P-01H INSTRUCTION MANUAL ’15.
Thank you for selecting the “P-01H”. Read this manual before use to correctly operate your P-01H. About manual of P-01H Basic Package The operating procedures for the P-01H are also published as in P-01H Handset (With Warranty) Desktop Holder P55 “使いかたガイド (Guide)” on-screen manual installed onto your FOMA terminal, and “Instruction Manual (Detailed Version)” as a PDF.
Online various procedures, the content confirmation of your contract, etc. From this FOMA terminal ｉMenu ▶ お客様サポート (User support) ▶ お申込・お手続き (Applications/Procedures) ▶ ドコモオンライン手続き (DOCOMO online procedures) (Packet communication charges free) (In Japanese only) ※Accessing from overseas may incur charges. From PC My docomo (https://www.nttdocomo.co.
General Inquiries Repairs 0120-005-250 ■ From DOCOMO mobile phones ■ From land-line phones (toll free) (In Japanese only) * Service available in English, Portuguese, Chinese, Spanish. * Unavailable from part of IP phones. (Business hours: 9:00 a.m. to 8:00 p.m.) (No prefix) ■ From DOCOMO mobile phones ■ From land-line phones (In Japanese only) (No prefix) 151 (toll free) * Unavailable from land-line phones, etc.
Contents FOMA Terminal ······························ 2 Part Names and Functions ············ 3 Precautions···································· 5 Handling Precautions ·················· 13 Waterproof/Dust-proof Performance ··· 17 Introduction ▶ P.
Introduction FOMA Terminal 2 This FOMA terminal supports W-CDMA system. Because the FOMA terminal uses radio waves, you cannot use it in places where the radio waves do not reach, where they are weak even outdoors, such as inside tunnels, basements, or buildings, or out-of-service area. You might not be able to operate the FOMA terminal even when you are in a place with a fine view such as in a high-rise building or apartment.
Part Names and Functions ❷ ❶Air vent For adjusting the pressure inside the FOMA terminal ❷Earpiece For listening to the other party’s voice ❸ ❸Display Microphone For speaking to the other party ❹oCommand navigation key For operating functions and menus cCamera key/1Seg key ❺mMenu key For showing the Main Menu ❹ ❺ ❻ ❼ ❽ Light sensor For sensing brightness (Do not cover it with your hands or do not put a sticker on it. Doing so might disable detecting the brightness.
Introduction Call/Charging indicator Lights while you are receiving a call or message, or charging. Sub-display FOMA antenna※ Infrared data port For using infrared communication and the infrared remote control fmark An IC card is installed. Use it for Osaifu-Keitai or iC communications. Speaker Back cover Remove this when attaching/removing the battery pack, docomo mini UIM card, and microSD card.
Precautions ALWAYS FOLLOW THESE DIRECTIONS Danger This symbol indicates that incorrect handling will almost certainly cause death or serious injury. Warning This symbol indicates that incorrect handling poses a risk of causing death or serious injury. Caution This symbol indicates that incorrect handling poses a risk of causing a slight injury or damage to the product or property. ■ The following symbols show specific directions: Denotes actions prohibited to do.
Introduction General precautions for FOMA terminal, batteries, adapters, desktop holder, and docomo mini UIM card Danger Don’t Don’t Do not use, store, or leave the FOMA terminal or its accessories in places with a high temperature or where heat can be easily trapped (such as near fire, near heating appliances, inside a kotatsu, under a comforter, or near other furniture with heating elements, in places exposed to direct sunlight, or in cars heated by the sun).
Do Caution Don’t Don’t Do Do not place the FOMA terminal or accessories on unstable locations such as wobbly tables or slanted locations. They may fall off and cause injury. Do not store in humid or dusty places, or in high temperature environments. Fire, burns or electric shock may result. Do Do Keep out of the reach of babies and infants. Accidental swallowing, injury or electric shock may result. Take care when the FOMA terminal is used for a long time or is being charged.
Introduction Do Do Turn off the FOMA terminal or set Self mode, when you board an airplane. For use restriction on an airplane, make sure that you comply with their regulations. If the Auto power ON function is set, deactivate the setting. Otherwise, the electronic devices of airplane may be adversely affected. Engaging in any prohibited acts such as using the FOMA terminal on an airplane is punishable by law. For use in hospitals, make sure that you comply with their regulations.
Caution Don’t Don’t Don’t Do not use the FOMA terminal if it has been damaged. Fire, burns, injury or electric shock may result. If you accidentally damage the display part and the substance inside leaks out, keep your face, hands and skin away from it. Otherwise, you may impair your eyesight or damage your skin. If this substance should get into your eyes or mouth, immediately rinse them with clean water, and then seek medical attention.
Introduction Don’t Do Do not use excessive force, for example by piercing it with nails (or any sharp objects), hitting it with a hammer (or any hard objects), or stepping on it. Otherwise, the battery pack may ignite, burst or overheat and its electrolyte may leak, causing fire, burns or injury. If the battery fluid or other material gets into your eyes, do not rub them. Flush your eyes with clean water and seek medical attention immediately. Otherwise, the loss of eyesight may result.
Precautions for adapters and desktop holder Warning Don’t Don’t Don’t Don’t Don’t Do not use the adapter and desktop holder in humid places such as a bathroom. Fire, burns or electric shock may result. The DC adapter is for use only in a negative (-) grounded vehicle. Do not use it in a positive (+) grounded vehicle. Fire, burns or electric shock may result. If a thunderstorm is nearby, do not touch the adapter. Otherwise, you may receive an electric shock.
Introduction When unplugging the power plug from the power outlet or cigarette lighter socket, do not use unnecessary force, for example by Do pulling the adapter cord. Take hold of the adapter to unplug it. Pulling the adapter cord may cause damage to it. Fire, burns or electric shock may result. When inserting or pulling the adapter into or out of the FOMA terminal, do not use unnecessary force, for example by pulling the Do cord.
List of materials used ■P-01H Handset/Back Cover P63/Battery Pack P32 Connector Fitting pin area terminal cover Packing Body Panel of camera lens area, Display panel, Sub-display panel Charging terminal Material/Finishing PC/UV coating Resin part Submerge decision seal Terminal area Label docomo mini UIM card insert part Stainless steel/ nickel plating, tin plating Polyester series elastomer Silicon rubber PC/UV coating PMMA/hard coating Brass/nickel plating, nickel palladium plating, gold plating Ke
Introduction 14 ■Use a dry soft cloth such as the one for cleaning glasses to clean the equipment. The display may be scratched if it is rubbed hard with a dry cloth. Stains may result from droplets of water or dirt if they are left on the display. Do not use alcohol, thinner, benzene, detergent or other solvents for cleaning, otherwise the printing may be removed or discoloration may result. ■Occasionally clean the terminals of the equipment using a dry cotton swab, etc.
■ Do not use the DC adapter for charging the ■Do not drop the docomo mini UIM card battery when the car engine is not running. or subject it to strong impacts. Malfunction may result. The car battery could go flat. ■When using the power outlet having the ■Do not bend the docomo mini UIM card disengaging prevention mechanism, or place something heavy on it. observe the instructions given in that Malfunction may result. instruction manual. ■Into the FOMA terminal, do not insert ■Do not give a strong shock.
Introduction ■Radio frequencies The radio frequencies for the Bluetooth function of the FOMA terminal are as follows: 16 ■Cautions on Using Bluetooth Devices Bluetooth operates at radio frequencies assigned to the in-house radio stations for mobile object identifiers that have to be licensed and are used in production lines of a factory, specific unlicensed low power radio stations, and amateur radio stations (hereafter, referred to “another radio station”) in addition to scientific, medical, industrial dev
Waterproof/Dust-proof Performance Sea/pool Introduction Your P-01H is capable of IPX5※1 and IPX7※2 waterproof performance and IP5X※3 dust-proof performance if the connector terminal cover and back cover are firmly closed and no clearance gap and float found in them. ※1 IPX5 means that the P-01H maintains its performance as a phone even after a water jet flow has been sprayed over the FOMA terminal from all directions under conditions where water in a volume of 12.
Introduction Opening/Closing the Connector Terminal Cover Removing/Attaching the Back Cover ■Opening the connector terminal cover ① Hook your fingertip over the groove, pull out the cover to direction A, and rotate it as direction B. ■Removing the back cover ① Hook your fingertip over the concave part of the FOMA terminal, lift up in the direction of the arrow to remove the back cover.
Caution ･ Even the slightest sands entered from the connector terminal cover or back cover could cause water or dust to enter the inside of the FOMA terminal. ■About the connector terminal cover and back cover Do not open or close them with gloves put on hands. Fine dirt might adhere to the contact surface of the packing. Be careful that no fibers adhere to the packing when you try to wipe off moisture with a clean dry cloth. Do not peel the packing off.
Introduction If you operate the FOMA terminal with water drops left adhered to, the volume level from the speakers might be decreased or sound quality vary. Moisture may have entered inside through the clearance gap of the keys or hinges.
Before Using When you remove the docomo mini UIM card Pull out the tray, and then slide the docomo mini UIM card slowly to pull it out. After pulling out the tray until about half of the docomo mini UIM card is visible, pull out the docomo mini UIM card by sliding it out. Attaching docomo mini UIM card/ Battery Pack To insert the docomo mini UIM card/battery pack, remove the back cover and insert. (See page 18) Insert the docomo mini UIM card. 1.
4 Charging Charging Using Desktop Holder Call/Charging indicator AC Adapter’s plug Basic Operation Engraved surface Charging Using AC Adapter Power socket Power socket AC Adapter’s plug Call/Charging indicator Connector terminal Cover AC Adapter AC Adapter Engraved surface Connector Release buttons Desktop Holder 1 Connector With the engraved surface of the connector of the AC Adapter (option) face up, plug the connector straight into the connector terminal of the desktop holder provided unti
Confirm the direction of FOMA terminal, and then set it onto the desktop holder. Damage could result if you try to set it onto desktop holder forcibly. For detaching, pull out the connector horizontally while pressing the release buttons. Malfunction could result if you try to pull it forcibly. When charging starts, the Call/Charging indicator lights in red. When charging is completed, it turns off. 1 Press and hold h for at least one second.
Screen Explanation Viewing Display/Icon Status icon Battery level (estimate) ··········· A Bluetooth device is connected. Basic Operation ··········· A microSD card is inserted. Full Low When is shown, charge the battery. Depending on the usage state, the battery level indication might significantly vary. Radio waves reception level (estimate) Strong Weak ············ You are out of the FOMA service area or radio waves do not reach. ·········· Vibrator is set.
Notification icon ······ New i-mode mail or SMS ······ Missed call ······ Record message Proceed to respective functions from icons, etc. You can proceed to respective functions by selecting “Status icon”, “Notification icon”, “Stand-by shortcut”, or date and time. 1. Oo▶Use Mo to highlight an icon, etc.▶Oo( ) ······ Videophone record message ····· 1Seg has automatically terminated (ECO NAVI).
Sub-display Basic Operation Various information is displayed on the sub-display such as the following: Information is displayed in cases such as when you press x with the FOMA terminal closed. 26 Clock Dialing Receiving a call When a missed call is found ” appears in cases such as when the “ FOMA terminal is closed. Press x to display the missed call record. When a new mail message is received ” appears in cases such as when the “ FOMA terminal is closed.
Navigation Displays and Key Operations Operating Command Navigation Key Key operations you can perform while you are operating a function are shown at the bottom of the display. (Navigation displays) ■Key assignments and basic navigation displays Zo Moves the cursor or highlighted display up. (Hold down to scroll continuously.) Scrolls the page up. Vo Moves the cursor to the right. Scrolls forward page by page. (Hold down to scroll continuously.) Fixes the operation.
Simple Menu Menu Operation Main Menu Basic Operation Press m from the Stand-by display to show Main Menu. In this manual, the descriptions of operating procedures are given mainly starting with the Stand-by display. Menu icons Simple Menu is a menu focusing on only basic functions for easy operation. By setting “シンプルメニュー (Simple menu)” using the Kisekae tool, you can show the Simple Menu by pressing m from the Stand-by display. You can compose i-mode mail and SMS messages in “Mail”.
Functions Starting with Simple Operation Depending on the function, you can start it either by selecting a menu item or by key operation from the Stand-by display. The following are the functions you can start by pressing keys for at least one second. Key Performance Sets/Releases Keypad Lock. Zo Shows the Registration display for Phonebook entries. Xo Starts i-widget. c Starts 1Seg. l Key x Performance Activates/Deactivates Manner Mode.
Using MyFACE docomo Palette UI Basic Operation The docomo Palette UI is a user interface that allows you to easily access a variety of functions and services from the center of the Stand-by display. You can freely customize this interface. The MyFACE display appears to the left and right of the Stand-by display, and the Shortcut display appears below. 1 No▶Operate MyFACE content.
Using Shortcut A list of shortcuts appears at the bottom of the Stand-by display. By creating shortcuts to, for example, functions you use frequently, you can use certain functions immediately. 1 1 Press Xo. 2 3 m▶便利ツール (Tool) ▶使いかたガイド (Guide) Use Mo to highlight a shortcut and press Oo( Enter a keyword or select a way of searching. Basic Operation 2 Press Xo. Use No to highlight a Stand-by shortcut and press Oo( ). You can start the shortcut.
Character Entry You can enter characters on the Registration display for Phonebook entries or the Composition display for mail messages, etc. 1 Select a input mode. Basic Operation Press l( 32 2 ) to select one of the input modes. Enter characters. By repeatedly pressing a numeric key, you can enter other characters assigned to the key.
Sound/Screen Setting Changing Ring Tone Changing the ring tone for incoming voice calls 1 m▶Setting▶Sound/Vib./Manner ▶Select ring tone▶Phone※▶Select ring ※To set a ring tone for mail messages, videophone calls, and so on, select the corresponding item. Adjusting Ring Volume Adjusting the ring volume for incoming voice calls 1 m▶Setting▶Sound/Vib./Manner ▶Ring volume▶Phone※▶Use Bo to adjust the volume.
Setting Keypad Sound OFF 1 m▶Setting▶Sound/Vib./Manner ▶Other sound setting▶Keypad sound Basic Operation ▶OFF Changing Display Settings Changing Stand-by display 1 m▶Setting▶Screen/Display ▶Stand-by display▶Stand-by display ▶Select a type of image▶Select a folder ▶Select an image. You may be able to select a display format depending on the image. Changing Display Brightness You can adjust the brightness of the display.
Making Display Hard to See from People Around Using Kisekae Tool You can set “View blind” to make it harder for the people around you to see the display from oblique angles. You can set “View blind” of “Btn fnc. ON/OFF set.” to “Valid” in advance. (See page 36) 1 You can set the ring tone, Stand-by display, menu icons and others at a time. 1 Press and hold 8 for at least one second. “ ▶Highlight a Kisekae Tool file and press ” appears on the Stand-by display.
Switching to the eco Mode eco Mode Autostart With a single key press, you can set the eco Mode that reduces This setting ensures that the mode will be automatically set to the eco Mode when the remaining battery level has battery consumption. Changing to eco Mode affects items dropped to the set level or less. specified in “eco mode setting”, e.g. dimming the display. “Battery level” of “eco mode autostart” is set to “40%” in Press and hold 5 for at least one second. default.
Lock/Security Various Security Codes “0000” at purchase This is a four-to-eight digit number for deleting all files or changing settings. When the display for entering the Terminal Security Code appears, enter your four-to-eight ). digit code and press Oo( To change 1.
Basic Operation PIN1 Code/PIN2 Code “0000” at the time of your contract PIN Unblocking Key (PUK) For the docomo mini UIM card, you can set two security codes, namely the PIN1 code and PIN2 code. The PIN1 code is a four-to-eight digit number for checking the user each time the docomo mini UIM card is inserted into the FOMA terminal or each time the FOMA terminal is turned on, to prevent the unauthorized use the docomo mini UIM card by a third party.
Various Lock Functions A variety of lock functions is installed on your FOMA terminal such as preventing illegal use of a third party, or protecting your private information. Dial Lock You can lock the IC card function. You cannot use the Osaifu-Keitai, ToruCa download, iC Communication, etc. 1. Press and hold 3 for at least one second. To release, perform the same operation and enter your Terminal Security Code.
Setting Incoming Call Restriction Setting Mimamori-Mail You can register a user name to be displayed in the You can set whether to receive (accept) or not to receive Mimamori-Mail, and set the destination and time to send (reject) incoming calls depending on the reason, such as from the parties which has not been registered in Phonebook Mimamori-Mail. or incoming calls from any parties who do not notify you of m▶Setting▶Lock/Security their phone numbers.
Checking Mimamori-Mail Record Mimamori-Mail records for the past seven days are displayed. You can check whether mail messages had been sent correctly to each destination. 1 OK NG Failed : Mail successfully sent : Mail failed to be sent, due to communication error etc. : Mail failed to be sent for out-of-service-area or a function running When Receiving a Mimamori-Mail You can reset each function setting to the default.
Call Telephone 2 When an entry contains multiple phone numbers, press No to select a desired phone number. ) to make a videophone call. Press c( Making a Call/Videophone Call Making a Call by Entering the Phone Number Connect 1 Enter a phone number starting with a city code▶Press d to make a call ▶Press h to end the call. Press c( ) to make a videophone call. You can put a call on hold by pressing r or ) during a call. You can release held call by i( pressing r.
Making an International Call You can use WORLD CALL to make an international call from Japan. 1 Receiving a Call/Videophone Call 1 0 (for at least one second) ▶Enter numbers in order of country code When a videophone call comes in You can receive the videophone call the same way as with a voice call. The substitute image is sent to the other party. →area code (city code) →destination phone number. 2 d▶Dial Press c( ) to make a videophone call.
Using Public Mode (Drive Mode) Once you activate Public mode (Drive mode), the guidance is played back telling that you cannot answer the call as you are currently driving or in a public place (such as a train, bus or movie theater) where you should refrain from speaking on the phone. Then, the call is disconnected automatically. 1 Press and hold a for at least one second. Connect “ ” appears on the Stand-by display. To deactivate Perform the same operation.
Using Voice Mail Service Using Call Forwarding Service 1 1 m▶TEL function▶Voice mail service To activate the service 1. Activate▶YES You can also specify a ring time. To play back the message 1. Play messages▶Play (voice call) or Play (videophone) ▶YES▶Operate following the voice guidance. 1 m▶TEL function▶Other network serv. ▶Call waiting To activate the service 1. Activate▶YES To activate the service 1.
Emergency Call Connect Emergency Calls Calls to police Calls to fire station and ambulance Calls for accidents at sea 46 Phone number 110 119 118 This FOMA terminal supports “Emergency Location Report”. When you make an emergency call such as at 110/119/118, information about the place where you are dialing from (location information) is automatically notified to emergency-response agencies such as police stations.
Making a Call to Outside the Country You Stay in Available Service Overseas Major Communication Service Voice call※1 Videophone call※1 SMS i-mode※2 i-mode mail i-channel※2※3 i-concier※4 i-Widget※5 Packet communication by connecting with a personal computer 3G ○ ○ ○ ○ ○ ○ ○ ○ 3G 850 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 0 (for at least one second) ▶Enter numbers in order of country code →area code (city code)→destination phone number. You can enter “+” by pressing and holding 0 for at least one second.
Sending Deco-mail Mail Connect Sending i-mode Mail Once you subscribe to i-mode, you can exchange e-mail messages with anyone who has the e-mail address of internet, even if it is a another company’s mobile phone/ smartphone or personal computer as well as DOCOMO each other. You can attach within 2 MB of up to 10 files (photos, moving pictures, etc.) with body text added. In addition, this FOMA terminal supports Deco-mail.
Sending Decome-Anime You can create impressive messages by inserting text or images into a Flash file. 1 l▶Create new Deco-Anime ▶Enter an address and subject. 2 Forwarding i-mode Mail 1. m( ) while an i-mode mail is displayed ▶Reply/Forward▶Forward▶Enter each item ) ▶c( Checking New i-mode Mail You can check the i-mode Center for a new mail message or Displaying Received i-mode Mail 1 l▶Inbox▶Select a folder ▶Select an i-mode mail message.
Early Warning “Area Mail” Connect Receiving Area Mail Area Mail is a service that can receive the earthquake Early Warnings and Tsunami Warnings that are issued from the Japan Meteorological Agency and Disaster/Evacuation information that are issued from the national and local governments without being affected by line congestion. ” lights and the When an Area Mail message arrives, “ buzzer or ring tone for Area Mail sounds. The received contents of some messages are automatically displayed.
Phonebook Storing Phonebook Entries Storing New Phone Numbers/Mail Addresses, etc. Storing Phonebook Entries from Dial/ Received List 1 m( You can store Phonebook entries in the FOMA terminal (Phone) or on the docomo mini UIM card. 1 Zo (for at least one second)▶Phone The display for entering a name appears. Enter a name and proceed. 2 Enter a reading. Enter a phone number. Enter a mail address. 3 Press c( ) Editing Phonebook Entries 1 Enter each item. Enter a name.
i-mode/Full Browser Displaying i-mode Sites i-mode is a service that enables you, by using the display of the mobile phone supporting i-mode, to use online services such as site access, Internet access, and i-mode mail. i-mode is a pay service that is available on a subscription basis. For details on i-mode, refer to DOCOMO website. You can display SSL/TLS※-compatible pages via FOMA terminal.
Displaying Websites Designed for PC You can browse Internet websites designed for PCs using the Full Browser function. Note that you are charged a high communication fee for the massive data communication such as browsing Internet websites having many images or downloading data. For details on the packet communication fee, refer to DOCOMO website. You can browse Internet websites composed of frames. You can select a frame to display it as well.
Storing Frequently Accessed Sites Bookmark websites or i-mode sites you frequently visit to get them displayed easily. i-channel This service distributes information such as news and weather forecast to i-channel mobile phones. The automatically received latest information flows on the Stand-by display by m( ) while the site is displayed tickers. You can read it on the i-channel list by pressing *r.
Camera Shooting Still Images/Moving Pictures Viewing and Operation of Finder Display Shooting Still Images For Digicam mode ❶Setting status You can check the settings. ❶ ❷Key operation guidance ❷ ❸Focus frame When a subject is focused on, the frame becomes green. ❸ ❹Zoom bar The zooming status is displayed.
Shooting Still Images Using Auto Timer Viewing Still Images/Moving Pictures after Shooting You can display the still image or the moving picture you have shot in Picture Album. You can detect a person’s face on the still image you have shot and expand it. You can also play expressive slide shows with the effect function. 1 m▶Data box▶My picture or imotion/ Movie▶Picture album Picture Album is also activated by pressing l( from the Finder display. 2 ) ).
※In order to solve the reception failures that Digital Terrestrial Television Broadcasting can not be viewed properly due to the influence of other radio waves, some Using 1Seg areas might be changed transmission channel. For this reason, you might need to reset the channels by using an ■Using 1Seg automatic scan (see page 58). After resetting the channels, 1Seg is a service provided by television entrepreneurs be sure to register the channels to the channel list. For (broadcasting stations).
Setting Channels Viewing and Operating Viewer Display When you activate 1Seg for the first time or change the area you are in, you need to operate “Channel setting”. Select “Auto channel setting” to enable you to search automatically for broadcast stations you can watch. You need to set this function when you are in a terrestrial ❶ digital TV broadcasting service area. 1 m▶CAMERA/TV/MUSIC▶1Seg ▶Channel setting▶Auto channel setting ❹ ❺ ❻ ❼ ❷ ▶YES▶YES▶Enter a title.
The operation on the viewer display Channel switch: No Sound volume adjustment: Bo Mute/Unmute: r Switch TV/data BC: l Video recording: Oo( ) (for at least one second) or x (for at least one second) The recorded video is saved on the microSD card. Setting Timer Watching or Recording 1Seg Set the date and time, a channel, and program name, and enter them to the TV Timer List or Timer Recording List. When the set time arrives, you can start watching or recording.
You cannot save WMA files to the FOMA terminal. A license protected WMA file cannot be saved to the FOMA terminal or the microSD card. For how to operate Windows Media Player 11/12, refer to Help for Windows Media Player 11/12. When you finish saving, remove the FOMA USB Cable with Charge Function 02 from the FOMA terminal. When you remove the FOMA USB Cable with Charge Function 02, remove it after finishing the software in use.
i-appli/i-Widget i-appli is a software program for mobile phone supporting i-mode. By downloading various software programs from the i-mode site, you can automatically update the stock price information or weather information, and enjoy games. i-Widget is a useful function for gaining easy access to frequently used contents and tools (Widget Appli programs) such as the calculator, clock, memo pad and stock market information. Widget Appli programs can be added by downloading them from the web site.
Downloading i-motion i-motion i-motion is a file consisting from video, audio, and music which you can download to your FOMA terminal from i-motion sites that support i-motion. You can also set it for a ring tone. When downloading or streaming an i-motion file, you might receive a bulky file. When data size required for sending or receiving is bulky, packet communications fees will be a large sum. You are advised to use packet pack/packet flat-rate service.
Osaifu-Keitai Osaifu-Keitai/ToruCa 1 Place the f mark over a scanning device. The Call/Charging indicator lights when you bring your FOMA terminal close to the scanning device and communication becomes ready. More Convenient Osaifu-Keitai is a function that enables you to make payments, use coupons and so on or access the information of websites by placing the FOMA terminal over the scanning device in the stores or other locations. You can check the balance, payment, point of electronic money.
More Convenient i-concier 64 i-concier works to serve you with a pleasant life just like a clerk or concierge does. The service holds your data (area information about your neighborhood, Memo, Schedule, ToruCa, Phonebook, etc.) and sends you information, with good timing, about a variety of things according to the contents of your memo and your schedule event, your living area, your current location, or your preference or taste.
Using Start by Voice You can call up the function by voice. This function is available in Japanese mode only. The first time you use this function, select “利用する (Use)” ). on the usage information display, or press c( 1 When the function to be called up cannot be specified, you can look it up in “使いかたガイド (Guide)”. ■Note when using Shabette-Kensaku or Start by Voice Speak as clearly as possible, in natural conversation speed. Speak in quiet, noise-free locations.
More Convenient Using Bar Code Reader 66 You can use the camera to scan QR codes and others, and store them as files. From the scanned data, you can make calls, compose i-mode mail messages, access Internet websites, and so on. ■When scanning with Bar Code Reader Guide frame Scan the code as large as possible within the guide frame. Autofocus works when you scan the code about 10 cm or more away from it. When you scan the code in the out-of-focus state, the recognition rate lowers.
Using Pedometer As you walk with your FOMA terminal in hand or in your pocket, your pace is measured, and then depending on the measured results, your distance, calories consumed, and body fat burned are displayed. To measure your step count, set “m▶Tool▶Pedometer )▶Pedometer setting” to “ON”. ▶m( You can also check your step count in the sub-display. (See page 26) Your step count is not updated while the step count record screen is displayed.
Connecting with Bluetooth Devices 1 More Convenient 2 68 m▶Tool▶Bluetooth▶Device list Select a Bluetooth device ▶Select a service to be used. Data Management Using microSD Card If you do not have a microSD card, you need to purchase it. P-01H supports a commercial microSD card of up to 2 GB and microSDHC card of up to 32 GB (As of October 2015). For the latest operation, check information such as the memory capacity and manufacturers of microSD cards, access the following sites (in Japanese only).
Inserting/Removing microSD Card Icons on the Display The inserting slot of the microSD card is in the inside of the back cover. To insert it, remove the back cover, and then remove the battery pack. : A microSD card is inserted. 1 : Data is being read/written. (Do not remove the microSD card nor turn off the FOMA terminal.) : The microSD card is write-protected. : The microSD card cannot be used. (Insert the microSD card again. If “ ” is still displayed, execute “Check microSD” or “microSD format”.
Formatting microSD Card Copying Data to FOMA Terminal When you use the microSD card for the first time, you need to format (initialize) it. Be sure to use P-01H for formatting. The microSD card formatted using other devices such as personal computers may not work properly. Note that formatting deletes all content on the microSD card.
Backing up Data to microSD Card You can back up Phonebook entries, schedule events, mail messages, memos, bookmarks, and the settings on and information about your FOMA terminal collectively onto the microSD card. When restoring the backup data onto your FOMA terminal, they are collectively restored. Backing up data from the FOMA terminal onto the microSD card is collectively applied to all data, so emptied files in the FOMA terminal are also backed up on the microSD card.
Sending Data For infrared communications, set the receiving end terminal first, and then start sending data within 60 seconds. 1 Submenu of the data to be sent ▶Select “Send Ir data” or “iC transmission”▶YES Procedure for sending data might differ depending on the data.
Support Troubleshooting First of all, check to see if you need to update the software program and then update it if necessary. See page 77 for how to update software programs. When symptom persists even after you check the countermeasures for the problem you suffer, contact the “Repairs” counter listed on the back page of this manual or a repair counter specified by DOCOMO. The “Repairs” counter is available in Japanese only. Power source The FOMA terminal does not turn on.
Pressing keys is disabled. …Make sure Dial Lock is deactivated. (See page 39) …Make sure Keypad Lock is deactivated. (See page 39) …Make sure Side Key Guard is set to “OFF”. The docomo mini UIM card is not recognized. …Make sure you insert the docomo mini UIM card in the correct direction. (See page 21) The clock does not show the correct time. …The clock may not show the correct time when the power has been kept on for a prolonged period of time.
Warranty and After-sales Service After-sales Services ◎When there is a problem with the FOMA Warranty terminal Make sure that you have received a warranty Before asking repairs, check card provided at purchase. After checking “Troubleshooting” in this manual or in “使 the contents of the warranty card as well as いかたガイド (Guide)” mounted on the “Shop name and date of purchase”, keep FOMA terminal. (“使いかたガイド (Guide)” the warranty card in a safe place. If you is available in Japanese mode only.
Others 76 ■Spare parts availability period ■Repairs may not be carried out in the The minimum storage period of the following cases: ・When, as a result of inspection at our performance spare parts (parts required repair center, corrosion is found due to for maintaining performance) for the FOMA exposure to water, dew condensation, or terminal is basically four years after the sweat, or when damage or deformation is closure of its production.
Error Information Send Setting Updating Software When an error occurs on the FOMA terminal, the error This function is to check whether you need to update information is created automatically and send it to DOCOMO software programs in the FOMA terminal by connecting to if this function is set to “ON”. the network, and if necessary, you can download some parts of software programs using packet communication, and can m▶Setting▶Other setting update the software programs.
You are advised to update software programs when radio wave is strong enough with the three antennas displayed and while you are not moving. If radio wave conditions get worse while downloading software programs, or download is suspended, move to a place with better radio wave conditions and try again to update software programs. When updating software programs, the proprietary information about your FOMA terminal (model name or serial number, etc.
Scanning Function You can detect data or application programs, which might cause troubles, from among those downloaded to your FOMA terminal, and then can delete the data or stop starting the application programs. This scan function provides a certain protective measure to filter out data that might cause troubles with your FOMA terminal at the time when you browse websites or receive messages.
The highest SAR value for this mobile phone when tested for use at the ear is 0.911 W/kg※2 and when worn on the body is 0.542 W/kg※3. There may be slight differences between the SAR levels for each product, but they all satisfy the limit. The actual SAR of this mobile phone while SAR Certification operating can be well below that indicated Information above.
European RF Exposure Information Others *** Tests for SAR have been conducted using Declaration of Conformity standard operating positions with the phone transmitting at its highest certified power level in all tested frequency This mobile phone complies with the EU bands. This mobile phone meets the requirements for exposure to radio waves.
FCC Notice The SAR limit set by the FCC is 1.6 W/kg.* Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value.
Important Safety Information Aircraft Switch off your wireless device when boarding an aircraft or whenever you are instructed to do so by airline staff. If your device offers a ‘flight mode’ or similar feature consult airline staff as to whether it can be used on board. Driving Full attention should be given to driving at all times and local laws and regulations restricting the use of wireless devices while driving must be observed.
Export Administration Regulations Others “FOMA”, “i-mode”, “i-appli”, “i-motion”, “Deco-mail”, “WORLD CALL”, “WORLD WING”, and the logos of “i-mode”, “i-appli” are trademarks or registered trademarks of NTT DOCOMO, INC. This product and its accessories might be covered by the Japan Export Administration Regulations (“Foreign Exchange and Foreign Trade Law” and its related laws) and Export Administration Regulations.
Others Contains Adobe® Flash® Lite® and Adobe Reader® Mobile technology by Adobe Systems Incorporated. Adobe Flash Lite Copyright © 2003-2015 Adobe Systems Incorporated. All rights reserved. Adobe Reader Mobile Copyright © 1993-2015 Adobe Systems Incorporated. All rights reserved. Adobe, Adobe Reader, Flash, and Flash Lite are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
Others 86 The abbreviations of operating systems (Japanese versions) below are used in this manual. Windows 10 stands for Microsoft® Windows® 10 Home, Microsoft® Windows® 10 Pro, Microsoft® Windows® 10 Enterprise. Windows 8.1 stands for Microsoft® Windows® 8.1, Microsoft® Windows® 8.1 Pro, Microsoft® Windows® 8.1 Enterprise. Windows 8 stands for Microsoft® Windows® 8, Microsoft® Windows® 8 Pro, Microsoft® Windows® 8 Enterprise.
Unlocking SIM This FOMA terminal supports SIM unlock. When the SIM is unlocked, other operator company’s SIM cards can be used with your FOMA terminal. Restrictions may be applied to some of the services or the functions. Note that NTT DOCOMO, INC. cannot provide any guarantees for operating the FOMA terminal when using other company’s card. For further details on the SIM unlock procedures, refer to the DOCOMO website.
Index Channel setting....................................58 A Character entry ....................................32 AC adapter ...........................................22 Line feed ...........................................32 After-sales service ...............................75 Pictograms........................................32 Alarm ....................................................65 Smiley ...............................................32 Antenna .................................................
Main menu ...........................................28 Making a call........................................42 Making a videophone call ...................42 Manner mode.......................................33 Menu icon ............................................28 Microphone ............................................3 microSD card .......................................68 Back up/restore ................................71 Check ................................................69 Copy ..................
Others Receiving a call ...................................43 Receiving a videophone call ...............43 Record message .................................43 Reset settings ......................................41 Ring volume .........................................33 90 Start by voice.......................................65 Numerics Status icon ...........................................24 1Seg .....................................................57 Strap hole ........................................
Using mobile phone with your manners! When using your mobile phone in a public place, don’t forget to show common courtesy and consideration for others around you. In the following cases, be certain to turn off the power. ■Where use is prohibited When using this mobile phone on an airplane or at a hospital, follow the instructions of the airline or medical institution. In areas where mobile phone usage is prohibited, turn off the power. In the following cases, be certain to set Public mode.
