P-06C INSTRUCTION MANUAL ’11.
Thank you for selecting the “docomo STYLE series P-06C”. Read this manual before use to correctly operate your P-06C. About manual of P-06C Basic Package The operating procedures for the P-06C are also published as in P-06C Handset Instruction Manual (With Warranty and Back Cover P49) (Japanese version) “使いかたガイド (Guide)” on-screen manual installed onto your FOMA terminal, and “Instruction Manual (Detailed Version)” as a PDF.
Contents FOMA Terminal ································2 What You can Do with P-06C···········3 Part Names and Functions ··············4 Precautions······································6 Handling Precautions ···················· 15 Waterproof Performance ··············· 18 Introduction ▶ P.
Introduction FOMA Terminal 2 P-06C supports W-CDMA system. Because the FOMA terminal uses radio waves, you cannot use it in places where the radio waves do not reach, where they are weak even outdoors, such as inside tunnels, basements, or buildings, or out-of-service area. You might not be able to operate the FOMA terminal even when you are in a place with a fine view such as in a high-rise building or apartment.
What You can Do with P-06C 使いかたガイド (Guide) ▶P.37 ※ This function is available in Japanese mode only. AUTO-GPS ▶P.71 The AUTO-GPS function offers the useful services which provide you with information such as about weather forecast, tour spots, and shops around you. Start by Voice Waterproof Performance ▶P.
Introduction Part Names and Functions ❶ ❷ ❾ ❸ �hPower/End key ❶Air vent For turning on/off the power or ending a For adjusting the pressure inside the FOMA call terminal. ❷Earpiece For listening to the other party’s voice �Numeric keys For entering phone numbers and text ❸Display/Touch panel Sub-display ❹mMenu key For showing the Main Menu Call/Charging indicator Lights while you are receiving a call or message, talking, or charging.
❾ One-push open button Connector terminal Integrated terminal for connecting earphone or for charging, etc. Charging terminal ❶ For using earphone Connect an optional connector-terminal-compatible earphone. When using a connector-terminal-non-comp atible earphone, use an optional plug adapter for connection.
Introduction Precautions ALWAYS FOLLOW THESE DIRECTIONS ■Before using the FOMA terminal, read these safety precautions carefully so that you can use it correctly. After reading the precautions, keep them in a safe place. ■Be sure to observe these safety precautions to prevent you or those around you from inflicting injury and to avoid unnecessary damage to the property.
General precautions for FOMA terminal, batteries, adapters, desktop holder, touch pen, and UIM Do Don’t Don’t Do not use, store or leave the FOMA terminal and its accessories in places with a high temperature such as near fire or places exposed to direct sunlight, or in cars under the blazing sun. Fire, burns, or injury may result. Do not place the FOMA terminal or its accessories inside cooking appliances such as microwave ovens or high-pressure containers.
Introduction Caution Don’t Don’t Do Do Do not place the FOMA terminal or accessories on unstable locations such as wobbly tables or slanted locations. They may fall off and cause injury. Do Do not store in humid or dusty places, or in high temperature environments. Fire, burns or electric shock may result. If the FOMA terminal and its accessories are used by a child, a guardian should explain how to operate them correctly.
Do When talking in Hands-free mode or when a ring tone is sounding, be absolutely sure to keep the FOMA terminal away from your ear. Further, when you play games or play back music with the earphone/ microphone etc. connected, adjust the sound volume to moderate volume. The excessive sound volume impairs your hearing. Further, accidents may result due to the hardness of hearing of surrounding sound. Do Do Do For those with weak heart conditions, the vibrator and ring volume must be adjusted carefully.
Introduction Don’t Don’t 10 The surface of the display is coated by a film that prevents the surface from damage to ensure your safety when you accidentally drop or give shock to your FOMA terminal (for preventing the reinforced glass from scattering). Do not forcibly peel off or give damage to the film. If the display is damaged while you operate the FOMA terminal with the film peeled off, you might suffer an injury.
Don’t If the battery fluid or other material gets into your eyes, do not rub them. Flush your eyes with clean water and seek medical attention immediately. Otherwise, the loss of eyesight may result. Caution Don’t Warning Don’t Do Do Never use the FOMA terminal if it has damages such as deformities or scratches as a result of dropping it. Otherwise, the battery pack may ignite, burst or overheat and its electrolyte may leak.
Introduction Don’t Don’t When plugging the AC adapter into the power outlet, or when unplugging it from the outlet, do not allow metal straps or other metal objects to come in contact with it. Fire, burns or electric shock may result. Do not touch the adapter cord, desktop holder, or power outlet with wet hands. Not wet Fire, burns or electric shock may hands result. Do 12 Do not place heavy objects on the adapter cord. Fire, burns or electric shock may result. Use the adapter at the specified V AC.
Precautions for UIM Caution ■ The description below meets “Guidelines on the Use of Radio-communication Equipment such as Cellular Telephones – Safeguards for Electronic Medical Equipment” by the Electromagnetic Compatibility Conference Japan. Do Warning Do Comply with the following in hospitals or health care facilities: • Do not carry the FOMA terminal into operating rooms, intensive care units (ICU) or coronary care units (CCU). • Turn off the FOMA terminal in hospital wards.
Introduction ■List of materials used Where it is used Where it is used Material/Finishing PC/hard coating Outer casing Display surface Numeric key surface, PC + UV coating Display side surface, Bottom part of display panel, Display back surface※1 Display back surface※2 PC/tin vapor deposition + UV coating ABS/UV coating Battery surface (hinge side) PC + ABS/UV coating Back cover Connector terminal Stainless steel/ nickel plating + tin plating Connector Cover PC, elastomer/UV coating terminal Packing Sili
Where it is used Material/Finishing Polyester PC, Silicon rubber ABS/UV coating Stainless steel Nickel-titanium alloy Stainless steel Zinc alloy/nickel plating Different materials may be used in some areas depending on the body color.
Introduction 16 ■Do not apply excessive force onto the FOMA terminal and battery pack. If you put the FOMA terminal in a bag along with many other articles or sit with the FOMA terminal in a clothes pocket, the display, internal circuitry and the battery pack could be damaged or malfunction. Also, if an external device is left connected to the connector terminal (earphone/microphone terminal), the connector could be damaged, or malfunction. ■Do not rub or scratch the display part with metals.
Notes on handling the UIM ■Do not apply more force than is necessary when installing or removing the UIM. ■The warranty does not cover damage caused by inserting the UIM into some other types of IC card reader/writer. ■Always keep the IC portion clean. ■Use a dry soft cloth such as the one for cleaning glasses to clean the equipment. ■It is recommended that you make separate notes of the information stored on the UIM and keep such notes in a safe Notes on handling adapters and desktop holder place.
Introduction Notes on handling the FeliCa reader/writer 18 ■The FeliCa reader/writer function on the FOMA terminal uses very weak radio waves which do not require to be licensed as radio stations. ■The FeliCa reader/writer is operated on the 13.56 MHz frequencies. When you use another reader/writer nearby, take enough distance between your FOMA terminal and the reader/ writer. Further, ensure that there are no radio stations that use the same frequencies.
Do not use brushes, sponges, soaps, or detergents for washing. After rinsing off the FOMA terminal in water, wipe its surfaces thoroughly using a dry cloth, drain off the water (see page 21), and allow the FOMA terminal to dry out naturally. Sea/pool In the Bathroom Do not soak or drop your FOMA terminal into a bathtub, nor use it in water. Do not soak the FOMA terminal into spa or water containing soap detergent or bath additive.
Introduction Removing/Attaching the Back Cover 20 ■Removing the back cover ① While pushing down on the area around the f mark in direction A, slide the back cover (by 2 mm or more) in direction B to disengage and remove the cover. ③ With the back cover stayed open about 2 mm, match it to the groove on the FOMA terminal. Then while pushing the back cover as a whole downward, slide it in the direction of Approx. 2 mm the arrow, and then install.
Draining Water If you operate the FOMA terminal with water drops left adhered to, the volume level from the speakers might be decreased or sound quality vary. Moisture may have entered inside through the clearance gap of the keys or hinges. Follow the procedures described below to wipe moisture off the FOMA terminal: ① Wipe completely moisture off the surface of the FOMA terminal with a clean dry cloth.
Introduction ③ Lightly push the FOMA terminal against a clean dry cloth, and wipe moisture off the clearance gap of the microphone, earpiece, speaker, keys, or hinges. Do not directly wipe moisture out of joint gap using a cotton swab, etc. ④ Remove the back cover and wipe off any drops of water around the inner cover and the rear surface of the back cover, and then attach the back cover. Never open the inner cover. See page 20 for how to remove the back cover.
2 Before Using Attaching UIM/Battery Pack To insert the UIM/battery pack, remove the back cover, then open the inner cover, and insert. (See page 20) 1 Insert the UIM. When you remove the UIM Pull the tray out and remove the UIM. While releasing the UIM so that it lifts off slightly from the tray, take out the card. With the arrow mark facing up, fit the tab side of the battery pack to the FOMA terminal securely, and then push the battery pack in direction B while pressing it against direction A.
Basic Operation About UIM The UIM is an IC card that holds your information such as phone numbers. You cannot use the FOMA terminal for communications such as voice/videophone calls, i-mode, or sending/receiving mail, unless the UIM is inserted. 24 Charging Charging Using Desktop Holder Call/Charging indicator Ensure that you turn off, close, and take hold of the FOMA terminal when you install or remove the UIM or battery pack. You cannot use the UIM (blue) on your FOMA terminal.
3 Put the bottom of the FOMA terminal into Charging Using AC Adapter Call/Charging indicator AC Adapter’s plug the stopper of the desktop holder (A) to Power Cover socket fit the head to the lock claw, and then Connector depress the FOMA terminal until it clicks AC Adapter Engraved (B). surface Connector terminal 4 When charging is completed, hold the desktop holder with fingers and lift up the head of FOMA terminal to remove. 1 2 3 4 Release buttons Open the cover of the connector terminal.
Turning Power ON 1 Press and hold h for at least one second. Basic Operation After the Wake-up display and notes of waterproof are displayed, the Stand-by display appears. To turn off the power 1. Press and hold h for at least two seconds▶Select “YES”. 1 Set the date and time. You can set the date and time. You can also correct the date and time automatically. 2 Set your Terminal Security Code. You can set your Terminal Security Code required for setting functions. “0000” is set at purchase.
Notifying Your Caller ID on the Other Party’s Phone m▶TEL function▶Dial/Receive setting ▶Caller ID notification 2 Select “Activate/Deactivate”. 3 Select “ON”. 1 m▶本体設定 (Setting) ▶文字表示／入力 (Text display/input) ▶Select language 2 Select “English”. The “バイリンガル (Select language)” setting is saved on the UIM. If you hear the guidance requesting your caller ID, either set the Caller ID notification or add “186” first and then try calling again.
Screen Explanation Viewing Display/Icon Status icon Battery level (estimate) ··········· A microSD card is inserted. Basic Operation ·········· Vibrator is set. Full Low When is shown, charge the battery. Depending on the usage state, the battery level indication might significantly vary. Radio waves reception level (estimate) Strong ·········· Ring Volume is set to “Silent”. ·········· In Manner Mode ···· An alarm is set.
Notification icon ······ New i-mode mail or SMS ······ Missed call ······ Record message ······ Videophone record message ······ 1Seg has automatically terminated (ECO NAVI). Desktop icon ····· i-concier ····· 使いかたガイド (Guide) ···· Sends a mail message to “スグデコ！ (Sugu-deco)” ··· Shows the site of the URL ······ Pedometer ····· Start by voice ····· Quick search 1 2 m▶Setting▶Other setting ▶Motion control setting Basic Operation ······ The mode has automatically changed to eco Mode (ECO NAVI).
Navigation Displays and Key Operations Operating Command Navigation Key Basic Operation Key operations you can perform while you are operating a function are shown at the bottom of the display. (Navigation displays) ■Key assignments and basic navigation displays Moves the cursor or highlighted display up. (Hold down to scroll continuously.) Scrolls the page up. Vo Moves the cursor to the right. Scrolls forward page by page. (Hold down to scroll continuously.) Oo Fixes the operation.
Simple Menu Menu Operation Main Menu Press m from the Stand-by display to show Main Menu. Menu icons Simple Menu is a menu focusing on only basic functions for easy operation. By setting “Simple menu” using the Kisekae tool, you can show the Simple Menu by pressing m from the Stand-by display. Some operating procedures or items which appear on the display in Simple Menu differ from the ones described in this manual. Stand-by display Main Menu Use Mo to highlight a menu icon and press Oo( ).
Functions Starting with Simple Operation Depending on the function, you can start it either by selecting a menu item or by key operation from the Stand-by display. The following are the functions you can start by pressing keys for at least one second. Basic Operation Key Performance Oo Sets/Releases Keypad Lock. Xo Shows the Registration display for Phonebook entries. c Starts 1Seg. l Executes Check mail/message. i Shows the Software list. d Executes Start by voice.
Using Touch Panel You might not be able to operate the Touch Panel depending on the i-αppli program. If this is the case, operate it in the Normal Style. Touch Pen When using the touch pen, touch the touch panel (display) lightly with the tip of the pen. When attaching the touch pen to the FOMA terminal using its strap, remove the cap first, and then attach it. ■Removing the touch pen from the cap 1 Take hold of the cap, turn the pen counterclockwise, and remove it.
Basic Touch Panel Operations Use the touch pen to perform the touch panel operations. Basic Operation Operation Main Operation Select/OK Touch Simply tap the touch panel. Touch an item or control key on the touch panel. Move the cursor or highlighted item on Long touch Touch and keep your finger the touch panel Touch an item long on the list, etc. on the touch panel. Continuous operation Touch a control key long for fast forward, etc.
Setting Display Lock Adjusting the Touch Panel You can set Display Lock to ensure that no further operations using the touch panel will be performed. In this way, you can prevent operations from being carried out in error while you are carrying the FOMA terminal around in a bag. Take the steps below to adjust the Touch Panel operations (where the touched positions are detected). 1 1 Press x in Viewer Style. Switch to the Viewer Style, and operate as instructed below. 2 Touch the center of “+”.
Displaying Touch Menu In Viewer Style, the Touch Menu is displayed. Basic Operation Home Menu 36 When “ ” is touched with Viewer Style selected, the Home Menu is displayed. On the Home Menu, you can register short-cut icons up to six and activate respective functions by touching the corresponding short-cut icon. Notification icons and i-Channel tickers are also shown on this menu. Customize Menu When “ ” is touched with Viewer Style selected, the Customize Menu is displayed.
Using Start by Voice Using Guide You can call up the function by voice. The first time you use this function, select “利用する (Use)” ). on the usage information display, or press c( This function is available in Japanese mode only. You can search and check the operating methods of the functions you want to know and use. You can execute some functions from “使いかたガイド (Guide)”. This function is available in Japanese mode only. 1 Press and hold d for at least one second.
Character Entry You can enter characters on the Registration display for Phonebook entries or the Composition display for mail messages, etc. 1 Select a input mode. Basic Operation Press l( input modes. 2 3 ) to select one of the 1. Press No to specify the area to be converted. 2. Press Bo to move the cursor onto the candidate list. 3. Press Mo to select a conversion candidate. 4. Press Oo to fix the character. Enter characters.
Entering “タダの菓子” in the text of an i-mode mail message. 1 ) Enter hiragana characters in Kanji/Hiragana input mode. 3 Use Co to move the cursor to the right of “の”. 4 Use Bo to move the cursor onto the candidate list ▶Use Mo to highlight “タダ の” and press Oo( ). 5 Use Bo to move the cursor onto the candidate list▶Use o M to highlight “菓子” and press Oo( ). た → Press 4 once and Vo once. だ → Press 4 once and a once. の → Press 5 five times. Basic Operation 2 l▶l( ▶Select the text field.
Sound/Screen Setting Changing Ring Tone Changing the ring tone for incoming voice calls Basic Operation 1 2 m▶Setting▶Sound/Vib./Manner ▶Select ring tone Adjusting Ring Volume Adjusting the ring volume for incoming voice calls 1 2 Select “Phone”. Press c( ) to check the content actually played back or displayed. To set a ring tone for mail messages, videophone calls, and so on, select the corresponding item. 3 Select “Select ring tone”. 4 Select a type of ring tone.
Using Manner Mode Setting Keypad Sound OFF With a single key press, you can set a tone from the FOMA terminal such as a ring tone, keypad sound, and alarm sound silent. When you start Manner Mode, not a sound but the vibration notifies you of incoming calls or messages. You can silence a Keypad sound for when you press a key. 1 2 “ ” appears on the Stand-by display. To release Perform the same operation.
Changing Display Brightness You can adjust the brightness of the display. You can also set to automatically adjust the display brightness according to the ambient light. Basic Operation 1 42 m▶Setting▶Backlight/Illum. ▶Backlight 2 Select “Brightness”▶Select “ON”. 3 Press Bo to adjust the brightness. Lighting off/Power Saver Mode You can set the display brightness to OFF. You can also set the time that elapses before Power Saver Mode activates.
Changing Font Size Using Kisekae Tool Changing the size of all the characters to “X-large”. You can set the ring tone, Stand-by display, menu icons and others at a time. 1 Press and hold 7 for at least one second. Select “Character size”. 3 Select “X-large”. Select “Separate setting” when you want to set the character size of each function separately.
Changing Illumination When Receiving Changing call Illumination for voice calls. Basic Operation 1 m▶Setting▶Backlight/Illum. ▶Illumination setting 2 Select “Illumination in call” ▶Select “Illumination”. 3 Select “Phone”. 4 Switching to the eco Mode With a single key press, you can set the eco Mode that reduces battery consumption. Changing to eco Mode affects items specified in “eco mode setting”, e.g. dimming the display. 1 Press and hold 5 for at least one second.
eco Mode Autostart This setting ensures that the mode will be automatically set to the eco Mode when the remaining battery level has dropped below the set level. “Battery level” of “eco mode autostart” is set to “40%” in default. 1 m▶Setting▶Battery 2 Select “ON”. 3 Set each item▶c( When the “eco mode autostart” is set to “ON”, “ (gray)” will be displayed. When the mobile phone automatically switches to eco Mode, “ ” will be ” will be displayed displayed and “ on the desktop.
Terminal Security Code “0000” at purchase This is a four-to-eight digit number for deleting all files or changing settings. When the display for entering the Terminal Security Code appears, enter your four-to-eight digit code ). and press Oo( Basic Operation To change 1.
PIN Unblocking Key (PUK) The PIN unblocking key (PUK) is the eight-digit number for releasing the blocked PIN1 code and PIN2 code. You cannot change this code by yourself. If you enter a wrong PIN unblocking key (PUK) 10 times in succession, the UIM is locked. In that case contact one of docomo Shops. Various Lock Functions A variety of lock functions is installed on your FOMA terminal such as preventing illegal use of a third party, or protecting your private information.
Basic Operation Omakase Lock ■Setting/Releasing Omakase Lock 0120-524-360 (In Japanese only) Business hours: 24 hours (open all year round) ※Unavailable from some IP phones. You can set/release also from the My docomo site via your personal computer or other devices. (In Japanese only) Original Lock Keypad Lock 48 When you have lost your FOMA terminal or in other cases, you can lock your personal data (such as Phonebook entries) and the IC card function of Osaifu-Keitai by contacting DOCOMO.
Setting Incoming Call Restriction Resetting to Default You can set whether to receive (accept) or not to receive Resetting the Function Settings to Default (reject) incoming calls depending on the reason, such as from You can reset the items on “Function List”, which are the parties which has not been registered in Phonebook or indicated by . (See page 102) incoming calls from any parties who do not notify you of their might include the functions The items indicated by phone numbers.
Call Telephone Making a Call/Videophone Call Connect Making a Call by Entering the Phone Number 1 Enter a phone number starting with a city code. 2 Press d to make a call. Press c( 3 ) to make a videophone call. Search a Phonebook entry by the name stored in Phonebook 1 Press Xo. 2 Select “Search name”. Enter the reading of the name from the first character. You can use another search method such as “Search phone No.”, and “Search e-mail”.
Making a Call with Redial/Received Calls Making an International Call 1 Press Vo(Redial) or Co(Received calls). 2 Select a call record▶d You can use WORLD CALL to make an international call from Japan. Contact “docomo Information Center” on the back page of this manual for inquiries about details on WORLD CALL. When using international carriers other than DOCOMO, contact them. Press c( ) to make a videophone call.
Receiving a Call/Videophone Call 1 A call comes in. The ring tone sounds and the Call/Charging indicator lights. 2 Press d to answer the call. Connect When a videophone call comes in You can receive the videophone call the same way as with a voice call. The substitute image is sent to the other party. 3 Press h to end the call. By activating Record Message, you can record a caller’s voice/video message when you cannot answer the call.
Using Public Mode (Drive Mode) Using Public Mode (Power Off) When Public Mode (Drive Mode) is set, callers who place calls to you will hear voice guidance telling them that you cannot respond to their calls because you are now driving or in a public place (such a train, bus or movie theater) where you cannot talk freely, and their calls are automatically ended.
Using Various Network Services Connect ■Network services available The following are the DOCOMO network services available for the FOMA terminal.
Using Voice Mail Service Using Call Waiting Service 1 1 m▶TEL function▶Voice mail service To activate the service 1. Select “Activate”▶Select “YES”. You can also specify a ring time. To play back the message 1. Select “Play messages”▶Select “Play (voice call)” or “Play (videophone)”▶Select “YES”. 2. Operate following the voice guidance. m▶TEL function▶Other network serv. ▶Call waiting To activate the service 1. Select “Activate”▶Select “YES”. Answer an Incoming Call during a Call Press d.
Emergency Call Emergency Calls Connect Calls to police Calls to fire station and ambulance Calls for accidents at sea 56 Phone number 110 119 118 This FOMA terminal supports “Emergency Location Report”. When you make an emergency call such as at 110/119/118, information about the place where you are dialing from (location information) is automatically notified to emergency-response agencies such as police stations.
Using Overseas Major Communication Service Voice call※1 Videophone call※1 SMS※2 i-mode※3 i-mode mail i-Channel※3※4 i-concier※5 i-Widget※6 Packet communication by connecting with a personal computer Position location of GPS※7 3G ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○: Available ※1 When using 2in1, you cannot make calls using your B number. When using Multi Number, you cannot make calls using an additional number. ※2 If the destination is a FOMA terminal, enter the other party’s phone number as you do in Japan.
Making a Call to Outside the Country You Stay in Connect 1 0(for at least one second) ▶Enter numbers in order of country code →area code (city code) →destination phone number. Enter “81” as a country code when you make an international call to Japan. When the area code (city code) begins with “0”, enter the area code without “0”. However, include “0” when making a call to some countries or regions such as Italy.
Sending Deco-mail Sending Decome-Anime You can change the color or size of characters or background You can create impressive messages by inserting text or color, or insert images or Deco-mail pictograms. images into a Flash file. 1 2 3 l▶l( ) You can also select “Decome-Template” to create Deco-mail. Enter an address and subject. 1 l▶Create new Deco-Anime 2 Enter an address and subject. 3 Select the text field▶d from the palette▶Enter text ) ▶Oo( 4 Press c( ).
Displaying Received i-mode Mail Replying to i-mode Mail 1 Select a folder. Press c( displayed. 2 Enter each item. Select an i-mode mail message. 3 Press c( 1 l▶Inbox 2 3 ) while an i-mode mail is ). Forwarding i-mode Mail Connect 1. m( ) while an i-mode mail is displayed ▶Reply/Forward▶Forward 2. Enter each item. 3. Press c( ). When you receive an i-mode mail ” appears on the message, “ upper area of the display.
Checking New i-mode Mail Sorting i-mode Mail You can check the i-mode Center for a new mail message or Message R/F. You can use “Auto-sort” to sort received/sent i-mode mail messages into a folder such as “Business” or “Friend” which has been created in advance. Sorting mail messages, which come from the address stored in the Phonebook, into a folder 1 Press and hold l for at least one second. When checking is completed, the following display appears.
Early Warning “Area Mail” Receiving Area Mail Connect You can receive information such as about earthquake alerts that are issued from the Japan Meteorological Agency as an Area Mail message. ” lights and the When an Area Mail message arrives, “ buzzer for Area Mail sounds. The received content of some messages is automatically displayed. To erase the displayed content, select “OK”. You can receive Area Mail messages even when you are not contracted to use i-mode.
Displaying Received SMS Message 1 l▶Inbox Phonebook Storing Phonebook Entries 2 Select a folder. Storing New Phone Numbers/Mail Addresses, etc. 3 Select an SMS message. You can store Phonebook entries in the FOMA terminal (Phone) or on the UIM. 1 Select “Phone”. The display for entering a name appears. Enter a name and proceed. When storing entries onto the UIM Phonebook Select “UIM”. When you receive an SMS message, “ ” appears on the upper area of the display.
Storing Phonebook Entries from Redial/ Received Call 1 Press Vo(Redial) or Co(Received calls). 2 Highlight a call record and press m( )▶Select “Add to phonebook”. Connect 3 Select “Phone”▶Select “New”. 4 Enter each item. 5 Press c( ). 1 2 Xo▶Search and select a Phonebook entry. m( )▶Edit phonebook ▶Select an item to be edited ▶Edit the contents. 3 Press c( 4 Select “YES”. ).
i-mode/Full Browser Displaying i-mode Sites 1 Press i. Search i-mode is a service that enables you, by using the display of the terminal supporting i-mode, to use online services such as site access, Internet access, and i-mode mail. i-mode is a pay service that is available on a subscription basis. For details on i-mode, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”. You can display SSL/TLS※-compatible pages via FOMA terminal.
Search Displaying Websites Designed for PC 1 1 m▶imode/web▶Full Browser Home By default, a confirmation display appears asking whether you want to use Full Browser. You might not correctly display some Internet websites. 66 Switching Browsers You can browse Internet websites designed for PCs using the You can switch to Full Browser to show the Internet websites Full Browser function. incorrectly displayed by i-mode.
Viewing and Operating Sites Saving Site Contents Operations on site viewing display Scroll display/Move highlighted/ Move the pointer: Mo Select an item (link): Oo( 1 ) Return to previous page: l( ) 2 ) “ ” or “ ” appears while accessing by Full Browser. Pointer Storing Frequently Accessed Sites Bookmark websites or i-mode sites you frequently visit to get them displayed easily. 1 2 m( m( ) while the site is displayed ▶Screen Memo▶Save screen memo Select “Phone”▶Select “YES”.
Search i-Channel 68 This service distributes information such as news and weather forecast to i-Channel mobile phones. The automatically received latest information flows on the Stand-by display by tickers. You can read it on the i-Channel list by pressing -r. Further, two types of channels, “Basic channel” provided by DOCOMO and “Okonomi (Optional) channel” provided by IPs (Information Providers) are available.
Map/GPS Search GPS is a function that receives signals from the GPS satellites and acquires information on the FOMA terminal’s position. This GPS function cannot be used as a navigation device for airplanes, vehicles or people or as a device for conducting high-accuracy surveying. If it is used for these purposes or even if it is used for other purposes, bear in mind that NTT DOCOMO INC.
Reading Map Checking Current Location You can start GPS compatible i-αppli, and you can read a map of current or specified location. At purchase, “地図アプリ (Map Application)” is set. You can locate your current location by GPS. You can also display a map using this location information and send this information as an i-mode mail. You are not charged a packet communication fee for checking your current location.
Using AUTO-GPS Setting AUTO-GPS You can set whether to use AUTO-GPS function. (“ON” is set at purchase.) AUTO-GPS function uses your stride when determining your movements so you can set your stride as well. 1 m▶Map/Overseas ▶Map&GPS set./history▶AUTO-GPS ▶AUTO-GPS setting 2 Select “ON”. 3 Enter a stride (cm).
Camera Viewing and Operation of Finder Display MENU You can check the settings. Key guidance The key operation guide is displayed. Focus frame When a subject is focused on, the frame becomes green. Zoom bar Enjoy The zooming status is displayed. Time of recordable moving picture Number of recordable image Shows the remaining time of recordable moving pictures. Shows the number of remaining recordable still images.
Shooting Still Images/Moving Pictures Shooting Still Images 1 m▶CAMERA/TV/MUSIC▶CAMERA ▶Digicam mode 2 Press Oo( ). 3 Press Oo( ). When shooting images by touch operations When shooting images in Viewer Style, you can touch the touch panel to shoot the images instead of pressing x. (Touch Shutter） ] on the shooting screen to set it to . Then Touch [ touch the subject, and shoot. Shooting Moving Pictures Start recording by pressing i from the Finder display for Digicam Mode.
Shooting in Various Ways Continuous Shooting Still Images You can continuously shoot still images within the sizes from 3M (1536 x 2048) to Stand-by (480 x 854). Enjoy The camera automatically shoots identifying the number of faces and the distance between faces by face detection. Using “Group shutter” to shoot a group of three persons 1 m( ) from the Finder display for Digicam Mode▶Cont. set.
1Seg Using 1Seg Enjoy ■Using 1Seg 1Seg is a service provided by television entrepreneurs (broadcasting stations). You are not charged a communication fee for receiving video and audio. For about fee charged by NHK, contact NHK. ※You are charged a packet communication fee for browsing “Data broadcasting site” and “i-mode site”. You might be charged an information fee for using some sites (i-mode pay sites).
Setting Channels When you activate 1Seg for the first time or change the area you are in, you need to operate “Channel setting”. Select “Auto channel setting” to enable you to search automatically for broadcast stations you can watch. You need to set this function with the 1Seg antenna extended when you are in a terrestrial digital TV broadcasting service area. Enjoy 1 76 Watching 1Seg 1 Press and hold c for at least one second. 1Seg starts and the viewer display appears.
Viewing and Operating Viewer Display Displayed while you are watching a 1Seg program Video being recorded Program Information (outline) Video Switch Visual Image/Caption Caption Airwave Reception Level (estimate) Data Broadcasting Strong Weak ” appears out of the broadcasting area.
Setting Timer Watching or Recording 1Seg Enjoy Set the date and time, a channel, and program name, and enter them to the TV Timer List or Timer Recording List. When the set time arrives, watching or recording starts. 78 1 m▶CAMERA/TV/MUSIC▶1Seg 2 Select “TV timer list” or “Timer recording list”. 3 Press c( 4 Enter each item. 5 Press c( Playing Recorded Video 1 m▶Data box▶1Seg 2 Select “Video”▶Select a file. ). ).
Music Music&Video Channel 1 2 m▶CAMERA/TV/MUSIC ▶Music&Video Channel▶Program set. Follow the instructions on the display to set a program. The program automatically downloads at night. Playing Programs 1 2 m▶CAMERA/TV/MUSIC ▶Music&Video Channel Select a program.
Downloading Chaku-uta Full® Music Files You can download Chaku-uta Full® music files from sites. 1 Select a Chaku-uta Full® music file from a downloadable site. 2 Select “Save”▶Select “YES”. 3 Select a destination folder. Enjoy “Chaku-uta Full” is a registered trademark of Sony Music Entertainment Inc. ■Handling music files You can use music files saved on the microSD card for personal use only.
i-αppli/i-Widget i-αppli is a software program for terminal supporting i-mode. By downloading various software programs from the i-mode site, you can use your FOMA terminal more conveniently. You can automatically update the stock price information or weather information, and enjoy games without accessing network. i-Widget is a useful function for gaining easy access to frequently used contents and tools (Widget Appli programs) such as the calculator, clock, memo pad and stock market information.
Enjoy Downloading i-αppli from Sites 82 1 Select a software program from a downloadable site. 2 Select “OK” when downloading ends. 3 Select “YES”. When the software program is storable in “Customize Menu”, the confirmation display appears asking whether to store it. You can delete the pre-installed i-αppli programs. You can re-download deleted programs from the “P-SQUARE” site.
i-motion/Movie i-motion is a file consisting from video, audio, and music which you can download to your FOMA terminal from i-motion sites that support i-motion. You can also set it for a ring tone. Also, by using high speed communication, you can play back smooth and high-quality movie files provided by portal sites, movie specialty sites and other sites on the Internet. When downloading or streaming an i-motion/movie file, you might receive a bulky file.
Osaifu-Keitai More Convenient Osaifu-Keitai/ToruCa Osaifu-Keitai is equipped with the IC card which enables you to make payments, use coupons, enjoy stamp rallies and so on by placing the FOMA terminal over the scanning device in the stores or other locations. Furthermore, by placing the FOMA terminal over a scanning device, you can access sites and web pages, obtain the latest coupons by communication, and check the deposits of electronic money and the status of its use.
i-concier 1 2 When information arrives, blinks and the content is displayed on the Stand-by display. Select a message ▶Select a piece of information. Displaying i-concier 1 m▶i-concier▶インフォメーション一覧 (Information list) 2 Select a piece of information. More Convenient i-concier works to serve you with a pleasant life just like a clerk or concierge does. The service holds your data (area information about your neighborhood, Memo, Schedule, ToruCa, Phonebook, etc.
Convenient Tools Using Schedule 1 1 m▶Tool▶Alarm 2 Highlight an alarm and press c( 3 Enter each item. 4 Press c( m▶Tool▶Schedule More Convenient Select a date to show a schedule event of the selected date. Select the schedule event to confirm its details. 86 Using Alarm 2 m( 3 Enter each item. 4 Press c( )▶Select “New”. ). The alarm does not sound in Public mode (Drive mode), Dial Lock, “Alarm” locked in Original Lock or Omakase Lock. ). ).
Using Bar Code Reader Scan a Code Access P-SQUARE by using You can use the camera to scan QR codes and others, and QR code on the right store them as files. From the scanned data, you can make calls, compose i-mode mail messages, access Internet websites, and so on. QR code for ■When scanning with Bar Code Reader accessing the site Guide frame Scan the code as large as possible within the guide frame.
More Convenient Using Pedometer 88 As you walk with your FOMA terminal in hand or in your pocket, your pace is measured, and then depending on the measured results, your distance, calories consumed, and body fat burned are displayed. ■Caution when using Pedometer If you have not yet set Set Main Time, you cannot use this function. When you use Carry Case L 01/Carry Case 02 (option) to house it, fasten it to your waist belt.
Data Management Using microSD Card 1 With the metal terminal surface facing downward, make sure that the cut edge is positioned at right and then insert. Push it until it clicks. When you remove the microSD card Push the microSD card until it stops and remove it. Note that the microSD card may pop out when you insert or remove it. The inserting slot of the microSD card is in the inside of the back cover. To insert it, remove the back cover and open the inner cover, and then remove the battery pack.
Icons on the Display : A microSD card is inserted. : Data is being read/written. (Do not remove the microSD card nor turn off the FOMA terminal.) : The microSD card is write-protected. More Convenient : The microSD card cannot be used. (Insert the microSD card again. If “ ” is still displayed, execute “Check microSD” or “microSD format”.) 90 Formatting microSD Card When you use the microSD card for the first time, you need to format (initialize) it. Be sure to use P-06C for formatting.
Copying Data to microSD Card Displaying Data Stored on microSD Card Copying a still image Displaying a still image 1 1 m▶Data box▶My picture▶l( 2 Select a folder▶Select an image. 2 m▶Data box▶My picture ▶Select a folder. Highlight a still image to be copied and press m( ) ▶Select “Copy to microSD” ▶Select “Copy this”. Check Capacity of microSD Card You can display the total memory and used memory (estimated) on the microSD card. 1. m▶Tool▶microSD▶Refer microSD data 2.
Backing up Data to microSD Card More Convenient You can back up Phonebook entries, schedule events, messages, memos, bookmarks, and the settings on and information about your FOMA terminal collectively onto the microSD card. When restoring the backup data onto your FOMA terminal, they are collectively restored. Backing up data from the FOMA terminal onto the microSD card is collectively applied to all data, so emptied files in the FOMA terminal are also backed up on the microSD card.
Sending Data For infrared communications, set the receiving end terminal first, and then start sending data within 30 seconds. Connecting to a PC You can connect the FOMA terminal to a personal computer to exchange WMA files, images or other files stored on microSD card. Submenu of the data to be sent You can also access the Internet to perform data ▶Select “Send Ir data” or “iC communication. ※You need the FOMA USB Cable with Charge Function 02 transmission”. (option) or FOMA USB Cable (option).
Support Troubleshooting First of all, check to see if you need to update the software program and then update it if necessary. See page 98 for how to update software programs. When symptom persists even after you check the countermeasures for the problem you suffer, contact the “Repairs” counter listed on the back page of this manual or a repair counter specified by DOCOMO. The “Repairs” counter is available in Japanese only. Power source The FOMA terminal does not turn on.
The usable time of the battery is short. …Make sure not to leave the FOMA terminal out-of-service-area for a long time. If your FOMA terminal is left out-of-service area, it searches for radio waves to establish communications, consuming more power. …The usable time of the battery pack varies depending on the usage environment or its remaining life. …Battery packs are consumables. The usable time slightly shortens each time you charge the battery.
Warranty and After-sales Service Warranty Make sure that you have received a warranty card provided at purchase. After checking the contents of the warranty card as well as “Shop name and date of purchase”, keep the warranty card in a safe place. If you notice that necessary items of the warranty card are not filled in, immediately contact the shop where you purchased the FOMA terminal from. The term of the warranty is one year from the date of purchase.
i-mode Fault Diagnosis Site You can check on your FOMA terminal whether sending/ receiving mail messages, downloading images/melodies, and others are normally working. When you think your FOMA terminal is in trouble as a result of your check, contact the “Repairs” counter listed on the back page of this manual. The “Repairs” counter is available in Japanese only.
Others Updating Software 98 This function is to check whether you need to update software programs in the FOMA terminal by connecting to the network, and if necessary, you can download some parts of software programs using packet communication, and can update the software programs. If you need to update the software programs, the DOCOMO website and “お客様サポート (User support)” in Japanese iMenu lets you know information about updating software programs.
Start Software Update from Icon Start Software Update from Menu 1 1 Select “Update notification icon” on the Stand-by display. Update notification icon Check whether you need to update software programs. 2 When update is necessary, “Update is needed” is displayed. And you can select either “Now update” or “Reserve”. 2 Enter your Terminal Security Code ▶Select “Update”. 3 Go to step 2 of “Start Software Update from Icon” on page 99. Others When you select “Now update”, update immediately starts.
Check Harmful Data You can detect data or application programs, which might cause troubles, from among those downloaded to your FOMA terminal, and then can delete the data or stop starting the application programs. This scan function provides a certain protective measure to filter out data that might cause troubles with your FOMA terminal at the time when you browse websites or receive messages.
Options and Related Devices Combining various options with the FOMA terminal, you can realize more versatile use from personal purpose to business purposes. Some products may not be dealt in depending on the area. For details, consult a handling counter such as a docomo Shop. For details on options, refer to the user’s manuals of respective options and related devices.
Function List Mail Execute “Resetting the Function Settings to Default” on page 49 for the items indicated by to return to the respective defaults.
Software list iαppli data iαppli call logs iαppli run info iαppli setting End stand-by info End Widget appli info Security error history Auto start info Trace info Auto-start setting Disp.
Tool Image Video Position memory Document viewer Font SD other files Search all history Bar code reader Phrases/Store word Scan code Saved data Receive Receive all Schedule Memo Pedometer Phonebook Others 104 microSD Guide Voice recorder mixi setting PicMate setting GREE setting Update phonebooks etc. Update images Update setting info Setting/History Refer microSD data Search phonebook Add to phonebook UIM operation Phonebook set./Check Forwarding image Choku-Den Rec. msg.
Videophone setting Call duration/charge Koe-no-Takuhaibin Missed call notice Visual preference Select image Auto redial as voice Other network serv. Ntfy switch-mode Reject videophone Hands-free switch V.
Backlight/Illum. Text display/input Others Time Lock/Security Setting Character input set バイリンガル Set main time Sub clock setting Clock display Auto power ON Auto power OFF Lock Keypad lock Secret mode Secret data only mode Call rejection set. Change security code UIM setting Scanning function Timer lock ON at close IC card lock setting eco mode Battery External connection Other setting Map/Overseas Setting Sound/Vib.
Overseas NW search Overseas setting IC card content DCMX ToruCa IC card lock setting Setting IC card lock IC lock (power-off) ToruCa settings Receive ToruCa IC card notice set Check IC owner Change IC owner Search by imode Character input Home Menu Customize Menu Others Overseas use guide i-concier Roaming guidance Int’l dial assistance imode service set. Mail/Message usage set Network service Profile Osaifu-Keitai Map&GPS set./history Map setting GPS button setting Location request set.
Specific Absorption Rate (SAR) of Mobile Phone Others SAR Certification Information 108 This model P-06C mobile phone complies with Japanese technical regulations and international guidelines regarding exposure to radio waves. This mobile phone was designed in observance of Japanese technical regulations regarding exposure to radio waves* and limits to exposure to radio waves recommended by a set of equivalent international guidelines.
European RF Exposure Information This mobile phone complies with the EU requirements for exposure to radio waves. Your mobile phone is a radio transceiver, designed and manufactured not to exceed the SAR* limits** for exposure to radio-frequency (RF) energy, which SAR* value, when tested for compliance against the standard was 0.877 W/kg. While there may be differences between the SAR* levels of various phones and at various positions, they all meet*** the EU requirements for RF exposure.
station antenna, the lower the output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the U.S. government-adopted requirement for safe exposure. The tests are performed in various positions and locations (for example, at the ear and worn on the body) as required by FCC for each model. The highest SAR value for this model phone as reported to the FCC when tested for use at the ear is 0.
Intellectual Property Right Copyrights and Portrait Rights Powered by JBlend™ Copyright 2002-2011 Aplix Corporation. All rights reserved. JBlend and JBlend-related trademarks are trademarks or registered trademarks of Aplix Corporation in Japan and other countries. f is a registered trademark of FeliCa Networks, Inc. microSDHC Logo is a trademark of SD-3C, LLC.
Others Others 112 This product contains NetFront Browser, NetFront Document Viewer and NetFront Sync Client of ACCESS CO., LTD. ACCESS, the ACCESS logo, and NetFront are registered trademarks or trademarks of ACCESS CO., LTD. in the United States, Japan and/or other countries. Copyright © 2011 ACCESS CO., LTD. All rights reserved. This software is based in part on the work of the Independent JPEG Group. This product contains IrFront of ACCESS CO., LTD.
- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - Neither the name of the HTS working group nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
Access the following for checking or changing the contents of your contract, or for applying to respective services, and asking for related documents: From i-mode ｉMenu ▶ お客様サポート (User support) ▶ お申込・お手続き (Applications/Procedures) ▶ 各種お申込・お手続き (Respective applications/procedures) Packet communication charges free From PC My docomo (http://www.mydocomo.com/) ▶ 各種お申込・お手続き “お客様サポート (User support)” and My docomo are available in Japanese only. You will need your “network ID” for the access from i-mode.
Loss or theft of FOMA terminal or payment of cumulative cost overseas (available 24 hours a day) ■ From DOCOMO mobile phones International call access code for the country you stay at -81-3-6832-6600* (toll free) Failures encountered overseas (available 24 hours a day) ■ From DOCOMO mobile phones International call access code for the country you stay at -81-3-6718-1414* (toll free) * You are charged a call fee to Japan when calling
General Inquiries Repairs 0120-005-250 ■ From DOCOMO mobile phones ■ From land-line phones (toll free) * Service available in English, Portuguese, Chinese, Spanish, and Korean. * Unavailable from part of IP phones. (Business hours: 9:00 a.m. to 8:00 p.m.) ■ From DOCOMO mobile phones ■ From land-line phones (In Japanese only) (No prefix) 151 (toll free) * Unavailable from land-line phones, etc.
