docomo STYLE series P-02A ISSUE DATE: ‘09.
DOCOMO W-CDMA・GSM/GPRS System Thank you for selecting the “docomo STYLE series P-02A”. Before or during use of the P-02A, make sure that you read this manual and the separate manuals for other optional devices thoroughly so that you can use the P-02A correctly. If you feel any inconvenience in reading the manual, contact the docomo Information Center listed on the back page of this manual. The P-02A is designed to be your close partner. Treat it carefully at all times to ensure long-term performance.
Easy Search/Contents/Precautions Viewing/Searching This Manual ≥The most operating procedures and displays in this manual are described with the default settings of the “Diamond Black” handset (see page 476). However, the following settings are changed. ・“Display setting” → “Stand-by display”: OFF ・“Display setting” → “Clock” → “Stand-by clock” → “Position”: Pattern 1 ・“Color theme setting”: White ・“Disp. call/receive No.
Easy Search/Contents/Precautions How to search for “Alarm” is explained here as an example of search method. From the Index Additional guidance . . . . . . . . . . 455 Address link function . . . . . . . . . . . 203 After-sales services . . . . . . . . . . . . 516 Alarm . . . . . . . . . . . . . . . . . . . . . . . 402 Alarm setting . . . . . . . . . . . . . . . . . 411 Answer setting . . . . . . . . . . . . . . . . . 64 Antenna . . . . . . . . . . . . . . . . . . . . . . 23 11P.
Menu number (See page 34) +m-4-4 Using Alarm You can set Alarm to alert you at the specified time with an alarm tone, animation and illumination. You can store up to twelve alarms. Operating procedure (See page 32) 1 m Stationery Alarm Highlight an alarm and press l( ) Do the following operations. Reference display (Characters and settings Alarm are for reference.) Chapter title You can search by chapter.
Easy Search/Contents/Precautions Easy Search To retrieve a desired function with simple words, refer to the following: To know convenient functions for making calls To change/know display settings To/Not to notify your phone number to the other party .................................................................................... To know the meaning of marks (icons) on the display .....................
Other things you can do To lock the FOMA terminal from away when it gets lost To reduce the battery consumption .............................. 113 ......................................................................................... ※1 125 To scan QR codes or bar codes ...................................... 244 To keep Phonebook entries from prying eyes ......................... 132 To listen to music.................................
Easy Search/Contents/Precautions Contents Viewing/Searching This Manual . . . . .1 Precautions. . . . . . . . . . . . . . . . . . . . . 10 Easy Search . . . . . . . . . . . . . . . . . . . . . .4 Handling Precautions . . . . . . . . . . . . 16 Contents . . . . . . . . . . . . . . . . . . . . . . . . .6 Accessories and Main Options . . . . 20 Mail 141 Main Functions of P-02A. . . . . . . . . . . .
289 Osaifu-Keitai/ ToruCa 313 Map/GPS Function 325 Data Management 341 Convenient Functions 399 Character Entry 429 i-αppli, i-αppli Download, i-αppli Run, iαppli Settings, Starting i-αppli Automatically, iαppli Call, i-αppli Stand-by Display, iαppli Data, i-Widget, Start Widget αppli Osaifu-Keitai, iC Transfer Service, IC Card Content, IC Card Lock, Check IC Owner, ToruCa, Receive ToruCa Files, ToruCa Viewer, ToruCa File List/Detailed ToruCa File Display, ToruCa Settings Using GPS Function, Position
Easy Search/Contents/Precautions Main Functions of P-02A ◆i-concier 11P.211 ◆1Seg 11P.250 i-concier is a service that enables you to receive useful information from a character (Machi-chara image) on the Stand-by display and download schedule event (i-schedule) files for your convenience. Downloaded i-schedule events or ToruCa files are automatically updated to the latest information, and the address information of shops/companies, etc. is automatically added to the Phonebook.
◆Yuttari Talk 11P.61 By the rotating operation, you can scroll displays and select items quickly. Further, in various situation, you can comfortably operate functions such as volume adjustment during music playback or during a call, and zoom adjustment for when shooting with the camera. You can slow down the other party’s speaking speed during a call. ◆Face Detection 11P.239 You can shoot still images adjusting the camera focus on person’s face automatically. ◆Swing Slide 11P.
Easy Search/Contents/Precautions Precautions ■The following symbols show specific directions: ALWAYS FOLLOW THESE DIRECTIONS ■Before using the FOMA terminal, read these safety precautions carefully so that you can use it correctly. After reading the precautions, keep them in a safe place. Denotes things not to do.
With your FOMA terminal, use the batteries and adapters/chargers specified by NTT DOCOMO, INC. Do Danger Don’t Do not use, store or leave the FOMA terminal and its accessories in places with a high temperature such as near fire or places exposed to direct sunlight, or in cars under the blazing sun. The devices could be deformed or malfunction, or the battery may leak, overheat, burst, or catch fire, thus resulting in the deterioration of performance and shortening of the life of devices.
Easy Search/Contents/Precautions Caution Don’t Precautions for FOMA terminal Warning Do not place the FOMA terminal or accessories on unstable locations such as wobbly tables or slanted locations. The FOMA terminal or accessories may fall, resulting in injury or malfunction. Do not directly point the infrared data port at someone’s eyes during transmission. Don’t Do not store in humid or dusty places, or in high temperature environments. Don’t Do Malfunction may result.
Do Do Those functions may cause an effect on the heart. If thunder starts to rumble while you are using the FOMA terminal outdoors, house the antenna, turn off the power and move to a safe place. Do not swing the FOMA terminal by its antenna or strap. Don’t Do The FOMA terminal may possibly cause these devices to malfunction.
Easy Search/Contents/Precautions Electronic devices in some types of cars can be affected by use of the FOMA terminal. Do Do For safety’s sake, make sure not to use the FOMA terminal inside such cars. Itching, rash or eczema may be caused depending on your physical conditions or predisposition. If an abnormality occurs, stop using the FOMA terminal immediately, and then seek medical attention.
Caution Don’t The battery may catch fire or damage the environment. After insulating the battery terminals with tape, take the unneeded battery to a handling counter such as a docomo shop or dispose of it in accordance with local waste disposal regulations. Don’t If it starts to thunder, do not touch the FOMA terminal and adapter/charger. Don’t Don’t Don’t Do If the battery fluid comes in contact with skin or clothes, immediately stop using, then rinse it out thoroughly with clean water.
Easy Search/Contents/Precautions Do When removing the adapter/ charger out of the outlet or cigarette lighter socket, do not forcibly pull the adapter/charger cord or power cord, instead take hold of the power plug and then pull. If you pull the plug out by the cord, the cord may be damaged, which could result in electric shock or fire.
■Use a dry soft cloth such as the one for cleaning glasses to clean the equipment. ■Occasionally clean the terminals of the equipment using a dry cotton swab. If the terminals become soiled, the connection might deteriorate so that the power turns off or the battery does not charge fully. Wipe the terminals with a dry cloth or cotton swab. ■Do not place the FOMA terminal near an air conditioner outlets.
Easy Search/Contents/Precautions ■Note the following points when you store a battery pack over a long period: ≥Storage in a fully charged state (the state immediately after charging is completed) ≥Storage with no battery power left (the state you cannot turn on the power of the handset due to battery drain) These may lower the battery pack’s performance and shorten its operating life.
2.4 FH 1 2.4 FH 1 : Indicates radio facilities that use 2400 MHz frequencies. : Indicates the modulation system is the FH-SS system. : Indicates that a supposed coverage distance is 10 meters or less. : Indicates that all radio frequencies 2400 MHz through 2483.5 MHz are used, and that the frequencies for mobile object identifiers shall not be avoided.
Easy Search/Contents/Precautions Accessories and Main Options ≥P-02A Handset (With Warranty and Back Cover P30) ≥P-02A CD-ROM The PDF versions of “Manual for PC Connection” and “Kuten Code List” are included.
Before Using the Handset Part Names and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Opening/Closing FOMA Terminal. . . . . . . . . . . . . . . . . . . . . . . . Navigation Displays and Key Operations . . . . . . . . . . . . . . . . . Main Key Operations from the Stand-by Display . . . . . . . . . . . Viewing Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using Icons on Desktop . . . . . . . . . . . . . . . . . .
Part Names and Functions Before Using the Handset 1 2 9 A E B C F G H D 3 I J : ; 4 5 6 7 < = > O K L M H ? 8 N @ ■For using earphone Connect an optional connector-terminal-compatible earphone. When using a connector-terminal-non-compatible earphone, use an optional plug adapter for connection. ≥When inserting or pulling the plug adapter, take hold of the plug for the handset side and insert or pull it straight.
2Earpiece ・For listening to the other party’s voice 3Display (See page 27) 4l Mail key 5m Menu key 6d Start key/Hands-free key ・For making/receiving calls (See page 48 and page 62) ・For talking with Hands-free (See page 61) 7r Clear key/i-Widget key ・For returning to the previous operation ・For clearing entered text or a phone number 8Microphone ・For speaking to the other party 9Inside camera ・For shooting photos of yourself (See page 230) ・For displaying your face during a videophone call :o Speed selector
Before Using the Handset Opening/Closing FOMA Terminal Navigation Displays and Key Operations Hold the FOMA terminal with both hands to slide the display upward/ downward. Take care not to touch the keys when you open or close the FOMA terminal. Key operation errors may result. When you want to execute the operation shown on the vertical display, press the corresponding key as below. ≥When a call comes in, you can answer it just by opening the FOMA terminal.
■Operating speed selector Vo ・Moves the cursor or highlighted display up. (Press and hold to scroll continuously.) ・Scrolls the page up. ・Moves the cursor to the right. ・Scrolls forward page by page. (Press and hold to scroll continuously.) Co Xo ・Moves the cursor or highlighted display down. (Press and hold to scroll continuously.) ・Scrolls the page down. ・Fixes the operation. Speed Selector Setting You can set whether to validate the rotating operation of the speed selector.
Before Using the Handset Main Key Operations from the Stand-by Display From the Stand-by display, you can execute the following actions by operating each key: Key operation 26 Press the key for a short time Press and hold the key for at least one second Key operation Press the key for a short time -1 Enters “1”. -2 Enters “2”. -3 Enters “3”. -4 Enters “4”. -5 Enters “5”. -6 Enters “6”. -7 Enters “7”.
Viewing Display 1 69 1 F D E J H G I L K Radio waves reception level (estimate) Strong 6 Weak (yellow) During i-mode communication (See page 190) 7 (yellow) During SSL communication (See page 191) 8 Unread i-mode mail or an SMS message exists. (See page 155 and page 187) New i-concier information exists. (See page 212) 9 An i-αppli call you did not reply to exists. (See page 306) The area for i-mode mail and SMS (dark blue) messages in the FOMA terminal is full.
During Lock All (See page 124) During Multitask (See page 401) During Personal Data Lock (See page 127) Multiple functions are activated. (See page 401) Before Using the Handset During Keypad Dial Lock (See page 131) While watching a 1Seg program (See page 253) During Secret Mode or Secret Data Only (See page 132) During IC Card Lock (See page 316) > A During recording of a 1Seg program by Timer Recording (See page 264) Both Keypad Dial Lock and Secret Mode/ Secret Data Only are set.
Missed call to Number B of 2in1 Shows the Missed Call list. (See page 53) Using Icons on Desktop Notification icon Desktop icon ■Operation when a status icon is selected Shows the display for Vibrator. (See page 106) Shows the display for Ring Volume. (See page 66) Shows the display for Manner Mode Set. (See page 110) Before Using the Handset Status icon Record message Shows the Record Message list. (See page 70) Videophone record message Shows the Videophone Record Message list.
The Phonebook could not be updated by Data Security Service Shows the update display for Data Security Service. (See page 137) Before Using the Handset Provide Location was executed automatically Shows Location History. (See page 335) Provide Location could not be executed automatically Shows Location History. (See page 335) You did not respond to a location provision request Shows Location History. (See page 335) Software Update is needed Starts Software Update.
Paste Icons to Desktop You can paste up to 15 desktop icons of such as phone numbers, mail addresses, etc. The display for an item to be pasted 1i( 1Add desktop icon1YES ) ≥When you operate from the detailed mail display, select “Store” from the Function menu and then select “Add desktop icon”. If the addresses of the sender and another recipient of simultaneous mail are found or the multiple destination addresses are found, select a mail address or phone number to be pasted.
Before Using the Handset Edit title Sort 1Enter a title. ≥You can enter up to 16 full-pitch/32 half-pitch characters. However, the number of characters for the title displayed when you highlight the icon is up to 11 full-pitch/ 22 half-pitch characters from the beginning of the title. 1Select a desktop icon1Use Bo to change the order 1Oo( ) ≥To change the order in succession, repeat the above steps. 1l( Reset desktop 1YES Delete all 1YES 1 ) are called icons. You m1Set.
Scroll Selection 1 Select a main menu icon from the menu function Select “Set./Service” from Main Menu. Main Menu at purchase differs depending on the body color. (See page 480) Description Example of Steps Main menu icon Sub-menu item Function name of lower sub-menu item 1 mSet./ServiceTalkQuality alarmSelect an alarm. No tone. . . . . . . . . Does not sound. High tone. . . . . . . . High alarm sounds. Low tone. . . . . . . . Low alarm sounds.
Before Using the Handset 2 Select a sub-menu item from the menu function Select “Talk” from “Set./Service”. *Oo 4 Set or check the function Some menu items have even more detailed menus. The example below shows how to set “Low tone” for “Quality alarm”. *Oo ≥The highlighted item is the currently selected one. ≥Press *Xo to highlight the item below, and Zo * to highlight the item above. ≥Press and hold *Bo to scroll the items continuously. ≥Press *No to scroll page by page.
Description Example for Function Menu 1 Call up the function using the menu number Item displayed in the Function menu Operating procedures after selecting an item in the Function menu Delete all You can delete all files. Enter your Terminal Security CodeYES An actual operation is done as follows: +m -7-5 Press +i( ). Use *Mo to highlight “Delete all” and press *Oo( ). Enter your Terminal Security Code and press *Oo( ). Use *Bo to highlight “YES” and press *Oo( ).
Before Using the Handset Item scroll When menu items are listed over multiple pages, you can show the previous/next page by pressing Bo with the uppermost/lowermost item highlighted. You can press No to scroll through page by page. When / is displayed on the display, you can scroll through page by page also by pressing m( )/c( ). ≥Depending on the display being shown, such as lower sub-menu items, you might be able to scroll through page by page also by pressing instead of No.
Information Using UIM (FOMA Card) You need to turn off the power and then remove the battery before you insert the UIM. (See page 39) ■Inserting 1 With the golden IC surface downward, push the UIM slowly to the end while pressing the surface of it. ■Removing 1 While sliding the UIM, pull it out slowly. Security Code You can set two security codes, PIN1 and PIN2, for a UIM.
Before Using the Handset ♪♪♪♪♪ Information Your UIM ♪♪♪♪♪ Another person’s UIM If the UIM used for obtaining data files or mail messages is inserted, you can browse/play back the data files with the UIM security. Replacing UIMs Unless the UIM used for obtaining data files or mail messages is inserted, you cannot browse/play back the data files with the UIM security.
Attaching/Removing Battery Pack Use the FOMA terminal’s dedicated Battery Pack P19. ■Attaching 1 While pressing the “ ” part of the back cover in the direction A, slide the back cover (2 mm or more) in the direction B to unlock and remove it. 3 Put the back cover to the FOMA terminal as illustrated, and while pressing the whole part of back cover downward, slide it in the direction of arrow to remove it. ≥Confirm there is no gap between the back cover and the FOMA terminal.
Do not charge for long periods of time (several days) with the FOMA terminal turned on. Charging Before Using the Handset Use the FOMA terminal’s dedicated Battery Pack P19. Life of battery pack ≥Battery packs are consumables. The usable time shortens slightly each time they are charged. ≥When the usable time of the battery pack becomes half the time it was purchased, replacing is recommended because the battery pack is nearing the end of its life.
Estimated time for charging battery pack AC adapter Approx. 120 minutes DC adapter Approx. 120 minutes Check that the Call/Charging indicator lights in red. When the Call/Charging indicator flickers, dismount the AC adapter and battery pack from the FOMA terminal and then re-mount them for charging. If the symptom persists, troubles with the AC adapter, desktop holder or battery pack may be involved, so consult a handling counter such as a docomo shop.
Before Using the Handset When charging only with the AC adapter Insert the connector with the engraved surface facing up until it clicks. Pull straight the connector out while pressing the release buttons. ≥To charge the battery, place the cover of the connector terminal as illustrated. Pull out the cover of the connector terminal to direction A, and turn it as direction B.
Check Welcome Mail Turning Power ON/OFF Turn Power On Press and hold h for at least one second. 1 After the Wake-up display (see page 112) is displayed, the Stand-by display appears. ≥If you have stored many Phonebook entries or mail messages, it may take a while for the display to appear. ≥If Set Time is set, the current date and time are shown. ≥When “ ” is displayed, the FOMA terminal is out of the service area or in the place where the radio waves do not reach.
Before Using the Handset Configuring Initial Setting If the date and time, Terminal Security Code, Keypad Sound, Speed Selector Sound, Location Request Set., or Font Size is not set, the Initial Setting display appears when you turn on the power. You can set the initial settings also from each menu function separately. 1 Turn on the power1YES ≥When the display for entering your Terminal Security Code, PIN1 code, or PIN2 code appears, follow the operation on page 43.
2 Enter year, month, date and time. Displaying World Time You can display the time of the specified area on the Stand-by display. ). 1 About date/time correction function This function corrects the time of the FOMA terminal according to the clock information obtained from the network when you turn on the power. The time is corrected when you show the Stand-by display with “Auto time adjust ON” set.
Before Using the Handset Notifying the Other Party of Your Phone Number You can set the FOMA terminal to send your phone number to the called party’s phone when dialing. Your phone number is important information, so take utmost care when notifying your phone number. This function is available only when the other party’s phone supports Caller ID. Set Caller ID Notification to Network m1Set./Service1NW services1Caller ID notification 1Do the following operations.
Voice/Videophone Calls/PushTalk Making Calls/Videophone Calls Videophone Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Making a Call/Videophone Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Switching a Voice/Videophone Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using Call Records. . . . . . . . . Using Chaku-moji . . . . . . . . . . . . . . . . . . . . . . . . . .
Videophone Calls Making a Call/Videophone Call Voice/Videophone Calls/PushTalk You and the other party can talk viewing each other’s images. DOCOMO videophones conform to 3G-324M, standardized by the international standard 3GPP. You cannot connect to the videophone that uses a different format. ≥3GPP (3rd Generation Partnership Project): This is the regional standards organization for developing common technical specifications for third-generation mobile telecommunication systems (IMT-2000).
Information When Making a Videophone Call Press l( ≥You can make a voice call also by pressing -d and then entering the party’s phone ). The digital communication charging starts from this display. 3 Press h to end the call after talking. Information ≥If you hear the guidance requesting your caller ID (see page 446), follow the steps of “To notify your caller ID” on page 57 to enter “186” and redial.
If a videophone call could not be connected Voice/Videophone Calls/PushTalk The reason why it could not be connected is displayed. (The displayed reason might not be the same as the actual reason depending on the type of the other party’s phone and contract for network services.) Messages Check number, then redial Busy Busy with packet transmission Out of service area/power off Set caller ID to ON Your call is being forwarded Redial using voice call Reasons You have dialed a non-existent phone number.
Switching a Voice/Videophone Call You (caller) can switch between a voice call and a videophone call. This function is available for the mobile phones that can switch between a voice call and a videophone call. When the other party’s phone has a function to switch between the calls, “ ” is displayed on your phone and you can switch from the voice call to videophone call. 1 During a voice call1c( ≥When you select an image to be sent to the other party, select “Select image”.
※ / ※ Received calls/missed calls of 64K data communication Dialed calls of packet communication Using Call Records Voice/Videophone Calls/PushTalk / Received calls/missed calls of packet communication The FOMA terminal can store the other party’s phone number and date/ time you have dialed or received. You can call back to the other party.
Use Received Calls Press Co. 1 Function Menu while Redial/Dialed Calls/Received Calls is Displayed Select a received call record. Notify caller ID See page 56. ≥The other party’s phone number is displayed if it is provided. If this caller is stored in the Phonebook, the phone number, name, and icon are displayed. If the same phone number is stored with multiple names in the Phonebook, the name and icon that come first in search order (see page 94) are displayed.
Voice/Videophone Calls/PushTalk Store P-Talk group 1Select a group. ≥When members who are not stored in the PushTalk Phonebook are found, the confirmation display appears asking whether to store them. 1Enter a group name. ≥You can enter up to 16 full-pitch/32 half-pitch characters. Mail Compose message You can compose a mail message to send to the phone number set as the destination address. Go to step 3 on page 142.
Information Store Messages You can store up to 10 Chaku-moji messages in the Message list. 1 ≥To edit a stored message, highlight it and press l( ). ≥You can enter up to 10 characters regardless of whether they are pictograms, symbols, or full-pitch/half-pitch characters. Make a Call with a Message Enter a phone number or call up the detailed display of a Phonebook entry, redial item, dialed call record, or received call record. i( )1Chaku-moji1Do the following operations.
Voice/Videophone Calls/PushTalk 2 Select a sent message. ≥When the other party’s phone number is stored in the Phonebook, the phone number, name, and icon are displayed. Prefer Chaku-moji You can set how your FOMA terminal works for incoming Chaku-moji messages for when “Setting when opened” is set to “Answer”. 1 ON . . . . Does not answer by opening the FOMA terminal during ringing, so you can check a Chaku-moji message. OFF . . . Answers by opening the FOMA terminal while it is ringing.
Set “Notify/Not Notify” by Entering “186/184” 1 ≥Press l( Not to notify your caller ID 184→Destination phone number1d or Oo( 1 ≥Press l( ) ) to make a videophone call. ) ) to make a videophone call. Sending Touch-tone Signals You can send touch-tone signals from your FOMA terminal to use services such as reserving tickets, checking bank balance, etc. Store Pause Dial You need to store a number string to be sent as a touch-tone signal in the Pause Dial list.
Voice/Videophone Calls/PushTalk 2 Check that the line is connected1d or Oo( ) A number string up to the first pause (p) is sent, and a number string up to the next pause (p) is displayed. A number string up to the pause (p) is sent each time you press d or Oo( ). When you have finished sending the last number, the “Talking” display appears. ≥To send multiple pieces of a number string at a time, press and hold Vo for at least one second, and select “Send at one time”.
International Dial Assist You can make a call adding a country/area code or international call access code to a phone number. (Except for some countries and regions, if the phone number starts with “0”, the “0” at the beginning is automatically deleted.) 2 Enter a phone number or call up the detailed display of a Phonebook entry, redial item, dialed call record, or received call record.
Delete all 1Enter your Terminal Security Code1YES Information 2 )1Prefix numbers1Select a name ) ≥Press l( ) to make a videophone call and press p to make a PushTalk call. ≥For making a PushTalk call, adding a prefix number such as “186” or “184” to the beginning of the phone number is disabled. ≥You cannot delete the country/area code or international call access code set by “Auto assist setting”.
Information ≥The reconnectable time differs depending on the usage status and radio wave conditions. An estimate is about 10 seconds and the call charge is applied also for that duration. ≥While you are disconnected, no sound is transmitted to the other party. 1 Making Voice Clear According to Surrounding Noise The volume of the other party’s voice is turned up according to the surrounding noise during a call.
Voice/Videophone Calls/PushTalk Information ≥To connect using a cable (USB connection), set “USB mode setting” to “Communication mode”. ≥“ ” appears while you are talking or communicating using a USB Hands-free compatible device. ≥“ ” might appear while the FOMA terminal is connected to a USB Hands-free compatible device, and “ ” while “USB mode setting” is set to “microSD mode”, depending on the Hands-free device connected.
Information Display for incoming calls When a caller’s phone number is provided If you store the caller’s name, phone number, and image in the Phonebook, the name, phone number, and icon (or image) are displayed. ≥If the same phone number is stored with multiple names in the Phonebook, the name that comes first in the search order (see page 94) is displayed. ≥The phone number but not the name is displayed during Personal Data Lock.
Switched from a Voice Call to Videophone Call by the Other Party The display for switching to a videophone call appears during a voice call. Voice/Videophone Calls/PushTalk 1 YES . . . Sends the image through your camera to the caller. NO . . . . Sends a pre-installed substitute image to the caller. ≥While switching, the message to that effect is displayed and the voice guidance is played back.
Setting Response for when Opening FOMA Terminal during Ringing Information ≥If you receive a videophone call with “Answer” set, the still image set for “Substitute image” of “Select image” is sent to the other party. +m-1-8 Setting Response for when Closing FOMA Terminal during a Call Set Response for when Closing FOMA Terminal during a Voice Call/Videophone Call m1Set./Service1Talk1Setting when closed 1Phone/Videophone1Select an item. 1 Continue . . . . .
+m-5-0 Adjusting Ring Volume Voice/Videophone Calls/PushTalk You can adjust the ring volume for incoming calls and mail. 1 m1Set./Service1Sound1Ring volume 1Select an incoming type 1Use Bo to adjust the volume. Putting a Call on Hold when You cannot Answer Immediately 1 During ringing1h 2 Press d or Oo( the call. ≥The following icons are displayed on the Stand-by display while “Ring volume” is set to “Silent”: : Set for “Phone”, “PushTalk”, or “Videophone”.
2 Press d or Oo( the call. ) to release hold and answer Information ≥The caller is charged for the call even while the call is on hold. ≥If a new call comes in while the current call is put on hold, the hold (Holding) is released. Setting Hold Tone You can set the guidance the other party hears during on hold. 1 m1Set./Service1Talk1Set hold tone 1On hold tone or Holding tone1Select a hold tone. Tone 1/2 . . .The caller hears the pre-installed guidance in Japanese.
Voice/Videophone Calls/PushTalk When Public Mode (Drive Mode) is activated ・Even when a call comes in, the ring tone does not sound. The “Missed call” icon appears on the display and the call is stored in “Received calls”. The guidance is played back to the caller to the effect that you are currently driving or in an area where mobile phones should not be used. Then the call is disconnected.
+m-5-5 Incoming calls when Record Message Setting is set to “ON” Recording Voice/Video Messages when You cannot Answer a Call Activate Record Message m1LifeKit1Rec. msg/voice memo 1Record message setting1ON or OFF 1Select an answer message. 1 ≥Press l( ) to play back the answer message. Press r to end the demo playback. ≥When “Japanese 1”, “Japanese 2”, or “English” is set, a beep sounds after playing back the answer message to the other party.
Voice/Videophone Calls/PushTalk Information ≥When Voice Mail Service or Call Forwarding Service is set at the same time as Record Message, the priority depends on the ring time set for Voice Mail Service or Call Forwarding Service. To give Record Message priority, set the ring time for Record Message Setting shorter than that for Voice Mail Service or Call Forwarding Service.
To skip to next message Erase rec. msg. Each time you press > during playback, messages are played back in the following order: the next new record message → the oldest record message → a voice memo. To cancel playback midway ) or r. Play Back/Erase Videophone Record Messages/Movie Memos m1LifeKit1Rec. msg/voice memo 1Play/Erase VP msg. 1Select a videophone record message or movie memo. Erase movie memo You can erase all movie memos.
Substitute Image Useful Functions for Videophone Calls You can set a Chara-den image for “Substitute image” of “Select image”. Voice/Videophone Calls/PushTalk 1 Chara-den display/Chara-den list/Chara-den Recording display1i( )1Substitute image ≥From the Chara-den list, you can set it also by pressing m( ). Chara-den Setup You can perform settings for a Chara-den call. These settings are effective only for during a videophone call.
Switch Image Display Positions Zoom You can switch the display locations of the received image and the sent image. During a videophone call, press c( WIDE ). ≥Each time you press c( ), the displays switch. 1 c During a videophone call 1Use No to adjust the magnification. ≥The former zoom setting returns when the videophone call ends. Function Menu during Videophone Call c +c CHG to voice call See page 51.
Brightness At videophone start-up 0 Voice/Videophone Calls/PushTalk White balance At videophone start-up Automatic Color mode set At videophone start-up Normal Night mode At videophone start-up OFF Focus At videophone start-up Landscape You can adjust the brightness of the camera image to be sent to other party to -3 (dark) through +3 (bright). 1Select a brightness level. You can adjust the colors of the camera image to be sent to the other party, to make the colors look more natural. 1Select an item.
Voice/Videophone Calls/PushTalk Setting for Switching a Voice/Videophone Call during a Call You can let the other party know that your FOMA terminal can switch between a voice call and a videophone call. This function is set to “Indication ON” at the time of contract. When “Notify switchable mode” is set to “Indication ON”, the caller can switch between the videophone call and voice call.
Checking inside of a Room when You are Out Function Menu of the Other ID List You can call up a phone number in the Phonebook, Dialed Calls, or Received Calls to enter it. 1Select an item. Phonebook . . . Call up a Phonebook entry and select a phone number. Dialed calls . . . Highlight a phone number and press Oo( ). Received calls . . . Highlight a phone number and press Oo( ).
Voice/Videophone Calls/PushTalk Information ≥When your FOMA terminal is used for the receiving end, an image through the caller’s camera appears, and sound comes out. (You cannot switch to a substitute image.) ≥Remote Monitoring does not start during Manner Mode and Public Mode (Drive Mode). However, it starts even during Lock All.
2 When the other party answers, talk while pressing p. 3 Press h to end the communication after talking. A tone to notify the disconnection of communication sounds at the other end. ≥When a call you made is a group call, the PushTalk communication itself continues even if you press h, and “Disconnected” appears on each member’s display and a confirmation tone sounds. However, when all the members cannot communicate due to “Disconnected”, “No PT Func”, etc., the PushTalk communication itself ends.
Voice/Videophone Calls/PushTalk ■Display while dialing/communicating 1The phone number of the member who has the talker’s right is displayed, and the state of the talker’s right is displayed in color of the round icon at the upper left. When the name of that member, phone number, and image are stored in the Phonebook, his/her name and image are displayed. However, when you cannot receive a member’s information correctly, “?” is displayed. 2The corresponding state※ of each member is shown.
Adding a Member during a PushTalk Call Receiving a PushTalk Call 1 ≥Members can be added from the calling end only. ≥You can add even the members who use the PushTalk compatible models which do not have this function. ≥If you have already made a call to four members, you cannot add a new member though you can call up a member who has exited the call again. ≥The added members are not stored in Redial/Dialed Calls. 1 During PushTalk communication1l( 1Do the following operations.
Voice/Videophone Calls/PushTalk 3 Press h to end the communication after talking. A tone for confirming the end of communication sounds at the other end. ≥When a call you received is a group call, the PushTalk communication itself continues even if you press h, and “Disconnected” appears on each member’s display and a confirmation tone sounds. However, when all the members cannot communicate due to “Disconnected”, “No PT Func”, etc., the PushTalk communication itself ends.
View call records You can access a dialed call record or received call record to store it in the PushTalk Phonebook. You cannot store in the PushTalk Phonebook from the dialed/received call record of the party who is not stored in the FOMA terminal’s Phonebook. 1Dialed calls or Received calls1Select a record 1Select a phone number1YES Store in Group You can store PushTalk Phonebook entries in groups. You can store up to 19 members per group and create up to 10 groups. 1 2 1Select a member.
2 Put a check mark for members you want to make a call to 1p or l( ) Voice/Videophone Calls/PushTalk ≥When you do not check any members, the call is made to the highlighted member. Edit group members You can edit the members in the group. [Group list/Member Go to step 2 on page 83. list] Group Member list ≥When five or more members are stored in a group, you cannot make a call to all the members by selecting the group.
Setting for Making/Receiving a PushTalk Call 1 1 PushTalk Phonebook list1i( ) 1DEL from P-Talk PB1Do the following operations. Delete this 1Select a deleting method. DEL from P-Talk PB . . . Deletes an entry in the PushTalk Phonebook only. Does not delete the entry in the FOMA terminal’s Phonebook. DEL from all PBs . . . Deletes an entry in both the PushTalk Phonebook and FOMA terminal’s Phonebook. m1Set./Service1PushTalk 1Do the following operations. Auto answer setting 1Select an item. ON . . . . .
Voice/Videophone Calls/PushTalk Information ≥When you set to “ON”, calls are automatically answered even when the FOMA terminal is closed regardless of “Setting when closed”. ≥When you set to “ON”, calls are automatically answered after switching to Hands-free regardless of “Hands-free w/ PushTalk”. However, the FOMA terminal works following the setting of “Hands-free w/ PushTalk” if you open the FOMA terminal after you answer a call with the FOMA terminal closed.
Phonebook Phonebooks Available for FOMA Terminal . . . . . . . . . . . . . . . . . 88 Storing Phonebook Entries . . . . . . . . . . . . 88 Storing Displayed Phone Number/Mail Address in Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Setting Groups . . . . . . . . . . . . . . . . . . . . . . . . . . 93 Dialing from Phonebooks . . . . . . . . . . . . 94 Editing Phonebook Entries . . . .
Contents of Phonebook Setting item Basic item Number of entries Name (Reading) Group Phone number Phone number icon Mail address Mail address icon Address Location information Birthday Memo Image Memory No.
You can enter the name of the person or company in kanji, hiragana, katakana, alphabetic characters, or numerals. 1Enter a name. ≥For the FOMA terminal, you can enter up to 16 full-pitch/32 half-pitch characters. You can enter pictograms and symbols as well. ≥For the UIM, you can enter up to 10 full-pitch characters/21 half-pitch alphanumeric characters. (Half-pitch katakana characters cannot be entered.
Phonebook Mail address You can store up to three mail addresses per Phonebook entry in the FOMA terminal. You can set an icon for each mail address to categorize mobile phone addresses, home addresses, and so on. You can store only one mail address per Phonebook entry on the UIM. 1Enter a mail address. ≥The mail address can consist of up to 50 half-pitch alphabets, numerals or symbol characters. ≥When the mail address is “phone number@docomo.ne.jp”, store the phone number only.
Image Ring tone Vibrator 1Enter a memory number. ≥Enter a three-digit number of “000” through “999”. ≥The lowest empty memory number “010” through “999” is entered in advance. If “010” through “999” are all occupied, the lowest empty memory number from “000” through “009” is entered. You can set a ring tone for when a voice call or videophone call comes in from the person stored in the Phonebook. 1Select ring tone Go to step 2 on page 104. ≥To release the stored ring tone, select “Release ring tone”.
Phonebook Answer message 3 Press l( You can set an answer message for Record Message by Phonebook entry. 1Select answer message1Select an answer message. ≥To release the stored answer message, select “Release answer message”. ). ≥If you have not entered any name, “ store the entry. ” is not displayed and you cannot Phonebook entries while editing When the low battery alarm sounds The Phonebook entry you are editing is saved automatically.
1 Call up/Select an item to be stored1i( 1Add to phonebook ) Information 2 Phone or UIM1Select a storing method. 3 Select a search method1Search the Phonebook 1Select a Phonebook entry to be stored1Oo( New . . . Go to step 2 on page 88. Add . . . Adds data to the existing Phonebook entry. When storing data on the UIM, “Overwrite” is displayed.
Phone number? You can enter a part of the other party’s phone number and search. You can search for the entry even from the middle of phone number. 1Enter a part of the phone number1Bo ≥You can display the Phonebook list also by entering a part of the phone number from the Stand-by display or the “Talking” display, and pressing Bo. Mail address? You can enter a part of the other party’s mail address and search. You can search for the entry even from the middle of mail address.
About Phonebook List press 5, the cursor moves to the top of “ニ” “ヌ” and so on. ≥After you search by “Memory No.?”, you can move the cursor to the “000~” to “900~” tab by pressing each numeric key from the list. Press 5 to move the cursor to the “500~” tab. ≥You can make a voice call to the phone number stored for the name highlighted on the Phonebook list, by pressing d. Also, press l( ) to make a videophone call and press p to make a PushTalk call.
Phonebook i-concier information ≥When you select a postal address and select “YES”, the GPS compatible i-αppli program set by “Select map” of “GPS settings” starts to show the map. When you highlight a postal address and press l( ), the full display appears. ≥You can display a site or Internet web page when you select a URL, select “i-mode” or “Full Browser”, and then select “YES”. When you highlight a URL and press l( ), the full display appears. ≥When you select a memo, the full display appears.
Information ≥You cannot send Phonebook entries from the UIM. ≥See page 421 for the Bluetooth function. Copy to phone See page 419. Connect to Center See page 136. Copy item Copy name Function Menu of the Detailed Phonebook Display See page 56. Prefix numbers See page 60. Int’l dial assist See page 59. Select image See page 75. 2in1 dial You can select a phone number to notify the other party in Dual Mode of 2in1.
Phonebook Secret code You need to add the recipient’s secret code when sending i-mode mail to anyone who has registered a secret code. Once you set the secret code for the mail address in the Phonebook entry, it will be added automatically whenever you send mail to that address. 1Enter your Terminal Security Code1Set code ≥From the detailed display, press Mo to highlight a phone number or mail address to be set with a secret code. ≥To check the secret code, select “Check code”.
Deleting Phonebook Entries Checking Phonebook Storage Status 1 Phone number/ This item 1YES ≥Highlight an item to be deleted by pressing Mo from the detailed display. ≥You cannot delete information obtained by i-concier. This phonebook 1YES 1 Delete from the Phonebook List Phonebook list1i( )1Delete data 1Do the following operations.
Information Information Phonebook ≥When the Phonebook entry contains multiple phone numbers, the first phone number will be dialed. ≥When you set “Restrict dialing” to a Phonebook entry of memory number 000 through 009, set it to the first phone number in the Phonebook entry. ≥When you store a Phonebook entry of memory number from 000 through 009 as secret data, make a call to that entry in Secret Mode or Secret Data Only.
Information To access a voice dial entry using an earphone/microphone You need to set “Voice headset dial” to “ON” and open the FOMA terminal in advance. 1 2 Press and hold the switch of the earphone/microphone (option) for at least one second. Perform the operations of “Dial from Phonebook by Voice” on page 100. Voice Settings m1Set./Service1Other settings1Voice settings 1Do the following operations. 1 Auto voice dial You can automatically make a call to the phone number accessed by voice.
102
Sound/Screen/Light Settings Sound Settings Changing Ring Tone. . . . . . . . . . . . . . . . . .
Information +m-6-4 Setting Sound Effects of Ring Tone or Melody You can set whether to add stereophonic sound effects to the playback tone of melodies and i-motion movies, ring tones, and effect tones. 1 m1Set./Service1Sound1Melody effect 1Do the following operations. Stereo&3DSound You can play back 3-dimensional sound from a stereo earphone (option). This is effective for the i-αppli effect tones or ring tones.
+m-5-4 Informing You of an Incoming Call by Vibration You can set the vibrator to notify you of incoming calls and mail. Sound/Screen/Light Settings 1 m1Set./Service1Incoming call1Vibrator 1Select an incoming type1Select a vibration pattern. Pattern 1. . . . . . . . . Alternates between vibration on (about 0.5 second) and off (about 0.5 second). Pattern 2. . . . . . . . . Alternates between vibration on (about 1 second) and off (about 1 second). Pattern 3. . . . . . . . .
Information ≥Melody Call is not available for incoming videophone calls and PushTalk calls. ≥When you select “YES” from the confirmation display asking whether to connect to the site, the line is connected to the i-mode site. You are not charged a packet communication fee for connecting to the site for settings, however, you are charged for connecting to the IP site, i-mode menu site, and free melody corner. +m-3-0 1 m1Set.
+m-6-8 Setting Ring Time for Mail and Messages R/F Sound/Screen/Light Settings You can set the duration of the ring tone which sounds for incoming i-mode mail, SMS messages, Chat mail, Messages R/F, and i-concier information. 1 m1Set./Service1Sound1Mail/Msg. ring time 1Select a type of mail or message1ON or OFF 1Enter a ring time (seconds). ≥Enter in two digits from “01” through “30”.
Information To release Manner Mode Press and hold s for at least one second. During a call or calling, two beeps sound and the message that is released appears. ≥When the FOMA terminal is closed, you can release Manner Mode also by pressing and holding < for at least one second. +m-2-0 Selecting Manner Mode Type You can select one of three types of operations for Manner Mode.
Sound/Screen/Light Settings Timer recording alarm Start tones for shooting still images and movies Confirmation tone for selecting shutter sound Switching to Hands-free by “Hands-free w/ V. phone” or “Hands-free w/ PushTalk” Read aloud volume Effect tones of Flash movies Effect tones at the start of i-Widget Manner Super Original Mode Silent Silent Works with the same set value as ①.※7 Level 4 Level 4 OFF Works with the same set value as ①.
Selector sound 1Select a pattern. ≥See page 107 for Speed Selector Sound. When Calendar/Schedule is set Mic sensitiv. 1Normal or Up LV alarm tone 1ON or OFF ≥See page 42 for LV Alarm Tone (low battery alarm). 2 Press l( ). +m-5-6 Changing Displays Set Stand-by Display You can set an image for the Stand-by display. You can set also i-motion movies shot by the FOMA terminal or downloaded from sites for the Stand-by display. 1 m1Set.
Not to display icons on the Stand-by display Sound/Screen/Light Settings Press h from the Stand-by display. Calendar, schedule events, status icons, notification icons, and desktop icons are cleared. Press h again to show the icons and others. When a Flash movie is set for the Stand-by display, however, the following operations are performed: ・When you press h during playback of a Flash movie, the playback pauses. Press h again to clear the icons and others.
Information Information ≥The images or ring tone set at purchase might be displayed or played back for incoming calls or messages, depending on the combination of this function and “Select ring tone”. ≥You cannot set some images for “Display setting”. ≥The sound of Flash movies is not played back. ≥The priority order of displays for call receiving is as follows: “Picture for Phonebook entry” → “Picture for group” → “Image for Phonebook entry” → “Display setting”.
Sound/Screen/Light Settings Charging 1Standard or Long time light Standard . . . . . . . . . Lights during charging in the same setting as it lights in ordinary time. Long time light . . . When 15 seconds elapse without any operation during changing, the backlight switches to Level 1, and when 3 hours elapse, it switches to Power Saver Mode. ≥When an AC adapter (option) or another device is connected, the backlight lights following the setting of this function even after charging is completed.
Making Display Hard to See from People Around You can adjust the contrast of the display so that it is hardly viewed from a slanted angle. ≥When “ON” is set, “ ” appears on the Stand-by display. ≥While selecting a contrast level, you can check the selected contrast on the display. To switch View Blind on/off by pressing one key Press and hold 8 for at least one second.
Sound/Screen/Light Settings Information Information ≥The image you can set for “Customize” is a JPEG or GIF image whose size is Stand-by (480 x 854) or smaller and up to 300 Kbytes. Perform “Change size” or “Trim away” for other images. ≥When the image you set “Customize” is deleted, “スタンダード (Standard)” in the “Pre-installed” folder returns. ≥When Personal Data Lock is activated while “Customize” is set, the default image is displayed.
2 YES Information Setting Color of Call/Charging Indicator and Others ≥Even if you perform “Reset disp. /sound” or “Reset menu screen”, you cannot reset “Font size”. ≥Even if you execute “Reset menu screen”, the Main Menu items you have manually replaced by “Change launcher” are not reset. 1 All illum. setting You can set all illumination items at one time. 1Select a pattern. Incoming illumination See page 118.
Sound/Screen/Light Settings Hourly illumination You can be notified of the specified time (every hour at 0 minutes) by the tone and light of the Call/Charging indicator. 1Select a pattern. OFF. . . . . . . The Call/Charging indicator does not light. Pattern 1. . . A fixed tone sounds and the Call/Charging indicator lights in the fixed color. Pattern 2. . . The tone and light of the Call/Charging indicator change by time.
+m-6-6 Changing Character Font 1 m1Set./Service1Display1Font 1Font 1, Font 2, or Font 3 Information Changing Font Size 1 m1Set./Service1Display1Font size 1Do the following operations. You can set all the changeable items such as font size at a time. 1Extra large, Large, Standard, or Small ≥The confirmation display might appear asking whether to change the font size of the menu as well.
Sound/Screen/Light Settings Dialed/recv. calls You can set the font size for the Redial, Dialed Calls, Received Calls, Sent Address and Received Address. 1Large or Standard ≥You can set also by m1Phonebook1Phonebook settings 1Font size1Dialed/recv. calls. Character input You can set the font size for the character entry display, Message Composition display, or SMS Composition display.
Security Settings Security Code Security Codes Used for FOMA Terminal . . . . . . . . . . . . . . . . . Changing Terminal Security Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting PIN Code. . . . . . . . . . . . . . . . . . . . . . . . . . Releasing PIN Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Security Codes Used for FOMA Terminal Security Settings For some functions of the FOMA terminal, you need to enter your security code. In addition to the Terminal Security Code for operating respective mobile phone functions, the Network Security Code to use network services, and i-mode password are available. These security codes help you utilize your FOMA terminal.
≥If you purchase a new FOMA terminal and use the existing UIM with the new FOMA terminal, use the PIN1 code and PIN2 code you have set previously. When the PIN1 Code/PIN2 Code Entry display appears, enter your four- to eight-digit PIN1 code/PIN2 code and press Oo( ). m1Set./Service1Lock/Security 1Change security code 1Enter the current Terminal Security Code. ≥If you enter the code for the first time, enter “0000”.
Change PIN1 Code/Change PIN2 Code You need to have set “PIN1 code entry set” to “ON” to change the PIN1 code. 1 m1Set./Service1Lock/Security1UIM setting 1Enter your Terminal Security Code 1Change PIN1 code or Change PIN2 code 1Enter the current PIN1 code/PIN2 code. Security Settings ≥See page 122 for the PIN1 code/PIN2 code. 2 3 Enter a new PIN1 code/PIN2 code (four to eight digits). ≥The entered PIN1 code/PIN2 code is displayed as “_”. Enter the new PIN1 code/PIN2 code again.
Using Omakase Lock ※Omakase Lock is a pay service. However, you are not charged if you apply for this service at the same time as applying for the suspension of the line or during suspension, or if you are a member of DOCOMO Premier Club. Further, if you have signed up for Keitai Anshin Pack (Mobile Phone Security Package), you can use Omakase Lock within the flat-rate fee of Keitai Anshin Pack (Mobile Phone Security Package).
Using Self Mode Hiding Phonebook Entries and Schedule Events Security Settings You can disable all phone calls and communication functions. During Self Mode, the caller hears the guidance to the effect that radio waves do not reach or the power is turned off. If you use DOCOMO Voice Mail Service or Call Forwarding Service, you can use these services in the same way as when the FOMA terminal is turned off. 1 m1Set.
1 m1Set./Service1Lock/Security1Personal data lock 1Enter your Terminal Security Code. “ ” appears and Personal Data Lock is set. ≥To release Personal Data Lock, perform the same operation. When Timer Lock ON At Close is set, the display for releasing Personal Data Lock appears also by opening the FOMA terminal. When you set “PIM/IC security mode” to “Face reader”, follow the operation of “Use Face Reader to Release Lock” on page 130.
PIM/IC Security Mode You can set the way to release Personal Data Lock and IC Card Lock. Security Settings 1 m1Set./Service1Lock/Security1Lock setting 1PIM/IC security mode 1Enter your Terminal Security Code 1Select a security mode. Security code . . . . .Enter your Terminal Security Code to release the lock. The setting is completed. Face reader . . . . . . .Use Face Reader authentication to release the lock. Double security. . . .
Information Store To use Face Reader, store 3 or more face data files. You can store up to 10 face data files. 1 Function Menu of the Face Data Reading Display Guide frame Recognition frame Face to the front, and locate the face Stored number bar within the guide frame. You can prevent the failure in authenticating Face Data Reading the face data file, which results from display the difference in the position of the face at storing and authenticating the data.
Recognition-failed Image The images not judged as yourself by Face Reader recognition operation are saved. You can use these images to specify who tried to illegally access your data. The image is overwritten every time recognition-failed image is made. Security Settings 1 m1Set./Service1Lock/Security1Lock setting 1Face reader setting 1Enter your Terminal Security Code 1Recog. failed image1Select an image. ≥To delete the recognition-failed images, press i( and then select “YES”.
When “Face reader security” is set to “High” After you are successfully authenticated by Face Reader, your eye blinking is checked. Repeat blinking your eyes slowly. When the detection of eye blinking fails, the authentication also fails. ≥Even in the same environment as that for the authentication by Face Reader, the detection of eye blinking may fail. Change the place or the direction of your face, and then operate.
Key Lock Setting You can set whether to temporarily release Key Lock when you open the FOMA terminal. Security Settings 1 m1Set./Service1Lock/Security1Lock setting 1Key lock setting1Select an item. Lock even slide open . . . . . .Even when you open the FOMA terminal, Key Lock is not temporarily released. Unlock when slide open . . .When you open the FOMA terminal, Key Lock is temporarily released. During temporary release, “ ” is displayed.
Information ≥When you make a call to the party stored as secret data, his/her name is not displayed but the phone number is displayed on the Dialing/Talking display. ≥If you call up a secret entry to make a call or send mail, the record is not stored in “Redial”, “Dialed calls” or “Sent address”. ≥If you simultaneously activate “Lock all” and “Secret mode” or “Secret data only”, deactivating “Lock all” deactivates “Secret mode” or “Secret data only”.
Call Acceptance You can receive voice calls, videophone calls, and PushTalk calls only from specified phone numbers. You can set only the calls you want to accept to be connected. You can specify up to 20 phone numbers. This function is valid only when the other party notifies his/her phone number. It is advisable to activate “Caller ID request” simultaneously. Restrict Dialing/Call Rejection/Call Acceptance Detailed Phonebook display1i( ) 1Restrictions 1Enter your Terminal Security Code1Select an item.
+m-1-0 Setting Response to Incoming Calls without Caller ID You can set whether to receive (accept) or not to receive (reject) a voice call, videophone call, and PushTalk call depending on the reason for no caller ID. There are three reasons; “Unavailable”, “PublicPhone”, and “User unset”. 1 m1Set./Service1Incoming call1Ring time 1Do the following operations. Ring start time m1Set./Service1Lock/Security1Call setting w/o ID 1Enter your Terminal Security Code1Select an item.
Security Settings Rejecting Incoming Calls from Phone Numbers which are not Stored in Phonebooks You can reject voice calls, videophone calls, and PushTalk calls from the party whose phone number is not stored in the Phonebook. This function is valid only when the other party notifies his/her phone number. It is advisable to activate “Caller ID request” and “Call setting w/o ID” simultaneously. 1 m1Set.
Restoring to your FOMA terminal Note that if you delete Phonebook entries from your FOMA terminal and save the Phonebook to the Data Storage Center, the Phonebook entries on the Data Storage Center are also deleted. When you restore the Phonebook from the Data Storage Center to your FOMA terminal, do the following operations. 1 Setting Data Security Service m1LifeKit1Data Security Service 1Do the following operations. 1 Connect to Center See page 136.
Information お預かりデータ確認 (Check saved data) ≥You cannot execute “Reset settings” during IC Card Lock while “PIM/IC security mode” is set to “Face reader” or “Double security”. ≥After you execute “Reset settings”, the i-Channel tickers are not displayed. Then, when the information is automatically updated or you press *Zo to receive the latest information, the tickers automatically flow. You can check the data files at the Data Storage Center.
Information Resetting Data by Remote Control If you contract with the service of this function, you can initialize the data files (memory within the handset/microSD card/UIM) of the target FOMA terminal by the offer from you (administrator). ■Inquiries docomo Business Online From personal computers http://www.docomo.biz (in Japanese only) ※You may not be able to access due to system maintenance, etc.
Other Security Settings Functions/Service name Besides introduced in this chapter, the following functions/services for the Security Settings are available: Security Settings Functions/Service name If you want Reference page IC Card Lock To protect the IC card function from being used illegally 316 Nuisance Call Blocking Service To prevent crank calls or vicious sales calls from incoming 445 Caller ID Request To prevent the incoming call that does not notify a caller ID 446 FirstPass To ens
Mail i-mode Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 Composing i-mode Mail/Deco-mail Composing and Sending i-mode Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Creating and Sending Deco-mail . . . . . . . . . . . . . . . . . . . . . . . . Creating and Sending Decome-Anime . . . . . . . . . . . . . . . . . . . . Using a Template to Create Deco-mail/ Decome-Anime . . . . . . . . . . . . . . . . . . . . . . . . . .
i-mode Mail 2 Select the address field1Select an item. 3 4 5 Select the subject field1Enter a subject. Once you subscribe to i-mode, you can exchange e-mails over the Internet as well as among i-mode phones. You can attach files (photos, movie files, etc.) within 2 Mbytes in total (up to 10 files) besides mail text. The i-mode mail also supports Deco-mail, so you can change the font color, font size, and background color of mail text.
7 OK Information Function Menu of the Message Composition Display Send You can send the mail message. Go to step 7 on page 143. Preview Check the address, subject, text and attachments before sending. ≥You can send the mail message by pressing l( Save When composing or editing the mail, you can save it to the Draft. ). Operate receiver Add receiver You can add multiple addresses in the address field to send the same i-mode mail to multiple recipients simultaneously.
Mail Delete receiver You can delete the selected address when there are multiple addresses. 1YES Change rcv. type 1Select a receiving type. To . . . . . This is the direct destination address. “To” recipients are displayed at the receiving ends.※ Cc . . . . . Specify to let parties know the mail contents in addition to the direct recipients. “Cc” recipients are displayed at the receiving ends.※ Bcc . . . . Specify to hide the recipients from others.
Copy See page 436. Cut See page 436. Paste See page 436. Undo After entering or deleting characters, pasting data, or operating on a decoration, you can undo your most recent operation. You can do it up to twice. ≥You can undo the operation also by pressing and holding d for at least one second. Pictograms/symbols See page 433. Symbols See page 433. Smiley See page 433. Space See page 433. Phrase/quote Common phrases See page 433. Kuten code See page 433. Input time See page 434.
3 Creating and Sending Deco-mail When editing an i-mode mail message, you can change the size of the font and the color of the background as well as inserting images, thus composing your own original mail. You can create Deco-mail also using the templates (patterns).
Camera You can insert the image shot by the camera on the spot into the text of mail. 1Shoot a still image. ≥The image size of the camera is Sub-QCIF (96 x 128), QCIF (144 x 176) or QVGA (240 x 320). ≥To delete the image, move the cursor to the image and press r. ≥See step 2 and step 3 on page 234 for how to shoot. Font color You can change the color of characters and lines to be entered. 1Select a color1Enter text. ≥You can switch between “20 Color” and “256 Color” by pressing l( ).
Select area You can set Font Color, Blink, Font Size, Word Alignment, Ticker and Swing over the selected text you have entered. You can also change the set decoration, add another decoration, or cancel Blink, Ticker or Swing. 1Select a start point. ≥You can select all text by pressing i( ) and selecting “YES”. 1Select an end point. Set, change, add or cancel each decoration. ≥“ ” is displayed at the upper right of the display during selecting decoration area.
Information Creating and Sending Decome-Anime Decome-Anime is a mail service which enables you to create expressive mail messages which have Flash movies with messages and images, using Decome-Anime templates. You can create them using templates pre-installed or purchased on the IPs (Information Providers) site. Mail ≥You can insert up to 20 types of images within 90 Kbytes in total. However, you can insert up to 2 types of Flash movies.
3 Select the text field1Phone or microSD 1Select a Decome-Anime template. Mail ≥When a Decome-Anime template is already selected, the Edit Decome-Anime display appears. Go to step 4. ≥You can show the preview of the Decome-Anime template by pressing l( ) from the Decome-Anime Template list. ≥When you select a Decome-Anime template, “ ” appears. ≥Depending on the Decome-Anime template, you cannot edit contents. ≥When you send the contents of the Decome-Anime template as they are, go to step 5.
Operate att. file See page 144. Template You can read in a Decome-Anime template to create a Decome-Anime message. 1Phone or microSD 1Select a Decome-Anime template. Go to step 4 on page 150. ≥If any Decome-Anime template is selected, the confirmation display appears asking whether to discard the current contents to read in the new one. Using a Template to Create Deco-mail/ Decome-Anime Function Menu of the Edit Decome-Anime Display See page 151. Preview See page 150.
Mail Function Menu of the Deco-mail Template List Compose message You can create a Deco-mail message using the contents of the template. Go to step 2 on page 142. Sort You can change the order of displayed templates. 1Select an order. Edit title 1Enter a title. ≥You can enter up to 15 full-pitch/30 half-pitch characters. Info You can display the file size, saved date and time of the template, and whether it contains images. No. of templates You can display the number of saved templates.
When you show the Decome-Anime Playback display or preview Function Menu of the Decome-Anime Template List Create Deco-Anime You can create a Decome-Anime message using the contents of the template. Go to step 2 on page 149. Preview You can display the preview of the Decome-Anime template. Edit title 1Enter a title. ≥You can enter up to 10 full-pitch/20 half-pitch characters. Copy to microSD See page 370. Copy to phone See page 371.
Mail imotion 1Select a folder1Select an i-motion movie. ≥Select the attached i-motion movie to play it back. Press r during playback or stop the playback to return to the former display. ToruCa When the ToruCa file is a ToruCa file (details), it is attached as a ToruCa file (details). 1Select a folder1Select a ToruCa file. ≥Select the attached ToruCa file to preview it. Press r to return to the former display. PDF 1Select a folder1Select a PDF file. ≥Select an attached PDF file to display it.
Information Delete Attached File You can delete a selected attached file or all attached files. 1 Message Composition display1 i( 1Operate att. file1Delete att. file 1Delete this or Delete all1YES ) ≥To delete a single file, highlight a file to be deleted. Receiving i-mode Mail Automatically 1 When i-mode mail arrives, “ (pink)” blinks and the receiving message is displayed.
Display Newly Received i-mode Mail Reception Result display1Mail 1Select an i-mode mail message to be displayed. 1 Mail ≥For a Decome-Anime message, the Decome-Anime Playback display appears. Press i( ) to show the detailed display. ≥Press and hold No for at least one second from the detailed i-mode mail display to change the size of characters. (See “Mail” on page 119.
Checking New i-mode Mail i-mode mail messages and Messages R/F arriving at the i-mode Center are automatically sent to your FOMA terminal. However, the messages will be held at the i-mode Center if your FOMA terminal cannot receive mail because it is turned off or out of the service area, or when Receive Option Setting is set to “ON”. When “ (pink)” is displayed, receive mail by checking the i-mode Center. See “Receive option” when “ ” is displayed.
When i-mode Mail with Files Attached/ Pasted is Received Forwarding Received i-mode Mail You can forward the i-mode mail or SMS messages to others. 1 Inbox list/Detailed Received Mail display1i( 1Reply/forward1Forward ≥You can forward also by pressing m( Mail 2 ) ) from the Inbox list. Enter a subject and address, and send the mail. When you have selected an i-mode mail message or a Decome-Anime message, go to step 2 on page 142.
Play Back/Display Attached or Pasted Files You can play back or display the attached/pasted files already obtained. 1 Detailed Sent Mail display/Detailed Received Mail display1Select an attached file. 1 ≥PC movies are saved to the destination folder in “microSD” folder of “PC Movie”. ≥Document files are saved to the destination folder in “Document viewer”. ≥The files not supported by the FOMA terminal are saved to the destination folder in “SD other files”.
Information ≥You cannot save a melody in excess of 100 Kbytes to the FOMA terminal. ≥You cannot save a Flash movie in excess of 100 Kbytes to the FOMA terminal. ≥You cannot save a ToruCa file in excess of 1 Kbyte and ToruCa file (details) in excess of 100 Kbytes to the FOMA terminal. Displaying Mail in Inbox/Outbox/Draft Mail Display Mail from Inbox You can save up to 2,500 received i-mode mail messages including SMS messages.
Display Mail from Outbox Display Mail from Draft You can save up to 1,000 sent i-mode mail messages including SMS messages. You can check the sent i-mode mail messages and SMS messages. 1 l1Outbox1Select a folder. You can edit and send i-mode mail messages and SMS messages in the Draft. You can save up to 20 i-mode mail messages including SMS messages. 1 l1Draft 2 Select a mail message. Outbox Folder list Select a mail message.
■Inbox list and detailed Received Mail display How to See Inbox/Outbox/Draft List and Detailed Display 2 12 5 1 5 ■Mail menu Icons might have the following marks: 4 1 2 3 4 7 3 4 6 6 Unread mail messages or messages are stored in the Inbox. 3 7 7 Failed-to-send mail messages are stored in the Outbox. Draft mail messages are stored in the Draft. 5 Mail “Mail security” is activated.
4Subject The number of characters you can display on the list varies depending on the setting of “Mail list display”, and “Mail” of “Font size”. When a file is attached, it is decreases by 1 full-pitch/2 half-pitch character/s as the icon is added at the top. For SMS messages or Area Mail messages, the beginning of the text is displayed. (“SMS” or “Area Mail” is displayed on the detailed display.
■Outbox list and detailed Sent Mail display 2 12 5 Outbox list For “Date+sender/ receiver subject” 5 (gray) (pink) Outbox list For “Date+subject” Detailed Sent Mail display SMS report received [List (Date+sender/receiver subject) and detailed display only] 5Attached data The detailed display shows the data volume as well. “ ” is added to each icon when you execute “Delete att. file” (Detailed display only).
■Draft list 1Mail status 2 Ordinary mail (pink) 1 5 12 5 4 File with the UIM security 6Text of mail Simultaneous mail Information ≥See “Mail list display” on page 175 to change a method to display the Inbox/Outbox/ Draft list. ≥When “Name in phonebook” of “Mail list display” is checked, the name stored in the Phonebook is displayed as sender or recipient. However, when the sender’s mail address is “phone number@docomo.ne.
Managing Mail Messages Re-sort in all You can resort mail messages in all Inbox/Outbox folders following the sorting conditions specified by “Auto-sort”. 1YES ≥When the folder applied with Mail security (see page 166) is found, you need to enter your Terminal Security Code. Auto-sort See page 172. Function Menu of the Inbox Folder List/Outbox Folder List Operate folder Add folder Mail Edit folder name You can add a new folder. You can add up to 22 folders to each of “Inbox” and “Outbox”.
Protect Information ≥You cannot delete an i-αppli mail folder if corresponding mail-linked i-αppli exists. If the software program does not exist, you can delete the i-αppli mail folder, but this will delete both folders created in the Outbox Folder list and Inbox Folder list. ≥You cannot re-sort the mail messages in the “Chat” folder and “Trash box” folder.
Mail Search sender/ Search receiver [Inbox/Outbox] Search subject [Inbox/Outbox] Search subject+msg [Inbox/Outbox] You can retrieve mail messages with a mail address or phone number of a sender or recipient. “Search sender” for received mail and “Search receiver” for sent mail are displayed respectively. 1Select an item. Phonebook . . . . . . . . .Call up a Phonebook entry and select a phone number or mail address. Received address . . .Select a phone number or mail address and press Oo( ).
No. of messages You can display the number of stored received mail messages, sent mail messages and draft mail messages. Delete 1YES Delete selected 1Put a check mark for mail messages to be deleted 1l( )1YES Delete read mails [Inbox only] You can delete all the read mail messages in the folder. 1YES Delete all SMS-R [Inbox only] You can delete all the SMS reports. While SMS reports are displayed by the Search Mail function or Filter function, only the displayed SMS reports are deleted.
Move to trash You can move the mail to the “Trash box” folder. The mail [Received Mail only] messages moved to the “Trash box” folder are preferentially overwritten (deleted). 1YES UIM operation Copy to microSD Store in Center Add to phonebook See page 92. See page 168. Color label See page 168. See page 136. Display Mail Save insert image See page 152. Save D-pictograms You can save Deco-mail pictograms in the mail text at once. [Received Mail only] You can save up to 20 of them.
Displaying Sent/Received Mail Record Sent and received i-mode mail messages and SMS messages are stored in Sent Address and Received Address, up to 30 messages each. You can check the list for the mail addresses and phone numbers. When you exchange mail messages with the same mail address or phone number, the older one is deleted. ≥In Dual Mode of 2in1, up to 60 records for Address A/Number A and Address B/ Number B are stored in Received Address in total.
Feel*Mail The Feel*Mail image is played back. See page 177 for Feel [Received Address only] *Mail. ≥You can play back the Feel*mail image also by pressing c( ). Font size You can switch the font sizes for Redial, Dialed Calls, Received Calls, Sent Address, and Received Address. (See “Dialed/recv. calls” on page 120) Redial/Dialed calls [Sent Address only] You can display the Redial list or the Dialed Call list.
Information Enter address ≥When multiple conditions match, sorting is done in the priority below. 1 Sort all 2 Subject sort 3 Reply impossible/Send impossible 4 Address sort (Look-up address/Enter address) 5 Address sort (Look-up mail group) 6 Address sort (Look-up group) ≥Mail messages sent simultaneously to multiple members cannot be sorted by “Address sort” or “Send impossible”. ≥Area Mail messages are not sorted by “Address sort”.
Release selected Release all You can select mail addresses or phone numbers, and release the sort condition for them. (The items are deleted from the Auto-sort Setting display.) 1Put a check mark for mail addresses or phone numbers to be released1l( )1YES You can release all sort conditions. (The items are deleted from the Auto-sort Setting display.) 1YES Mail Information ≥On the Auto-sort Setting display, “ ” is added to the top of the name. ≥You cannot set groups on the UIM.
Mail security Function Menu of the Detailed Mail Group Display/Mail Group Address Confirmation Display Edit address Go to step 3 on page 174. ≥You can edit the address also by pressing l( Auto color label ). You can call up a phone number or mail address in the Phonebook, Sent Address, or Received Address to enter it. 1Select an item. Phonebook. . . . . . . . . Call up a Phonebook entry and select a phone number or mail address. Sent address . . . . . . .
Mail Receiving display You can set whether to display the Message Receiving and Reception Result displays, even during operation of another function. 1Alarm preferred or Operation preferred Alarm preferred . . .Prioritizes the Message Receiving and Reception Result displays when you have new mail. Operation preferred . . .Prioritizes the display of the current operation when you have new mail. Receive option setting See page 156.
Information ≥You cannot paste the header, signature, and quotation marks to Decome-Anime messages and SMS messages. Feel*Mail Feel*Mail reproduces the atmosphere of a mail message by actions of 45 types of animated characters. Once you activate Feel*Mail, a Feel*Mail image is played back after you receive an i-mode mail/SMS message. ≥To end the playback, press h or r.
Mail Information ≥When the FOMA terminal cannot receive any more Messages R/F, “ (dark blue)” or “ (dark blue)” is displayed. Delete unnecessary Messages R/F, read unread Messages R/F or release protection. ≥When the icon “ (yellow)” or “ (yellow)” is displayed, the i-mode Center holds Messages R/F. When the icon “ (dark blue)” or “ (dark blue)” is displayed, the i-mode Center can hold no more Messages R/F. Perform “Check new messages” to receive them.
2Received date and time The list shows the time for the Message R/F received today, and shows the date for the Message R/F received until yesterday. The detailed display shows the date and time the Message R/F was received. 3Subject 4The data attached or pasted The detailed display shows the data volume. Valid melody file Valid image file Display all After you execute “Sort” or “Filter”, you can reset it and list all Messages R/F by “By date ↑”. No.
Add to phonebook See page 92. Delete 1YES Early Warning “Area Mail” Mail This service enables you to receive reports such as emergency earthquake alerts distributed from the Japan Meteorological Agency. ≥You can receive Area Mail messages without i-mode contract.
Setting Early Warning “Area Mail” 1 l1Area mail settings1Do the following operations. You can set whether to use Area Mail. 1Read exemption clause thoroughly1Yes or No Receive entry You can register Message IDs for the reports to be received other than emergency information. You can register up to 20 IDs. ≥You do not need to operate “Receive entry” for receiving only emergency earthquake alert and disaster/evacuation information.
Mail Chat group Mail group Display setting You can store the members stored in a chat group as chat members. 1Group list or Member list Group list . . . . . You can select members by chat group. Member list . . . You can select members from all the members stored in chat groups. ≥If you select “Group list”, select a chat group. The members from the selected group are stored. ≥If you select “Member list”, check the members you want to store and press l( ).
Information 4 5 6 (dark blue): Addresses that are not stored in Chat Member are found. 4Sent/Received date and time The date and time the chat mail message was sent/received are displayed. The time is displayed for the chat mail messages sent/received today and the date for the chat mail messages sent/received until yesterday. 5Text The text of chat mail message is displayed. The number of characters of the text to be displayed is up to 250 full-pitch/500 half-pitch characters.
Mail If you start Chat Mail from the desktop or Chat Group If you start Chat Mail from a mail address or from a chat group that is not stored in Chat Member, the confirmation display appears asking whether to delete stored member and start Chat Mail. Select “YES”; then the current chat members are deleted and the sender’s mail address or chat group members are stored in Chat Member. If you start Chat Mail from the desktop The sender’s mail address is stored in Chat Member.
+m-2-6 Creating Chat Group You can store the mail addresses you want to exchange chat mail per group. By storing multiple members in a group, you can set them as chat members at a time. You can store up to five mail addresses per group. You can create up to five groups. 1 1Enter a chat group name. ≥You can enter up to 10 full-pitch/20 half-pitch characters. Reset group name You can reset the name of the chat group to the default.
5 Composing and Sending SMS Information You can compose and send SMS messages. You can save up to 1,000 sent SMS messages including i-mode mail messages to the Outbox. ≥You can send and receive SMS messages to and from subscribers of overseas carriers other than DOCOMO. For the countries and overseas carriers available for the service, refer to the DOCOMO Global Service web page. ≥You can move/copy the sent SMS messages to the UIM.
Save You can save the SMS message you are composing or editing to the Draft. ≥You cannot save the message when the address field and text field are blank. SMS report req. See page 188. SMS valid. per. See page 188. SMS input char. See page 188. Receiving SMS Automatically ≥You can move/copy the received SMS messages to the UIM. (See page 418) 1 When an SMS message arrives, “ (pink)” lights and the receiving message is displayed.
Information ≥When “ (dark blue)” or “ (dark blue)”, etc. are displayed, you cannot receive any more SMS messages. Delete unnecessary mail, read unread mail, or release protection. (Read and unprotected messages are automatically deleted from the oldest one.) ≥You cannot use this function to receive i-mode mail or Messages R/F. Use “Check new messages” to receive i-mode mail or Messages R/F. SMS Input Character You can set the characters you can enter into the text of SMS messages.
i-mode/i-motion/i-Channel/i-concier i-mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 Displaying a Site Accessing Sites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Viewing and Operating Sites . . . . . . . . . . . . . . . . . . . . . . . . . . . . Displaying Most Recently Accessed Site. . . . . . . . Using My Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changing i-mode Password . . . .
i-mode i-mode is the service that makes use of the display of the FOMA terminal supporting i-mode (i-mode phone) to enable you to use online services such as site (program) access, Internet access, and i-mode mail. i-mode/i-motion/i-Channel/i-concier ≥i-mode is a pay service that is available on a subscription basis. ≥For details on i-mode, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.
To obtain an SSL site (SSL page) The display for establishing authentication appears. When obtaining is completed, the SSL page appears and “ ” lights. ≥To cancel during authentication, select “Cancel”. To cancel obtaining the SSL page after authentication, press l( ). To return to a non-SSL site The confirmation display appears asking whether to close the SSL page. Select “YES” to display an ordinary site; “ ” goes off. Information Change to iMenu in English The iMenu can be displayed in English.
Information Information ≥When you display a page stored in cache, you cannot display text or settings you entered when connected before. ≥When Flash movies are displayed, the site behavior might differ from the one for ordinary sites. ≥Depending on the site, the display authenticating your user ID or password might appear. Enter your user ID and password, and then select “OK”.
Phone/Terminal and UIM ID When you select an item, the confirmation display might appear asking whether to send the Phone/Terminal and UIM ID. The site contents will be updated with the latest information. Save image See page 199. Compose message You can compose an i-mode mail message with the URL/ image of a displayed site/screen memo pasted or attached. 1Select an item. Attach URL . . . . . . . .Pastes a URL to the text of an i-mode mail message. Attach image. . . . . . .
Information i-mode/i-motion/i-Channel/i-concier ≥The number of characters of the URL you can paste to the text is up to 256 half-pitch characters. If the URL contains 256 half-pitch characters or more, you cannot paste it. ≥You may not be able to attach or paste some images to i-mode mail. ≥When characters are not correctly displayed, repeat the operation. However, the previous character is displayed if you repeat the operation four times.
Information ≥If you are using Dual Network Service, you might not be able to use My Menu registered by the mova phone using the FOMA terminal, or My Menu registered by the FOMA terminal using the mova phone. Changing i-mode Password The i-mode password (four digits) is required to subscribe to and unsubscribe from message services and i-mode pay sites, and to do i-mode mail settings. Be sure not to let others know your i-mode password.
Information Function Menu of the URL History List Compose message You can compose an i-mode mail message with the highlighted URL pasted to the text. Go to step 2 on page 142. ≥You can compose it also by pressing l( ). Add desktop icon See page 31. Set as home URL You can store the site as Home URL of Full Browser. 1YES ≥You can operate this only from the URL History list of Full Browser.
All transmission See page 387. No. of bookmarks You can check the number of bookmarks stored in all folders. Delete all The folders are not deleted. 1Enter your Terminal Security Code1YES Function Menu of the Bookmark List Compose message You can compose an i-mode mail message with the highlighted URL pasted to the text. Go to step 2 on page 142. ≥You can compose it also by pressing l( ). You can send an i-mode mail message with the bookmark attached. Go to step 2 on page 142.
i-mode/i-motion/i-Channel/i-concier Information Function Menu of the Screen Memo Folder List ≥Up to 11 full-pitch/22 half-pitch characters are stored for a title. For longer titles, the excess characters are deleted. ≥If you save the data acquisition completion display, its data file is saved as well.
Function Menu of the Detailed Screen Memo Display Compose message You can compose an i-mode mail message also by pressing l( ). (See page 193) Saving Images from Sites Edit title See page 197. Protect ON/OFF See page 198. Save image See page 199. Add to phonebook See page 92. You can save the image displayed on a site or screen memo, and then set it for the Stand-by display, Wake-up display, or another display. You can save images, frames and marks for Deco-mail as well.
i-mode/i-motion/i-Channel/i-concier Information ≥Up to 36 half-pitch characters are saved for a file name. When the file name is not specified, a part of the downloaded URL or “imageXXX” (XXX denotes numerals) is saved as the file name. ≥Even when an image is displayed on the site, it might not be displayed on the Picture viewer after saving it to the FOMA terminal.
2 3 Save1YES1Select a destination folder. Chara-den images, templates (Deco-mail), and schedule events are saved to the FOMA terminal. Select “Phone” or “microSD” for Machi-chara images, Kisekae Tool files, and templates (Decome-Anime). For dictionaries, select “”. ≥Select “Property” to display the information. ≥See page 201 when data files are stored to the maximum. ≥See page 197 to save a screen memo. Select “YES” to set the downloaded data file to each function.
About “P-SQUARE” Operations from Highlighted Information You can download the pre-installed Chara-den images, Machi-chara images, Kisekae Tool files, templates, dictionaries, and Deco-mail pictograms from the “P-SQUARE” site (in Japanese only).
Mail To Function Media To Function You can send mail by using mail addresses or similar information displayed on sites and in mail. You can start 1Seg or set TV Timer/Timer Recording from the information (links) displayed on sites and in mail. 1 1 Select a mail address or similar information. The destination mail address is already entered in the address field. Go to step 3 on page 142.
Setting i-mode i-mode/i-motion/i-Channel/i-concier 1 i1i-mode settings1Do the following operations. Scroll You can set the number of lines that are scrolled for when you use Bo while displaying a site or screen memo. 1Select the number of lines. Font size See “i-mode” on page 119. Set image display You can set whether to display images or Flash movies included on sites or in screen memos. 1ON or OFF Set connection timeout See page 204. Host selection See page 205.
+m-8-1 Operating SSL Certificates Changing a Host from i-mode (ISP Connection Communication) 1 ※Normally, you do not need to change this setting. You can set the host (APN) to use for receiving services other than i-mode (DOCOMO). If you change this setting, you will not be able to use i-mode. 1 i1i-mode settings1Host selection 1Highlight and press l( 1Enter your Terminal Security Code.
Setting FirstPass i-mode/i-motion/i-Channel/i-concier User certificates verify that you have subscribed to the FOMA service. Downloaded user certificates are stored on the UIM for the use on FirstPass sites. When you cannot display a FirstPass site because the user certificate on the UIM has expired or the required user certificate is not stored on the UIM, you can request the issue and download the user certificate from the FirstPass Center.
2 3 Enter your PIN2 code. ≥Enter your PIN2 code within 60 seconds. When the code is not entered within 60 seconds, the connection is cut off as an error entry. ≥See page 122 for PIN2 code. Request Revocation of User Certificate You can revoke the downloaded user certificate. 1 Download1Continue ≥If you do not download the user certificate immediately, select “Menu”. From the confirmation display asking whether to close the SSL page, select “YES” to return to the site display for the FirstPass Center.
2 Default URL 1Enter a default URL. ≥You can enter up to 100 half-pitch alphanumeric characters. Host address 1Enter a host address. ≥You can enter up to 99 half-pitch alphanumeric characters. 3 i-mode/i-motion/i-Channel/i-concier Enter your Terminal Security Code 1Do the following operations. Press l( ). ■Before Using FirstPass ≥FirstPass is DOCOMO’s electronic authentication service.
Downloading i-motion from Sites Play Back i-motion Obtained from a Site Select an i-motion movie from an i-motion obtainable site 1Play 1 Information ≥Depending on the accessed site or an i-motion movie, you might not be able to obtain the data or play it back during obtaining, or play it back after obtaining. Also, you cannot obtain an i-motion movie in ASF format. ≥See page 352 for the file formats of playable i-motion movies.
Setting Automatic Replay of i-motion You can set whether to play back an i-motion movie automatically, for when you have obtained a standard (normal) type of i-motion movie from a site or have selected a screen memo which contains a standard (normal) type of i-motion movie. 1 i1i-mode settings1Automatic replay set.