widget display to customize it to your taste.
■About i-Widget display End i-Widget You can end i-Widget to return to the Stand-by display. 1 Widget Appli list/i-Widget display/Widget Appli operation display h You can return to the Stand-by display also by pressing r or m[戻る (Return)] from the i-Widget display. For the Widget Appli operation display, the confirmation display appears asking whether to finish it.
Starting Widget Appli 1 Widget Appli list Select a Widget Appli program to be started. You can show the Widget Appli operation display. You can start a Widget Appli program also by selecting it from the Software list. You can show the Widget Appli operation display also by selecting a running Widget Appli program. You can show the i-Widget display by pressing r or m[戻る (Return)] from the Widget Appli operation display.
Osaifu-Keitai/ToruCa Osaifu-Keitai . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iC Transfer Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Starting Osaifu-Keitai Compatible i-αppli . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Locking IC Card Function . . . . . . . . . . . . . . . . . Checking Owner Information of IC Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Osaifu-Keitai Osaifu-Keitai/ToruCa Osaifu-Keitai mounts the IC card, so you can make payment and others just by placing the FOMA terminal over the scanning device in a shop. Further, you can use communications to deposit electronic money or to check your account for balance or usage histories. Security is fully secure※1 so that you can make use with a sense of security. For details on Osaifu-Keitai, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.
Starting Osaifu-Keitai Compatible i-αppli Read and Write Data inside the IC Card You can start the Osaifu-Keitai compatible i-αppli from the Software list. By using Osaifu-Keitai compatible i-αppli, you can read/write the data inside the IC card and use convenient functions such as depositing electronic money or checking your account for the balance and usage details on the mobile phone. Take care of your Terminal Security Code and password used for each service not to reveal to anyone.
Locking IC Card Function Checking Owner Information of IC Card To prevent the IC card function from being used by others, you can set the Osaifu-Keitai, received ToruCa, or iC communication disabled. You can check whether IC owner information required for using the IC card is consistent with the information of the currently inserted UIM. If the battery runs out while IC Card Lock is set, the IC card stays locked. 1 1 Press and hold m for at least one second.
■Flow for using ToruCa Receiving ToruCa Receive from Scanning Device Place your Osaifu-Keitai over a scanning device to receive a ToruCa file. You can receive the ToruCa file from a scanning device using the IC card function. By receiving detailed information, a ToruCa file becomes a ToruCa file (details) which has more pieces of information.
About Auto-reading Function of ToruCa If you set “Auto reading ToruCa” to “Accept” to use the ToruCa files by placing the FOMA terminal over the scanning device, the available ToruCa files are automatically recognized. The used ToruCa files are converted into “Used” and then moved to the “Used ToruCa” folder. Up to 20 used ToruCa files are saved, and when the number of the files exceeds 20, the files are deleted from the one downloaded at the oldest date.
Search all folders Auto-sort You can search through all ToruCa files in the FOMA terminal (except ToruCa files stored in the “Used ToruCa” folder) by specifying a search condition. Select a search condition. Genre. . . .Select a genre. Press l( ) to display a list of category icons belonging to the genre. Title . . . . .Enter characters to be searched for, from those in the title. Index . . . .Enter characters to be searched for, from those in location data.
Information “ ” is displayed when the Genre sort is set, “ ” is displayed when the Title sort is set, and “ ” is displayed when the Index sort is set. When a file satisfies multiple conditions, it is sorted into the top of the folder in the ToruCa Folder list. The ToruCa file (details) is copied as a ToruCa file before receiving details if it contains the data file with the UIM security or whose output from the FOMA terminal is prohibited.
Function Menu of the ToruCa File List/Detailed ToruCa File Display Attach to mail Move You can compose an i-mode mail message with the ToruCa file attached. Go to step 2 on page 142. You can compose it also by pressing l( ). Connect to Center [List only] See page 137. ToruCa folders [List only] You can display the ToruCa folder list. You can display it also by pressing c( Multiple-choice [List only] You can select multiple ToruCa files and operate them.
Retry You can play back an animation image or Flash movie in the [Detailed display only] ToruCa file from the beginning. When a part of the Flash movie is outside the display area, the Flash movie might not be played back. Add to phonebook [Detailed display only] See page 92. Add desktop icon See page 31. Ir/ transmission Send Ir data transmission Memory info [List only] See page 377. See page 379. You can display the used memory space (estimate)/the number of saved files.
Setting ToruCa 1 m Osaifu-Keitai Settings Do the following operations. You can set whether to receive ToruCa file from a scanning device using the IC card function or from another FOMA terminal via iC transmission. Accept or Reject Auto reading ToruCa You can set whether to have the available ToruCa files automatically recognized for when you place the FOMA terminal over the scanning device. Accept or Reject Recv.
320
Map/GPS Function Using GPS Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Checking Your Location . . . . . . . . . . . . . . Using Map/GPS Compatible i-αppli . . . . . . . . . . . . . . . . . . . . . . Providing Location Information on Request . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Notifying Location Information. . . . . . . . . Displaying History of Checked Location Information . . . . .
Using GPS Function GPS is operated by the United States Department of Defense, so the GPS radio wave conditions might be controlled (accuracy deterioration, radio wave supply suspension, etc.) depending on the defense strategy of the United States Department of Defense.
Function Menu while Current Location is Displayed Read map You can display a map by starting GPS compatible i-αppli program set by “Select map”. Map/GPS αppli You can use the location information on a GPS compatible i-αppli program. Select an i-αppli program. Paste to mail You can compose an i-mode mail message with the URL of the location information pasted to the text. YES Go to step 2 on page 142. The URL of the location information to be sent is displayed on i-mode compatible phones only.
■About Service Charge The services provided by this application are classified as follows: Charge-free functions Map viewing and area information search are available. Gourmet-coupon search is also available. On the map, you can color the places for which you previously measured by using GPS, by the unit of city, ward, town, village, or prefecture. This function shows the visited places at a glance.
Information Notifying Location Information You can notify a service provider of your current location. 1 m LifeKit Map/GPS Notify of location Direct input Enter a party to be notified YES You can enter up to 12 digits by using numerals, # and :. If you have stored LCS clients by “Reg. LCS client” beforehand, you can select an LCS client from “View service clients”. You can press l( ) to stop measuring, but your current location might be notified depending on the timing.
Add to phonebook You can store the location information, phone number, or mail address in the Phonebook. Store loc. info., Store phone number, or Store mail address YES Go to step 2 on page 92. Attach to image See page 323. Compose message You can compose an i-mode mail message to your location provision requester. Go to step 3 on page 142. Dialing See page 242.
GPS button setting You can set a function which is performed after measuring your location by pressing and holding 1 for at least one second from the Stand-by display. You can select a function from the “Function Menu while Current Location is Displayed” on page 323. Select a function. If you set to “Confirm every session”, you can select a function each time you measure the location. Posit. tone/illum. See page 327.
Information Register LCS Client If you have stored LCS clients, you can select an LCS client when you notify of your current location. Further, you can automatically notify of your current location when you make a call to the stored phone number. You can store up to five LCS clients. 1 m LifeKit Map/GPS GPS settings Reg. LCS client Highlight and press l( ) or Oo( ) Do the following operations.
2 Select “YES” to set a validity period Do the following operations. ■Operations when the validity period for location provision is specified Example: When the current date and time are 12:00/18/Nov and you set 14:00 as the start time and 21:00 as the end time Permit from Enter the time for starting permission. Permit to Enter the time for ending permission. 1 time Repeat Select a repeat type. When you select “Select day”, put a check mark for days of the week to be repeated, then press l( ).
Example: When the current date and time are 12:00/18/Nov and you set 14:00 as the start time and 10:00 as the end time Repeat Validity period Select day You can use this setting for changing the host for Service Settings.
Data Management Data Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 332 Making Full Use of Still Images Displaying Images . . . . . . . . . . . . . . . . . . . . . 334 Editing Still Images. . . . . . . . . . . . . . . . . . . . . . . . 339 Creating Animations. . . . . . . . . . . . . . . . 341 Making Full Use of Moving Pictures Playing i-motion/Movie. . . . 342 Using Playlist .
MUSIC i-mode Data Box Data Box contains the items and folders as listed below. Data is saved to respective folders according to the contents.
Voice announce Playlist Search by i-mode microSD Melody Movable contents My documents i-mode microSD My documents Data files recorded by using “Voice announce” Playback of playlist Connects to the data site. Melodies copied from the FOMA terminal Copyrighted melodies moved from the FOMA terminal Pre-installed or downloaded PDF files PDF files downloaded or copied from the FOMA terminal Copyrighted PDF files moved from the FOMA terminal ※1 The folder names can be changed by “Edit folder name”.
Data Management Icon Type File format PDF Damaged PDF file PDF Attach to i-mode mail Kisekae Tool file — Insert images into Deco-mail, or create Decome-Anime messages Partially saved Kisekae Tool file — Set display Machi-chara image — Partially saved Machi-chara image — Chara-den image — Word file WORD Excel file EXCEL PowerPoint file POWERPOINT Incompatible file — ※For the video recorded by the device other than this FOMA terminal, the icon for already viewed video is displayed.
Display Images Recorded by 1Seg 1 m Data box 1Seg Image Select a file. Function Menu of the Still Image List Edit picture See page 339. Edit title Enter a title. For a file in the FOMA terminal, you can enter up to 9 full-pitch/18 half-pitch characters. For a file on the microSD card, you can enter up to 18 full-pitch/36 half-pitch characters. ■Operations when playing back still images See page 338 for when you operate from the Function menu.
Attach loc. info Select an item. By position loc. . . . Measures the current location (see page 322) and stores the location information. After checking the location information, press Oo( ). From loc. history . . . Select a piece of location information from Location History (see page 326) and store it. From phonebook . . . Select a Phonebook entry which contains the location information for storing. From own number . . . Stores the location information from “Own number”.
Move You can move the still image, i-motion file, movie file, PDF file, document file, Kisekae Tool file, Machi-chara image, or SD other file to another folder. Select a destination folder. Press l( ) to display folders at the second-tier level or lower, if they exist. Press r to return to the upper level. YES Delete all You can delete all files in the folder. Enter your Terminal Security Code YES Multiple-choice You can select multiple files and operate them.
Data Management Information Send Ir data You may not be able to edit the file name depending on the file. You cannot use half-pitch space for the file name. You may not be able to set the file restrictions depending on the file. Flash movies are not displayed. The time interval to show the images might differ depending on the image. If a call comes in while copying/moving multiple files, copying/moving is canceled even midway.
Information When you select “Edit picture” while playing back a still image whose display direction is switched, it returns to the original direction. You cannot edit some still images, or you might have difficulty to produce editing effect. If you repeat editing image, the image quality may deteriorate or the file size may become larger. You may not be able to edit some still images after their sizes are changed.
Frame Data Management Character stamp Select a frame Oo( ) You can add the frame whose size is the same as the size of the image you are editing. You can display the previous or next frame by pressing No. Press and hold No for at least one second to display sequentially. You can rotate the frame by pressing i( ) and selecting “180° rotation”. You can reselect a frame by pressing l( ). Trim away You can add text. Enter characters. You can enter up to 15 full-pitch/30 half-pitch characters.
Information You cannot enlarge a marker stamp to the size larger than the still image you are editing. You cannot edit the still image smaller than 24 x 24 dots. You cannot set some font colors depending on the image to be edited. In that case, select another color. You cannot edit the still image of Chat Picture (80 x 80) or smaller. Set display See page 335. Picture info See page 335.
The following images are displayed when you cannot display a preview image. Playing i-motion/Movie You can play back the i-motion files stored in the FOMA terminal or microSD card, or the moving pictures published on the Internet for personal computers (movie files). You can play back the sound of i-motion/movie files in stereo sound by connecting to the Stereo Earphone Set (option). Also, you can play back programs wirelessly by using a commercial Bluetooth device.
Operation Key operation Change vertical disp./ horizontal disp./ full disp.※3※4 c( ) Each time of pressing switches display formats. Remaster 9 Each time of pressing switches between “ON” and “OFF”. Listening 8 Each time of pressing switches in order of “OFF” → “Surround” → “Natur1” → “Natur2”. Equalizer 7 Each time of pressing switches in order of “Normal” → “H.BASS1” → “H.BASS2” → “Train”.
When you select “Position memory” of “imotion” or “Movie” from the folder list Data Management The display for selecting a position memory appears. For i-motion files, you can select “Marker to resume” or “Position memory 1/2”. For movie files, you can select “Marker to resume” or “Position memory 1 through 9”. When you select “Marker to resume” or “Position memory”, the i-motion/movie file is played back from the stored position.
Copy to microSD See page 364. Copy to phone See page 365. Move to microSD See page 366. Move to phone See page 366. Contents info You can display the title, file name and others of the movie file. Move See page 337. You can display the used memory space (estimate)/number of stored items. Sort See page 337. Listing You can change the displayed contents on the i-motion list/ Movie list. You can select whether to display the titles or file names on the microSD Card list.
Data Management Function Menu during Pause/at the End of Playback Normal play The i-motion file is played back at the normal speed. Chapter list You can display the list of chapters stored in the i-motion file and select a chapter to be played back. Select a chapter to be played back. Slow The i-motion file is played back mute at half the normal speed. To cancel Slow playback, press l( ) or perform “Normal play”. Quick View (1.25x) The i-motion file is played back at the speed 1.
Copy URL Display size Change to full You can copy the URL of a movie file published on the Internet during playback. You can copy up to 512 half-pitch characters for the URL. You can set whether to display an i-motion/movie file in the original size (Actual size) or to fit to the display size. Actual size or Fit in display Even if you set to “Actual size”, the i-motion/movie file in excess of the display size is reduced to the display size.
Play Back Playlist Playlist list Highlight a playlist and press l( 1 ). Function Menu of the Playlist List i( ) Edit the i-motion file. See page 349 for the operation. Press Oo( ). Not to save the edited i-motion file, press r or h; then select “YES”. YES See page 206 when i-motion files are stored to the maximum. Play See page 348. Edit playlist You can edit the playlist. Go to step 2 on page 347.
Function Menu of the Edit imotion Display Trim imotion You can cut out a certain range from an i-motion file. Use Vo to display a start frame l( ) The start frame is set and the i-motion file is played back. Press Oo( ) at the position you want to cut out. Playing back the i-motion file pauses. Trim for picture See page 336. Information If you execute “Trim imotion”, the file size may become larger.
Operation
When you select “Position memory” from the Folder list for videos The display for selecting Position Memory appears. When you select “Marker to resume” or “Position memory 1/2”, the video is played back from the stored position. Marker to resume This is stored automatically when a call comes in, an alarm operates, or the battery goes flat during playback of a video. Position memory You can store in any optional position in a video, and create up to two position memories.
Switch display Data Management Function Menu during Pause/at the End of Playback Normal play The video is played at the normal speed. Slow The video is played back mute at half the normal speed. To cancel Slow play, perform “Normal play”. Quick View The video is played back quickly. Select an item. 1.25x . . . . . . . . . . . . The video is played back at the speed 1.25 times the normal speed. 2x . . . . . . . . . . . . . . . The video is played back at twice the normal speed. Summary View. . . .
Sound setting See page 263. Reset settings See page 263. Back to data BC You can stop browsing the data broadcasting site and return to the data broadcasting. Information You cannot execute Quick View for some video files. It may be hard to hear sound during Quick View. Depending on the video file, you might not be able to select the position to play.
Data Management Function Menu of the Chara-den List Function Menu of the Chara-den Display Chara-den call See page 72. Chara-den call See page 72. Substitute image See page 72. Substitute image See page 72. Rec. Chara-den See page 354. Rec. Chara-den See page 354. Edit title Enter a title. You can enter up to 18 full-pitch/36 half-pitch characters. Add desktop icon See page 31. Action list You can display the list of actions you can operate.
Shoot Still Images Display “ ” on the Chara-den Recording display and press Oo( ). 1 A still image of the displayed Chara-den image is shot. While “ ” is displayed, press c( ) to display “ 2 Press Oo( You can set the image size for recording and saving a still Chara-den image. You can set only in Photo Mode. QCIF (176 x 144) or Small (117 x 96) Recording type You can set whether to record video or voice for recording and saving a Chara-den movie. You can set only in Movie Mode.
Function Menu of the Machi-chara List Edit title See page 335. Preview You can display the Machi-chara image. Data Management Set to Machi-chara You can set a Machi-chara image. (See page 115) You can set it also by pressing l( ). You cannot set Machi-chara images on the microSD card. RLS Machi-chara You can release a Machi-chara image from setting. Machi-chara info You can display the title, file name, and others of the Machi-chara image.
Play Back Playlist You can repeatedly play back the melodies selected by “Edit playlist”. 1 m Data box Melody Playlist ■Operation while playing back a melody Operation Halt Key operation Oo( ), d, 0 through 9, a, s, l※1, Play melody See page 356. Set as ring tone Select an incoming type. “★” indicates the set item. File restriction You can set the file restrictions on the selected melody. File unrestricted or File restricted See page 240 for the file restrictions.
Data Management Delete all You can delete all melodies stored in the selected folder in the FOMA terminal. Enter your Terminal Security Code YES Delete this You can delete the melody stored on the microSD card. YES Delete all You can delete all melodies stored in the selected folder on the microSD card. Enter your Terminal Security Code YES Multiple-choice You can select multiple melodies stored on the microSD card and operate them.
Checking Kisekae Tool You can delete the pre-installed Kisekae Tool files. You can re-download them from the “P-SQUARE” site (see page 205). When you use a UIM other than the one used for downloading, the UIM security function (see page 38) is set for them. 1 m Data box Kisekae Tool Select a Kisekae Tool file. Information Clock display cannot be played back as a demo. Edit title See page 335. Preview You can display the detailed Kisekae Tool display.
microSD Card Data Management You need to obtain a microSD card separately to use the functions related to the microSD card. The microSD card is available at electronics retail stores, etc. P-08A supports a commercial microSD card of up to 2 Gbytes and microSDHC card of up to 16 Gbytes (As of April 2009). For the latest operation check information such as the memory capacity and manufacturers of microSD cards, access the following sites (in Japanese only).
■Removing 1 Open the cover following step 1 of “■Inserting” and push the microSD card until it stops. By pushing all the way in, the microSD card pops out. 2 Remove the microSD card. Displaying Data Items on microSD Card You can display the Phonebook entries, schedule events, ToDo items, mail messages, text memos, and bookmarks stored on the microSD card.
Function Menu of the Category List/microSD File Display/ Data List/Detailed Data Display Edit title Enter a title. You can enter up to 15 full-pitch/31 half-pitch characters. Add to phone See page 363. Data Management Overwrite to phone See page 364. Add one to phone See page 363. Add all to phone See page 363. Overwr. all to ph. See page 363. Copy to microSD See page 362. Copy to phone See page 363.
Information When you copy all files, the files stored as secret data are also copied. When you copy all the Phonebook entries, the information from the PushTalk Phonebook entry and the contents of “Own number” are also copied. For copying mail, some files attached to mail may be deleted depending on file format. When you copy mail containing links to start an i-αppli program, the information about starting the i-αppli program in that mail is deleted.
Overwrite to phone If the number of files stored on the microSD card increases, it may take long to read or write data. During copying, the FOMA terminal is placed in the same status as it is out of the service area. 1 Copying Still Images, Moving Pictures, etc. microSD File display i( ) Overwrite to phone Enter your Terminal Security Code YES YES or Data list i( ) Overwr. all to ph.
Information You can copy JPEG, GIF, SWF, MP4, MFi, SMF, PDF files and Decome-Anime templates in the “i-mode” folder, “Camera” folder, “Deco-mail picture” folder, “Deco-mail pictograms” folder and a user folder. You can copy multiple JPEG, GIF, SWF and MP4 files at a time but not others. When the files in the destination folder are stored to the maximum, a new folder is automatically created and files are saved to that folder.
Information Moving Copyrighted Files Move Files in the FOMA Terminal to the microSD Card You can move the copyrighted file obtained from a site to the microSD card after encoding. The moved file is then saved to the destination folder in the “Movable contents” folder (the specified destination folder for Chaku-uta Full® music files).
Back up/Restore Data Files Collectively You can back up the Phonebook entries, schedule events, ToDo items, mail messages, text memos, bookmarks, setting contents/information stored in the FOMA terminal to the microSD card collectively. The backup files are saved as a single file by category. When you restore those files, they are collectively restored to the FOMA terminal.
Delete Backup Files You can delete the backup files or interrupted backup files on the microSD card. 1 m LifeKit microSD Backup/Restore Delete backup data Enter your Terminal Security Code YES Data Management m Data box SD other files Select a folder. Folder list SD Other File list Function Menu of the SD Other File List Edit title See page 335. File info You can display the name and type of files. Attach to mail You can compose an i-mode mail message with the file attached.
Checking microSD Card You can check and recover the microSD card. 1 m LifeKit microSD Refer microSD data i( ) Check microSD YES Information By connecting the microSD card to the microSD card adapter, you can use the microSD card on a personal computer which supports SD card. The microSD card adapter is available at electronics retail stores, etc. For installing the microSD card adapter, refer to the instruction manual for the microSD card adapter.
Information Data Management If the FOMA terminal and personal computer are not correctly connected, or the remaining battery level of the FOMA terminal shows very low or goes flat, you cannot send or receive data. In addition, you may lose data. While data is being read or written, do not pull the FOMA USB Cable with Charge Function 01/02 off. Not only you cannot send or receive data, but also you may lose the data. While data is being read or written, you cannot set this function.
SD_PIM (Folder for Phonebook entries, schedule events, ToDo items, mail messages, text memos, and bookmarks) PIMddddd.### (Extension is VCF for Phonebook entries, VCS for schedule events and ToDo items, VMG for mail messages, VNT for text memos, and VBM for bookmarks.
Data Management Information Folder and file names may be displayed in lowercase characters depending on the personal computer you use. When the personal computer is set not to display extensions and hidden folders, change the setting and then operate. For how to change the setting, refer to the instruction manual for your personal computer or Help. Do not use the personal computer to delete or move the folders on the microSD card. The microSD card might not be read by P-08A.
Folder security [My picture/ imotion/Movie] You can set the folder to open only when you enter your Terminal Security Code. Enter your Terminal Security Code YES The folder changes to “ ”. To release it, perform the same operation. Send all Ir data See page 378. [My picture/ imotion/Movie/melody] You can delete all the files in the folder selected in “i-mode”, “Camera”, “Deco-mail picture”, “Deco-mail pictograms”, and user folder in “My picture”.
Information Data Management
■List of data files you can transfer Transfer terms Transferable data ■Storage location and order of received files Multiple One item items All items Phonebook (Own number) ○ — Up to 1,000 items Schedule※1 ○ — Up to 2,500 items ToDo ○ — Up to 100 items Received mail※2※3 ○ — Up to 2,500 items Sent mail※3 ○ — Up to 1,000 items Draft mail※3 ○ — Up to 20 items Decome-Anime template ○ — Up to 100 items Text memo ○ — Up to 20 items Melody※4 ○ — Up to 3,500 items ○ ○ Up to
Data Storage location/Order Still Image receive one data/ Stored on the top in the “i-mode” folder in “My picture” file receive multiple inside “Data box”. data receive all data Stored in the same folder as that of the sender in the same order. i-motion file receive one data/ Stored on the top in the “i-mode” folder in “imotion/ receive multiple Movie” inside “Data box”. data receive all data Stored in the same folder as that of the sender in the same order.
Sending/Receiving One or Multiple Data You can send/receive the data files one by one using infrared rays. You can send/receive multiple still images, i-motion files, and ToruCa files at a time. ■Notes on sending/receiving In Secret Mode, you can send secret data as well. However, in Secret Data Only, you can send only the secret data. If you receive a Phonebook entry stored as secret data during Secret Mode or Secret Data Only, the Phonebook entry is stored as an ordinary one.
Send All Data Display of the data file to be sent i( ) Send all Ir data Enter your Terminal Security Code. 1 Data Management To send the Phonebook entries, select “Send Ir/ trans/BT” → “Send Ir data” from the Function menu and then select “Send all phonebook”. To send schedule events from the Schedule list or detailed Schedule display, select “Ir/ transmission” → “Send Ir data” from the Function menu and then select “Send all”.
2 iC Communication Function iC communication is the function that enables you to send/receive data files to/from another FOMA terminal using the FeliCa reader/writer function. You can send/receive data files by facing the f mark of your FOMA terminal toward that of another FOMA terminal supporting the iC communication function. However, you cannot exchange some files depending on the other party’s FOMA terminal. Receive One Data You cannot use this function during Multitask.
Receive All Data You cannot use this function during Multitask. 1 Face the f mark of the FOMA terminal of the receiving end while the Stand-by display is shown to that of the FOMA terminal of the sending end. 2 YES Enter your Terminal Security Code Enter the same session number as that entered at the sending end. Information 2 3 4 Press Oo( Press Oo( Press Oo( Data Management ), 0 or p. Function Menu of the Voice Recorder Recording display File size setting Select an item.
Attach to mail You can save the recorded voice and attach it to i-mode mail. Go to step 2 on page 142. You can compose it also by pressing l( ). Store in See page 380. File restriction See page 240. Cancel You do not save the recorded voice. ■Operations when displaying a PDF file See page 382 for when you operate from the Function menu.
Data Management Copy to microSD See page 364. Copy to phone See page 365. Move to microSD See page 366. Move to phone See page 366. Copy See page 336. Move See page 337. Add desktop icon See page 31. Delete this See page 337. Delete all See page 337. Multiple-choice See page 337. Disp. bookmark See page 383. Memory info You can display the used memory space (estimate)/number of stored items. Add bookmark Sort See page 337.
Page layout At Viewer start-up Single page You can change the display layout of the PDF file. Single page, Continuous or Continuous-facing Display link You can display links set in the PDF file. Internal links (links set in the PDF file displayed), Web To, Mail To, and Phone To/AV Phone To are available for the links. Select a link. When multiple links are found in the display, you can select a link by pressing Bo. When you select an internal link, you can move to the linked page in the PDF file.
Delete all Enter your Terminal Security Code YES When bookmarks or marks are set to the maximum Display Mark You can list the marked pages and positions stored in the PDF file. When you select a mark, you can display the page in which the mark is stored. 1 While a PDF file is displayed i( ) Bookmark/mark Display mark Select a mark.
■Operations when displaying a document file See page 385 for when you operate from the Function menu. Operation Key operation Operation Function Menu while Document File is Displayed Key operation Upper scroll Zo Zoom out 1 Lower scroll Xo Fit page 2 Left scroll Co Next page c, 9, > Right scroll Vo Previous page m, 7, < Call up the key operation guide l Search 5 Search next 3 6 Zoom in Search previous 4 You can zoom in the file. You can zoom in the file up to 1,000%.
Information The search conditions work as shown below: Whole words only: Searches for character strings that completely match by unit of a word. Match case: Identifies between uppercase and lowercase for search. Search in this page (Excel file only): Searches in the currently displayed page only. Search in this file (Excel file only): Searches in the whole file.
Information To pull the plug out, take hold of the plug and then pull it out softly. Display Still Images on TV Play back a still image while the Flat-plug AV Output Cable is connected or connect the Flat-plug AV Output Cable while a still image is being played back.
Display Video from i-αppli 1 Start an i-αppli program while the Flat-plug AV Output Cable is connected or connect the Flat-plug AV Output Cable while an i-αppli program is running. To cancel AV output, pull off the Flat-plug AV Output Cable away from the FOMA terminal. When an i-αppli ends, or when another function starts up, AV output is canceled. Information Data Management AV output of i-αppli programs is unavailable during Play Background.
Convenient Functions Multiaccess . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Multitask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Informing You of an Incoming Call/Mail Message by Voice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Turning Power On/Off Automatically at a Specified Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using Alarm. . . . . . . . . . .
Receive a Voice Call during i-mode or during Packet Communication Multiaccess Multiaccess enables you to simultaneously connect to three lines; a voice call, packet communication, and SMS. To switch the displays, press and hold x for at least one second; or press x to switch from TASK MENU. (See page 392) See page 496 for details on combination of Multiaccess.
Multitask The FOMA terminal supports “Multitask” that enables you to use up to three functions such as menu functions (see page 32) at the same time. By combining Multiaccess and Multitask, you can use following functions simultaneously (see page 497 for the combination patterns of Multitask): Mail group Start Another Function When a function is running x m( ) Start another function. 1 For the icon of the group in use, “ ” or another mark is added.
Switch Displays When multiple menu functions are working, you can switch the displays by pressing and holding x for at least one second. The display switches from the latest one in chronological order. To display the menu list for functions in use Press x. You can switch displays by selecting a function from the list. Press c( ) or select “Stand-by display” to show the Stand-by display. Press m( ) or select “Open Menu” to show Main Menu. Convenient Functions Information Even if you press .
Read Aloud Volume m Set./Service Other settings Voice settings Read aloud volume Use Bo to adjust the volume. 1 Read Aloud Speed m Set./Service Other settings Voice settings Read aloud speed Select a speed. 1 Read Aloud Valid Setting You can set the voice guidance to be provided only when an earphone/ microphone (option) is connected. 1 m Set./Service Other settings Voice settings Read aloud valid set. Normal or Earphone Normal. . . . . .Always provides the voice guidance. Earphone. . . .
Convenient Functions Symbols are read aloud according to the Symbol list. When the same symbol continues three times or more, that symbol is not read aloud. “ヘンシン” is read aloud for the following character strings: “Re:”, “Re>”, “Re2:”, “Re2>” and “Re2＊” “テンソー ” is read aloud for the following character strings: “Fw:”, “Fw>”, “Fw2:”, “Fw2>”, “Fw2＊”, “Fwd:”, “Fwd>”, “Fwd2:”, “Fwd2>” and “Fwd2＊” When symbols for “Reply” or “Forward” are consecutively repeated, they are read aloud only once.
Volume Snooze Use Bo to adjust the volume. If you set “Step”, the alarm tone is silent for about three seconds, and then the volume steps up every about three seconds, from Level 1 through Level 6. You can set whether to activate Snooze. If you set to “OFF”, set the duration that the alarm tone is to continue sounding. ON or OFF Enter a ring time (minutes). You can enter from “01” through “10” in two digits. See page 396 for how Snooze works.
Convenient Functions When the time specified for “Alarm”, “Schedule” or “ToDo” comes The alarm sounds for about five minutes (in the case of “Alarm”, the alarm sounds for specified time), and illumination lights. The vibrator works as you set for “Phone” of “Vibrator”. The alarm message and an animation or i-motion file linking to the selected icon is played back on the display.
+m-4-5 Repeat Using Calendar to Manage Schedule Set repeat time. Unrestricted or XX times Enter the repeat time. Enter two digits from “02” through “99”. The item set with repetition is counted as one item. You can display the calendar by month to check the stored schedule events. You can display or store from January 1, 2000 through December 31, 2037. See page 396 for how alarm works.
Store Holidays Check Schedule Events You can store up to 100 holidays. However, you cannot store multiple holidays for the same date. Convenient Functions 1 2 m Stationery Schedule i( ) Settings Set holiday New Do the following operations. Date setting Select an item. Yearly [fixed date]. . . . . Enter the date. Yearly [- - - - - -, - - -] . . . Enter the month, week, and day of the week. Holiday name Enter a holiday name. You can enter up to 10 full-pitch/20 half-pitch characters.
3 Select a schedule event or birthday. Settings When you select a birthday and select “Sending mail”, you can compose an i-mode mail message to the first mail address in the Phonebook entry. (See “Mail To Function” on page 208) When you select “Calling”, you can make a call to the first phone number in the Phonebook entry. (See “Phone To/AV Phone To Function” on page 207) Kisekae setting You can change the design of the Calendar display. Select a pattern.
Function Menu of the Schedule List/Detailed Schedule Display New Go to step 1 on page 397. Convenient Functions Copy Go to step 1 on page 397. You can edit also by pressing m( ). When you edit a schedule event set with repetition, the confirmation display appears asking whether to edit the schedule event of the current day only. If you select “YES”, “Repeat” on the edit display changes to “1 time” (OFF), and a new schedule event is stored. If you select “NO”, the old schedule event is overwritten.
Set secret/ Release secret You can set/release secret for/from the schedule event. YES When you select “Set secret” in ordinary mode (not in “Secret mode” or “Secret data only”), enter your Terminal Security Code. Function Menu of the i-schedule List/Detailed i-schedule Display Schedule list You can display the schedule list stored in the i-schedule event.
Convenient Functions Due date Select an item. Enter date . . . . .Enter the date (due date) directly. Choose date . . .Select a date (due date) from the calendar. Check the date and press Oo( ). No date. . . . . . . .Does not set the date (due date). The alarm does not work. Priority Select a priority. If you sort the items in due date order, the items for the same due date are displayed from the higher priority. Category Select a category. Alarm Select an alarm method. ON. . . . . . . . . . .
Information During standby, the alarm tone sounds at the level set for “Phone” of “Ring volume”. During a call, the alarm tone sounds at the level set for “Volume” (earpiece volume). Setting Operating Conditions of Alarm You can set whether to sound an alarm of “Alarm”, “Schedule”, “ToDo” and “TV timer”, for when operating another function. 1 m Set.
Function Menu of the Private Menu List Add to menu You can store the frequently used function in the Private menu. Select a function to be stored. Press No to display the storable functions by main menu item or sub-menu item. Press Bo to highlight the function you store. Change BG image Set desktop/ Select a folder Select an image. key Add desktop icon See page 31. Convenient Functions long press set. See page 404. Reset menu You can reset the Private menu to the default.
+m-0 Storing Your Name, Mail Address and Other Information In addition to the phone number (own number) you have signed up, you can store your personal information such as your name, reading of your name, phone numbers (up to three), mail addresses (up to three), a postal address, location information, a birthday, memorandums, and a still image. If you change the mail address or register a secret code, change the mail address in this function as well.
Reset You can reset (delete) all the stored personal data such as phone numbers or mail addresses except own number. YES When the display for entering your Terminal Security Code appears, enter the code. +m-5-5 Record Your Voice during Standby m LifeKit Rec. msg/voice memo Voice memo YES 1 A beep sounds and recording starts. Speak into the microphone. To suspend the recording midway, press Oo( ), r or h. A beep sounds about five seconds before the recording time (for about three minutes) ends.
Total calls Displays the call cost from the time Reset Total Cost was executed to the current call. Calls reset Displays the date and time when Reset Total Duration was executed last time. Cost reset Displays the date and time when Reset Total Cost was executed last time. Information You cannot record a movie memo while operating each item in the Function menu.
Setting Call Cost Limit You can set the call cost limit for Total Calls and can be notified when it is exceeded. If you set “Auto reset setting” to “ON”, the call cost is reset at midnight on the 1st of the month and “ ” is deleted. 1 m Set./Service Call time/cost Notice call cost Enter your Terminal Security Code ON or OFF Enter a max cost. Using Calculator You can display the calculator to make the four rules of calculation (＋, −, ×, ÷). You can display up to 10 digits.
Function Menu while Text Memo is Displayed Edit Go to step 1 of “Making Text Memos” on page 408. Compose message You can compose an i-mode mail message containing the contents of the text memo. Go to step 2 on page 142. You can compose it also by pressing l( ). Edit schedule Set desktop/ You can create a schedule event containing the contents of the text memo. Go to step 1 on page 397. key Add desktop icon See page 31.
Convenient Functions Function Menu while the Phonebook List or SMS List is Displayed Start copy/ Start deletion You can start copy or deletion. Select this You can select the data item. Select all in tab You can select all the Phonebook entries in the displayed tab. Select all You can select all data items. Release this You can release the selection. Release all in tab You can release all the selected Phonebook entries in the displayed tab. Release all You can release all selections.
Selecting a Microphone for Use when an Earphone is Connected Receive Calls Using the Switch During ringing Press the switch of the Stereo Earphone Set. 1 A beep sounds and you are connected. With a videophone call, the image through your camera is sent to the other party. You can switch between that image and the substitute image by pressing m during the videophone call. (See page 73) You can answer calls also by operating the FOMA terminal.
Information Selecting Other Party to Call for when an Earphone is Connected When “Headset switch to call” is set to “Voice call” and the Stand-by display is shown, you can make a voice call by pressing the switch of the Stereo Earphone Set 01 (option). 1 m Set./Service Incoming call Auto call/answer set. Headset switch to call Voice call or OFF You can check the currently set phonebook entry by pressing l( 2 ). Search the Phonebook Select a Phonebook entry.
What You can Do with Bluetooth Function With your FOMA terminal, the following six services are available: Headset, Hands-free, Audio, Dial-up Communication, Object Push and Serial Port services. Also, the Audio/Video remote control service (Ver.1.3) might be available when you use the Audio service. (Only with compatible Bluetooth devices) Supported version Bluetooth Specification Ver. 2.
Connected service HFP A2DP ○ PushTalk ring tone ○ 1Seg audio i-motion file playback tone ○ ○※4 Caller’s voice from Record Message at voice call ○※3 Video playback tone ○ Movie file playback tone ○ MUSIC Player playback tone ○ Music&Video Channel playback tone Alarm preferred ○※5 ○※5 ○ ○※3 Operation preferred ※6 ※6 ※6 Alarm preferred ○※3 Operation preferred ※6 ※6 ※6 Alarm tone Mail ring tone Convenient Functions Notes on
Register Device You can register a Bluetooth device to the FOMA terminal. You can register up to 10 Bluetooth devices. m LifeKit Bluetooth Register New Devices 2 3 Select a Bluetooth device to be registered YES The Bluetooth devices around the FOMA terminal are searched. You need to place the Bluetooth device to be registered on standby for registration beforehand. Up to 20 searched devices are listed on the Device list. You can search for Bluetooth devices also by pressing l( ) from the Device list.
■Device list Device class : PC Function Menu of the Device List : Phone : Network device : Audio device : Peripheral device : Imaging device Register devices Go to step 3 on page 415. Preferred device You can set a Bluetooth device to be connected taking priority over other devices when a call comes in. You can set this for the Headset service compatible Bluetooth device only.
Information Even when Preferred Device is set, you cannot connect that device unless the Headset service is placed on standby for connection. When other Bluetooth device is connected with the Headset service, the Bluetooth device that is being connected has priority. You cannot delete when the status of Bluetooth device is during connection or on standby for connection.
Information When the Bluetooth communication is disconnected during a call on the Bluetooth device, the call state follows the setting of “Disconnection settings”. Play Back Audio of 1Seg Programs When you connect your FOMA terminal to a Bluetooth device using Audio service, you can output the audio of 1Seg programs from the Bluetooth device. Convenient Functions 1 2 Connect a Bluetooth device using Audio service. See page 415 for connecting to a Bluetooth device. Watch a 1Seg program.
2 Play back an i-motion file, movie file, video or music. The sound is output from the Bluetooth device. When the confirmation display appears asking whether to start output to the Bluetooth device, select “YES”. Once you connect the FOMA terminal to the Bluetooth device using Audio service, a connection history is stored. When the connection history is found, the FOMA terminal automatically tries to connect to the Bluetooth device for playing back a file even if you do not connect using Audio service.
Dial from headset You can set whether to make a call by pressing the switch on the Headset. Valid or Invalid MUSIC Player autostart You can set whether to automatically start/end MUSIC Player when you use the Audio service to connect to/disconnect from a Bluetooth device from the Stand-by display. ON or OFF Bluetooth info You can display the device name, Bluetooth address, device class, and supported profiles of Bluetooth function mounted on the FOMA terminal. You can change the device name.
Character Entry Entering Characters. . . . . . . . . . . . . . . . . . . Entering Characters in Mode 1 (5-touch) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using Common Phrases . . . . . . . . . . . . . . Cutting/Copying/Pasting Text. . . . . . . . . . . . . . . . . . . . . . . . . . . Storing Words in Own Dictionary. . . . . . . . . Using Learned Words . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Entering Characters The FOMA terminal is provided with many functions that require to enter characters such as creating the Phonebook or composing mail messages. Character Entry (Edit) Display Character Entry On the Character Entry (Edit) display, the information of character input method, input mode, and the remaining number of characters and others are displayed. Character input method ：Mode 2 (2-touch) ：Mode 3 (NIKO-touch) Not displayed in Mode 1 (5-touch).
Enter “タダの菓子” in a text memo. 1 m Stationery Text memo Select . 2 Enter hiragana characters in Kanji/Hiragana input mode. た→ Press 4 once and Vo once. の→ Press 5 five times. か→ Press 2 once. Use Co to move the cursor onto “の”. The conversion mode is automatically switched to the ordinary conversion mode. ). 5 Use Bo to move the cursor onto the candidate list Use Mo to highlight “菓子” and press Oo( ). The selected characters are fixed.
Data you are editing Other Entry Functions Item Operation/Explanation Katakana input Press l( ) a few times to switch to Katakana input mode Press keys to enter characters. Alphabet input Press l( ) a few times to switch to Alphabet input mode Press keys to enter characters. When you press c( ) in half-pitch Alphabet input mode, you can show the list of phrases frequently used for entering URLs and others.
Load template See page 144. [Message Entry display only] Symbols Save template See page 144. [Message Entry display only] Full pitch/Half pitch You can switch between full pitch and half pitch. Copy See page 428. Cut See page 428. Paste See page 428. Undo You can undo the fixed, deleted, or pasted text, etc. You can undo the operation also by pressing and holding d for at least one second. You can undo the operations up to 10 times, except on the Message Entry display.
Input time Quote phonebook Character Entry Quote own data Select a format for entering the date/time Enter the date/time. You can enter the date/time using the numeric keys. You can enter years 1800 through 2099. You can access and quote Phonebook entries.
Information +m-3-8 Using Common Phrases You can call up and enter, on the Character Entry (Edit) display, the common phrases pre-installed in the FOMA terminal, or your own created common phrases. The common phrases are sorted into 5 folders and each folder contains 10 of them. You can edit the pre-installed common phrases to save as your own common phrases. Display Common Phrases m Stationery Common phrase/dic. Common phrases Select a folder.
Reset name You can reset the folder name to the default. YES Paste You can paste cut or copied characters. Function Menu of the Common Phrase List/Common Phrase Display Enter a common phrase. You can enter up to 64 full-pitch/128 half-pitch characters. When you delete all the characters in a common phrase, the common phrase is reset to the default. You can edit a common phrase by pressing l( ).
Information When you display Own Dictionary from the Function menu of the Character Entry (Edit) display, select “Delete” from the Function menu, then select “Delete this” or “Delete all”. “Delete selected” does not appear when you display Own Dictionary from the Function menu of the Character Entry (Edit) display.
Entering Characters in Mode 2 (2-touch) Entering Characters in Mode 3 (NIKO-touch) When you press two numeric keys to enter two-digit numerals, a character (symbol) that corresponds to the numerals is entered. Press the first key to list candidate characters (symbols) at the lower part of the display. To list candidate characters, you need to set “2/NIKO-touch guide” to “ON” in advance.
Network Services Checking New Voice Mail Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using Voice Mail Service . . . . . . . . . . . . . . . . . . . . Using Call Waiting Service . . . . . . . . . . . . . . . . Using Call Forwarding Service . . . . . . . . . . Using Nuisance Call Blocking Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking New Voice Mail Messages You can check whether any message is held at the Voice Mail Service Center. 1 m Set./Service NW services Voice mail Check new messages OK About checked results Network Services If any voice mail message is held, the “Voice mail” icon ( ) and another Voice Mail icon (such as “ ”) appear to inform you of the held message.
Use Voice Mail Service m Set./Service NW services Voice mail Do the following operations. 1 Play messages You can play back messages recorded for the Voice Mail. Play (voice call) or Play (videophone) YES Operate following the voice guidance. The display for selecting “Play (voice call)” or “Play (videophone)” does not appear when only one type of message is recorded. Activate YES YES Enter a ring time (seconds). Enter from “000” through “120” in three digits.
Forward an Incoming Call to Voice Mail Service Center during Ringing You can connect an incoming call to the Voice Mail Service Center just by a simple key operation. Even if you do not set Voice Mail Service to “Activate”, the service will be available using this function. 1 During ringing i( ) Voice mail You can connect the incoming call to the Voice Mail Service Center also by pressing i( ), and pressing s.
Information For an incoming call or communication that is not supported by Call Waiting, press -d from the Call Receiving display to show the confirmation display telling that you can answer a new call if you end the current call. Press -h to end the current call, and then the Call Receiving display appears. When you select “OK”, the Call Receiving display during a call returns.
Using Call Forwarding Service This service forwards incoming voice calls/videophone calls when you are in a place where radio waves do not reach, the power is turned off, or you do not answer calls within a specified time. When Record Message (see page 69) or Remote Monitoring (see page 77) is simultaneously activated and you want to give Call Forwarding Service priority, set its ring time shorter than that for “Record message setting” or “Remote monitoring”.
Set On/Off of Forwarding Guidance 1429 d Operate following the voice guidance. 1 Forward an Incoming Call during Ringing You can forward an incoming call to the phone number you specified as a “Forwarding number” by a simple key operation. Even if you do not set Call Forwarding Service to “Activate”, the service will be available using this function. 1 During ringing i( Using Nuisance Call Blocking Service You can register so as not to receive “nuisance calls” such as crank calls.
Delete last entry Delete all entries You can delete the phone number registered last. Repeat the same procedures to delete phone numbers one by one from the one registered last. YES OK YES OK Check No. of entries You can check the number of phone numbers registered for rejection.
Switching Guidance Language between Japanese and English You can set the guidance for network services such as “Voice mail” or the voice guidance such as for the out-of-service area, to be played back in English. ■Outgoing (Guidance to yourself) Language Japanese English Description Plays back the guidance in Japanese. Plays back the guidance in English.
Call forwarding You can forward voice calls or videophone calls that come in during a call to the forwarding destination. Call rejection You can reject voice calls, videophone calls, or 64K data communication that come in during a call. Answer If you have set “Call waiting” to “Activate” and receive a voice call during a voice call, you can use “Call waiting”.
Number Setting You can register additional numbers, and edit the registration names for them. 1 m Set./Service NW services Multi number Number setting Select an additional number. You can register/edit also by pressing i( ) and selecting “Edit” or by pressing l( ). Select the registered additional number to check the registration name and phone number. To delete the registered additional number, press i( ) and select “Delete this” or “Delete all”, then select “YES”.
<2in1> Using 2in1 You can use two phone numbers/mail addresses on your single FOMA terminal. By using respective modes, you can operate your FOMA terminal as if you are using two sets of them. The following three modes are available with 2in1: Network Services A Mode You can use your phone number (Number A) to make calls and your i-mode mail address (Address A) to send/receive mail messages, and can browse their related data.
Stand-by display You can set the Stand-by display that appears in Dual Mode or B Mode. Select a mode Set the Stand-by display. See page 109 for how to set the Stand-by display. However, “iαppli display” is not displayed. If you select “Release”, the setting returns to the default. Clock setting You can set the clock that appears on the Stand-by display in Dual Mode or B Mode. Select a mode Set a clock. See page 118 for how to set the clock. Change recv. avoid. You can set Receive Avoidance Set.
Information Send an i-mode Mail Message in Dual Mode When “Mode link setting” is activated, you cannot switch the mode of 2in1 out of the service area. When you compose an i-mode mail message in Dual Mode, you can select a sender’s address from “Address A” or “Address B”.
■Services available to each mode The items whose operations differ depending on the mode are listed. (Items that work the same way as with A Mode are omitted.
SMS Item Displaying※6 Network Services Sending Receiving A Mode Sent/Received SMS messages for Number A SMS messages from Number A SMS messages to Number A (with ring tone/vibration) SMS messages to Number B (without ring tone/vibration) B Mode Received SMS messages for Number B Unusable SMS messages to Number A (without ring tone/vibration) SMS messages to Number B (with ring tone/vibration) Dual Mode All SMS messages SMS messages from Number A All SMS messages (with ring tone/vibration) Receiving a
Information Using OFFICEED “OFFICEED” is an in-group fixed bill service that applies to the specified IMCS (In-building Mobile Communication System). The separate subscription is required for use. For details, check the DOCOMO-enterprise-oriented website (in Japanese only). http://www.docomo.biz/d/212/ Use OFFICEED Out-of-Area Forwarding Function You can use the OFFICEED out-of-area forwarding function to forward OFFICEED calls to out-of-OFFICEED area. 1 m Set.
Saving and Using Services When a new network service is provided by DOCOMO, you can register that service in the menu to use it. Add New Service m Set./Service NW services Additional service Additional service Highlight and press i( ) Add new service 1 You can change the setting for the registered service by pressing i( ) and selecting “Edit”. To delete the registered service, press i( ) and select “Delete this” or “Delete all”, then select “YES” → “OK”.
Overseas Use Outline of International Roaming (WORLD WING) . . . . . . . . . . Available Services Overseas . . . . . . . . . . . . . . . . . . . . . . . . . . . Confirmation for Using . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Making a Call at the Country You Stay . . . . . . . . . . . . . . . . . . . Receiving a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting a Network to Use. . . . . . . . . . . . . . .
Outline of International Roaming (WORLD WING) Overseas Use International Roaming (WORLD WING) is a service that enables you, using local carrier’s networks, to make calls or to communicate even in the foreign countries which are out of the service area of the FOMA network.
Confirmation for Using When the text of an SMS message sent to the other party who is using an overseas carrier contains characters that do not support those on the destination phone, the characters might not be correctly displayed. Confirmation before Departure Confirm below in Japan before you use the FOMA terminal overseas. ■About contract You do not need to subscribe to WORLD WING if you have subscribed to the FOMA service after September 1, 2005.
■Country/Area codes for major countries Use the following country/area codes when you make international calls or when you set Int’l Dial Assist.
■International prefix numbers for the universal number (Table 2) The international prefix numbers for the universal number for major countries are listed below.
Use “+” to Make an International Call Press and hold 0 for at least one second, then you can enter “+” when dialing. By using “+”, you can make international calls from the country you stay to the countries such as Japan. 1 0(for at least one second) Enter numbers in order of country/area code →area code (city code)→destination phone number d or Oo( ) Enter “81” as a country/area code when you make an international call to Japan.
Information While you use the FOMA terminal overseas, “Call setting w/o ID”, “Reject unknown”, and “Restrictions (except Restrict Dialing)” might not work. In addition, it might work as “Answer” regardless of the setting of “Arrival call act”. When a call comes in during international roaming, the call is forwarded from Japan. The caller is charged a call fee to Japan and the receiver is charged a receiving fee.
Information Setting a Telecommunication Carrier to Preferentially Connect to You can specify the priority order of carriers you are connected to for when “Network search mode” is set to “Auto”. You can store up to 20 carriers. 1 m Set./Service Network setting Int’l roaming PLMN setting You can select the stored carrier to check the stored contents. 2 i( When the “DOCOMO” network is available, you are preferentially connected to it regardless of this setting.
Setting Guidance during Roaming For an incoming voice call or videophone call during international roaming, you can have the voice guidance played back to the caller to that effect. Even when you activate Roaming Guidance, the caller may hear the guidance in a foreign language depending on the overseas carrier. Even when you deactivate Roaming Guidance, the caller hears a ringback tone set by the overseas carrier. You need to set this function in Japan. 1 m Set.
Using Network Services during Roaming You can use some network services such as Voice Mail Service or Call Forwarding Service from overseas. You can set Roaming Guidance as well. See page 443 for “Receive avoidance set.” of 2in1. This setting might not be available depending on the overseas carrier. Operate Voice Mail Service at the Country You Stay m Set./Service Network setting Int’l roaming Voice mail (Int.) Select an item YES Operate following the voice guidance.
PC Connection Data Communication Available from FOMA Terminal . . . . . . . Before Using Data Communication . . . . . . . . . . . . . . . . . . . . . . Setup Flow for Data Transfer (OBEX™ Communication). . . . . Setup Flow for Data Communication . . . . . . . . . . . . . . . . . . . . . AT Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Introduction of DOCOMO Keitai Datalink . .
Data Communication Available from FOMA Terminal The data communication services you can use by connecting the FOMA terminal to a personal computer are categorized into data transfer (OBEX™ communication), and packet communication/64K data communication. The FOMA terminal is equipped with the adapter function for packet communication. You might not be able to activate or operate other functions during data communication. See “Multiaccess Combinations” on page 496 for details.
Before Using Data Communication Charge of Internet service provider To use the Internet, you need to pay the charge for the Internet service provider you use. Besides the FOMA service fee, you need to directly pay this charge to the Internet service provider. For details on the charge, contact the Internet service provider you use. You can use the DOCOMO Internet access service, “mopera U”. To use “mopera U”, subscription (charged) is required. Setting access point (Internet service provider, etc.
Information Use a dedicated “FOMA USB Cable with Charge Function 01/02” or “FOMA USB Cable”. The USB cable for personal computers cannot be used because the shape of the connector differs. If you use a USB hub, the devices may not work correctly.
Setup Flow for Data Communication The following outline shows a setup flow for packet communication or 64K data communication: For details, refer to the PDF version of “Manual for PC Connection”. For USB connection Connect a personal computer to the FOMA terminal using the FOMA USB Cable with Charge Function 01/02 (option). For Bluetooth connection Connect a personal computer wirelessly to the FOMA terminal using Bluetooth communication.
464
Appendix/Troubleshooting Function List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Simple Menu Function List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . List of Characters Assigned to Keys (5-touch Input Method) ..................................................... List of Characters Assigned to Keys (2-touch Input Method) ..................................................... List of Characters Assigned to Keys (NIKO-touch Input Method) ...............
Function List Execute “Reset settings” on page 138 for the items indicated by , and “Reset TV settings” on page 263 for the items indicated by ※, to return to the respective defaults. If you execute “Initialize” on page 139, all items return to the defaults. Even if you execute “Initialize”, the pre-installed i-αppli programs you have deleted are not restored.
Main menu item Sub-menu item Mail Mail settings SMS settings Area mail settings i-mode iMenu Lower sub-menu item Auto-start attachment Feel＊Mail Chat setting Check settings SMS report request SMS validity period SMS input character SMS center setting Receive setting Beep time Manner/Public mode set Check ring tone Other menu Search Bookmark Screen memo i-mode Browser Last URL Enter URL i-Channel Channel list Ticker ON/OFF Ticker font size set. Ticker color set.
Main menu item Sub-menu item i-mode i-mode settings Lower sub-menu item i-mode Browser set. Appendix/Troubleshooting Full Browser set. Common settings 468 Setting at purchase Font size setting: Standard Image display setting※: ON Sound setting: Level 4 Movie auto play set.: Valid Movie in page DL set.: Confirm always Script setting: Valid Pointer/scroll Display pointer: OFF Speed: Low speed Phone info use setting: Valid Cookie setting: Valid (No cookies) Referer setting: Valid Window auto-open set.
Main menu item Sub-menu item i-mode i-mode settings Full Browser Home i-αppli Software list(phone) iαppli(microSD) iαppli call logs iαppli info iαppli settings Lower sub-menu item Check settings Pre-installed i-αppli programs only Display: Icon display Auto start time: All unchecked Software list iαppli data End stand-by info End Widget appli inf Security error history Auto start info Trace info Auto start setting Disp. software info i-Widget roaming set. i-Widget sound effect iαppli call settings Set.
Main menu item Sub-menu item Set./Service Sound Appendix/Troubleshooting Display 470 Lower sub-menu item Mail/Msg.
Main menu item Sub-menu item Set./Service Display Lower sub-menu item Backlight (m70) View blind Color theme setting (m86) Machi-chara Menu icon setting (m57) Private menu setting (m52) Reference 112 112 112 112 112 113 113 115 114 403 404 29 25 117 118 44 111 113 113 32 471 Appendix/Troubleshooting Desktop icon (m63) Key guidance Font (m66) Font size setting Select language (m15) Recv.
Appendix/Troubleshooting Main menu item Sub-menu item Set./Service Illumination Kisekae i-concier 472 Lower sub-menu item Setting at purchase All illum.
Main menu item Sub-menu item Set.
Main menu item Sub-menu item Set./Service Call time/cost Clock Appendix/Troubleshooting Incoming call Talk 474 Lower sub-menu item Call data (m61) Setting at purchase Last call duration/Total calls duration: 0 seconds Last call cost: ¥＊＊ Calls reset/Cost reset: --/-- --:-Reset total cost&dura.
Main menu item Sub-menu item Set./Service Talk PushTalk Videophone Lower sub-menu item Hold tone setting Shikkari Talk Noise reduction (m76) Quality alarm (m75) Reconnect signal (m77) Auto answer setting Ring time setting Hands-free w/ PushTalk PushTalk arrival act Sound setting Vibration setting Visual preference Select image Hands-free w/ V.
Appendix/Troubleshooting Main menu item Sub-menu item Set.
Main menu item Sub-menu item Set./Service NW services Lower sub-menu item 2in1 setting Multi number Arrival call act Set in-call arrival act Remote control Dual network English guidance Set Roaming guidance Additional service Service numbers OFFICEED Chaku-moji Other settings Battery Pause dial (m84) Sub-address setting Headset mic.
Main menu item Sub-menu item Set.
Main menu item Sub-menu item Data box imotion/Movie Melody (m16) Kisekae Tool Machi-chara Chara-den Setting at purchase Pre-installed data only User created folder: None Playlist: Not stored Position memory: All not stored Played history: No histories Volume i-motion: Level 4 Movie: Level 12 Folder security: All released Set imotion: All released Sort: By date↑ Listing: Title + Image Sound effect Remaster: OFF Listening: OFF Equalizer: Normal Display size i-motion: Fit in display Movie: Actual size Cha
Main menu item Sub-menu item Data box 1Seg Lower sub-menu item Image Video Position memory LifeKit Document viewer SD other files Bar code reader Receive Ir data (m79) microSD Appendix/Troubleshooting Camera 480 Scan code Saved data Receive Receive all Refer microSD data Backup/Restore Photo mode/ Movie mode Setting at purchase No data Sort: By date↑ Picture/Title name: Picture Display size: Normal Volume: Level 12 Listing: Title + image All not stored — — — Not stored — — — — Inside camera/Outside
Main menu item Sub-menu item LifeKit Camera Bluetooth Map/GPS Lower sub-menu item View photos View movies Device list Reference 478 479 415 416 415 417 417 417 419 419 419 419 419 420 420 420 323 322 325 326 323 326 327 327 327 481 Appendix/Troubleshooting Setting at purchase Same as “My picture” in “Data box” Same as “imotion/Movie” in “Data box” Not stored Preferred device: Not set Register New Devices — Activate Bluetooth/Bluetooth — power OFF Accept registered — Accept dialup devices — Bluetooth
Main menu item Sub-menu item LifeKit Map/GPS Rec. msg/voice memo (m55) Lower sub-menu item GPS settings Play/Erase msg. Play/Erase VP msg. Record message setting Voice memo Voice announce Voice recorder i-concier Phonebook Data Security Service Connect to Center Exchanging history PB image sending Add to phonebook Phone UIM All? Reading? Group? Memory No.
Main menu item Sub-menu item Phonebook Group setting Restrictions Phonebook settings (m26) Lower sub-menu item Restrict dialing Call rejection Call acceptance Call forwarding Voice mail Font size setting Voice dial setting Mail group Chat group Forwarding image Stationery No. of phonebook Alarm (m44) Schedule (m45) Text memo (m42) Calculator (m85) Guide Common phrase/dic.
Main menu item Sub-menu item MUSIC MUSIC Player 1Seg Lower sub-menu item Music&Video Channel Activate 1Seg Program guide TV timer list Timer recording list Appendix/Troubleshooting Recording result TVlink Channel list Channel setting User settings Select area Auto channel setting Display※ Video※ Display light※ Sound effect※ Recording※ 484 Setting at purchase Reference No data 275 Playlist: Not stored 283 Information of previously played music file: None 275 Display: Title + Image 275 Volume: Leve
Main menu item Sub-menu item 1Seg User settings Lower sub-menu item Data broadcasting※ ECO mode※ Reset channel setting Reset storage area Reset TV settings Check TV settings Osaifu-Keitai IC card content DCMX ToruCa IC card lock set. Settings — — — — Pre-installed i-αppli programs only — IC card lock IC lock (power-off) Receive ToruCa Auto reading ToruCa Recv.
Appendix/Troubleshooting Simple Menu Function List Main menu item Sub-menu item/Lower sub-menu item Phone Add to phonebook Search phonebook Dialed/recv. calls Dialed calls Received calls Record message Play/Erase msg. Play/Erase VP msg.
Reference 403 29 25 117 118 44 111 113 113 32 126 124 126 312 132 133 133 131 136 135 123 123 520 128 114 407 407 408 408 45 46 46 394 403 104 107 64 Main menu item Sub-menu item/Lower sub-menu item Settings Incoming call Setting when opened Record display set Disp. PH-book image Disp. call/receive No. Ring time V.phone while packet Auto call/answer set. Melody Call setting NW services Caller ID notification Voice mail Call waiting Call forwarding Nuis.
List of Characters Assigned to Keys (5-touch Input Method) Display abc 123 漢 カナ -1 .
List of Characters Assigned to Keys (2-touch Input Method) 2 3 あ か さ た な は ま や ら わ い き し ち に ひ み （ り を う く す つ ぬ ふ む ゆ る ん え け せ て ね へ め ） れ ゛ お こ そ と の ほ も よ ろ ゜ Ａ Ｆ Ｋ Ｐ Ｕ Ｚ ￥ ＊ １ ６ Ｂ Ｇ Ｌ Ｑ Ｖ ？ ＆ ＃ ２ ７ 8 9 0 Ｃ Ｈ Ｍ Ｒ Ｗ ！ Ｄ Ｉ Ｎ Ｓ Ｘ Ｅ Ｊ Ｏ Ｔ Ｙ ／ ３ ４ ５ ８ ９ ０ 1 2 3 4 5 6 7 8 9 0 ゎ ゅ 3 ア カ サ タ ナ ハ マ ヤ ラ ワ イ キ シ チ ニ ヒ ミ ( ウ ク ス ツ ヌ フ ム ユ ル ン リ ヲ エ ケ セ テ ネ ヘ メ ) レ ﾞ オ コ ソ ト ノ ホ モ ヨ ロ ﾟ Ａ Ｆ Ｋ Ｐ Ｕ Ｚ ￥ ＊ １ ６ Ｂ Ｇ Ｌ Ｑ Ｖ ？ ＆ ＃ ２ ７ 8 9 0 Ｃ Ｈ Ｍ Ｒ Ｗ ！ Ｄ Ｉ Ｎ Ｓ Ｘ − Ｅ Ｊ Ｏ Ｔ Ｙ ／ ３ ８ ４ ９ ５ ０
List of Characters Assigned to Keys (NIKO-touch Input Method) Appendix/Troubleshooting 490 1 2 3 4 5 6 7 8 9 0 Katakana input mode 1 2 3 Second digit 4 5 6 7 あ か さ た な は ま や ら わ い き し ち に ひ み ゆ り を う く す つ ぬ ふ む よ る ん え け せ て ね へ め ゃ れ 、 お こ そ と の ほ も ゅ ろ 。 8 9 0 ． − ＠ ＿ １ a b c ２ d e f ３ i ４ っ g h j k l ５ m n o ６ p q r s ７ ょ t u v ８ w x y z ９ ・ ! ? ０ First digit First digit Kanji/Hiragana input mode 1 2 3 4 5 6 7 8 9 0 Information 1 2 3 Second digit 4 5 6 7 ア カ サ タ ナ ハ マ ヤ ラ ワ イ
Symbol List When “Read aloud settings” is set to “ON”, symbols are read aloud.
Appendix/Troubleshooting Symbol Voice guidance Symbol Voice guidance Symbol Voice guidance Symbol Voice guidance Ζ ゼータ σ シグマ Ь ミャーフィーズナーク я Η Θ イータ シータ τ υ タウ ユプシロン Э Ю エー ユー ─ │ — Ι イオタ φ ファイ Я ヤー Κ Λ カッパ ラムダ χ ψ カイ プサイ а б アー ベー Μ ミュー ω オメガ в Ν ニュー А アー г Ξ グザイ Б ベー Ο オミクロン В Π Ρ パイ ロー Г Д Σ シグマ Τ Υ タウ ユプシロン Φ Χ Symbol Voice guidance ④ マルヨン — ⑤ ⑥ マルゴ マルロク ┌ — ⑦ マルナナ ┐ — ┘ — ⑧ ⑨ マルハチ マルキュー ヴェー └ — ⑩ マルジュー ゲー ├ — д デー ┬
Symbol ㍗ ㌍ ㌦ ㌣ ㌫ ㍊ ㌻ ㎜ ㎝ Voice guidance ワット カロリー ドル セント パーセント ミリバール ページ ミリメートル センチメートル Symbol ㎞ ㎎ ㎏ ㏄ ㎡ ㍻ 〝 〟 № Voice guidance キロメートル ミリグラム キログラム シーシー ヘーホーメートル ヘーセー — — ナンバー Symbol ㏍ ℡ ㊤ ㊥ ㊦ ㊧ ㊨ ㈱ ㈲ Voice guidance ケーケー デンワ マルウエ マルナカ マルシタ マルヒダリ マルミギ カッコカブ カッコユー Symbol ㈹ ㍾ ㍽ ㍼ ≒ ≡ ∫ ∮ ∑ Voice guidance カッコダイ メージ タイショー ショーワ ニアリーイコール ゴードー インテグラル ファイ シグマ Symbol √ ⊥ ∠ ∟ ⊿ ∵ ∩ ∪ Voice guidance ルート スイチョク カク チョッカク サンカッケー ナゼナラバ キョーツー ガッペー ※1 Does not read aloud if it is not for a URL or mail address.
Pictogram List When “Read aloud settings” is set to “ON”, pictograms are read aloud.
Pictogram Voice guidance シンゲツマーク Pictogram Voice guidance Pictogram Voice guidance Pictogram Voice guidance Pictogram Voice guidance ケッテーマーク ボケーッマーク ナミマーク カケヅキマーク ドコモポイント マーク アイアプリマーク ラブラブマーク フジサンマーク ハンゲツマーク ユーリョーマーク アイアプリマーク オーケーマーク クローバーマーク ミカヅキマーク ムリョーマーク ティーシャツマーク アッカンベーマーク サクランボマーク マンゲツマーク アイディーマーク ガマグチサイフマーク ウィンクマーク チューリップマーク イヌマーク パスワードマーク ケショーマーク ウレシイマーク バナナマーク ネコマーク ツギアリマーク ジーンズマーク ガマンマーク リンゴマーク リゾートマーク クリアマーク スノボマーク ネコマーク ワカバマーク クリスマスマーク サーチマーク チャペ
Multiaccess Combinations Communication event i-αppli Packet communication 64K data software (Data communication) communication running Outgoing Incoming Outgoing Incoming Outgoing Incoming Connecting Sending Receiving Sending Receiving Outgoing Outgoing Sending Receiving Sending Receiving Voice call Appendix/Troubleshooting Communication status Voice call Videophone call PushTalk i-mode i-mode mail SMS※1 i-αppli※13 i-αppli software running Packet communication (Data communication) 64K data communication
Multitask Combinations When the functions in the same group ( appear depending on the operation. Started function part in the table) conflict, the display for switching active functions appears. However, it might not i-mode group Push Talk — — — — — — — — — Set.
Appendix/Troubleshooting ※10: If you use Multitask to switch functions while you are using the Picture viewer (microSD card), i-motion player, Video player, Chara-den player, or Melody player, or while playing back a demo from “MUSIC” in Data Box, display or playback ends. You cannot switch functions while you are editing an i-motion file.
Services Available for FOMA Terminal Available services Directory assistance service (Charges apply: guidance fee + call fee) ※Listed phone numbers only can be given.
Introduction of Options and Related Devices Appendix/Troubleshooting Combining various options with the FOMA terminal, you can realize more versatile use from personal purpose to business purposes. Some products may not be dealt in depending on the area. For details, consult a handling counter such as a docomo shop. For details on options, refer to the user’s manuals of respective options and related devices.
Problem Troubleshooting First of all, check to see if you need to update the software program and then update it if necessary. See page 515 for how to update software programs. When the symptom persists even after you check the countermeasures for the problem you suffer, feel free to contact the “Repairs” counter listed on the back page of this manual or a repair counter specified by DOCOMO. Problem Countermeasures The usable time of the battery is short.
Problem Countermeasures Turn off and on the FOMA terminal, or remove and Cannot talk. attach/insert the battery pack or UIM. (Example: “ ” does not disappear even if you Depending on the radio wave property, you may not move to another place. You cannot make or be able to make or receive a call even if the FOMA receive a call, though the terminal is “within service area” or “ ” is radio wave conditions displayed as the radio wave condition. Move to are not bad.) another place and redial.
Problem Countermeasures “ ” is displayed, and You may be out of the international roaming service the international roaming area or weak radio waves are being received. service is not available. Refer to the international service guides such as “Mobile Phone User’s Guide [International Services]” to check if the area or carrier is available. Search for an available carrier by Network Search Mode. Switch 3G/GSM Setting to “Auto” or any available network after moving from Japan to overseas.
If Error Messages Appear as Mentioned Below “(numerals)” in error messages are the code sent from the i-mode Center for discriminating the error. A Error Message (A - C) Appendix/Troubleshooting “Accept serial port devices” failed …An error occurred during the standby for registering the serial port, so the serial port was not placed on standby for registration. Activating …Receive Option Setting is set to “OFF”. Switch the setting to “ON” and try again.
Check SMS center setting …The SMS Center is not correctly specified by SMS Center Setting. Specify the SMS Center and try again. (See page 188) Conditional access Cannot watch …Receiving by limited method, so you cannot watch. Connection failed (403) …You cannot connect to a site or Internet website. Connection failed (503) Connection failed (562) …You could not connect because of network trouble. Wait a while and try again.
Device list is full No device to overwrite …The maximum number of Bluetooth devices is stored, so you cannot store any more. Delete unnecessary Bluetooth devices. (See page 416) Error Message (D - I) Appendix/Troubleshooting Downloaded data exists Cannot connect to network …Save the movie file on the movie acquisition completion display, and then close the data acquisition completion display.
Invalid Cannot resend …The address is invalid or the text exceeds the size that can be entered, so you cannot re-send. Invalid code …The entered USSD is incorrect. Enter the correct one. (See page 448) Invalid data (XXX) …Received data has an error, so cannot be displayed or saved. The received data is discarded. A three-digit numeral is displayed for (XXX). Invalid func in this UIM …The function cannot be operated from the inserted UIM. Invalid ID …The entered ID is wrong. Enter the correct ID.
Memory shortage Cancel update Memory shortage End document viewer Error Message (M - P) Appendix/Troubleshooting Memory shortage Failed to create font effect No response (408) …No response from the site or Internet website, so you could not connect to it. Try again. No set melody …This is displayed when you try to play back melodies with the playlist unprogrammed. Program the melodies and then play them back.
Protected all Cannot delete …All data items are protected, so cannot be deleted. Release the protection and try again. (See page 166, page 178, page 203) Protected Cannot delete Protected mail Cannot delete Replace with a new one or check the disk …The microSD card formatting is abnormal. Execute Check microSD. (See page 369) Service is used by a previous software Unable to download Delete a service? Replay period has not started yet …Playable date has not come yet, so you cannot play back the file.
Software already updated …The target software program is not updated, so you cannot execute. Software for this folder deleted Refer to Open folder …The corresponding mail-linked i-αppli program has been deleted. Error Message (S - T) Appendix/Troubleshooting Software for this folder exists Cannot delete …The corresponding mail-linked i-αppli program is contained, so you cannot delete. Software terminated due to security error …i-αppli DX has forcibly been ended.
This UIM cannot be recognized …An error occurred on the UIM or the PUK (PIN unblock code) is blocked. Contact the handling counter of a docomo shop. …Check to see if the correct UIM is inserted. (See page 37) This UIM cannot be recognized Phone is restarted …This UIM cannot be recognized correctly. The system is restarted and then the Stand-by display returns. Too much data was entered …Too many entered characters to send. Decrease the number of characters and send again.
Unable to set for storage …There are no unoccupied memory numbers within the folder, so you cannot set. Unable to support this card …The inserted memory card cannot be used on P-08A. Use P-08A compatible microSD card. (See page 360) Unable to switch audio data …There is only one audio, so you cannot switch. Unable to upgrade …An error occurred, so you could not upgrade.
Warranty and After-sales Services Warranty ■In warranty period ・Your FOMA terminal is repaired charge free in accordance with the terms of warranty. ・Make sure that you bring the warranty card to the counter for the repair. If you do not show the warranty card, or when troubles or malfunctions are regarded to be caused by your mishandling, the repair cost is charged even within the warranty period.
Appendix/Troubleshooting ◎Other points to note Make sure not to modify the FOMA terminal or its accessories. ・Catching fire, giving injury, or causing malfunctions may result. ・For the repair of devices that the modification is applied to, we accept it if you agree to have the modification reset. Further, we might reject to repair depending on the conditions of the modification. The following might be regarded as modifications: ・To put stickers, etc.
Updating Software Do not remove the battery pack while updating software programs. You may fail to update. You can update software programs with the Phonebook entries, images shot by the camera, or downloaded data retained in the FOMA terminal; however note that data may not be protected depending on the conditions (such as malfunction, damage, or drench) your FOMA terminal is placed in. You are advised to backup important data.
Update Software Programs Automatically You can download new software programs automatically, then the updating is operated at the time you specified beforehand. When the rewriting state is ready, the “Rewrite notification” icon appears. Then you can confirm the rewrite time and select whether to change the rewrite time or rewrite the program immediately.
Start Software Update If you select “Only notification” of “Set auto-update”, “Update notification icon” notifies you when software update is necessary. You can start Software Update by selecting “Update notification icon”, or from the Menu display. 3 When updating is not necessary, “No update is needed” is displayed. Use the FOMA terminal as it is. When updating is necessary, “Update is needed” is displayed. You can select either “Now update” or “Reserve”.
Update Software Now (Update Now) When you select “Now update”, “Start download” is displayed and downloading starts after a while. (Select “OK” to start downloading right now.) 1 You can answer voice calls during download. If you cancel downloading midway, the data downloaded up to that point is deleted. Once downloading starts, updating proceeds automatically; you do not need to select menu items. Appendix/Troubleshooting 2 When downloading is completed, rewriting the software programs starts.
2 Confirm the date and time you selected. Select “YES”. Your FOMA terminal communicates with the server again and then the reservation is completed. Check, Change, or Cancel the Reserved Date and Time Select “Software update” from the setting menu, then enter your Terminal Security Code and select “Update”; then you can confirm the reserved time. You can change or cancel the reserved date and time from the display for checking reservation. To change, select “Change”. To cancel, select “Cancel”.
Protecting FOMA Terminal from Harmful Data First of all, update the pattern data to make it the latest. Regarding data and programs downloaded or obtained from sites, i-mode mail messages or SMS messages to the FOMA terminal, you can detect data that might cause failure, can delete it, and can stop starting an application program. Use the pattern data for checking. Update the pattern data, because it is upgraded each time new trouble is found.
Update Pattern Data Automatically ■The displays for scanning result Alert level 0 Alert level 1 Alert level 2 You can set whether to update the pattern data inside your FOMA terminal when the pattern data is created anew. 1 2 m Set./Service Lock/Security Scanning function Set auto-update ON or OFF YES OK When you select “ON” in step 1, the confirmation display appears telling that your mobile phone information is sent at auto-update.
Main Specifications Recording ■Handset Model P-08A Dimensions (when closed) Height: Approx. 112 mm Width: Approx. 50 mm Depth: Approx. 17.9 mm (at thickest point: Approx. 19.7 mm) Weight (with the battery pack attached) Approx. 136 g Continuous FOMA 3G/GSM standby /3G setting [3G] time 3G/GSM setting [Auto] In motion: Approx.
■The number of files that can be saved to the microSD card (64 Mbytes) Specifications for Still Image Shooting Image quality File format Compression format Extension Title/File name JPEG Baseline format jpg Automatically set according to the date and time the image was saved and the number of shot frames (when the 1st frame was shot at 10:00 on November 18, 2009) Title “2009/11/18 10:00” File name “2009111810000000” (Store in: Phone) “P1000001” (Store in: microSD) Maximum file size 2.
Estimate of recordable time The recordable time varies depending on shooting environments. Take reference to the recordable time and memory capacity which appear on the Finder display as well. ■Recordable time to P-08A (See “Voice” for the recordable time of Voice Recorder.
■Recordable time to microSD card (64 Mbytes) (See “Voice” for the recordable time of Voice Recorder.) Image size File size setting Movie type set Long time Normal Video Voice Normal Video Voice Normal Video Voice Normal Video Voice Normal Video Voice VGA (640 x 480) HVGA Wide (640 x 352) QVGA (320 x 240) QCIF (176 x 144) Sub-QCIF (128 x 96) Recordable time per recording (Approx.
Number of Savable/Registerable/ Protectable Items in FOMA Terminal Function Phonebook 1Seg Appendix/Troubleshooting Schedule TVlink TV timer Timer recording Schedule Holiday ToDo Text memo Mail Received mail (total of SMS messages and Sent mail i-mode mail messages) Draft mail※8 User created folder (Inbox) User created folder (Outbox) Area mail Template Deco-mail Decome-Anime Message Message R Message F Bookmark Bookmark Bookmark folder Screen memo Screen memo (i-mode Browser) Screen memo folder Numbe
Specific Absorption Rate (SAR) of Mobile Phone SAR Certification Information World Health Organization (WHO): http://www.who.int/peh-emf/ ICNIRP: http://www.icnirp.de/ MIC: http://www.tele.soumu.go.jp/e/ele/body/index.htm TELEC: http://www.telec.or.jp/ENG/Index_e.htm NTT DOCOMO: http://www.nttdocomo.co.jp/english/product/ Panasonic Mobile Communications Co., Ltd.: http://panasonic.
Appendix/Troubleshooting FCC RF Exposure Information THIS MODEL PHONE MEETS THE U.S. GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone contains a radio transmitter and receiver. Your phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
Intellectual Property Right Copyrights and Portrait Rights You have no right to copy, modify, or distribute the contents such as text, images, music, or software programs downloaded from websites on the Internet, or images shot by the cameras of this product without permission from the copyright holder except for when the copy or quote is for personal use that is allowed by the copyright law. Note that it may be prohibited to shoot or record live performances or exhibitions even for personal use.
Appendix/Troubleshooting FeliCa is a contactless IC card technology developed by Sony Corporation. FeliCa is a registered trademark of Sony Corporation. “CROSS YOU” is a trademark of Sony Corporation. Google and Google Map for Mobile are trademarks of Google Inc. This product contains software licensed complying with GNU General Public License (GPL), GNU Lesser General Public License (LGPL), etc. For more details, see “readme.txt” in the “GPL・LGPL等について” folder on the bundled CD-ROM. (“readme.
MEMO 531
MEMO 532
MEMO 533
MEMO 534
MEMO 535
MEMO 536
MEMO 537
538
Index/Quick Manual Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Index How to refer to Index The Index contains the terms and terminologies summarizing the descriptive contents by sorting in alphabetical order. If you cannot find the term or terminology you want to know, search for it using a different term or terminology. Index (A - C) Index/Quick Manual Software setting . . . . . . . . . . . . . . . . 289 Change melody/image. . . . . . . . . 290 i-αppli call . . . . . . . . . . . . .
Chara-den list . . . . . . . . . . . . . . . . .353 Chara-den player . . . . . . . . . . . . . .353 Chara-den recording display. . . . . .354 Chara-den setup . . . . . . . . . . . . . . . .72 Charge sound . . . . . . . . . . . . . . . . .105 Charging . . . . . . . . . . . . . . . . . . . . . .40 Charging terminal . . . . . . . . . . . . . . .23 Chat group . . . . . . . . . . . . . . . . . . .184 Chat group address confirmation display. . . . . . . . . . . . . . . . . . . . . . .184 Chat group list. . . . .
Index/Quick Manual Index (D - F) Decome-Anime . . . . . . . . . . . . . . . .148 Decome-Anime template list. . . . . .151 Delete attached file . . . . . . . . .153, 169 Delete backup data. . . . . . . . . . . . .368 Delete cookies . . . . . . . . . . . . . . . .212 Delete data . . . . . . . . . . . . . . . . . . . .98 Delete from PushTalk phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . .85 Description (Bluetooth function) . . .416 Desktop holder . . . . . . . . . . . . . . . . .
Forwarding guidance . . . . . . . . . . . 437 Forwarding image . . . . . . . . . . . . . 378 Frame . . . . . . . . . . . . . . . . . . . 196, 340 Full browser . . . . . . . . . . . . . . . . . . 192 Full browser home setting . . . . . . . 210 Full display setting . . . . . . . . . . . . . 210 Fullsong ring tone. . . . . . . . . . . . . . 280 Function list . . . . . . . . . . . . . . . . . . 466 Function menu . . . . . . . . . . . . . . . . . 35 ◆◇◆ G ◆◇◆ ◆◇◆ H ◆◇◆ I ◆◇◆ i-motion list . . . . . . . .
i-Widget . . . . . . . . . . . . . . . . . . . . .306 i-Widget display . . . . . . . .32, 306, 307 i-Widget roaming setting . . . . . . . . .307 i-Widget sound effect . . . . . . . . . . .307 ◆◇◆ J ◆◇◆ JAN code . . . . . . . . . . . . . . . . . . . .241 Japanese display . . . . . . . . . . . . . . .44 J-E/J-C speech translation for P . . .293 ◆◇◆ K ◆◇◆ Listening (Music&Video channel) . . . . . . . . . . . . . . . . . . . . . . . . . . 271 Listening (Video) . . . . . . . . . . . . . . .
Multiwindow . . . . . . . . . . . . . . 195, 253 Music folder list . . . . . . . . . . . . . . . 276 Music info . . . . . . . . . . . . . . . . . . . . 280 Music list . . . . . . . . . . . . . . . . . . . . 275 Music list of a playlist . . . . . . . . . . . 283 MUSIC player . . . . . . . . . . . . . . . . . 274 MUSIC player autostart (Bluetooth function) . . . . . . . . . . . . 420 MUSIC player playback display . . . 276 Music&Video channel. . . . . . . . . . . 266 Music&Video channel display . . . .
Index/Quick Manual Index (P - S) Nuisance call prevention . . . . . . .140 Ring tone. . . . . . . . . . . . . . . . . . .103 Substitute image . . . . . . . . . . .72, 73 Vibrator . . . . . . . . . . . . . . . . . . . .104 Private menu . . . . . . . . . . . . . . . . .403 Private menu list . . . . . . . . . . . . . . .403 Private menu setting . . . . . . . . . . . .403 Professor Layton and pandora’s box . . . . . . . . . . . . . . . . . . . . . . . . .292 Program folder list . . . . . . . . . . . . .
SMS center setting . . . . . . . . . . . . .188 SMS composition display . . . . . . . .185 SMS input character . . . . . . . . . . . .188 SMS report request. . . . . . . . . . . . .187 SMS settings. . . . . . . . . . . . . . . . . .187 SMS validity period . . . . . . . . . . . . .187 Software info . . . . . . . . . . . . . . . . . .290 Software list . . . . . . . . . . . . . . . . . .287 Software setting . . . . . . . . . . . . . . .289 Change melody/image . . . . . . . .290 i-αppli call . . . . . . . . . .
Index/Quick Manual Index (T - Numerics) Title name . . . . . . . . . . . . . . . . . . . .337 ToDo . . . . . . . . . . . . . . . . . . . . . . . .401 ToruCa . . . . . . . . . . . . . . . . . . . . . .312 ToruCa file list. . . . . . . . . . . . . . . . .316 ToruCa folder list . . . . . . . . . . . . . .314 ToruCa from dataBC . . . . . . . . . . .319 ToruCa settings . . . . . . . . . . . . . . .319 ToruCa viewer . . . . . . . . . . . . . . . .314 Total calls . . . . . . . . . . . . . . . . . . . .
Index/Quick Manual 549
Quick Manual How to Use Quick Manual Cut out Quick Manual interleaved into this manual along the cutout line, and then fold it as shown below: Take Quick Manual “For Overseas Use” with you for using an international roaming service (WORLD WING) overseas. ■How to cut Cut out Quick Manual along the cutout line. You can cut it out by placing a ruler on the cutout line. Be careful not to cut yourself when using scissors.
P-08A Quick Manual General inquiries 0120-005-250 (toll free) Service available in English, Portuguese, Chinese, Spanish, and Korean. ★ Available from mobile phones and PHSs. ★ ■ From DOCOMO mobile phones (In Japanese only) (No prefix) 151 (toll free) ★ Unavailable from land-line phones, etc. ■ From land-line phones Storing in Phonebook (FOMA terminal) Xo(for at least one second)→Phone Enter a name. →Edit a reading.
■Line Feed Press a. Enter “タダの菓子” in a Text Memo ■Entering a Space i→Pictograms/symbols→Space ■Deleting Characters Use Mo to move the cursor→r ■Bringing up the Character Entry (Edit) display m→Stationery→Text memo →Select →Press l a few times to switch to Kanji/Hiragana input mode. ■Entering Hiragana characters た→Press 4 once and Vo once. だ→Press 4 once and a once. の→Press 5 five times. か→Press 2 once.
i-mode Mail Attach Files Compose and Send i-mode Mail Address field Subject field Attachment field Text field l→l Receive i-mode Mail ■Picture/Melody/imotion/ToruCa/PDF/ Phonebook/Schedule/ToDo/Bookmark/ Document/Other Call up the Message Composition display →Select the attachment field →Select a file type to be attached →Select a folder→Select a file. Selecting methods differ depending on the file.
Set./ Service Backlight View blind 86 Color theme setting Machi-chara 57 Menu icon setting 52 Private menu setting 63 Desktop icon Key guidance 66 Font Font size setting 15 Select language Recv.mail/call at open Image quality LCD AI 36 Icons Illumination All illum. setting 89 Incoming illumination Illumination in talk Missed/unread illum. Music&Video Ch illum. Slide illumination Hourly illumination MUSIC illumination Bluetooth illumination IC card illumination PushTalk illumination Speed selector illum.
Set./ Service 23 46 16 Data box 79 LifeKit Check settings Reset settings Initialize Software update My picture MUSIC Music&Video Channel imotion/Movie Melody My documents Kisekae Tool Machi-chara Chara-den 1Seg Document viewer SD other files Bar code reader Receive Ir data microSD Camera Bluetooth 24 ■Public Mode (Drive Mode) a(for at least one second) ■Manner Mode s(for at least one second) LifeKit 55 i-concier Phonebook 24 0 26 Stationery 44 45 95 42 85 Map/GPS Rec.
■Deactivating m→Set./Service→NW services →Call forwarding→Deactivate→YES Services Available for the FOMA Terminal Available service Directory assistance service (Charges apply: guidance fee + call fee) ※Listed phone numbers only can be given.
P-08A Failures encountered overseas Quick Manual “For Overseas Use” (available 24 hours a day) Loss or theft of FOMA terminal or payment of cumulative cost overseas (available 24 hours a day) From DOCOMO mobile phones International call access code -81-3-5366-3114* for the country you stay (Table 1) (toll free) * You are charged a call fee to Japan when calling from a land-line phone, etc.
Setting a Telecommunication Carrier to Preferentially Connect to Display Making/Receiving a Call The type of network you are using is displayed. m→Set./Service→Network setting →Int’l roaming→PLMN setting→i →PLMN list select→Select a carrier→Oo →Select a network type→l→YES Displaying a Carrier Name on the Stand-by Display m→Set.
Country/Area Codes for Major Countries Use the following country/area codes when you make international calls or when you set Int’l Dial Assist.
Access code Service area Access code 00 United Kingdom 00 Poland 00 United States of America 011 Portugal 00 Vietnam 00 International Prefix Numbers for the Universal Number (Table 2) International prefix number Service area Russia 810 Argentina 00 Singapore 001 Australia 0011 South Korea 001 Austria 00 00 00 Belgium Sweden 00 Brazil 0021 Switzerland 00 Bulgaria 00 Taiwan 002 Canada 011 Spain Thailand 001 Turkey 00 United Arab Emirates 00 18 009 Denmark 00
Access the online for checking or changing the content of your subscription, for application of respective services, and for request of Information materials. From i-mode From PC ｉMenu お客様サポート (User support) お申込・お手続き (Applications/Procedures) Packet communication charges free (Respective applications/procedures) My docomo (http://www.mydocomo.com/) • You will need your “network ID” for the access from i-mode. • No packet communication charges are incurred for the access from i-mode.
General inquiries Repairs ■From DOCOMO mobile phones (In Japanese only) 0120-005-250 (toll free) ★ ★ Service available in English, Portuguese, Chinese, Spanish, and Korean. Available from mobile phones and PHSs. ■From DOCOMO mobile phones (In Japanese only) Unavailable from land-line phones, etc.
