Information Setting How Ticker is Displayed 1 i1i-Channel1Do the following operations. Channel list Ticker ON/OFF Ticker color set. Reset i-Channel ). Press r You can initialize the ticker information and set “Ticker ON/OFF” to “ON”. 1Enter your Terminal Security Code1YES Information ≥You can perform “Ticker ON/OFF”, “Ticker font size set.”, “Ticker color set.”, “Ticker scroll speed”, and “Reset i-Channel” for each mode of 2in1. However, i-Channel information is initialized for all modes.
i-mode/i-motion/i-Channel/i-concier ■Before Using i-concier ≥i-concier is a pay service which is available on a subscription basis (You need to subscribe to i-mode to apply for i-concier). ≥If you have not subscribed to Data Security Service (see page 136) but will newly subscribe to i-concier, you will subscribe to Data Security Service as well as i-concier. ≥There are two kinds of information; one is sponsored by DOCOMO and the other is by IPs (Information Providers).
Configuring i-concier Settings 1 i-concier display1l(MENU)1設定 (Settings) 1Do the following operations. iコンシェルとは You can display the explanation about i-concier. (What is i-concier?) インフォメーション You can set the contents of received information, etc. 受信設定 (Information receive settings) その他共通設定 (Other common settings) i-mode/i-motion/i-Channel/i-concier 自動お預かり/更新 See page 137. 設定 (Automatic saving/ Update settings) You can change the profile or perform setting for overseas use, etc.
214
Full Browser/PC Movie Displaying Web Pages Designed for PC . . . . . Setting Full Browser . . . . . . . . . . . . . PC Movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Downloading PC Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Playing PC Movies from Data Box . . . . . . .
Displaying Web Pages Designed for PC Full Browser/PC Movie You can browse Internet web pages designed for PCs using the Full Browser function. You can display even the Internet web pages that cannot be correctly displayed by i-mode. However, you cannot display or correctly display some Internet web pages. ≥The data such as Home URL or Bookmarks registered via Full Browser cannot be used via i-mode. The contents set by Full Browser are invalid for i-mode, either.
■Operations for the Full Browser display Key operation Operation Return to previous page Phone Mode PC Mode Co or 1 1. After you press Oo in Drag Mode to switch the pointer to “ content. 1 (Co is not available while a pointer is displayed.) Forward to next page Vo or 3 Bo Information ≥The feasible operation differs depending on the content. ≥In Drag Mode, you can operate the contents only.
Use Operation Mode Display a Page Composed of Frames Press l( ) from the Full Browser display to switch to “Operation mode”. The operation palette is displayed in Operation Mode, and you can move to the previous/next page or enlarge/reduce the display size. No: Moves to the previous/next page. Bo: Enlarges/reduces the display size. ≥When you press i( ) in Operation Mode, the key operation guide is displayed. You can display Internet web pages composed of frames.
Function Menu of Full Browser Display Home Change disp. mode See page 217. CHG wide scr. mode/ RLS wide scr. mode You can switch vertical display and horizontal display. See page 220. Display home You can display the Internet web page set as Home URL. Set full display Set as home URL You can set the displayed Internet web page as Home URL. 1YES Pointer/scroll Bookmark Bookmark Add bookmark Enter URL See page 196. You can enter a URL to display an Internet web page. 1Select a text box.
Certificate See page 193. Display Mode setting See page 217. Retry You can play back the displayed animation from the beginning. Set full display You can set whether to display the Full Browser display in full display. 1ON or OFF Key guide You can display the guide of key operation of Full Browser display. Display pointer ≥The number of characters of the URL you can paste to the text is up to 512 half-pitch characters.
Sound effect setting You can set the sound volume of effect tones or sounds of the Flash movies included in Internet web pages. 1Select a sound volume level. Reset last URL You can erase the URL of the Internet web page you viewed last. 1YES Auto NW trans. You can set whether to communicate when the transmission is made automatically while displaying Internet web page. 1Select an item. YES . . . .Communicates automatically. NO . . . . .Does not communicate automatically. Notify . . .
Setting Cookie By using cookies, you can effectively access the Internet web pages you have accessed once. A cookie is the system to temporarily save personal information such as the date/time or number of times you accessed an Internet web page. The information from the server is written into the FOMA terminal, temporarily saved, and used for content services. ≥If a cookie is sent, the information such as the date/time or number of times you accessed an Internet web page is also sent to the web page.
PC Movie Downloading PC Movies By using high speed communication, you can play back smooth and high-quality PC movies provided by portal sites, movie specialty sites and other sites on the Internet. ≥PC Movie Player supports playback of Windows Media® Video. ≥When downloading or streaming a PC movie, you might receive a bulky size of file. Note that you are charged a high packet communication fee for a bulky sent/received file such as a streaming type file whose size is not limited.
Playing Back a Download Type of PC Movie Select a PC movie from a PC movie obtainable site 1YES 1 See page 225 for the operation during playback. ≥If “PC Movie auto-play” is set to “ON”, a PC movie is played back during obtaining. If “OFF” is set, you can play it back by selecting “Play” from the data acquisition completion display.
Operation Playing PC Movies from Data Box You can play back movies published on the Internet for personal computers or PC movies saved to the microSD card via a personal computer, etc. ≥You can play back the sound of movies in stereo sound by connecting to a stereo earphone (option). Also, you can play back the sound wirelessly by using a commercial Bluetooth device.
You can perform the following operations during playback or pause of a PC movie by using the switch of an earphone/microphone (option). Operation Pause Play back next file Play back previous file ■Icons on the PC Movie list Icon File format Switch operation WMV, ASF Press once. ≥To play back, press again. Press twice in succession. Press three times in succession. ≥When playback time is over three seconds, you go back to the beginning of the file.
When you select “Played history” from the PC Movie Type Selection display When you play back a PC movie, the URL or storage location of that file is stored as a history. Up to 30 histories are stored, and when those are exceeded, the oldest history is overwritten. Select a played history to play back the PC movie according to the history information. ≥When a PC movie stored in a played history has been Played History list deleted or moved to another folder, you cannot play it back.
Rewind The PC movie is played back fast in the opposite direction. ≥To cancel it, press l( ). Stop You can end playback. Position to play You can set the start position for playing back the PC movie. 1Use No to move the cursor position of the time bar and press Oo( Copy URL While playing back a PC movie published on the Internet, you can copy the URL of that PC movie. ≥You can copy up to 512 half-pitch characters for the URL.
Camera Before Using Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Shooting Still Images . . . . . . . . . . . . . . . . Shooting Movies . . . . . . . . . . . . . . . . . . . . . . . . Changing Settings for Shooting . . . . . . . . . . . . . . . . . . . . . . . . . Setting Image Size and Image Quality . . . . . . . . . . . . . . . . . . . . Using Bar Code Reader . . . . . . . . . . . . . . .
Before Using Camera Camera Notes for when Shooting Images ・Check the lens for any stain before shooting. If the lens is stained, clean the lens with a soft cloth. If the lens is stained with fingerprints or something oily, you will not be able to focus on a subject, or the stains are reflected on still images or movies you shoot. ・Make sure that you do not let fingers, hairs, or the strap overlap the lens when shooting.
■Operations for shooting Information Icon menu operation※1 +l Brightness -1 Function menu access※2 +i White balance -2 Bar code reader※2 +m Photo mode -3 * Oo .p(fully) Image quality -4 Image size -5 High sensitivity (when the outside camera is used) -6 Auto timer※5 -7 Store in※6 -9 Switch cameras※7 -d Shutter/Save TELE *Vo WIDE *Co Settings for Focus (when the outside camera is used) *Zo Focus function *Xo (when the outside camera is .p(halfway) used) +c Icons※5 .
Icon/bar name 3 Number of recordable image Icon — Memory capacity bar 4File size setting Description Page Number of remaining recordable still images Up to 999 images are displayed. — Memory usage state (estimate) in Movie mode Displayed in red when the memory space reaches maximum. — Icon/bar name ? Number of frames for continuous shooting Auto timer @Photo mode Camera Auto 6Shooting status During movie recording 7Movie type set Records only the video.
Icon Description 5M (1944 x 2592) / 3.7M Wide (1456 x 2592) / 3M (1536 x 2048) / 2M Wide (1080 x 1920) / / / / / Image size (Movie mode) Shooting Still Images ≥See page 344 for how to display saved still images. Shoot a Still Image Press c.
3 Press Oo( ) or p. 2 The still image you shot is saved to the “Camera” folder of “My picture” in the FOMA terminal or to the microSD card. ≥See “Store in” and “Select storage” for selecting a storage location. ≥To save the still image as an mirrored image (horizontally reversed), press i( ) and select “Mirror save”. ≥Press r to cancel the shot still image and return to the Finder display. Post View display Continuous Shooting Camera You can continuously shoot still images.
To select multiple still images and save them Put a check mark for still images to be saved 1l( )1Save or Mirror save ≥If you highlight a still image and press Oo( ) or p, “ ” is added. Perform the same operation again to release the selection. ≥When the FOMA terminal is closed, put a check mark for still images to be saved and press i. In this case, you cannot save the still images as mirrored images. Function Menu of the Post View Display in Photo Mode/ Detailed Display in Continuous Mode See page 234.
Icon See page 242. Cancel You do not save the shot still image. Function Menu of the Post View Display in Continuous Mode Camera Save See page 235. Store all/animat’n You can save all the shot still images to store as an original animation. 1Save or Mirror save1 Store in See page 241. Normal display/ Mirror display You can switch between a correct image and a mirrored image (horizontally reversed). File restriction See page 243. Cancel You do not save the shot still images.
4 Press Oo( ) or p. Information ≥When you switch the subject you are shooting to a subject with a difference in perspective, it takes time to focus on the new subject. ≥When you have difficulty focusing on a subject, switch to another subject. Then the subject might come into focus. ≥The operating speed of focusing is slowed down in a dark place. The movie you shot is saved to the “Camera” folder of “imotion” in the FOMA terminal or to the microSD card.
Changing Settings for Shooting Camera mode You can set the camera when shooting images. VGA (640 x 480) HVGA Wide (640 x 352) Use Zoom You can display the image through the camera in “WIDE” or “TELE”. The maximum magnification for each size is as follows: ■Outside camera Camera Camera mode Photo (High sensitiv.: OFF) Photo (High sensitiv.: ON) Continuous Size 5M (1944 x 2592) 3.
1 Finder display1Use No to adjust the magnification. Information ≥The image quality may slightly change when you select “WIDE” or “TELE”. ≥“TELE” is released in the following cases: ・When you press -h to end the camera ・When a size is changed ・When camera mode is switched Use Focus Function You can shoot with the outside camera which focuses on a subject. 1 Finder display1Xo or p(halfway) When a subject is focused, a confirmation tone sounds, the frame becomes green, and the focus is locked.
Setting Image Size and Image Quality Camera Function Menu of the Finder Display Inside camera/ Outside camera You can switch between the inside camera and outside camera. CHG camera-mode 1Select a mode. ≥When you select “Continuous mode”, the camera starts in the mode you used last time, “Auto”, “Manual”, or “Auto bracket”. Image size 1Select an image size. File size setting [Movie Mode only] 1Select an item. Mail restrict’n (S). . . You can shoot up to 500 Kbytes. Mail restrict’n (L) . . .
Focus At Camera start-up Photo Mode: Face detection Continuous/ Movie Mode: Auto You can set the focus of the outside camera. 1Select an item. Face detection . . . For focusing on a person’s face Auto . . . . . . . . . . . . For focusing automatically before shooting (See page 239) Close-up . . . . . . . . For focusing on a subject in a short distance Landscape . . . . . . For focusing on a landscape in a long distance ≥“Face detection” is available only in Photo Mode.
Display size You can set whether to display a still image or movie in the original size (Actual size) or to fit to the screen size on the Finder display. 1Actual size or Fit in display Common replay mode You can set a shooting size appropriate for attaching to [Movie Mode only] i-mode mail. 1YES ≥Image Size is set to “QCIF”, File Size Setting is set to “Mail restrict’n (S)”, and Image Quality (Movie Mode) is set to “Normal”. Icon You can set whether to display icons.
Information File Restriction You can set the file restrictions for when you save the shot still image or movie. The operation of attaching to i-mode mail is disabled at the receiving end who has received the image as the first distribution.
Auto Timer At Camera start-up 1 OFF Finder display1i( )1Auto timer1ON or OFF 1Enter a delay time (seconds). ≥Enter from “01” through “15”, in two digits. When Auto Timer is set to “ON” Camera “ ” appears on the Finder display. If you press Oo( ) or p, a confirmation tone sounds and “ ” blinks. The photo light flickers every about 1 second until about 5 seconds before shooting. From about 5 seconds before shooting, the photo light flickers every about 0.
■CODE 128 CODE 128 is a bar code that denotes 128 characters of ASCII code (numerals, alphabets, symbols, etc.) with the vertical bars of different widths. ≥Download the i-αppli program which supports CODE 128, and then scan the above code. “NTT DOCOMO” is displayed. Press Oo( 4 i( Scan a Code At Bar Code Reader start-up Photo light: OFF Brightness: ±0 Zoom: Magnified view You can store up to 5 scanned codes. You can scan up to 16 divided QR codes.
Save image You can save the scanned image data to set to the Stand-by display or other displays. 1Select a destination folder. Go to step 3 on page 199. ≥See page 201 when images are stored to the maximum. Save melody You can save the scanned melody data to set it as a ring tone or other tones. 1YES1Select a destination folder. Go to step 3 on page 201. ≥Select “ ” to play back the melody. ≥See page 201 when melodies are stored to the maximum.
Information ≥The file name for the saved melody is “melodyXXX” (XXX are numerals). ≥For the melody with no title, the file name is displayed as the title. ≥When playing back the melody, it is played back at the sound volume set for “Phone” of “Ring volume”. Display the Saved Data List m1LifeKit1Bar code reader 1Saved data 1 The titles for stored data are displayed from the latest one. ≥Select a title to show the Scanned Code Result display.
248
1Seg 1Seg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Before Using 1Seg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting Channels . . . . . . . . . . . . . . . . . . . . . Watching 1Seg . . . . . . . . . . . . . . . . . . . . . . . . . Using i-αppli Program Guide. . . . . . . Using Data Broadcasting . . . . . . . . . . . . Using TV Link . . . . . . .
1Seg 1Seg 1Seg is the terrestrial digital TV broadcasting service for mobile objects, and it broadcasts data as well as video and audio. Further, by using i-mode, you can obtain the detailed information, can participate in quiz programs or can have fun with TV shopping. For details on the 1Seg service, browse to the web page as follows: The Association for Promotion of Digital Broadcasting From personal computers: http://www.dpa.or.jp/english/ From i-mode: http://www.dpa.or.
Before Using 1Seg How to Watch a 1Seg Program When you watch a 1Seg program for the first time 1 Channel Setting Store the channel list for the area you use. (See page 252) 2 Activating 1Seg Extend the 1Seg antenna, and activate 1Seg. (See page 253) ■1Seg antenna When you watch a 1Seg program, fully extend the 1Seg antenna. ≥When you change the direction of the 1Seg antenna, do not force it. Change the direction without applying pressure. Retract it straight until it is held back.
■Important Note that we cannot be held responsible for loss or changes of the saved contents due to a malfunction, repair, or other mishandling of the FOMA terminal. Furthermore, we cannot move the saved information (such as still images, TV links, or information saved to the broadcasting storage area) when you change your FOMA terminal or have it repaired. Setting Channels To watch 1Seg programs, you need to execute Channel Setting and to select a channel list in advance.
Delete Select Channel List You can select a channel list to set the broadcasting stations you receive. Also, you can edit the channel list already stored. 1 m11Seg1Channel list1Select a channel list. The channel list you receive Remote-control number is set, and the detailed display appears. ≥Select a broadcasting station to watch a 1Seg program. ≥When you select “Disp.Ch.
■About Viewer display (When “Switch display” is “V. img+Caption+DBC”.) ; < = 1 2 < ; > 3 1 2 4 5 6 78 9 : 1Seg Vertical display 5678 9 : Horizontal display Guide display 1Video “ ” appears on the upper right of the display when the data broadcasting linked with a 1Seg program is found while you are watching on the horizontal display or in the multiwindow. 2Caption You can set display position of the caption on the horizontal display by “Caption posit. in w-scr”.
Operation Key operation Start i-αppli program guide l( Program info l(for at least one second) Program info (outline) d Switch display d while displaying program information (outline) )※2 ≥Each time of pressing from the horizontal display switches the setting of “Icon” and “Caption posit. in w-scr”. Switch display directions/ Full display c ≥In Video Mode, each time of pressing switches the display directions.
Reload contents You can reload the data broadcasting site being displayed. ≥The confirmation display appears asking whether to re-send the data you entered, depending on the site. Certificate See page 193. Set image display See page 204. Sound effect See page 267. ToruCa from dataBC See page 323. Reset settings See page 267. TVlink list Compose message You can display the TVlink list. (See page 259) See page 257. Switch display At 1Seg start-up When “Caption” is set to “ON”: V.
Information ≥In the following cases, the Off Timer confirmation display appears after each operation finishes: ・In standby state for Timer Recording ・While being recorded by Timer Recording ・While a still image is being saved ・When an unsaved image is left ・During channel search by Auto Channel Setting Send i-mode Mail while Watching You can compose and send i-mode mail messages while watching a 1Seg program.
Information ≥Even if “Mail ticker display” is set to “Sender+subject”, the titles are not displayed for Messages R/F, i-mode mail messages, and SMS messages received from the parties not stored in the Phonebook. ≥Even when you show the detailed Received Mail display by Multitask while you are watching a 1Seg program, the display appears in the multiwindow.
Information ≥While the data broadcasting or data broadcasting site is displayed, the confirmation display might appear asking whether to send the contents you entered on the site or whether to permit obtaining mobile phone information. ≥When you select “YES (default)” from the confirmation display for data broadcasting, the information on data broadcasting might be automatically updated, and you might be charged a packet communication fee while watching a 1Seg program or playing back a video.
■Icons in the TVlink list Icon Record Video Format Description Memo information Displays memo information. Link communication contents Connects to the data broadcasting site. (Video and caption are not displayed.) i-mode contents Connects to the i-mode site. Full Browser contents Connects via Full Browser. The recorded video is saved to the microSD card (“Data box”→“1Seg”→“Video”). ≥See page 358 for playing back the recorded video. ≥You cannot save the recorded video to the FOMA terminal.
Information Record Still Images The recorded still images are saved to your FOMA terminal (“Data box”→ “1Seg”→“Image” folder). You can save up to 3,500 files in total sharing the memory space with other data files, however, the number of files you can save decreases depending on the data volume. (See page 535) ≥See page 344 for displaying the recorded still image files. ≥You cannot save still images to the microSD card. 1 Viewer display1p The confirmation tone sounds, and the still image is saved.
Repeat 1Select a type of repeat. ≥If you select “Select day”, put a check mark for days of the week to be set and press l( ). ≥The item set with repetition is counted as one item. Alarm 1Select an alarm method. ON. . . . . . . . . . . .Alerts you at the time set for the start date/time comes. The setting for alarm notification is completed. ON/Set time . . . .Alerts you at the time set as the prenotification. OFF. . . . . . . . . . .Does not alert. The setting for alarm notification is completed.
Repeat 1Select a type of repeat. ≥If you select “Select day”, put a check mark for days of the week to be set and press l( ). ≥The item set with repetition is counted as one item. You can set whether to sound alarm at the specified time of timer alarm. 1ON or OFF Volume 1Use Bo to adjust the volume. ≥You cannot set the volume to “Step”. Priority You can set a recording operation for when the start date/time arrives while operating a function which cannot be started up simultaneously.
Information ≥“ ” appears on the viewer display during recording by Timer Recording. ≥The audio from a 1Seg program is not output during recording started by Timer Recording. You can output the audio by pressing -r or adjusting the sound volume, however. 1Seg Function Menu while the TV Timer List or the Timer Recording List is Displayed New Go to step 1 of “TV Timer List” on page 261 for TV Timer. Go to step 1 on page 262 for Timer Recording.
Information ≥When you set “Alarm setting” to “Alarm preferred” for the setting of TV Timer/Timer Recording and the alarm time comes while you are dialing, the alarm sounds after you call up the other party. When the alarm time comes while ringing, the alarm sounds after you start talking.
Recording Result Mail ticker display You can display up to 20 recording results from the latest one. 1 m11Seg1Recording result 1Select a recording result. ≥To delete all recording results, press i( ), enter your Terminal Security Code, and select “YES”. Setting 1Seg 1 m11Seg1User settings 1Do the following operations. 1Seg Display Caption You can set whether to display the caption for when watching starts. 1ON or OFF Caption posit.
Listening Equalizer You can set the effect of the sound from an earphone or Bluetooth device. 1Select an item. Surround. . . Makes the sound natural and stereophonic. Natur 1/2 . . . Complements the cooped-up feeling specific to earphones and plays back natural sound. Select 1 or 2 according to your taste. OFF . . . . . . . Sets Listening to “OFF”. ECO mode You can change the quality of the sound from an earphone or Bluetooth device. 1Select an item. Normal. . . . . Reproduces normal sound quality. H.
1Seg Information ≥The guide display might appear even if “Icon” is set to “OFF” when the airwave conditions have got worse. ≥When you set to “ON”, you might not be able to have enough effects of “Image quality”. ≥Mobile W-Speed becomes invalid during ECO mode, displaying in the multiwindow, or AV output. ≥Depending on the broadcast state, you might not be able to have the effects of Mobile W-Speed.
Music Music&Video Channel Music&Video Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Playing/Operating Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . 270 270 272 MUSIC Player Playing Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Saving Music Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Music Music&Video Channel Setting Programs Music&Video Channel is a service which automatically delivers up to about one-hour programs at night by just setting your favorite music programs in advance. Further, you can enjoy high-quality movie program of up to about 30 minutes. Programs are updated periodically and you can enjoy the delivered programs at your convenient time such as on commuting.
Information Obtain a Program Manually “ ” appears on the Stand-by display when the automatic program obtaining fails or the program is not updated even after the program distribution date. When the automatic obtaining fails, you can manually obtain the program. 1 Music&Video Channel display1Select a program1YES ≥For a partially obtained program, select “Play” to play it back. ≥For a program which has not been updated, select “Play” to play it back. ≥See page 201 when data files are stored to the maximum.
Playing/Operating Programs ≥You can enjoy playing back programs in stereo sound by connecting to a stereo earphone (option). Also, you can enjoy playing back programs wirelessly by using a commercial Bluetooth device. (See page 427) Music 1 m1MUSIC1Music&Video Channel 1Select a program. “ ” is displayed while Music&Video Channel is activated, and “ ” is displayed when the program shifts to pause state during Play Background.
:…Listening (No indication for “OFF”) : Surround : Natur1 : Natur2 ;…Remaster (No indication for “OFF”) : ON <…Icon of Bluetooth connection (No indication for not connected) : Being connected =…Sound volume ■Operation while playing back a Music&Video Channel program Operation Key operation Halt l( ) Pause Oo( ) or p ≥Oo( Sound volume adjustment Operation Equalizer ) or p to play back Bo or ※ You cannot operate during pause.
Music Information ≥The information of the previously played program is erased if you do the following operations: ・ When you turn on/off the FOMA terminal ・ When you update the program ・ When you delete or move the previously played program ≥If you try to play back a program with a low battery, the confirmation display appears asking whether to play it back. The battery alert tone sounds regardless of the setting of “Keypad sound”.
Equalizer Information ≥The playable mode setting is invalid for the programs having the time zone restrictions. ≥Even if you set to “Repeat”, the program is not played back repeatedly if it has no time zone restrictions but has restrictions on the number of playbacks. ≥You cannot move the program when its obtaining is not completed, or the move restriction or time zone restriction is set for the program.
Playing Music You can play back music files on your FOMA terminal by using MUSIC Player or i-motion player. ■MUSIC Player (See page 278) By “MUSIC Player” of “MUSIC”, you can play back Chaku-uta Full® music files or music files saved from music CDs to the microSD card via a personal computer. ≥You can display mail, i-mode sites, and so on, while listening to music by MUSIC Player (Play Background). See page 504 for the combination patterns that can be started.
Information ≥You can save up to 5 Mbytes per Chaku-uta Full® music file. ≥When the Uta-hodai music file set for the ring tone or alarm tone needs to be updated because the playable deadline has expired, the default tone sounds when a call comes in, or an alarm sounds/vibrates. ≥For a Chaku-uta Full® music file that has restrictions on the number of playbacks, playable period, or playable deadline, “ ” is displayed at the head of the title.
Save Music Files by Using SD-Audio By using SD-Jukebox (commercial item), you can save the music files on the music CDs to the microSD card as AAC format data. ≥By using the microSD card adapter (option), you can save music files to the microSD card directly from a personal computer as well. ※The following steps are an example for when the FOMA terminal is used as a microSD reader/writer for saving music files.
1 The Player Menu display appears. ≥When the information about the previously played music file remains, the playback starts according to the information about the position to play or about mode. 2 Player Menu display Select an item. All tracks. . . Displays all the music files saved on the FOMA terminal and microSD card. Artist . . . . . . Displays all the artist names. Highlight the name of the artist you want to listen to and press Oo( ), then all the album names of the selected artist are displayed.
3 Manage Folders or Music Files m1Data box1MUSIC 1 Music Folder list Music 2 Select an item. MUSIC Player. . . MUSIC Player starts. (See page 279) i-mode. . . . . . . . . Displays the i-mode (Chaku-uta Full®) Folder list. Select a folder. WMA . . . . . . . . . . Displays the WMA list. ≥Each time you press m from the i-mode (Chaku-uta Full®) Folder list, you can switch between the folders in the FOMA terminal and the microSD card.
■Operations of MUSIC Player in use Operation Halt Key operation l( ) ≥Oo( Pause Oo( ) or p to play back ) or p ≥Oo( ) or p to play back Sound volume adjustment Bo or Replay next file Vo or > (for at least one second) Replay previous file Co or < (for at least one second) ≥When playback time is over three seconds, no previous music file is found, and “Random” or “Random play&repeat” is set, you go back to the beginning of the file. Search (fast forward)※ Press and hold Vo.
■Icons on the Music list When you select a music file from “MUSIC→MUSIC Player”, the following icons are displayed: Icon Description ≥All Chaku-uta Full® music files are set with file restrictions. See page 243 for file restrictions. Icon ※ Stored in the FOMA terminal Acquired source Sites ※For the copyrighted file movable to the microSD card, “ ” is displayed.
Information ≥In the following cases, the playback pauses and resumes after you finish each operation: ・ When you make/receive a voice call, videophone call, or PushTalk call ・ When you receive a mail message or Message R/F while “Receiving display” is set to “Alarm preferred” or the Stand-by display is shown ・ When an alarm of “Alarm”, “Schedule”, “ToDo”, “TV timer” or “Timer recording” sounds Depending on the event which occurred, the confirmation display might appear asking whether to end MUSIC Player.
Set as ring tone Fullsong ring tone Point ring tone Music Music info Add to playlist You can set a full piece of Chaku-uta Full® music file as a ring tone. 1Select an item. ≥For a Chaku-uta Full® music file on the microSD card, the confirmation display appears asking whether to move it to the FOMA terminal. (See “Move Files from the microSD Card to the FOMA Terminal” on page 374.) You can set a part of Chaku-uta Full® music file as a ring tone. 1Select a range to be set1Select an item.
Display image Display lyric You can display jacket images stored in the music file. ≥When multiple jacket images are stored, press No to display a previous or next jacket image. ≥When the image is storable, press Oo( ) and select “YES”, then select any destination folder to save it. You can display lyric images stored in the Chaku-uta Full® music file. ≥When multiple lyric images are stored, press No to display a previous or next lyric image. You can display up to seven lyric images.
Music Equalizer You can change the quality of the sound from an earphone or Bluetooth device. 1Select an item. Normal . . . . .Reproduces normal sound quality. H.BASS1. . . .Enhances bass sound. H.BASS2. . . .Enhances bass sound more deeply than H.BASS1. Train . . . . . . .Minimizes abnormal sound that causes sound leakage. Music info See page 284. Connect to URL See page 284. Display image/ Display lyric/Player You can change the playback display. Display image . . .
Create Playlist Player Menu display1Playlist Function Menu of the Playlist List 1 Playlist list 2 i( )1Create playlist 1Select a type and display the Music list 1Put a check mark for music files to be stored 1l( ) ≥The music files are stored in the displayed order. 3 You can show the Player Menu display. Play mode setting See page 283. Create playlist See page 287. Copy playlist 1Enter a playlist name. ≥You can enter up to 18 full-pitch/36 half-pitch characters.
Function Menu of the Music List of a Playlist Player menu You can display the Player Menu display. ≥Playback state continues even when you show the Player Menu display. Play mode setting See page 283. Music info See page 284. Add See page 287. DEL from playlist You can release the music files from the FOMA playlist. 1Select a deleting method. DEL one from list . . . . . . You can release the music file. DEL some from list. . . . . Select the music files to be released, and press l( ).
i-αppli/i-Widget i-αppli . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Downloading i-αppli from Sites . . . . . . . . . Starting i-αppli . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting i-αppli . . . . . . . . . . . . . . . . . . . . . . . . Starting i-αppli Automatically . . . . . . . . . . . . . . . . . . . . . . . . . . . Using i-αppli Call . . . . . . . . . . . . . . . . . . . . . . . . . . . .
i-αppli “i-αppli” is a software program for i-mode mobile phones. You can use your FOMA terminal more conveniently by downloading※ various software programs from the i-mode site. For example, you can automatically update the stock price information or weather information, and enjoy games without accessing network.
Information Display Software Info You can display software information when downloading i-αppli. 1 m1i-αppli1iαppli settings1Disp. software info 1Display or Not display Starting i-αppli 1 i(for at least one second) 1Select a software program to be started. ≥On the Software list, the icons show the types of i-αppli programs and supported functions.
≥When you start an i-αppli DX program or while it is running, the confirmation display might appear asking whether to permit the i-αppli DX program to use the FOMA terminal’s information and functions. ≥When you start the Osaifu-Keitai compatible i-αppli program for the first time, the confirmation display appears asking whether to make the UIM and IC card compatible. The UIM information that has been made compatible is saved on the IC card as IC owner information.
Use Bar Code Reader You can use the camera to scan JAN codes, QR codes, and CODE 128 depending on the software program. When you start Bar Code Reader while an i-αppli program is running, the camera (Bar Code Reader) starts up. Put the code to be scanned within the guide frame and shoot. ≥You need to download CODE 128 compatible i-αppli program to scan CODE 128. ≥The scanned data file is used/saved by the i-αppli program.
i-αppli/i-Widget Change mld./img. You can set whether to permit the i-αppli program to change the setting for the ring tones, Stand-by display, etc. This function is available only for i-αppli DX programs. 1ON, OFF or Check every change1l( ) ≥If you select “Check every change”, the confirmation display appears each time the i-αppli program tries to change the setting for the ring tones, Stand-by display, etc. See P. book/hist.
When you delete an i-αppli program whose files are on the microSD card The confirmation display appears asking whether to delete files on the microSD card as well. YES . . . . . . Deletes both the software program and files on the microSD card. Press “YES” again on the confirmation display. You need to enter your Terminal Security Code to execute “Delete” or “Delete selected”. NO. . . . . . . Deletes the software program only and the files on the microSD card are left. Cancel . . . .
とっさの英語辞典 (Spur-of-the-moment English Dictionary) With the Spur-of-the-moment English conversation dictionary, you can check the English expressions used in your daily life or for overseas travel, or which is useful in business. Further, this is a comprehensive English dictionary that comes with “English-Japanese/Japanese-English dictionary of Gakken JISUPA” that enables you to check English words and Japanese phrases. You can also perform cross-reference between dictionaries.
5 Select a menu item. 日→英 翻訳 (Translate Japanese to English) . . . Starts translation from Japanese to English. 英→日 翻訳 (Translate English to Japanese) . . . Starts translation from English to Japanese. 日→中 翻訳 (Translate Japanese to Chinese) . . . Starts translation from Japanese to Chinese. 中→日 翻訳 (Translate Chinese to Japanese) . . . Starts translation from Chinese to Japanese. シーンを変更 (Change scene) . . . Select a scene suitable for words to be translated.
iD 設定アプリ (iD Setting Application) DCMXクレジットアプリ (DCMX Credit Application) i-αppli/i-Widget Chargeless electronic money “iD” is a service that enables you to do shopping by placing your Osaifu-Keitai or a credit card with “iD” mounted over a scanning device. You can do shopping easily and conveniently without signing. Depending on the card publishing company, cashing is also supported.
≥For service contents and details of subscriptions, refer to the i-mode site of DCMX (in Japanese only). ・i-mode site: iMenu→DCMX iD モバイルGoogleマップ (Mobile Google Map) QR code for accessing the site On the map, you can easily find out area information, shop information, and the contents created by users. You can switch to the aerial photo mode and view the map by Street View. You can also check the transportation to the destination by the line search.
モバイルSuica登録用iアプリ (Mobile Suica Setup i-αppli) i-αppli/i-Widget “モバイルSuica登録用iアプリ (Mobile Suica Setup i-αppli)” is the i-αppli program NTT DOCOMO provides for making initial settings required before you use the Osaifu-Keitai compatible service, “Mobile Suica”, offered by JR East. Make the initial settings on this application program, and follow the online instructions to download the Suica application from the JR East site and subscribe to it.
ファミリー伝言板 (Family Message Board) Family Message Board is an application program that enables you to share memos and schedule events among your family or friends. After registering to join a group, you can share the memos and schedule events with other members of the group. Further, you can check the memos and schedule events by using compatible TV. ≥You are separately charged a packet communication fee. ≥For details, press m(Explanation) from each display to show them.
楽オク☆アプリ (Rakuoku ☆ Application) 地図アプリ (Map Application) i-αppli/i-Widget “楽オク☆アプリ (Rakuoku ☆ Application)” enables you to easily exhibit your goods on Rakuoku whenever you want wherever you are. The instruction guides you through exhibition procedures, and you can make “体験出品 (trial entries)”, so you can use it easily even if you are a beginner.
マクドナルド トクするアプリ (McDonald’s TOKUSURU KEITAI application) You can quickly check the attractive information such as McDonald’s new products. You can download “かざすクーポ ン (Coupon for scanning)”, the discount coupon usable in McDonald’s shops. Before using “かざすクーポン (Coupon for scanning)”, you need to subscribe on “トクするケータイサイト (TOKUSURU KEITAI site)”. Then, select/set your favorite coupon from the application, and place it over a scanning device at a © 2008 McDonald’s McDonald’s shop.
株価アプリ (Stock Prices Application) i-αppli/i-Widget Type of index “株価アプリ (Stock Prices Application)” enables you to easily check stock prices (Nikkei225/TOPIX/ Hercules index) on i-Widget. The stock prices index you can check Chart are: Nikkei225, TOPIX, and Hercules Present index index. value You can check the present index value and its up/down from the day before. Change of index ※The display is for reference. You can switch the charts among “日中足 The actual one may differ.
Preferred tone αBacklight αVibrator Check settings You can set which sound to be output preferentially, from MUSIC/1Seg or i-αppli program, for when you start an i-αppli program during music playback or use of 1Seg. 1MUSIC/1Seg or iαppli You can set the backlight operation for when an i-αppli program is running. 1Select an item. Depend on system . . . . Follows the setting of “Backlight”. Depend on software . . . Follows the setting of each software program. Constant light. . . . . . . . .
Information ≥Software programs do not start automatically in the following cases: ・When the FOMA terminal is turned off ・When the date and time are not set ・When another function is working ・During Lock All ・During Personal Data Lock ・During playback of animations/Flash movies ・When the time set for automatic start is identical to the reserved time set for “Software update”, or the time set for an alarm of “Alarm”, “Schedule”, “ToDo”, “TV timer”, or “Timer recording” ・When a start time has been specified to
Check i-αppli Call Logs i-αppli Call Download Setting Up to 30 received i-αppli calls are recorded in i-αppli call logs, and you can check how they were replied. You can set whether to reject the i-αppli download notice for when a target i-αppli program for i-αppli calls is not found. ≥After 30 i-αppli calls are received, the older log is automatically deleted from the oldest one, but the logs for the held i-αppli calls are not deleted. (If 30 logs are all for the held calls, they are deleted.
Operating i-αppli Stand-by Display Software Setting (Stand-by Set) You can set an i-αppli program for the Stand-by display. Once set, the i-αppli Stand-by display automatically appears each time you show the Stand-by display. 1 Software list1i( )1Software setting 1Stand-by set1ON or OFF1l( ) “ ” is displayed for the software program set as the Stand-by display. “ ” or “ ” is displayed while an i-αppli Stand-by display is running.
End Stand-by Info When the i-αppli Stand-by display does not end successfully, you can check the date/time and its reason. 1 m1i-αppli1iαppli info1End stand-by info ≥When “ ” is displayed on the End Stand-by Info display, press i( ), and select “Copy info” to copy the information. Select “Delete info”, and select “YES” to delete the information. Displaying i-αppli Data Files on the microSD Card Depending on the i-αppli program, you can save its data files on the microSD card.
■About i-Widget display Using i-Widget 1 Start i-Widget After starting i-Widget, you can simultaneously start multiple Widget αppli programs. You can show the multiple running Widget αppli programs on the i-Widget display. 1 Press r. i-Widget starts. When any Widget αppli program is running, the i-Widget display is displayed. When no Widget αppli program is running, the Widget αppli list is displayed. ≥You can start i-Widget also by selecting a Widget αppli program from the Software list.
End i-Widget You can end i-Widget to return to the Stand-by display. 1 Widget αppli list/i-Widget display/Widget αppli operation display1h ≥You can return to the Stand-by display also by pressing r or m[戻る (Return)] from the i-Widget display. ≥For the Widget αppli operation display, the confirmation display appears asking whether to finish it. Starting Widget αppli 1 You can show the Widget αppli operation display.
312
Osaifu-Keitai/ToruCa Osaifu-Keitai . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iC Transfer Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Starting Osaifu-Keitai Compatible i-αppli . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Locking IC Card Function . . . . . . . . . . . . . . . . . Checking Owner Information of IC Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Osaifu-Keitai Osaifu-Keitai/ToruCa Osaifu-Keitai is the function that enables you to save points and tickets as well as bills and changes to the mobile phone. Osaifu-Keitai mounts the IC card, so you can make payment and others just by placing the FOMA terminal over the scanning device in a shop. Further, you can use communications to deposit electronic money or to check your account for balance or usage histories. Security is fully secure※1 so that you can make use with a sense of security.
Starting Osaifu-Keitai Compatible i-αppli Read and Write Data inside the IC Card You can start the Osaifu-Keitai compatible i-αppli from the Software list. By using Osaifu-Keitai compatible i-αppli, you can read/write the data inside the IC card and use convenient functions such as depositing electronic money or checking your account for the balance and usage details on the mobile phone.
Locking IC Card Function Checking Owner Information of IC Card To prevent the IC card function from being used by others, you can set the Osaifu-Keitai, received ToruCa, or iC communication disabled. You can check whether IC owner information required for using the IC card is consistent with the information of the currently inserted UIM. ≥If the battery runs out while IC Card Lock is set, the IC card stays locked. 1 1 Press and hold m for at least one second.
■Flow for using ToruCa Receiving ToruCa Receive from Scanning Device Place your Osaifu-Keitai over a scanning device to receive a ToruCa file. You can receive the ToruCa file from a scanning device using the IC card function. By receiving detailed information, a ToruCa file becomes a ToruCa file (details) which has more pieces of information.
About Auto-reading Function of ToruCa If you set “Auto reading ToruCa” to “Accept” to use the ToruCa files by placing the FOMA terminal over the scanning device, the available ToruCa files are automatically recognized. The used ToruCa files are converted into “Used” and then moved to the “Used ToruCa” folder. Up to 20 used ToruCa files are saved, and when the number of the files exceeds 20, the files are deleted from the one downloaded at the oldest date.
Search all folders Auto-sort You can search through all ToruCa files in the FOMA terminal (except ToruCa files stored in the “Used ToruCa” folder) by specifying a search condition. 1Select a search condition. Genre. . . .Select a genre. Press l( ) to display a list of category icons belonging to the genre. Title . . . . .Enter characters to be searched for, from those in the title. Index . . . .Enter characters to be searched for, from those in location data.
Information ≥“ ” is displayed when the Genre sort is set, “ ” is displayed when the Title sort is set, and “ ” is displayed when the Index sort is set. ≥When a file satisfies multiple conditions, it is sorted into the top of the folder in the ToruCa Folder list. ≥The ToruCa file (details) is copied as a ToruCa file before receiving details if it contains the data file with the UIM security or whose output from the FOMA terminal is prohibited.
Function Menu of the ToruCa File List/Detailed ToruCa File Display Attach to mail Move You can compose an i-mode mail message with the ToruCa file attached. Go to step 2 on page 142. ≥You can compose it also by pressing l( ). Connect to Center [List only] See page 136. ToruCa folders [List only] You can display the ToruCa folder list. ≥You can display it also by pressing c( Multiple-choice [List only] You can select multiple ToruCa files and operate them.
Retry You can play back an animation image or Flash movie in the [Detailed display only] ToruCa file from the beginning. ≥When a part of the Flash movie is outside the display area, the Flash movie might not be played back. Add to phonebook [Detailed display only] See page 92. Add desktop icon See page 31. Ir/ transmission Send Ir data transmission Memory info [List only] See page 384. See page 387. You can display the used memory space (estimate)/the number of saved files.
Setting ToruCa 1 m1Osaifu-Keitai1Settings 1Do the following operations. You can set whether to receive ToruCa file from a scanning device using the IC card function or from another FOMA terminal via iC transmission. 1Accept or Reject Auto reading ToruCa You can set whether to have the available ToruCa files automatically recognized for when you place the FOMA terminal over the scanning device. 1Accept or Reject Recv.
324
Map/GPS Function Using GPS Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Checking Your Location . . . . . . . . . . . . . . Using Map/GPS Compatible i-αppli . . . . . . . . . . . . . . . . . . . . . . Providing Location Information on Request . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Notifying Location Information. . . . . . . . . Displaying History of Checked Location Information . . . . .
Using GPS Function ≥GPS is operated by the United States Department of Defense, so the GPS radio wave conditions might be controlled (accuracy deterioration, radio wave supply suspension, etc.) depending on the defense strategy of the United States Department of Defense.
Function Menu while Current Location is Displayed Read map You can display a map by starting GPS compatible i-αppli program set by “Select map”. Map/GPS αppli You can use the location information on a GPS compatible i-αppli program. 1Select an i-αppli program. Paste to mail You can compose an i-mode mail message with the URL of the location information pasted to the text. 1YES Go to step 2 on page 142. ≥The URL of the location information to be sent is displayed on i-mode compatible phones only.
■Standard and optional services The standard and optional services are available with this software program. Standard service: Provided by DOCOMO (charge free). Optional service: Provided by ZENRIN DataCom (charged). You can use the optional services charge free except traffic information for up to 60 days from when you start this software program for the first time.
◆When 60 days have passed without registering yourself as a member At the first start-up on or after 61 days, the message telling that the functions you can use are limited, and the message that refers to the member registration appear. The same messages appear when you select an optional service menu. ※To register yourself as a member, access “ゼンリン 地 図+ナビ (ZENRIN/map+navi)” via this software program. Key operation Action r Can close the menu or return to the point retrieved by the first search.
◆Key operation when the Search Result display for area information is shown Key operation Action Oo Can show the quick access menu. Mo Can move the map up, down, left, and right. 1 Can display the previous 10 results. 3 Can display the next 10 results. 4 Can show the previous search result. 5 Can re-search the area centered on the displayed map. 6 Can show the next search result. l(TOP) Can show the TOP menu.