Information Function Menu of the URL History List Compose message You can compose an i-mode mail message with the highlighted URL pasted to the text. Go to step 2 on page 146. You can compose it also by pressing l( ). Add desktop icon See page 31. Set as home URL You can store the site as Home URL of Full Browser. YES You can operate this only from the URL History list of Full Browser.
All transmission See page 389. No. of bookmarks You can check the number of bookmarks stored in all folders. Delete all The folders are not deleted. Enter your Terminal Security Code YES Function Menu of the Bookmark List Compose message You can compose an i-mode mail message with the highlighted URL pasted to the text. Go to step 2 on page 146. You can compose it also by pressing l( ). You can send an i-mode mail message with the bookmark attached. Go to step 2 on page 146.
i-mode/i-motion/i-Channel/i-concier Information Up to 11 full-pitch/22 half-pitch characters are stored for a title. For longer titles, the excess characters are deleted. If you save the data acquisition completion display, its data file is saved as well. (You cannot save the data acquisition completion display for Chaku-uta Full® music files, for i-motion movies with playable deadline, or for the ToruCa files whose output from the FOMA terminal is prohibited.
Function Menu of the Detailed Screen Memo Display Compose message You can compose an i-mode mail message also by pressing l( ). (See page 197) Saving Image from Sites Edit title See page 201. Protect ON/OFF See page 202. Save image See page 203. Add to phonebook See page 94. You can save the image displayed on a site or screen memo, and then set it as the Stand-by display, Wake-up display, or another display. You can save images, frames and marks for Deco-mail as well.
i-mode/i-motion/i-Channel/i-concier Information Up to 36 half-pitch characters are saved for a file name. When the file name is not specified, a part of the downloaded URL or “imageXXX” (XXX denotes numerals) is saved as the file name. Even when an image is displayed on the site, it might not be displayed on the Picture viewer after saving it to the FOMA terminal.
2 3 Save YES Select a destination folder. Chara-den image, template (Deco-mail), and schedule event is stored to the FOMA terminal. For Machi-chara image, Kisekae Tool file, and template (Decome-Anime), select “Phone” or “microSD”. For dictionary, select “”. Select “Property” to display the information. See page 205 when data files are stored to the maximum. See page 201 to save a screen memo. Select “YES” to set the downloaded data file to each function.
About “P-SQUARE” Operations from Highlighted Information You can download the pre-installed Kisekae Tool file, templates, dictionaries, Chara-den images, and Deco-mail pictograms from the “P-SQUARE” site (in Japanese only).
Mail To Function Media To Function You can send mail by using mail addresses or similar information displayed on sites and in mail. You can start 1Seg or set TV Timer/Timer Recording from the information (links) displayed on sites and in mail. 1 1 Select a mail address or similar information. The destination mail address is already entered in the address field. Go to step 3 on page 146.
Setting i-mode i-mode/i-motion/i-Channel/i-concier 1 i i-mode settings Do the following operations. Scroll You can set the number of lines that are scrolled for when you use Bo while displaying a site or screen memo. Select the number of lines. Character size See “i-mode” on page 123. Set image display You can set whether to display images or Flash movies included on sites or in screen memos. ON or OFF Set connection timeout See page 208. Host selection See page 209.
+m-8-1 Operating SSL Certificates Changing a Host from i-mode (ISP Connection Communication) 1 ※Normally, you do not need to change this setting. You can set the host (APN) to use for receiving services other than i-mode (DOCOMO). If you change this setting, you will not be able to use i-mode. 1 i i-mode settings Host selection Highlight and press l( Enter your Terminal Security Code.
Setting FirstPass i-mode/i-motion/i-Channel/i-concier User certificates verify that you have subscribed to the FOMA service. Downloaded user certificates are stored on the UIM for the use on FirstPass sites. When you cannot display a FirstPass site because the user certificate on the UIM has expired or the required user certificate is not stored on the UIM, you can request the issue and download the user certificate from the FirstPass Center.
2 3 Enter your PIN2 code. Enter your PIN2 code within 60 seconds. When the code is not entered within 60 seconds, the connection is cut off as an error entry. See page 126 for PIN2 code. Request Revocation of User Certificate You can revoke the downloaded user certificate. 1 Download Continue If you do not download the user certificate immediately, select “Menu”. From the confirmation display asking whether to close the SSL page, select “YES” to return to the site display for the FirstPass Center.
2 Default URL Enter a default URL. You can enter up to 100 half-pitch alphanumeric characters. Host address Enter a host address. You can enter up to 99 half-pitch alphanumeric characters. 3 i-mode/i-motion/i-Channel/i-concier Enter your Terminal Security Code Do the following operations. Press l( ). ■Before Using FirstPass FirstPass is DOCOMO’s electronic authentication service.
Downloading i-motion from Sites Play Back i-motion Obtained from a Site Select an i-motion movie from an i-motion obtainable site Play 1 Information Depending on the accessed site or an i-motion movie, you might not be able to obtain the data or play it back during obtaining, or play it back after obtaining. Also, you cannot obtain an i-motion movie in ASF format. See page 354 for the file formats of playable i-motion movies.
Setting Automatic Replay of i-motion You can set whether to play back an i-motion movie automatically, for when you have obtained a standard (normal) type of i-motion movie from a site or have selected a screen memo which contains a standard (normal) type of i-motion movie. 1 i i-mode settings Automatic replay set.
Information Setting How Ticker is Displayed 1 i i-Channel Do the following operations. Channel list Ticker ON/OFF Ticker color set. Reset i-Channel ). Press r You can initialize the ticker information, set “Ticker ON/OFF” to “ON”, and “i-Channel ticker” of “Private window” to “OFF”. Enter your Terminal Security Code YES Information You can perform “Ticker ON/OFF”, “Ticker font size set.”, “Ticker color set.”, “Ticker scroll speed”, and “Reset i-Channel” for each mode of 2in1.
i-mode/i-motion/i-Channel/i-concier ■Before Using i-concier ≥i-concier is pay service which is available on a subscription basis (You need to subscribe to i-mode and Data Security Service to apply for i-concier). ≥The information in this service is provided by DOCOMO or IPs (Information Providers). You are not charged a packet communication fee for receiving the information provided by DOCOMO. You are charged a packet communication fee for receiving the information provided by IPs (Information Providers).
Configuring i-concier Settings 1 i-concier Menu display l(MENU) 設定 (Settings) Do the following operations. iコンシェルとは? You can display an expanation about i-concier. (What is i-concier?) iコンシェルイン You can set delivered contents of information, etc. フォメーション設定 (i-concier information setting) その他共通設定 (Other common seting) i-mode/i-motion/i-Channel/i-concier 自動お預かり/更新 See page 141. 設定 (Automatic store/ update setting) You can perform changing profile or setting when you use the service overseas, etc.
218
Full Browser/PC Movie Displaying Web Pages Designed for PC . . . . . Setting Full Browser . . . . . . . . . . . . . PC Movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Downloading PC Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Playing PC Movies from Data Box . . . . . . .
Displaying Web Pages Designed for PC Full Browser/PC Movie You can browse Internet web pages designed for PCs using the Full Browser function. You can display even the Internet web pages that cannot be correctly displayed by i-mode. However, you cannot display or correctly display some Internet web pages. If you change the style while running Full Browser, the display automatically switches between the vertical display and the horizontal display.
Full Browser Display Full display Full Browser Display About operation by the pointer PC Mode Vo or 3 Bo ” by pressing Oo in Drag Mode, then you can move the 1 1. The pointer switches to “ contents by grabbing it. 3 2. Move the contents by pressing Mo, and press Oo to let the contents off and the pointer returns to “ ”. Press and hold Oo for at least one second to release Drag Mode. (Vo is not available during displaying the pointer.
Switch Display Mode Two modes, “Phone mode” and “PC mode”, are available for the Full Browser display. Full Browser/PC Movie 1 i Full Browser Full Browser settings Display Mode setting Phone mode or PC mode Phone mode . . . .Displays an Internet web page to fit in the display width of the FOMA terminal. You do not need to scroll sideways; you can browse Internet web pages only by scrolling upward and downward. PC mode . . . .
Display a Page Composed of Frames Function Menu of Full Browser Display You can display Internet web pages composed of frames. You can select a frame, and enlarge each selected frame for displaying. 1 From an Internet web page composed of frames Use Mo to highlight a frame, and press Oo( Set as home URL You can set the displayed Internet web page as Home URL. YES Display home You can display the Internet web page set as Home URL. ). In Phone Mode, use Bo to highlight a frame.
Change disp. mode See page 222. Certificate See page 197. CHG wide scr. mode/ RLS wide scr. mode You can switch vertical display and horizontal display. Retry You can play back the displayed animation from the beginning. Set full display See page 225. Key guide Pointer/scroll Display pointer See page 225. Speed See page 225. Focus while scroll See page 225. Information The number of characters of the URL you can paste to the text is up to 512 half-pitch characters.
See page 222. Sound effect setting Set full display You can set whether to display the Full Browser display in full display. ON or OFF You can set the sound volume of effect tones or sounds of the Flash movies included in Internet web pages. Select a sound volume level. Auto NW trans. You can set whether to communicate when the transmission is made automatically while displaying Internet web page. Select an item. YES . . . .Communicates automatically. NO . . . . .Does not communicate automatically.
Reset last URL Check settings You can erase the URL of the Internet web page you viewed last. YES You can check respective Full Browser settings. Full Browser/PC Movie Information When “Off” is set, the operation of flash movies is not available. If you replace the UIM with a new one when “Yes” is set, the setting switches to “No”. Even when “ON” is set, images might not be displayed correctly. In this case, “ ” is displayed.
Delete Cookies 1 i Full Browser Full Browser settings Cookie Delete Cookies Enter your Terminal Security Code YES Setting Referer The referer denotes the link source information. When a referer is sent, the information about from which page you have accessed it is sent to the site. Note that even if your information is detected by a third party by sending a referer, we cannot be held responsible for that.
Downloading PC Movies Playing Back a Streaming Type of PC Movie Select a PC movie from a PC movie obtainable site YES 1 See page 229 for the operation during playback. Playing Back a Download Type of PC Movie Select a PC movie from a PC movie obtainable site YES 1 See page 229 for the operation during playback. If “PC Movie auto-play” is set to “ON”, a PC movie is played back during obtaining. If “OFF” is set, you can play it back by selecting “Play” from the data acquisition completion display.
Information Depending on the line speed, line state, or radio wave conditions, the playback during obtaining might be suspended or the images might blur. You can repeatedly play back the download type of PC movies after obtaining but cannot play back the streaming type of PC movies. If the PC movie has the restrictions on the playable period, you cannot play it back before and after that period.
Operation Full Browser/PC Movie Display previous file※2※3 Key operation Co※4 Select position to play※1※5 Press and hold No. Sound volume adjustment Bo or ※7 You cannot operate this for PC movies with incompatible video data or voice-only PC movies. ※8 Even if you set the icons not to be displayed, the icon such as “ ”, “ ”, “ ” or “ ” appears during communication or when an i-mode mail message or Message R/F comes in.
Information Files with the extension of wvx, wax, asx are the files for which the URL of a PC movie on the Internet is specified. When you select those files saved on the microSD card, streaming or downloading playback starts from the specified URL. ■Icons on the PC Movie list Icon File format WMV, ASF WVX, ASX WMA WAX Icon When you play back a PC movie, the URL or storage location of that file is stored as a history.
Edit title Enter a title. You can enter up to 18 full-pitch/36 half-pitch characters. Reset title You can reset the title to the default. YES Fast The PC movie is played back fast. To cancel it, press l( ). Copy You can copy the PC movie to another folder. Select a destination folder. Rewind The PC movie is played back fast in the opposite direction. To cancel it, press l( ). History info You can display information of the played history. Stop You can end playback.
Position memory You can store a position memory in the PC movie. Operate at the desired position in pause state. Select a position memory number to be stored. You cannot select “Marker to resume”. Description See page 232. Copy URL While playing back a PC movie published on the Internet, you can copy the URL of that PC movie. You can copy up to 512 half-pitch characters for the URL.
234
Camera Before Using Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Shooting Still Images . . . . . . . . . . . . . . . . Shooting Movies . . . . . . . . . . . . . . . . . . . . . . . . Changing Settings for Shooting . . . . . . . . . . . . . . . . . . . . . . . . . Setting Image Size and Image Quality . . . . . . . . . . . . . . . . . . . . Using Bar Code Reader . . . . . . . . . . . . . . .
Before Using Camera Camera Notes for when Shooting Images ・Check the lens for any stain before shooting. If the lens is stained, clean the lens with a soft cloth. If the lens is stained with fingerprints or something oily, you will not be able to focus on a subject, or the stains are reflected on still images or movies you shoot. ・Make sure that you do not let fingers, hairs, or the strap overlap the lens when shooting.
■Operations for shooting Camera Setting and Finder Display Icon menu operation +l White balance -2 Function menu access※1 +i Photo mode -3 Bar code reader※1 +m Image quality -4 Image size -5 High sensitivity (when the outside camera is used) -6 Auto timer※3 -7 Store in※4 -9 Shutter/Save +Oo-0 Tele +Vo Wide +Co Settings for Focus (when the outside camera is used) +Zo Focus function (when the outside camera is used) +Xo Change camera-mode※2 +c .
Page Mail restrict’n (L): Up to 2 Mbytes can be saved. Icon/bar name Icon Photo mode Auto Shooting status During movie recording Movie type set Records only the video. Recordable time Recordable time (estimate) for movies — Icon display / Camera Top icon Switches between ON and OFF Shows the vertical direction of the still image or movie. Zoom bar Brightness 〜 White balance Night mode Backlight Sunset 241 245 246 — / 5M (1944 x 2592 ) / 3.
Icon/bar name Icon Image size (Moviemode) Description Page VGA (640 x 480) 2 Press Oo( 3 Press Oo( HVGA Wide (640 x 352) QVGA (320 x 240) 244 QCIF (176 x 144) Sub-QCIF (128 x 96) High sensitivity ON: Shoots in high-sensitivity mode. OFF: Shoots in normal-sensitivity mode. Focus 245 Face detection Auto 245 Close-up Landscape Key guidance — Display key guidance in horizontal display — Shooting Still Images ) or 0.
2 Camera 3 Press Oo( ) or 0. Continuous shooting starts. When “Continuous mode” is set to “Manual”, press Oo( ) or 0 the number of times of shooting frames. The Post View display for confirmation appears. When “Focus” is set to “Auto” while shooting with the outside camera, shooting starts after the focus operation. To cancel shooting midway, press r. If you shoot in the “Auto” or “Auto bracket” mode of “Continuous mode”, you can cancel also by pressing l( ).
Mirror save See page 239 and page 240. Attach to mail You can save the still image you shot and attach it to an i-mode mail message. Go to step 2 on page 146. You can compose an i-mode mail message also by pressing l( ). Attach location Select an item. By position loc. . . . . Measures the current location (see page 328) and store the location information. After checking the location information, press Oo( ). From loc. history . . . .
Camera 2 Press Oo( ) or 0. Recording starts. When “Focus” is set to “Auto” while shooting with the outside camera, shooting starts after the focus operation. While shooting, the subject is automatically focused regardless of the setting of “Focus”. When you shoot with the inside camera, the horizontally reversed (mirrored) image is displayed, but it is displayed normally when played back. 3 Press Oo( 4 Press Oo( ) or 0. Recording ends. The Post View display for confirmation appears.
Attach to mail Set as stand-by Set as standbyWide You can save the recorded movie and attach it to an i-mode mail message. Go to step 2 on page 146. You can compose an i-mode mail message also by pressing l( ). You can save the recorded movie and set it for the Stand-by display. Store in See page 245. Display size See page 245. File restriction See page 247. Icon See page 246. Cancel You do not save the recorded movie.
Setting Image Size and Image Quality Camera Function Menu of the Finder Display Inside camera/ Outside camera You can switch between the inside camera and outside camera. CHG camera-mode Select a mode. When you select “Continuous mode”, the camera starts in the mode you used last time, “Auto”, “Manual”, or “Auto bracket”. Image size Select an image size. File size setting [Movie Mode only] Select an item. Mail restrict’n (S). . . You can shoot up to 500 Kbytes. Mail restrict’n (L) . . .
Focus At Camera start-up Photo Mode: Face detection Continuous/ Movie Mode: Auto You can set the focus of the outside camera. Select an item. Face detection . . . For focusing on a person’s face Auto . . . . . . . . . . . . For focusing automatically before shooting (See page 243) Close-up . . . . . . . . For focusing on a subject in a short distance Landscape . . . . . . For focusing on a landscape in a long distance “Face detection” is available only in Photo Mode. Img.
Common replay mode You can set a shooting size appropriate for attaching to [Movie Mode only] i-mode mail. YES Image Size is set to “QCIF”, File Size Setting is set to “Mail restrict’n (S)”, and Image Quality (Movie Mode) is set to “Normal”. Icon You can set whether to display icons. ON or OFF Memory info You can display the used memory space (estimate)/number of stored items.
Information When “Image size” is set to a size larger than “HVGA Wide (640 x 352)”, “Fit in display” always applies. When “Image size” is set to “QCIF (144 x 176)” or “Sub-QCIF (96 x 128)”, the image is enlarged two times at both lengthwise and sidewise when it is displayed in “Actual size”. The setting for the Finder display is reflected in the Post View display; however the setting for the Post View display is not reflected in the Finder display.
Using Bar Code Reader Camera You can use the outside camera to scan JAN codes and QR codes and store them as data files. Further, after downloading a compatible i-αppli program, you can scan the code of Code 128 and store it as a data file. From the scanned data, you can make calls, compose i-mode mail messages, and access Internet web pages, and so on. ■When scanning with Bar Code Reader Take the character strings as large as possible within the guide frame.
3 ). Function Menu of the Scanned Code Result Display The code is scanned. (The shutter tone does not sound.) To cancel scanning, press r or Oo( ). When scanning is completed, the scanning completion tone sounds and the Call/ Charging indicator lights. The sound level is fixed and cannot be changed. However, the tone does not sound in Manner Mode or while “Phone” of “Ring volume” is set to “Silent”. “ ” is displayed for melody files and “ ” or “ ” is displayed for incompatible or damaged files.
Save image Camera Save melody You can save the scanned image data to set to the Stand-by display or other displays. Select a destination folder. Go to step 3 on page 203. e sho when images are stored to the maximum. You can save the scanned melody data to set it as a ring tone or other tones. YES Select a destination folder. Go to step 3 on page 205. Select “ ” to play back the melody. See page 205 when melodies are stored to the maximum. Save ToruCa You can save the scanned ToruCa file.
1Seg 1Seg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Before Using 1Seg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting Channels . . . . . . . . . . . . . . . . . . . . . Watching 1Seg . . . . . . . . . . . . . . . . . . . . . . . . . Using i-αppli Program Guide. . . . . . . Using Data Broadcasting . . . . . . . . . . . . Using TV Link . . . . . . .
1Seg 1Seg 1Seg is the terrestrial digital TV broadcasting service for mobile objects, and it broadcasts data as well as video and audio. Further, by using i-mode, you can obtain the detailed information, can participate in quiz programs or can have fun with TV shopping. For details on the 1Seg service, browse to the web page as follows: The Association for Promotion of Digital Broadcasting From personal computers: http://www.dpa.or.jp/english/ From i-mode: http://www.dpa.or.
Before Using 1Seg How to Watch a 1Seg Program When you watch a 1Seg program for the first time 1 Channel Setting Store the channel list for the area you use. (See page 254) 2 Activating 1Seg Activate 1Seg. (See page 255) Information 1Seg is not available while “USB mode setting” is set to “microSD mode” or “MTP mode” and the FOMA terminal is connected to a personal computer. 1Seg might automatically start when you end a call by closing the FOMA terminal during a call.
Information Setting Channels To watch 1Seg programs, you need to execute Channel Setting and to select a channel list in advance. You can store up to 10 channel lists. The broadcasting stations you can receive differ depending on the local area. If you store a channel list of the area for traveling or business trip, you can watch programs in the area just by selecting the channel list.
Delete Select Channel List You can select a channel list to set the broadcasting stations you receive. Also, you can edit the channel list already stored. 1 m 1Seg Channel list Select a channel list. The channel list you receive Remote-control number is set, and the detailed display appears. Select a broadcasting station to watch a 1Seg program. When you select “Disp.Ch.
■About Viewer display (When “Switch display” is “V. img+Caption+DBC”.) 1Seg Vertical display Horizontal display Guide display Video “ ” appears on the upper right of the display when the data broadcasting linked with a 1Seg program is found while you are watching on the horizontal display or in the multiwindow. Caption You can set display position of the caption on the horizontal display by “Caption posit. in w-scr”.
Operation Key operation Program info l(for at least one second) Program info (outline) d Switch display d while displaying program information (outline) Each time of pressing from the horizontal display switches the setting of “Icon” and “Caption posit. in w-scr”. Switch display directions/ Full display c※3 In Video Mode, each time of pressing switches the display directions. In Data Broadcasting Mode, each time of pressing switches between the normal display and the full display.
Reload contents You can reload the data broadcasting site being displayed. The confirmation display appears asking whether to re-send the data you entered, depending on the site. Certificate See page 197. Set image display See page 208. Sound effect See page 269. ToruCa from dataBC See page 325. Reset settings See page 269. TVlink list Compose message You can display the TVlink list. (See page 261) See page 259. Switch display At 1Seg start-up When “Caption” is set to “ON”: V.
Information In the following cases, the Off Timer confirmation display appears after each operation finishes. ・During recording standby for Timer Recording ・During recording by Timer Recording ・When a still image is being saved ・When an unsaved image is left ・During channel search by Auto Channel Setting Send i-mode Mail while Watching You can compose and send i-mode mail messages while watching a 1Seg program.
Information Even if “Mail ticker display” is set to “Sender+subject”, the titles are not displayed for Messages R/F, i-mode mail messages, and SMS messages received from the parties not stored in the Phonebook. Even when you show the detailed Received Mail display by Multitask while you are watching a 1Seg program, the display appears in the multiwindow.
Information While the data broadcasting or data broadcasting site is displayed, the confirmation display might appear asking whether to send the contents you entered on the site or whether to permit obtaining mobile phone information. When you select “YES (default)” from the confirmation display for data broadcasting, the information on data broadcasting might be automatically updated, and you might be charged a packet communication fee while watching a 1Seg program or playing back a video.
■Icons in the TVlink list Icon Record Video Format Description Memo information Displays memo information. Link communication contents Connects to the data broadcasting site. (Video and caption are not displayed.) i-mode contents Connects to the i-mode site. Full Browser contents Connects via Full Browser. The recorded video is saved to the microSD card (“Data box”→“1Seg”→“Video”). See page 360 for playing back the recorded video. You cannot save the recorded video to the FOMA terminal.
Information Record Still Images The recorded still images are saved to your FOMA terminal (“Data box”→ “1Seg”→“Image” folder). You can save up to 3,500 files in total sharing the memory space with other data files, however, the number of files you can save decreases depending on the data volume. (See page 534) See page 346 for displaying the recorded still image files. You cannot save still images to the microSD card. 1 Viewer display p The confirmation tone sounds, and the still image is saved.
Repeat Select a type of repeat. If you select “Select day”, put a check mark for days of the week to be set and press l( ). The item set with repetition is counted as one item. Alarm Select an alarm method. ON. . . . . . . . . . . .Alerts you at the time set for the start date/time comes. The setting for alarm notification is completed. ON/Set time . . . .Alerts you at the time set as the prenotification. OFF. . . . . . . . . . .Does not alert. The setting for alarm notification is completed.
Repeat Select a type of repeat. If you select “Select day”, put a check mark for days of the week to be set and press l( ). The item set with repetition is counted as one item. You can set whether to sound alarm at the specified time of timer alarm. ON or OFF Volume Use Bo to adjust the volume. You cannot set the volume to “Step”. Priority You can set a recording operation for when the start date/time arrives while operating a function which cannot be started up simultaneously.
Information “ ” appears on the viewer display during recording by Timer Recording. The audio from a 1Seg program is not output during recording started by Timer Recording. You can output the audio by pressing -r or adjusting the sound volume, however. 1Seg Function Menu while the TV Timer List or the Timer Recording List is Displayed New Go to step 1 of “TV Timer List” on page 263 for TV Timer. Go to step 1 on page 264 for Timer Recording.
Information When you set “Alarm setting” to “Alarm preferred” for the setting of TV Timer/Timer Recording and the alarm time comes while you are dialing, the alarm sounds after you call up the other party. When the alarm time comes while ringing, the alarm sounds after you start talking.
Mail ticker display Recording Result You can display up to 20 recording results from the latest one. 1 m 1Seg Recording result Select a recording result. To delete all recording results, press i( ), enter your Terminal Security Code, and select “YES”. Settings 1Seg 1 m 1Seg User settings Do the following operations. Display 1Seg Caption Video Mobile W-Speed The outlines of images are automatically corrected so that you can watch more smooth videos of 1Seg programs.
Listening Equalizer You can set sound effect for listening for the sound from an earphone or Bluetooth device. Select an item. Surround . . . Makes the sound natural and stereophonic. Natur 1/2 . . . Complements the cooped-up feeling specific to earphones and plays back natural sound. Select 1 or 2 according to your taste. OFF. . . . . . . . Sets Listening to “OFF”. You can change the quality of the sound from an earphone or Bluetooth device. Select an item. Normal . . . . .
Reset storage area i( ) Delete Delete this or Delete all Delete this. . . . Deletes only the information of the affiliated broadcasting stations you selected, from the broadcasting storage area. Delete all . . . . . Deletes the information of all affiliated broadcasting stations created in the broadcasting storage area. YES If you select “Delete all”, you need to enter your Terminal Security Code. Reset TV settings You can reset each of “User settings” to the default.
Music Music&Video Channel Music&Video Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Playing/Operating Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . 272 272 274 MUSIC Player Playing Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Saving Music Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Music Music&Video Channel Setting Programs Music&Video Channel is a service which automatically delivers up to about one-hour programs at night by just setting your favorite music programs in advance. Further, you can enjoy high-quality movie program of up to about 30 minutes. Programs are updated periodically and you can enjoy the delivered programs at your convenient time such as on commuting.
Information Obtain a Program Manually “ ” appears on the Stand-by display when the automatic program obtaining fails or the program is not updated even after the program distribution date. When the automatic obtaining fails, you can manually obtain the program. 1 Music&Video Channel display Select a program YES For a partially obtained program, select “Play” to play it back. For a program which has not been updated, select “Play” to play it back. See page 205 when data files are stored to the maximum.
Playing/Operating Programs You can enjoy playing back programs in stereo sound by connecting the Flat-plug Stereo Earphone Set (option). Also, you can enjoy playing back programs wirelessly by using a commercial Bluetooth device. (See page 427) Music 1 m MUSIC Music&Video Channel Select a program. “ ” is displayed while Music&Video Channel is activated, and “ ” is displayed when the program shifts to pause state during Play Background.
…Stereo/Monaural Operation : Stereo : Monaural …Listening (No indication for “OFF”) : Surround : Natur2 …Icon of Bluetooth connection (No indication for not connected) : Being connected …Sound volume ■Operation while playing back a Music&Video Channel program Operation Key operation Halt l( ) Pause Oo( ) or p Oo( Sound volume adjustment Equalizer 7 Each time of pressing switches in order of “Normal” → “H.BASS1” → “H.BASS2” → “Train”. ※ You cannot operate during pause.
Depending on the program, its playable time zone is fixed. “ ” is added to the icon of the program with time zone restrictions. The time follows the time information obtained from the network. When obtaining a periodically-updated program fails, “ ” appears to tell the program has not been updated. “ ” disappears when obtaining the program starts. The file restriction is set to all the Music&Video Channel programs. See page 247 for the file restrictions.
Delete/Delete this You can delete the program. YES Delete all You can delete all the programs stored in the “Saved program” folder. Enter your Terminal Security Code YES Listening You can set sound effect for listening for the sound from an earphone or Bluetooth device.. Select an item. Surround . . . .Makes the sound natural and stereophonic. Natur 1/2 . . . .Complements the cooped-up feeling specific to earphones and plays back natural sound. Select 1 or 2 according to your taste. OFF . . . . . .
Playing Music You can play back music files on your FOMA terminal by using MUSIC Player or i-motion player. ■MUSIC Player (See page 280) By “MUSIC Player” of “MUSIC”, you can play back Chaku-uta Full® music files or music files saved from music CDs to the microSD card via a personal computer. You can display mail, i-mode sites, and so on, while listening to music by MUSIC Player (Play Background). See page 505 for the combination patterns that can be started.
Information You can save up to 5 Mbytes per Chaku-uta Full® music file. When the Uta-hodai music file set for the ring tone or alarm tone needs to be updated because the playable deadline has expired, the default tone sounds when a call comes in, or an alarm sounds/vibrates. For a Chaku-uta Full® music file that has restrictions on the number of playbacks, playable period, or playable deadline, “ ” is displayed at the head of the title.
Save Music Files by Using SD-Audio By using SD-Jukebox (commercial item), you can save the music files on the music CDs to the microSD card as AAC format data. By using the microSD card adapter (option), you can save music files to the microSD card directly from a personal computer as well. ※The following steps are an example for when the FOMA terminal is used as a microSD reader/writer for saving music files.
1 The Player Menu display appears. When the information about the previously played Player Menu display music file remains, the playback starts according to the position to play or mode of the information. You can play back also by pressing and holding p for at least one second with the FOMA terminal closed. 2 Select an item. All tracks. . . Displays all the music files saved on the FOMA terminal and microSD card. Artist . . . . . . Displays all the artist names.
3 Manage Folders or Music Files m Data box MUSIC 1 Music Folder list Music 2 Select an item. MUSIC Player. . . MUSIC Player starts. (See page 281) i-mode. . . . . . . . . Displays the i-mode (Chaku-uta Full®) Folder list. Select a folder. WMA . . . . . . . . . . Displays the WMA list. Each time you press m from the i-mode (Chaku-uta Full®) Folder list, you can switch between the folders in the FOMA terminal and the microSD card.
■Operations of MUSIC Player in use Operation Halt Key operation l( Pause Oo( You can operate them when the FOMA terminal is closed as well. ) Oo( ) or p to play back ) or p Oo( From the playback display during using MUSIC Player, you can operate the following by using the switch of the Flat-plug Stereo Earphone Set (option) or the Flat-plug Earphone/Microphone with Switch (option): Operation Press once. To play back, press again. Replay next file Press twice in succession.
■Icons on the Music list When you select a music file from “MUSIC→MUSIC Player”, the following icons are displayed: Icon Description All Chaku-uta Full® music files are set with file restrictions. See page 247 for file restrictions. Icon ※ Stored in the FOMA terminal Acquired source Sites ※For the copyrighted file movable to the microSD card, “ ” is displayed.
Information In the following cases, the playback pauses and resumes after you finish each operation: ・ When you make/receive a voice call, videophone call, or PushTalk call ・ When you receive a mail message or Message R/F while “Receiving display” is set to “Alarm preferred” or the Stand-by display is shown ・ When an alarm of “Alarm”, “Schedule”, “ToDo”, “TV timer” or “Timer recording” sounds Depending on the event which occurred, the confirmation display might appear asking whether to end MUSIC Player.
Set as ring tone Fullsong ring tone Point ring tone Music Music info Add to playlist You can set a full piece of Chaku-uta Full® music file as a ring tone. Select an item. For a Chaku-uta Full® music file on the microSD card, the confirmation display appears asking whether to move it to the FOMA terminal. (See “Move Files from the microSD Card to the FOMA Terminal” on page 376.) You can set a part of Chaku-uta Full® music file as a ring tone. Select a range to be set Select an item.
Display image Display lyric You can display jacket images stored in the music file. When multiple jacket images are stored, press No to display a previous or next jacket image. When the image is storable, press Oo( ) and select “YES”, then select any destination folder to save it. You can display lyric images stored in the Chaku-uta Full® music file. When multiple lyric images are stored, press No to display a previous or next lyric image. You can display up to seven lyric images.
Music Equalizer You can change the quality of the sound from an earphone or Bluetooth device. Select an item. Normal . . . . .Reproduces normal sound quality. H.BASS1. . . .Enhances bass sound. H.BASS2. . . .Enhances bass sound more deeply than H.BASS1. Train . . . . . . .Minimizes abnormal sound that causes sound leakage. Music info See page 286. Connect to URL See page 286. Display image/ Display lyric/Player You can change the playback display. Display image . . .
Create Playlist Player Menu display Playlist Function Menu of the Playlist List 1 Playlist list 2 i( ) Create playlist Select a type and display the Music list Put a check mark for music files to be stored l( ) The music files are stored in the displayed order. 3 You can show the Player Menu display. Play mode setting See page 285. Create playlist See page 289. Copy playlist Enter a playlist name. You can enter up to 18 full-pitch/36 half-pitch characters.
Function Menu of the Music List of a Playlist Player menu You can display the Player Menu display. Playback state continues even when you show the Player Menu display. Play mode setting See page 285. Music info See page 286. Add See page 289. DEL from playlist You can release the music files from the FOMA playlist. Select a deleting method. DEL one from list . . . . . . You can release the music file. DEL some from list. . . . . Select the music files to be released, and press l( ).
i-αppli/i-Widget i-αppli . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Downloading i-αppli from Sites . . . . . . . . . Starting i-αppli . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting i-αppli . . . . . . . . . . . . . . . . . . . . . . . . Starting i-αppli Automatically . . . . . . . . . . . . . . . . . . . . . . . . . . . Using i-αppli Call . . . . . . . . . . . . . . . . . . . . . . . . . . . .
i-αppli By downloading i-αppli programs from sites, you can use the FOMA terminal more conveniently. Some i-αppli programs enable you to directly store data in the Phonebook or Schedule and some are linked to Data Box to save/obtain images. Also, you can enjoy playing the large capacity mega i-αppli such as high-resolution 3D games and full-length role playing game or i-αppli online compatible i-αppli programs such as match games and chat application program.
Information Display Software Info You can display software information when downloading i-αppli. 1 m1i-αppli1iαppli settings1Disp. software info 1Display or Not display Starting i-αppli 1 i(for at least one second) 1Select a software program to be started.
You can display the Software list on the microSD card by m i-αppli iαppli(microSD) Software list. Each time you press c( ) from the Software list in the FOMA terminal, the display format changes. When you start an i-αppli DX program or while it is running, the confirmation display might appear asking whether to permit the i-αppli DX program to use the FOMA terminal’s information and functions.
Information To creators of i-αppli If you encounter an error while creating a software program, the Trace Information display might help identify the problem. For how to check the trace information, see “Trace Information” on page 295. You can show the information of i-αppli by -m i-αppli About iαppli. Motion tracking The FOMA terminal supports “Motion Tracking” which enables you to operate i-αppli programs (by inclining or swinging the FOMA terminal) through the recognition technology of the camera.
i-αppli/i-Widget Change mld./img. You can set whether to permit the i-αppli program to change the setting for the ring tones, Stand-by display, etc. This function is available only for i-αppli DX programs. ON, OFF or Check every change l( ) If you select “Check every change”, the confirmation display appears each time the i-αppli program tries to change the setting for the ring tones, Stand-by display, etc. See P. book/hist.
When you delete mail-linked i-αppli The confirmation display appears asking whether to delete the i-αppli mail folder as well. If you do not delete it, you can check the text of mail from the Outbox/Inbox list. YES . . . . . . Deletes both the software program and the i-αppli mail folder. NO. . . . . . . Deletes the software program only and the i-αppli mail folder is left. Cancel . . . . Does not delete both the software program and i-αppli mail folder; the former display returns.
キングダムハーツコーデッド (Kingdom Hearts Coded) You can play pre-installed only episode of “Olympus Colosseum” that is a world of “Kingdom Hearts Coded”. Further, you can also play an introduction for main story “Traverse Town Special Edit Version” by upgrading. This is a fantasy adventure puzzle game to advance the story by solving puzzles asked by the inhabitants of the curious village. In the complete version, you can enjoy the whole story and mini games with animations and voice of characters. © Disney.
ファミリー伝言板 (Family Message Board) Family Message Board is an application program that enables you to share memorandums or schedule events with your family or friends. By registering you as a member and joining a group, you can share entered memorandums or schedule events with members of same group. Further, you can check memorandums or schedule events of your group by using compatible TV. You are separately charged a packet communication fee.
ぷよぷよ!ウィジェット (Puyo-puyo! Widget) You can start up and play on the i-Widget program. In a separate display, you can enjoy playing the easy puzzle deletion game called “ぷよぷよ (Puyo-puyo)”. In this game, you connect the same color of four puyo falling from the top and delete them. In a list display, a auto demo is played back and you can learn how to make “連鎖 (a chain of deletion)”. © SEGA 1 2 Software list ぷよぷよ!ウィジェット (Puyo-puyo! Widget) Select a menu. ゲームスタート (Start game). . . Start the game.
2 Select a dictionary to be used. 日英版/日中版 しゃべって翻訳 for P (J-E/J-C Speech Translation for P) Just by speaking a phrase to be translated into your FOMA terminal, this application program translates it from Japanese to English or Chinese and vice versa. You can use all the functions charge free for 60 days from when you start using this application program. Some phrases available for translation are restricted on and after the 61st day.
5 Select a menu item. 日→英 翻訳 (Translate Japanese to English) . . . Starts translation from Japanese to English. 英→日 翻訳 (Translate English to Japanese) . . . Starts translation from English to Japanese. 日→中 翻訳 (Translate Japanese to Chinese) . . . Starts translation from Japanese to Chinese. 中→日 翻訳 (Translate Chinese to Japanese) . . . Starts translation from Chinese to Japanese. シーンを変更 (Change scene) . . . Select a scene suitable for words to be translated.
iD設定アプリ (iD Setting Application) DCMXクレジットアプリ (DCMX Credit Application) Chargeless electronic money “iD” is a service that enables you to do shopping by placing your Osaifu-Keitai or a credit card with “iD” mounted over a scanning device. You can do shopping easily and conveniently without signing. Depending on the card publishing company, cashing is also supported.
For service contents and details of subscriptions, refer to the i-mode site of DCMX (in Japanese only). ・i-mode site: iMenu→DCMX iD 地図アプリ (Map Application) QR code for accessing the site Information To start this application program for the first time, you need to agree with “ご利用上の 注意 (Cautions in use)”. You are charged a packet communication fee for settings and operations. ■Cautions on Osaifu-Keitai compatible i-αppli Note that we take no responsibility for any information set on your IC card.
マクドナルドトクするアプリ (McDonald’s Valuable Application) Start! i-Widget “Start! i-Widget!” is an application program that enables you to watch how to use i-Widget with a movie. Further, you can connect to i-mode to call up the site downloadable other than application stored in the FOMA terminal. ≥You are charged a packet communication fee when you select “ダウンロード (Download)” and connect to i-mode. ※The display is for reference. The actual one may differ.
Suicaスタートアップアプリ (Suica Start-up Application) iWウォッチ (iW Watch) “iWウォッチ (iW Watch)” is an application pragram that enables you to enjoy a graphical watch in i-Widget. You can change the design and color of it depending on your taste. ※The display is for reference. The actual one may differ. 株価アプリ (Stock Prices Application) アバターメーカー (Avatar Maker) i-αppli/i-Widget Main functions of Avatar Maker ■Creating avatar You can create a portrait avatar easily by using various parts prepared by Avatar Maker.
検索&ランキングアプリ (Search & Ranking Application) Setting i-αppli 1 m i-αppli iαppli settings Do the following operations. Auto start setting See page 308. Disp. software info See page 293. i-Widget roaming set. See page 313. i-Widget sound effect See page 313. iαppli call settings iαppli call DL set. See page 310.
αPower saver αVibrator Check settings You can set to Power Saver Mode to decrease battery consumption by suspending the i-αppli program temporarily for when you close the FOMA terminal during i-αppli running. ON or OFF This setting is valid from when an i-αppli program starts until it closes. Even when this function is set to “ON”, Power Saver Mode becomes invalid if “Power saver” that can be set for each i-αppli program is set to “OFF”.
Information Software programs do not start automatically in the following cases: ・When the FOMA terminal is turned off ・When the date and time are not set ・When another function is working ・During Lock All ・During Personal Data Lock ・During playback of animations/Flash movies ・When the time set for automatic start is identical to the reserved time set for “Software update”, or the time set for an alarm of “Alarm”, “Schedule”, “ToDo”, “TV timer”, or “Timer recording” ・When a start time has been specified to
Check i-αppli Call Logs Up to 30 logs of received i-αppli call are stored in i-αppli call logs. You can check the reply state. ≥When more than 30 i-αppli calls are received, the older logs are automatically deleted. However, the logs on holding i-αppli call are not deleted. (But they are deleted if all the logs are the logs of on hold i-αppli call.
Operating i-αppli Stand-by Display Software Setting (Stand-by Set) You can set an i-αppli program for the Stand-by display. Once set, the i-αppli Stand-by display automatically appears each time you show the Stand-by display. 1 Software list i( ) Software setting Stand-by set ON or OFF l( ) “ ” is displayed for the software program set as the Stand-by display.
End Stand-by Info When the i-αppli Stand-by display does not end successfully, you can check the date/time and its reason. 1 m1i-αppli1iαppli info1End stand-by info ≥When “ ” is displayed on the End Stand-by Info display, press i( ), and select “Copy info” to copy the information. Select “Delete info”, and select “YES” to delete the information. Displaying i-αppli Data Files on the microSD Card Depending on the i-αppli program, you can save its data files on the microSD card.