P-01F INSTRUCTION MANUAL ’13.
Thank you for selecting the “P-01F”. Read this manual before use to correctly operate your P-01F. About manual of P-01F Basic Package The operating procedures for the P-01F are also published as in “使いかたガイド (Guide)” on-screen manual installed onto your FOMA terminal, and “Instruction Manual (Detailed Version)” as a PDF.
For Loss, Theft, Malfunction, and Inquiries while Overseas (24-hour Reception) ■ From DOCOMO mobile phones International call access code for the country you stay -81-3-6832-6600* (toll free) * You are charged a call fee to Japan when calling from a land-line phone, etc. ※ If you use P-01F, you should dial the number +81-3-6832-6600 (to enter ‘+’, press and hold the ‘0’ key for at least one second).
General Inquiries Repairs 0120-005-250 ■ From DOCOMO mobile phones ■ From land-line phones (toll free) * Service available in English, Portuguese, Chinese, Spanish. * Unavailable from part of IP phones. (Business hours: 9:00 a.m. to 8:00 p.m.) (In Japanese only) ■ From DOCOMO mobile phones ■ From land-line phones * Unavailable from land-line phones, etc.
Contents FOMA Terminal ······························ 2 Part Names and Functions ············ 3 Precautions···································· 5 Handling Precautions ·················· 12 Waterproof/Dust-proof Performance ··· 16 Introduction Before Using ················································· 20 Screen Explanation ······································ 23 Character Entry ············································ 30 Sound/Screen Setting ·································· 31 Lock/Security·
Introduction FOMA Terminal 2 This FOMA terminal supports W-CDMA system. Because the FOMA terminal uses radio waves, you cannot use it in places where the radio waves do not reach, where they are weak even outdoors, such as inside tunnels, basements, or buildings, or out-of-service area. You might not be able to operate the FOMA terminal even when you are in a place with a fine view such as in a high-rise building or apartment.
Part Names and Functions ❿ ❷Earpiece For listening to the other party’s voice ❸ ❸Display ⓫Microphone For speaking to the other party ❹oCommand navigation key For operating functions and menus ⓬cCamera key/1Seg key ❺mMenu key For showing the Main Menu ❹ ❺ ❻ ❼ ❽ ⓫ ⓬ ⓭ ⓮ ⓯ ❿Light sensor For sensing brightness (Do not cover it with your hands or do not put a sticker on it. Doing so might disable detecting the brightness.
Introduction ⓰Call/Charging indicator Lights while you are receiving a call or message, or charging. ⓰ ⓱Sub-display ⓱ ⓲FOMA antenna※ ⓳Camera For shooting portraits and/or landscapes ⓴Speaker Back cover Remove this when attaching/removing the battery pack, docomo mini UIM card, and microSD card. ⓴ For using earphone Connect an optional connector-terminalcompatible earphone. When using a connector-terminal-non-compatible earphone, use an optional plug adapter for connection.
Precautions ALWAYS FOLLOW THESE DIRECTIONS Danger This symbol indicates that incorrect handling will almost certainly cause death or serious injury. Warning This symbol indicates that incorrect handling poses a risk of causing death or serious injury. Caution This symbol indicates that incorrect handling poses a risk of causing a slight injury or damage to the product or property. ■ The following symbols show specific directions: Denotes actions prohibited to do.
General precautions for FOMA terminal, batteries, adapters, desktop holder, and docomo mini UIM card Introduction Do Danger Don’t Don’t Do not use, store, or leave the FOMA terminal or its accessories in places with a high temperature (such as near fire, near heating appliances, inside a kotatsu or near other furniture with heating elements, in places exposed to direct sunlight, or in cars heated by the sun). Fire, burns, or injury may result.
Do Precautions for FOMA terminal Warning Don’t Do not directly point the infrared data port at someone’s eyes during transmission. Doing so may harm the person’s eyes. Don’t While using infrared communication, do not point the FOMA terminal’s infrared data port at a home electrical appliance which is equipped with an infrared device. The infrared device may malfunction, and possibly cause an accident.
Introduction Do Do 8 Turn off the FOMA terminal when near electronic devices using high-precision control or weak signals. The FOMA terminal may cause the electronic devices to malfunction and have other adverse effects. ※ Electronic devices that may be affected: Hearing aids, implanted cardiac pacemakers, implanted defibrillators, other electronic medical equipment, fire alarms, automatic doors and other automatically controlled devices.
Precautions for batteries ■ Check the description on the label of the battery pack for the type of battery. Type Lithium-ion battery Danger Don’t Don’t Don’t Don’t Do Do not let any metal object such as a wire come in contact with the battery terminals. Also do not carry or store the battery together with any metal objects like a necklace. Otherwise, the battery pack may ignite, burst or overheat and its electrolyte may leak.
Precautions for adapters and desktop holder Introduction Warning Don’t Don’t Don’t Don’t Don’t 10 Do not use the adapter if its cord has been damaged. Fire, burns or electric shock may result. Do not use the AC adapter and desktop holder in humid places such as a bathroom. Fire, burns or electric shock may result. The DC adapter is for use only in a negative (-) grounded vehicle. Do not use it in a positive (+) grounded vehicle. Fire, burns or electric shock may result.
Before cleaning, pull the power plug out of the outlet or cigarette lighter socket. Pull the Fire, burns or electric shock may power plug result. Notes on using near electronic medical equipment Warning Do out Precautions for docomo mini UIM card Caution Do Be careful not to touch the cut surface of the docomo mini UIM card when removing it. Otherwise, injury may result.
List of materials used Introduction ■P-01F Handset/Back Cover P61/Battery Pack P23 Where it is used Outer Display casing surface, Battery surface, Battery surface (Hinge side) Material/Finishing PC/UV coating Connector terminal Stainless steel/ nickel plating, tin plating PC/UV coating Polyester series elastomer Silicon rubber Connector Body terminal Fitting pin cover area Packing PMMA/hard coating Side key Around the side key ABS ABS/UV coating Charging terminal Brass/nickel plating, nickel pall
■Carefully read each instruction manual attached to optional items. ■Do not leave the camera in places exposed to direct sunlight. Pixels may be discolored or burns may Notes on handling the FOMA terminal result. ■Avoid using in extremely high or low ■When using the FOMA terminal, temperatures. ensure that you shut the cover for the The FOMA terminal should be used within connector terminal. a temperature range of 5°C to 35°C and a Dust or water might enter into the FOMA humidity range of 45% to 85%.
Introduction 14 ■Charge the battery in a place with an appropriate ambient temperature of 5°C to 35°C. ■The usable time of the battery differs depending on the usage environment or its remaining life. ■Depending on how the battery pack is used, it might swell as its operating life becomes short, but this is not a problem.
■Radio frequencies The radio frequencies for the Bluetooth function of the FOMA terminal are as follows: 2.4 FH 1 Caution ■Do not use the modified FOMA terminal. Using a modified FOMA terminal infringes the Radio Law/ Telecommunications Business Law.
Introduction Waterproof/Dust-proof Performance 16 Your P-01F is capable of IPX5※1 and IPX7※2 waterproof performance and IP5X※3 dust-proof performance if the connector terminal cover and back cover are firmly closed and no clearance gap and float found in them. ※1 IPX5 means that the P-01F maintains its performance as a phone even after a water jet flow has been sprayed over the FOMA terminal from all directions under conditions where water in a volume of 12.
Removing/Attaching the Back Cover ■Opening the connector terminal cover ① Hook your fingertip over the groove, pull out the cover to direction A, and rotate it as direction B. ■Removing the back cover ① Hook your fingertip over the concave part of the FOMA terminal, lift up in the direction of the arrow to remove the back cover.
Introduction 18 ・ Even the slightest sands entered from the Caution connector terminal cover or back cover ■About FOMA terminal could cause water or dust to enter the Do not wash the FOMA terminal with a inside of the FOMA terminal. washing machine or ultrasonic cleaner. ■About the connector terminal cover and Never charge the battery when it gets wet. back cover Do not leave the FOMA terminal with drops Do not open or close them with gloves put of water remained on. on hands.
② Securely take hold of the FOMA terminal, and firmly swing each surface at least 20 times until no moisture sprays off. When Charging Battery Accessories and optional items are not waterproofed/dust-proofed. Check the following before and after charging: Never charge the battery with the FOMA terminal left wet. If the FOMA terminal gets wet, drain and wipe off moisture with a clean dry cloth and then charge.
Before Using When you remove the docomo mini UIM card Pull out the tray, and then slide the docomo mini UIM card slowly to pull it out. After pulling out the tray until about half of the docomo mini UIM card is visible, pull out the docomo mini UIM card by sliding it out. Attaching docomo mini UIM card/ Battery Pack Basic Operation To insert the docomo mini UIM card/battery pack, remove the back cover and insert. (See page 17) 20 1 Insert the docomo mini UIM card. 1.
4 Charging Charging Using Desktop Holder Call/Charging indicator AC Adapter’s plug Engraved surface When charging is completed, hold the desktop holder and lift up the FOMA terminal to remove.
For detaching, pull out the connector horizontally while pressing the release buttons. Malfunction could result if you try to pull it forcibly. When charging starts, the Call/Charging indicator lights in red. When charging is completed, it turns off. Notifying Your Caller ID on the Other Party’s Phone 1 Basic Operation Turning Power ON 1 Press and hold h for at least one second. After the notes of waterproof and Wake-up display are displayed, the Stand-by display appears. To turn off the power 1.
Screen Explanation Viewing Display/Icon Status icon Battery level (estimate) ··········· A Bluetooth device is connected. ··········· A microSD card is inserted. Low When is shown, charge the battery. Depending on the usage state, the battery level indication might significantly vary. Radio waves reception level (estimate) Strong Weak ············ You are out of the FOMA service area or radio waves do not reach. ·········· Vibrator is set. ·········· Ring Volume is set to “Silent”.
Notification icon ······ New i-mode mail or SMS ······ Missed call ······ Record message Basic Operation ······ Videophone record message ····· The mode has automatically changed to eco Mode (ECO NAVI). ····· 1Seg has automatically terminated (ECO NAVI). Stand-by shortcut ····· i-concier ····· dmarket ····· 地図アプリ (Map Application) ····· Guide Proceed to respective functions from icons, etc.
Navigation Displays and Key Operations Operating Command Navigation Key Key operations you can perform while you are operating a function are shown at the bottom of the display. (Navigation displays) ■Key assignments and basic navigation displays Zo Moves the cursor or highlighted display up. (Hold down to scroll continuously.) Scrolls the page up. Vo Moves the cursor to the right. Scrolls forward page by page. (Hold down to scroll continuously.) Fixes the operation.
Simple Menu Menu Operation Main Menu Press m from the Stand-by display to show Main Menu. In this manual, the descriptions of operating procedures are given mainly starting with the Stand-by display. Basic Operation Menu icons Submenu When “ ” is displayed at the lower left of the display, you can use functions such as Store, Edit, and Delete by pressing m.
Functions Starting with Simple Operation Depending on the function, you can start it either by selecting a menu item or by key operation from the Stand-by display. The following are the functions you can start by pressing keys for at least one second. Multi One-touch Function You can easily call up frequently used functions and telephone numbers which have been registered in multi one-touch keys. Although functions have been registered in multi one-touch keys at purchase, you can change them.
Using MyFACE docomo Palette UI Basic Operation The docomo Palette UI is a user interface that allows you to easily access a variety of functions and services from the center of the Stand-by display. You can freely customize this interface. The MyFACE display appears to the left and right of the Stand-by display, and the Shortcut display appears below. 1 No▶Operate MyFACE content.
Using Shortcut A list of shortcuts appears at the bottom of the Stand-by display. By creating shortcuts to, for example, functions you use frequently, you can use certain functions immediately. 1 Press Xo. 2 1 Press Xo. 2 3 m▶便利ツール (Tool) ▶使いかたガイド (Guide) Use Mo to highlight a shortcut and press Oo( Basic Operation Use No to highlight a Stand-by shortcut and press Oo( ). You can start the shortcut.
Character Entry You can enter characters on the Registration display for Phonebook entries or the Composition display for mail messages, etc. 1 Select a input mode. Basic Operation Press l( 30 2 3 Convert/fix characters. 1. Press No to specify the area to be converted. 2. Press Bo to move the cursor onto the candidate list. 3. Press Mo to select a conversion candidate. 4. Press Oo to fix the character. ) to select one of the input modes. Enter characters.
Sound/Screen Setting Changing Ring Tone Changing the ring tone for incoming voice calls 1 ※To set a ring tone for mail messages, videophone calls, and so on, select the corresponding item. Adjusting Ring Volume Adjusting the ring volume for incoming voice calls 1 m▶Setting▶Sound/Vib./Manner ▶Ring volume▶Phone※▶Use Bo to adjust the volume. ※To adjust ring volume for mail messages, videophone calls, and so on, select the corresponding item.
Lighting off/Power Saver Mode Setting Keypad Sound OFF Basic Operation 1 m▶Setting▶Sound/Vib./Manner ▶Other sound setting▶Keypad sound ▶OFF Changing Display Settings Changing Stand-by display 1 m▶Setting▶Screen/Display ▶Stand-by display▶Stand-by display ▶Select a type of image▶Select a folder ▶Select an image. You may be able to select a display format depending on the image. Changing Display Brightness You can adjust the brightness of the display.
Making Display Hard to See from People Around You can set “View blind” to make it harder for the people around you to see the display from oblique angles. 1 Press and hold 8 for at least one second. “ Using Kisekae Tool You can set the ring tone, Stand-by display, menu icons and others at a time. 1 ” appears on the Stand-by display. Some menu configurations change according to the usage frequency depending on the type of the menu.
Switching to the eco Mode With a single key press, you can set the eco Mode that reduces battery consumption. Changing to eco Mode affects items specified in “eco mode setting”, e.g. dimming the display. 1 Press and hold 5 for at least one second. Basic Operation “ ” appears. To release Perform the same operation. eco Mode Setting You can set the items for reducing battery consumption for when the eco Mode activates.
Terminal Security Code “0000” at purchase This is a four-to-eight digit number for deleting all files or changing settings. When the display for entering the Terminal Security Code appears, enter your four-to-eight ). digit code and press Oo( To change 1. m▶Setting▶Lock/Security▶Change security code This is a four-digit number required for your identification when you place an order at a docomo Shop, docomo Information Center, or “お客様サポート (User support)” site, or when you use respective network services.
PIN Unblocking Key (PUK) Basic Operation The PIN unblocking key (PUK) is the eight-digit number for releasing the blocked PIN1 code and PIN2 code. You cannot change this code by yourself. If you enter a wrong PIN unblocking key (PUK) 10 times in succession, the docomo mini UIM card is locked. In that case contact one of docomo Shops.
Original Lock Resetting to Default Resetting the Function Settings to Default You can reset the items on “Function List”, which are . (See page 74) indicated by The items indicated by might include the functions which do not return to their default settings or state.
Call Telephone 2 When an entry contains multiple phone numbers, press No to select a desired phone number. ) to make a videophone call. Press c( Making a Call/Videophone Call Making a Call by Entering the Phone Number 1 Enter a phone number starting with a city code▶Press d to make a call ▶Press h to end the call. Connect Press c( ) to make a videophone call. You can put a call on hold by pressing r during a call. You can release held call by pressing r.
Making an International Call You can use WORLD CALL to make an international call from Japan. Contact “docomo Information Center” on the back page of this manual for inquiries about details on WORLD CALL. When using international carriers other than DOCOMO, contact them. 1 You can enter “+” by pressing and holding 0 for at least one second. When the area code (city code) begins with “0”, enter the area code without “0” at the beginning.
Using Public Mode (Drive Mode) Once you activate Public mode (Drive mode), the guidance is played back telling that you cannot answer the call as you are currently driving or in a public place (such as a train, bus or movie theater) where you should refrain from speaking on the phone. Then, the call is disconnected automatically. 1 Press and hold a for at least one second. “ ” appears on the Stand-by display. Connect To deactivate Perform the same operation.
Using Voice Mail Service Using Call Forwarding Service 1 1 m▶TEL function▶Voice mail service To activate the service 1. Activate▶YES You can also specify a ring time. To play back the message 1. Play messages▶Play (voice call) or Play (videophone) ▶YES▶Operate following the voice guidance. m▶TEL function▶Other network serv. ▶Call forwarding To activate the service 1. Activate▶Activate▶YES You can set the phone number of forwarding destination or ring time as well.
Emergency Call Connect Emergency Calls Calls to police Calls to fire station and ambulance Calls for accidents at sea 42 Using Overseas Phone number 110 119 118 This FOMA terminal supports “Emergency Location Report”. When you make an emergency call such as at 110/119/118, information about the place where you are dialing from (location information) is automatically notified to emergency-response agencies such as police stations.
Making a Call to Outside the Country You Stay in Available Service Overseas Major Communication Service Voice call※1 Videophone call※1 SMS※2 i-mode※3 i-mode mail i-channel※3※4 i-concier※5 i-Widget※6 Packet communication by connecting with a personal computer 3G ○ ○ ○ ○ ○ ○ ○ ○ 1 2 Press d to make a call. Press c( Connect You can enter “+” by pressing and holding 0 for at least one second. Enter “81” as a country code when you make an international call to Japan.
Sending Deco-mail Mail Sending i-mode Mail Once you subscribe to i-mode, you can exchange e-mail messages over the Internet. You can attach within 2 Mbyte of up to 10 files (photos, moving pictures, etc.) with body text added. For details on i-mode mail, refer to DOCOMO website. 1 l▶l( )▶Enter each item. You can change the color or size of characters or background color, or insert images or Deco-mail pictograms. 1 2 Connect Enter a subject. Select a file such as an image. 44 ).
Sending Decome-Anime You can create impressive messages by inserting text or images into a Flash file. 1 l▶Create new Deco-Anime ▶Enter an address and subject. 2 Forwarding i-mode Mail 1. m( ) while an i-mode mail is displayed ▶Reply/Forward▶Forward▶Enter each item ) ▶c( Checking New i-mode Mail You can check the i-mode Center for a new mail message or Displaying Received i-mode Mail 1 l▶Inbox▶Select a folder ▶Select an i-mode mail message.
Early Warning “Area Mail” Connect Receiving Area Mail You can receive information such as about earthquake alerts that are issued from the Japan Meteorological Agency as an Area Mail message. When an Area Mail message arrives, “ ” lights and the buzzer or ring tone for Area Mail sounds. The received contents of some messages are automatically displayed. To erase the displayed content, select “OK”. You can receive Area Mail messages even when you are not contracted to use i-mode.
Phonebook Storing Phonebook Entries Storing New Phone Numbers/Mail Addresses, etc. Storing Phonebook Entries from Dial/ Received List 1 m( You can store Phonebook entries in the FOMA terminal (Phone) or on the docomo mini UIM card. 1 Zo (for at least one second)▶Phone The display for entering a name appears. Enter a name and proceed. 1 Enter a phone number. Enter a mail address.
i-mode/Full Browser Displaying i-mode Sites i-mode is a service that enables you, by using the display of the mobile phone supporting i-mode, to use online services such as site access, Internet access, and i-mode mail. i-mode is a pay service that is available on a subscription basis. For details on i-mode, refer to DOCOMO website. You can display SSL/TLS※-compatible pages via FOMA terminal.
Displaying Websites Designed for PC You can browse Internet websites designed for PCs using the Full Browser function. Note that you are charged a high communication fee for the massive data communication such as browsing Internet websites having many images or downloading data. For details on the packet communication fee, refer to DOCOMO website. You can browse Internet websites composed of frames. You can select a frame to display it as well.
Storing Frequently Accessed Sites i-channel Bookmark websites or i-mode sites you frequently visit to get them displayed easily. This service distributes information such as news and weather forecast to i-channel mobile phones. The automatically received latest information flows on the Stand-by display by m( ) while the site is displayed tickers. You can read it on the i-channel list by pressing *r.
Shooting Still Images/Moving Pictures Camera Viewing and Operation of Finder Display Shooting Still Images For Digicam mode ❶MENU 1 m▶CAMERA/TV/MUSIC▶Camera ▶Digicam mode 2 Oo( You can check the settings. ❶ ❷Key operation guidance ❷ ❸Focus frame )▶Oo( ) When a subject is focused on, the frame becomes green. ❸ ❹Zoom bar The zooming status is displayed.
Shooting Still Images Using Auto Timer Viewing Still Images/Moving Pictures after Shooting You can display the still image or the moving picture you have shot in Picture Album. You can detect a person’s face on the still image you have shot and expand it. You can also play expressive slide shows with the effect function. 1 m▶Data box▶My picture or imotion/ Movie▶Picture album Picture Album is also activated by pressing l( from the Finder display. 2 ) ).
※Channels might be reorganized along with the discontinuation of analog broadcasting. For this reason, you might need to reset the channels by using an Using 1Seg automatic scan (see page 54). After resetting the channels, be sure to register the channels to the channel list. For ■Using 1Seg details about channel changes accompanying terrestrial 1Seg is a service provided by television entrepreneurs digital broadcasting, check resources such as the (broadcasting stations).
Setting Channels Viewing and Operating Viewer Display When you activate 1Seg for the first time or change the area you are in, you need to operate “Channel setting”. Select “Auto channel setting” to enable you to search automatically for broadcast stations you can watch. You need to set this function when you are in a terrestrial ❶ digital TV broadcasting service area. 1 m▶CAMERA/TV/MUSIC▶1Seg ▶Channel setting▶Auto channel setting ▶YES▶YES▶Enter a title.
The operation on the viewer display Channel switch: No Sound volume adjustment: Bo Music Mute/Unmute: r Switch TV/data BC: l Video recording: Oo( Saving WMA File ) (for at least one second) or x (for at least one second) The recorded video is saved on the microSD card. Setting Timer Watching or Recording 1Seg Set the date and time, a channel, and program name, and enter them to the TV Timer List or Timer Recording List. When the set time arrives, you can start watching or recording.
You cannot save WMA files to the FOMA terminal. A license protected WMA file cannot be saved to the FOMA terminal or the microSD card. For how to operate Windows Media Player 10/11/12, refer to Help for Windows Media Player 10/11/12. When you finish saving, remove the FOMA USB Cable with Charge Function 02 from the FOMA terminal. When you remove the FOMA USB Cable with Charge Function 02, remove it after finishing the software in use.
i-αppli/i-Widget i-αppli is a software program for mobile phone supporting i-mode. By downloading various software programs from the i-mode site, you can use your FOMA terminal more conveniently. You can automatically update the stock price information or weather information, and enjoy games without accessing network. i-Widget is a useful function for gaining easy access to frequently used contents and tools (Widget Appli programs) such as the calculator, clock, memo pad and stock market information.
Downloading i-motion i-motion i-motion is a file consisting from video, audio, and music which you can download to your FOMA terminal from i-motion sites that support i-motion. You can also set it for a ring tone. When downloading or streaming an i-motion file, you might receive a bulky file. When data size required for sending or receiving is bulky, packet communications fees will be a large sum. You are advised to use i-mode packet flat-rate service.
i-concier 1 When information arrives, blinks and the content is displayed on the Stand-by display▶Select a message ▶Select a piece of information. Displaying i-concier 1 m▶i-concier▶インフォメーション一覧 (Information list)▶Select a piece of information. Convenient Tools Using Shabette-Kensaku You can execute i-mode search by voice. The first time you use this function, select “Use” on the usage information display. You are charged separately a packet communication fee.
Using Start by Voice You can call up the function by voice. This function is available in Japanese mode only. The first time you use this function, select “利用する (Use)” ). on the usage information display, or press c( More Convenient 1 60 d (for at least one second) ▶When “それではどうぞ ★★音声受付中 ★★ (Please ★★Voice is being accepted.★★)” is displayed, pronounce the function into the microphone within 10 seconds. When the function to be called up cannot be specified, you can look it up in “使いかたガイド (Guide)”.
Using Bar Code Reader ■QR code QR code is one of the two-dimensional codes that denotes data in the vertical and horizontal directions. “株式会社NTTドコモ (NTT DOCOMO, INC.)” is displayed when you scan the QR code with the FOMA terminal. Access P-SQUARE by using QR code on the right QR code for accessing the site 1 m▶Tool▶Bar code reader▶Scan code ▶Fit a code to the guide frame and press Xo to focus ) to scan the code. ▶Press Oo( A URL is displayed as a scanned result.
Bluetooth Function You can connect your FOMA terminal to a Bluetooth device, and can talk on the phone or play music files. 1 Registering a Bluetooth Device to FOMA Terminal 2 You can search and register a Bluetooth device to the FOMA terminal. You need to place the Bluetooth device to be registered standby for registration beforehand. Register Wireless Earphone Set 02 and connect using the Hands-free service More Convenient 1 2 3 m▶Tool▶Bluetooth ▶Register New Devices Select “OK”.
Data Management Using microSD Card The inserting slot of the microSD card is in the inside of the back cover. To insert it, remove the back cover, and then remove the battery pack. 1 With the metal terminal surface facing downward, make sure that the cut edge is positioned at right and then insert. Push it until it clicks. When you remove the microSD card Push the microSD card until it stops and remove it. Note that the microSD card may pop out when you insert or remove it.
Icons on the Display Formatting microSD Card : A microSD card is inserted. When you use the microSD card for the first time, you need to format (initialize) it. Be sure to use P-01F for formatting. The microSD card formatted using other devices such as personal computers may not work properly. Note that formatting deletes all content on the microSD card. : Data is being read/written. (Do not remove the microSD card nor turn off the FOMA terminal.) : The microSD card is write-protected.
Copying Data to FOMA Terminal Backing up Data to microSD Card Copying a still image You can back up Phonebook entries, schedule events, mail messages, memos, bookmarks, and the settings on and information about your FOMA terminal collectively onto the microSD card. When restoring the backup data onto your FOMA terminal, they are collectively restored.
More Convenient Sending/Receiving Data by Infrared Communication DOCOMO Connection Manager Sending Data Set the receiving end terminal first, and then start sending data within 60 seconds. 1 Submenu of the data to be sent ▶Send Ir data▶YES Procedure for sending data might differ depending on the data.
Support Troubleshooting First of all, check to see if you need to update the software program and then update it if necessary. See page 70 for how to update software programs. When symptom persists even after you check the countermeasures for the problem you suffer, contact the “Repairs” counter listed on the back page of this manual or a repair counter specified by DOCOMO. The “Repairs” counter is available in Japanese only. Power source The FOMA terminal does not turn on.
Pressing keys is disabled. …Make sure Dial Lock is deactivated. (See page 36) …Make sure Keypad Lock is deactivated. (See page 37) …Make sure Side Key Guard is set to “OFF”. The docomo mini UIM card is not recognized. …Make sure you insert the docomo mini UIM card in the correct direction. (See page 20) The clock does not show the correct time. …The clock may not show the correct time when the power has been kept on for a prolonged period of time.
Do not peel the nameplate off the FOMA terminal. Note that when we cannot ensure the contents described on the nameplate and therefore cannot verify the product conformity to the technical standard, it might happen that we at DOCOMO reject to repair the malfunction. The information such as about function settings, etc. might be reset depending on the troubles or repairs, or the way you handle the FOMA terminal. Set the settings again.
Error Information Send Setting Others 1 70 Updating Software When an error occurs on the FOMA terminal, the error This function is to check whether you need to update information is created automatically and send it to DOCOMO software programs in the FOMA terminal by connecting to if this function is set to “ON”. the network, and if necessary, you can download some parts of software programs using packet communication, and can m▶Setting▶Other setting update the software programs.
You are advised to update software programs when radio wave is strong enough with the three antennas displayed and while you are not moving. If radio wave conditions get worse while downloading software programs, or download is suspended, move to a place with better radio wave conditions and try again to update software programs. When updating software programs, the proprietary information about your FOMA terminal (model name or serial number, etc.
Scanning Function You can detect data or application programs, which might cause troubles, from among those downloaded to your FOMA terminal, and then can delete the data or stop starting the application programs. This scan function provides a certain protective measure to filter out data that might cause troubles with your FOMA terminal at the time when you browse websites or receive messages.
Options and Related Devices Combining various options with the FOMA terminal, you can realize more versatile use from personal purpose to business purposes. Some products may not be dealt in depending on the area. For details, consult a handling counter such as a docomo Shop. For details on options, refer to the user’s manuals of respective options and related devices.
SMS setting Mail setting Area Mail setting Auto Deco-mail setting 74 iMenu/Search Bookmark Screen Memo Browsing history Enter URL Enter URL URL enter history i-Channel list Compose new SMS Check mail/message Ticker display setting Reset i-Channel imode Browser Set.
Schedule Memo My picture Data Security Service Machi-chara Chara-den 1Seg Image Video Position memory Document viewer Font SD other files Search all history Calculator Alarm Scan code Saved data Update phonebooks Update schedule etc. Update images Update setting info Setting/History Refer microSD data Backup/Restore Guide Voice recorder Device list Bluetooth Register New Devices Bluetooth ON/Bluetooth OFF Search phonebook Add to phonebook Phonebook UIM operation Phonebook set.
Kisekae Tool setting Stand-by display MyFACE setting Auto reset Disaster Voice Messaging Msg.
Battery eco mode setting eco mode autostart Use history Battery level USB mode Bluetooth Map/Overseas Setting eco mode Inquiries(overseas) Sub clock setting Overseas setting External connection Headset microphone Femtocell MultiOneTouch set. Side key guard Camera-button setting i-concier Alarm setting Self mode MultiOneTouch Reset settings Initialize Software Update Int’l dial assistance imode service set.
Main Specifications ■Handset Model P-01F Dimensions (when closed) Height: Approx. 112 mm Width: Approx. 51 mm Depth: Approx. 15.1 mm Approx. 119 g Weight (with the battery pack attached) Continuous standby time (FOMA/3G) Continuous talk time (FOMA/3G) 1Seg watching time Charging time Display Type Size Others Number of pixels 78 Image pickup device Approx. 4,800 max. (default) Music Continuous playback playback time※2 SD-Audio file (supports Play Background): Approx.
■Battery pack Name of product Battery Pack P23 Battery type Voltage Capacity Li-ion (lithium ion) battery 3.7 V 800 mAh Maximum (total) recordable time to Approx. 320 minutes the microSD card (1 Gbyte) ■Specifications of shooting File format (Extension) JPEG (jpg) The number of files that can be Approx. 4,800 max. ※1※2 saved to P-01F The number of files that can be Approx. 10,244 max.
The actual SAR of this mobile phone while operating can be well below that indicated above. This is due to automatic changes to the power level of the device to ensure it only uses SAR Certification the minimum required to reach the network. Therefore in general, the closer you are to a Information base station, the lower the power output of This model P-01F mobile phone complies the device.
*** Tests for SAR have been conducted using standard operating positions with the phone transmitting at its highest certified power level in all tested frequency bands. This mobile phone complies with the EU Although the SAR is determined at the requirements for exposure to radio waves. highest certified power level, the actual Your mobile phone is a radio transceiver, SAR level of the phone while operating designed and manufactured not to can be well below the maximum value.
Others 82 The SAR limit set by the FCC is 1.6 W/kg.* Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value.
Export Administration Regulations This product and its accessories might be covered by the Japan Export Administration Regulations (“Foreign Exchange and Foreign Trade Law” and its related laws). To export this product and its accessories, take the required measures on your responsibility and at your expenses. For details on the procedures, contact the Ministry of Economy, Trade and Industry.
Powered by Mascot Capsule®/Micro3D Edition™ Mascot Capsule® is a trademark of HI CORPORATION. “Blu-ray Disc” and “Blu-ray” are trademarks of the Blu-ray Disc Association. Other company names and product names described in the text are trademarks or registered trademarks of those companies. Others Others 84 This product contains IrFront of ACCESS CO., LTD. IrFront is a registered trademark or trademark of ACCESS CO., LTD. in the United States, Japan and/or other countries.
The HMM-Based Speech Synthesis Engine in this product uses the Simplified BSD License. -------------------------------------------------The HMM-Based Speech Synthesis System (HTS) hts_engine API developed by HTS Working Group( http://hts-engine.sourceforge.
Unlocking SIM Others This FOMA terminal supports SIM unlock. When the SIM is unlocked, other operator company’s SIM cards can be used with your FOMA terminal. Contact your nearest docomo Shop for unlocking SIM. You are charged separately a charge for unlocking SIM. If other operator company’s SIM is used, restrictions may be applied to some of the services or the functions. Note that NTT DOCOMO, INC. cannot provide any guarantees for operating the FOMA terminal when using other company’s card.
Index A AC adapter ...........................................21 After-sales service ...............................68 Alarm ....................................................60 Antenna ..................................................4 Area mail ..............................................46 Auto-sort ..............................................45 Auto timer ............................................52 B Back cover .............................................4 Backlight .........................
Others 88 i-mode fault diagnosis site..................70 i-mode mail ..........................................44 Compose ..........................................44 Forward .............................................45 Receive .............................................45 Reply .................................................45 Send..................................................44 i-mode password.................................35 i-motion ................................................
Record message .................................39 Related devices ...................................73 Reset settings ......................................37 Ring volume .........................................31 Status icon ...........................................23 Numerics Strap hole ..............................................4 1Seg .....................................................53 Sub-display ......................................4, 24 1Seg antenna ......................................
Access the following for checking or changing the contents of your contract, or for applying to respective services, and asking for related documents: From i-mode iMenu ▶ お客様サポート (User support) ▶ お申込・お手続き (Applications/Procedures) ▶ 各種お申込・お手続き (Respective applications/procedures) Packet communication charges free From PC My docomo (http://www.mydocomo.com/) ▶ 各種お申込・お手続き “お客様サポート (User support)” and My docomo are available in Japanese only.