P-07B INSTRUCTION MANUAL ’10.
DOCOMO W-CDMA System Thank you for selecting the “docomo STYLE series P-07B”. Read this manual before use to correctly operate your P-07B. About operation explanation of P-07B The operating procedures for the P-07B are also published in electronic form as in “使いかたナビ (Guide)” that is installed onto your FOMA terminal, and “Instruction Manual (Detailed Version)” as a PDF.
Contents Before Using······························16 FOMA Terminal·····································2 What You can Do with P-07Ba���������������3 Part Names and Functions···················4 Precautions···········································6 Handling Precautions·························13 Introduction Character Entry·························26 Lock/Security·····························33 Basic Operation Charging, Power ON/OFF, etc.
Introduction FOMA Terminal 2 Because the FOMA terminal uses a radio wave, you cannot use it in places where the radio wave do not reach, where it is weak even outdoors, or where are out-of-service area, such as inside tunnels, basements, or buildings. You might not be able to operate the FOMA terminal even when you are in a place with a fine view such as in a high-rise building or apartment.
What You can Do with P-07B ※This function is available in Japanese mode only. International Roaming ■▶P.45 You can use the FOMA terminal overseas the same way as you use it in Japan, including phone number and mail address. (3G areas are supported.) eco Mode ○○ Railway Suspension of the service now... ▶P.33 You can easily switch to the eco Mode to minimize battery consumption by a simple key operation.
Introduction Part Names and Functions ❶■Earpiece For listening to the other party’s voice ❶ ❷Display ❷ ❸ ❹ ❺ ❻ ❼ ❾ � � � � ❸Light sensor For sensing brightness (Do not cover it with your hands or do not put a sticker on it. Doing so might disable you to detect the brightness.
�Call/Charging indicator Lights while you are receiving a call or message, talking, or charging. � � �.>Side ▼ key For turning down the earpiece volume during a call �Private window �■Strap hole �One-push open button For opening the FOMA terminal (Be careful not � to drop the FOMA terminal by the rebound when � opened.) �Infrared data port For using infrared communication and the infrared remote control �Back cover Remove this when attaching/removing the battery pack, UIM and microSD card.
Introduction Precautions ALWAYS FOLLOW THESE DIRECTIONS ■Before using the FOMA terminal, read these safety precautions carefully so that you can use it correctly. After reading the precautions, keep them in a safe place. ■Be sure to observe these safety precautions because they are designed to protect you or those around you from causing injury and to avoid unnecessary damage to the property.
General precautions for FOMA terminal, batteries, adapters, and UIM Do not use, store or leave the FOMA terminal and its accessories in places with a high Don’t temperature such as near fire or places exposed to direct sunlight, or in cars under the blazing sun. Fire, burns, or injury may result. Do not place the FOMA terminal or its accessories inside cooking appliances such as microwave Don’t ovens or high-pressure containers. Fire, burns, injury or electric shock may result.
Do Be especially careful when you use the FOMA terminal for a long time with the adapter connected. Do Introduction If you use the i-αppli programs, talk on the videophone, watch 1Seg programs and so on for a prolonged period of time while charging, the temperature of the FOMA terminal, battery pack or adapter may rise.
Do not use the FOMA terminal if it has been damaged. Don’t Fire, burns, injury or electric shock may result. Otherwise, you may impair your eyesight or damage your skin. If this substance should get into your eyes or mouth, immediately rinse them with clean water, and then seek medical attention. If it should adhere to your skin or clothing, immediately wipe it off with alcohol or similar liquid, and then rinse the affected area with soap and water.
Introduction Caution Do not dispose of the exhausted battery with other waste. Don’t The battery may catch fire or damage the environment. After insulating the battery terminals with tape, take the unneeded battery to a handling counter such as a docomo Shop or dispose of it in accordance with local waste disposal regulations. Do not use or attempt to charge a wet battery. Don’t Do Otherwise, the battery pack may ignite, burst or overheat and its electrolyte may leak.
When you do not intend to use the adapter for a long period of time, disconnect the power Pull the plug from the power outlet or power plug cigarette lighter socket. Comply with the following in hospitals or health care facilities: Fire, burns or electric shock may result. If liquids such as water get in the adapter, unplug the power cord immediately from the outlet Pull the or cigarette lighter socket. Do power plug Fire, burns or electric shock may result.
Introduction ■ of materials used ■List Where it is used Outer casing Display surface, Projection part of hinge area Private window surface, Operation key surface, Battery surface, back cover Connector terminal Connector terminal cover Camera panel Projection of camera panel sides Side ▲ key, Side ▼ key Charging terminal Operation key Center part of the surface command navigation key Key area Sheet area Open/close stopper Light sensor area Display panel Battery compartment surface Battery Resin part termina
Handling Precautions General notes The FOMA terminal, battery, adapter, and UIM are not waterproofed. Do not use them in environments, which are high in humidity such as in bathrooms, and do not allow them to get wet from rain. Furthermore, if carrying them against your body, they become moist due to perspiration and the internal parts may become corroded, causing malfunction.
■ not bring magnetic substances close to ■Do your FOMA terminal. Introduction Problems with operation may result if items with strong magnetic fields are brought close to the FOMA terminal. Notes on handling batteries ■ have a limited life. ■Batteries Though it varies depending on the usage state, you are advised to replace the battery if its usable time is extremely short even when you fully charge it. Make sure that you buy the specified battery.
Caution ■ not use the modified FOMA terminal. ■Do Using a modified FOMA terminal infringes the Radio Law. Introduction The FOMA terminals are granted technical regulations conformity certification as the specified radio equipment under the Radio Law and bear a “technical conformity mark ” on the nameplate as evidence of conformity. Unscrewing the FOMA terminal and modifying internal components void the technical regulations conformity certification.
Before Using 3 Attaching UIM (FOMA Card)/Battery Pack Basic Operation 1 2 Remove the back cover. While pressing the “ ” part of the back cover in direction A, slide the back cover (2 mm or more) in direction B to unlock and remove it. When you remove the UIM While sliding the UIM, pull it out slowly. 16 With the arrow mark facing up, fit the tab side of the battery pack to the FOMA terminal securely, and then push the battery pack in direction B while pressing it against direction A.
Ensure that you turn off, close, and take hold of the FOMA terminal when you install or remove the UIM or battery pack. You cannot use the UIM (blue) on your FOMA terminal. If you have that blue one, have it replaced at a docomo Shop. Charging ■Charging Using the Desktop Holder 1 About UIM The UIM is an IC card that holds your information such as phone numbers.
■Charging Only with the AC Adapter Basic Operation 1 2 Pull out the cover Cover of the connector terminal in Release direction A, buttons and turn it in direction B. Insert the connector with the engraved surface facing up until it clicks. 1 Connector terminal Engraved surface For detaching, pull out the connector horizontally while pressing the release buttons. Malfunction could result if you try to pull it forcibly. When charging starts, the Call/Charging indicator lights in red.
Configuring Initial Setting The Initial Setting display appears when you turn on the power for the first time. 1 Checking Your Own Phone Number 1 Set the date and time. You can press o to switch the tabs. N+ From the display on the right, press +l( ) to store your name, mail address, etc. Refer to “Mobile Phone User’s Guide [i-mode] FOMA version” Own number for how to check or change your mail address. You can check your own phone number also by pressing +m-0 from the Stand-by display.
Screen Explanation Viewing Display/Icon Battery level (estimate) Status icon Basic Operation ········ Vibrator is set. Full Low is shown, charge the battery. When Depending on the usage state, the battery level indication might significantly vary. Radio waves reception level (estimate) Strong Weak ······· You are out of the FOMA service area or radio waves do not reach. ········ Ring Volume is set to “Silent”. ········ In Manner Mode ···· An alarm is set. ········· View Blind is set.
Notification icon ····· New i-mode mail or SMS ······Missed call ·······Record message Various information is displayed on the Private window like the following examples: Information is displayed for about 15 seconds in cases such as when you press . with the FOMA terminal closed. Desktop icon ······使いかたナビ (Guide) ······i-concier ·····Battery/eco mode set. Clock Receiving a call When you have found a missed call, new mail or message Status Press.
Basic Operation Played back an Animation on the Private Window When “Illum. when closed” is set to “ON” and select an item, the animation is played back on the Private window when FOMA terminal is closed. 1. +m from the Stand-by display▶Set./Service ▶Illumination▶Illum. when closed▶ON 2. Select an item. At the time of purchase, “Happy Illumi” is selected, and this randomly plays a special animation sequence once every five times.
Navigation Displays while Dialing 2. Press +Zo. +Zo the cursor or Moves highlighted display up. (Hold down to scroll continuously.) the page up. Scrolls +Vo the cursor to the Moves right. forward page by Scrolls page. (Hold down to scroll continuously.) +Oo the operation. Fixes +Co the cursor to the left. Moves back page by page. (Hold Scrolls down to scroll continuously.) +Xo the cursor or Moves highlighted display down. (Hold down to scroll continuously.
■Simple Menu Menu Operation ■Main Menu Press +m from the Stand-by display to show Main Menu. Basic Operation Menu icons Stand-by display Main Menu Menu icon name In this manual, the item names shown here are described in operating procedures, etc. ). Use +Mo to highlight a menu icon and press +Oo( Functions categorized by the menu items are displayed. Repeat selecting items to call up the target function. can press -r to return to the previous display.
Function menu When “ ” is displayed at the lower right of the display, you can use functions such as Store, Edit, and Delete by pressing +i. Display the Function menu of a Phonebook entry a function can be operated also by a key, the When numeric key number or other marks may appear on the right of the function name. Depending on the function, you can start it either by selecting a menu item or by key operation from the Stand-by display.
Character Entry You can enter characters on the Registration display for Phonebook entries or the Composition display for mail messages, etc. Basic Operation 1 Each time you press +l( input modes are switched. ), 3 Convert/fix characters. 1. Press +No to specify the area to be converted. 2. Press +Bo to move the cursor onto the candidate list. 3. Press +Mo to select a conversion candidate. 4. Press +Oo to fix the character.
Entering “タダの菓子” in a text memo. +m from the Stand-by display▶Stationery ▶Text memo ▶Select . 3 Use +Co to move the “の”. cursor onto “ 2 Enter hiragana characters in Kanji/Hiragana input mode. 4 Use +Bo to move the cursor onto the candidate list▶Use +Mo to highlight “タダの” and press ). Oo( 5 Use +Bo to move the cursor onto the candidate list▶Use +Mo to highlight “菓子” and press Oo( ). た → Press -4 once and +Vo once. だ → Press -4 once and -a once. の → Press -5 five times.
Sound/Screen Setting Changing Ring Tone Basic Operation Changing the ring tone for incoming voice calls 1 1 +m from the Stand-by display ▶Set./Service▶Sound ▶Select ring tone 2 2 Select “Phone”. 3 3 28 Adjusting Ring Volume Adjusting the ring volume for incoming voice calls ) to check the content actually Press +l( played back or displayed. To set a ring tone for mail messages, videophone calls, and so on, select the corresponding item. Select “Select ring tone”.
Using Manner Mode Setting Keypad Sound OFF Just by pressing a key, you can make a tone from the FOMA terminal such as a ring tone, keypad sound, and alarm sound silence. When you start Manner Mode, not a sound but the vibrator works to notify you of incoming calls or messages. Press and hold -s for at least one second from the Stand-by display. “ ” appears on the Stand-by display. To release Perform the same operation. 1 +m from the Stand-by display ▶Set./Service▶Sound▶Keypad sound 2 Select “OFF”.
■Changing the Display Brightness You can set Backlight to OFF. Then the display dims, and the keys turn off. You can also set the time that elapses before Power Saver Mode activates. Basic Operation 1 2 3 +m from the Stand-by display ▶Set./Service▶Display▶Backlight You can set “View blind” to make it harder for the people around you to see the display from oblique angles. 1 Select “Lighting”▶Select “OFF”. Press and hold -8 for at least one second from the Stand-by display.
■Changing Font Size You can change font sizes at a time. 1 +m from the Stand-by display ▶Set./Service▶Display ▶Font size setting Select “Set at one time”. 3 Select a font size. You can also specify a font size for each function such as “Mail” or “Phonebook”. ■Changing Machi-chara Setting You can change the Machi-chara image which appears to tell you missed calls, new mail messages, new i-concier information and others. 1 +m from the Stand-by display ▶Set.
Changing Illumination Basic Operation You can set the pattern of the illuminations such as for incoming calls and talking at a time. 1 +m from the Stand-by display ▶Set./Service▶Illumination 2 Select “All illum. setting”. 3 Select a pattern. With the FOMA terminal closed, you can check for missed calls, new mail and others. 1 Press .> while the FOMA terminal is closed. You can be notified by the electronic sound and lighting of the Call/Charging indicator.
Switching to the eco Mode With a single key, you can set the eco Mode that reduces battery consumption. 1 “ ” appears on the Stand-by display. To release Perform the same operation. eco Mode Setting You can set the items for reducing battery consumption for when the eco Mode activates. 1. +m from the Stand-by display▶Set./Service ▶Other settings▶Battery/eco mode set. ▶eco mode setting 2. Put a check mark for items to be set. 3. Press +l( ).
Basic Operation ■Terminal Security Code This is a four- to eight-digit number for deleting all files or changing settings. When the display for entering the Terminal Security Code appears, enter your four- to eight-digit code and press +Oo( ). To change 1. +m from the Stand-by display▶Set./Service ▶Lock/Security▶Change security code.
■PUK (PIN Unblock Code) ■PIN1 Code Entry Set You can set the FOMA terminal not to work unless you enter your PIN1 code when turning the power on. 1 +m from the Stand-by display ▶Set./Service▶Lock/Security ▶UIM setting 2 Enter your Terminal Security Code ▶Select “PIN1 code entry set”. 3 Select “ON”▶Enter the PIN1 code.
Omakase Lock When you have lost your FOMA terminal or in other cases, you can lock your personal data (such as Phonebook entries) by contacting DOCOMO. For details on Omakase Lock, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”. Basic Operation ■Setting/Releasing Omakase Lock 0120-524-360 (In Japanese only) Business hours: 24 hours (open all year round) ※Unavailable from some IP phones. You can set/release also from the My docomo site via your personal computer or other devices.
Reset to Default ■Resetting the Function Settings You can reset the items on “Function List”, which are indicated by . (See page 83) might include the functions The items indicated by which do not return to their default settings or state. +m from the Stand-by display ▶Set./Service▶Other settings ▶Reset settings 2 Enter your Terminal Security Code ▶Select “YES”.
■Making a Call from Phonebooks Call Telephone Search a Phonebook entry by the name stored in Phonebook Making a Call/Videophone Call Connect ■Enter a Phone Number to Make a Call 1 From the Stand-by display, enter a phone number starting with a city code. 2 Press -d to make a call. 3 Press -h to end the call. To make a videophone call, press +c( instead of d. 38 Press +Xo from the Stand-by display. 2 Select “Name?”. ) This FOMA terminal has no inward-facing camera.
■Using Redial/Received Calls to Make a Call 1 Press +Vo (Redial) or +Co (Received Calls) from the Stand-by display. 2 Select a call record. 3 Press -d to make a call. You can use WORLD CALL to make an international call from Japan. Contact “docomo Information Center” on the back page of this manual for inquiries about WORLD CALL. When using international carriers other than DOCOMO, contact them.
Connect Receiving a Call/Videophone Call When You cannot Answer a Call 1 A call comes in. ■Activate Record Message 2 Press -d to answer the call. The ring tone sounds and the Call/Charging indicator lights. When a videophone call comes in You can receive the videophone call the same way as with a voice call. The substitute image is sent to the other party. 3 Press -h to end the call. Adjusting Earpiece Volume 40 1 Press .< or .> during a call. 2 Press . to adjust the earpiece volume.
■Using Public Mode (Drive Mode) ■Using Public Mode (Power Off) Once you activate Public mode (Drive mode), the guidance is played back telling that you cannot answer the call as you are currently driving or in a place where you should refrain from speaking on the phone. Then the call is disconnected.
Using Various Network Services Connect ■ services available ■Network The following are the DOCOMO network services available to the FOMA terminal. network services are not available when you are out of the service area or out of reach of radio waves. The details, refer to “Mobile Phone User’s Guide [Network Services]”. For subscriptions and inquiries, contact “docomo Information Center” on the back page of this manual.
■Using Voice Mail Service 1 +m from the Stand-by display ▶Set./Service▶NW services ▶Voice mail Activate the service 1. Select “Activate”▶Select “YES”. You can also specify a ring time. 1 +m from the Stand-by display ▶Set./Service▶NW services ▶Call waiting Activate the service 1. Select “Activate”▶Select “YES”. Answer an Incoming Call during a Call Press -d. Each time you press -d, you can switch the parties you can talk with. ■Using Call Forwarding Service 1 Connect To play back the message 1.
Services Available for FOMA Terminal Connect Available services Directory assistance service (Charges apply: guidance fee + call fee) ※Listed phone numbers only are supported.
Using Overseas Communication Service Voice call※1 Videophone call※1 SMS※2 i-mode※3 i-mode mail i-Channel※3※4 i-concier※5 Packet communication by connecting with a personal computer 3G ○ ○ ○ ○ ○ ○ ○ ○ ○: Available ※1 When using 2in1, you cannot make calls using your B number. When using multiple numbers, you cannot make calls using an additional number. ※2 If the destination is a FOMA terminal, enter the other party’s phone number as you do in Japan. ※3 You need to establish i-mode International Settings.
■Make a Call to Outside the Country You Stay at Connect 1 -0(for at least one second) from the Stand-by display▶Enter numbers in order of country/area code→area code (city code)→destination phone number. Enter “81” as a country/area code when you make an international call to Japan. When the area code (city code) begins with “0”, enter it except for the “0”. However, include “0” when making a call to some countries or regions such as Italy. 2 Press -d to make a call.
Sending Deco-mail You can change the color or size of characters or background color, or insert images or Deco-mail pictograms. 1 +l from the Stand-by display ▶+l( ) You can also select “Template” to create Deco-mail. Enter an address and subject. 3 Select the text field ▶+i( ) ▶Decorate mail ▶Select one of decorations▶Enter text Decorations ▶+Oo( ) 4 Press +l( 5 Select “OK”. ). You can create impressive messages by inserting text or images into a Flash file.
Displaying Received i-mode Mail ■Replying to i-mode Mail +l from the Stand-by display▶Inbox 1 Press +l( is displayed. 2 Select a folder. 2 Enter each item. 3 Select an i-mode mail message. 3 Press +l( 4 Select “OK”. Connect 1 ) while an i-mode mail ). Forward to i-mode Mail 1. +i( ) while an i-mode mail is displayed ▶Reply/forward▶Forward 2. Enter each item. 3. Press +l( ). 4. Select “OK”. When you receive an i-mode mail message, “ ” appears on the Stand-by display.
■Checking New i-mode Mail ■Sorting i-mode Mail You can check the i-mode Center for a new mail message or Message R/F. You can use “Auto-sort” to sort received/sent i-mode mail messages into a folder such as “Business” or “Friend” which has been created in advance. Sorting mail messages, which come from the address stored in the Phonebook, into a folder 1 Press and hold +l for at least one second from the Stand-by display.
Early Warning “Area Mail” Connect ■Receiving Area Mail You can receive information such as about earthquake alerts that are issued from the Japan Meteorological Agency as an Area Mail message. When an Area Mail message arrives, “ ” lights and the buzzer for Area Mail sounds. The received content of some messages is automatically displayed. To erase the displayed content, press +Oo. You can receive Area Mail messages even when you are not contracted to use i-mode.
■Displaying Received SMS Message 1 +l from the Stand-by display▶Inbox 2 Select a folder. 3 Select an SMS message. Phonebook Storing Phonebook Entries ■Storing New Phone Numbers/Mail Addresses You can store Phonebook entries in the FOMA terminal (Phone) or on the UIM. Press and hold +Xo for at least one second from the Stand-by display. 2 Select “Phone”. The display for entering a name appears. Enter a name and proceed. Connect 1 When storing entries onto the Phonebook on the UIM Select “UIM”.
Connect ■Storing Phonebook Entries from Redial/Received Call Records 1 Press +Vo(Redial) or +Co(Received Calls) from the Stand-by display. 2 Highlight a call record and press ) +i( ▶Select “Add to phonebook”. 3 Select “Phone”▶Select “New”. 4 Enter each item. 5 Press +l( 1 2 from the Stand-by display X +o ▶Search and select a Phonebook entry. +m( ) ▶Select an item to be edited ▶Edit the contents. 3 Press +l( 4 Select “YES”. ). Deleting Phonebook Entries ).
i-mode/Full Browser Displaying i-mode Sites 1 Press +i from the Stand-by display. You can access the iMenu. Repeat selecting items (links) to display the desired site. While you are online, “ ” blinks. iMenu is available in English. Select “English” from the display on the right. Search i-mode is a service that enables you, by using the display of the FOMA terminal supporting i-mode (i-mode phone), to use online services such as site access, Internet access, and i-mode mail.
Displaying Websites Designed for PC You can browse Internet websites designed for PCs using the Full Browser function. Note that you are charged a high communication fee for the massive data communication such as browsing Internet websites having many images or downloading data. For details on the packet communication fee, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”. You can browse Internet websites composed of frames. You can select a frame to display it as well.
Viewing and Operating Sites If you save the page once you visited as a screen memo, you can easily refer to it without connecting to i-mode. Operations on site viewing display Scroll display/Move highlighted/ Move the pointer: +Mo Select an item (link): +Oo( 1 ) Return to previous page: +m( Forward to next page: +c( Saving Site Content +i( ) while the site is displayed ▶Screen memo▶Save screen memo ) 2 ) Mute/Release mute: -r(for at least one second) “ ” appears while accessing by Full Browser.
i-Channel ■Accessing i-Channel Search 1 56 This service distributes information such as news and weather forecast to i-Channel mobile phones. The automatically received latest information flows on the Stand-by display by tickers. You can read it on the i-Channel list by pressing the i-Channel key. Further, two types of channels, “Basic channel” provided by DOCOMO and “Okonomi (Optional) channel” provided by IPs (Information Providers) are available.
Camera Viewing and Operating Finder Display Image stabilizer Menu : Auto You can check the settings. Select photo mode : Normal You can also use “Scene” that selects a mode suitable for the scenery around. Camera mode : Digicam mode Number of recordable image Shows the number of remaining recordable still images. Image size setting Top icon : WVGA (480×854) Shows the vertical direction for shooting.
Shooting Still Images/Moving Pictures ■Shooting Still Images (Digicam Mode) You can shoot still images within the sizes from Stand-by (240 x 428) to 5M (1944 x 2592). 1 2 Press +c from the Stand-by display. Press +Oo( ). The still image is automatically saved to the set storage location. Shooting Still Images (Photo Mode) You can shoot still images within the sizes from SubQCIF (128 x 96) to WVGA (480 x 854). 1. +c from the Stand-by display▶+i( ) ▶Camera-mode▶Photo mode 2.
Shooting Still Images Using Various Methods ■Shooting Still Images Using Continuous Mode You can continuously shoot still images within the sizes from Sub-QCIF (96 x 128) to VGA (480 x 640). 1 2 Press +Oo( ). Highlight a still image and press )▶+Oo( ) +c( You can save all the shot images by pressing ). +l( The camera automatically shoots identifying the number of faces and the distance between faces by face recognition.
1Seg Enjoy Using 1Seg 60 ■Using 1Seg 1Seg is a service provided by television entrepreneurs (broadcasting stations). You are not charged a communication fee for receiving video and audio. For about fee charged by NHK, contact NHK. ※You are charged a packet communication fee for browsing “Data broadcasting site” and “i-mode site”. You might be charged an information fee for using some sites (i-mode pay sites).
Setting Channels When you activate 1Seg for the first time or change the area you are in, you need to operate “Channel setting”. Select “Auto channel setting” to enable you to search automatically for broadcast stations you can watch. You need to set this function when you are in the terrestrial digital TV broadcasting service area. +m from the Stand-by display▶1Seg ▶Channel setting ▶Auto channel setting 2 Select “YES”. 3 Select “YES”▶Enter a title. To execute Channel Setting by selecting an area 1.
Viewing and Operating Viewer Display Video Caption Data Broadcasting Operation Mode : Video Mode Enjoy : Data Broadcasting Mode Channel (Remote-control number) When a broadcasting station is broadcasting multiple services (programs), “Viewing service number/Number of all services” is also displayed.
Music Music&Video Channel 1 +m from the Stand-by display▶MUSIC ▶Music&Video Channel▶Set program 2 Follow the instructions on the display to set a program. The program automatically downloads at night. Playing Program 1 +m from the Stand-by display▶MUSIC ▶Music&Video Channel 2 Select a program.
Downloading Chaku-uta Full® Music Files You can download Chaku-uta Full® music files from sites. 1 Select a Chaku-uta Full® music file at a downloadable site. 2 Select “Save”▶Select “YES”. 3 Select a destination folder. Playing Music Files MUSIC Player enables you to play Chaku-uta Full® music files you have downloaded from sites, or to play Windows Media Audio (WMA) files you saved on the microSD card using your personal computer.
i-αppli “i-αppli” is a software program for i-mode mobile phones. By downloading various software programs from the i-mode site, you can use your FOMA terminal more conveniently. You can automatically update the stock price information or weather information, and enjoy games without accessing network. You are charged separately a packet communication fee for downloading i-αppli programs. For details on i-αppli, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.
i-motion/Movie Enjoy i-motion is a file consisting from video, audio, and music which you can download to your FOMA terminal from i-motion sites that support i-motion. You can also set it for a ring tone. Also, by using high speed communication, you can play back smooth and high-quality movie files provided by portal sites, movie specialty sites and other sites on the Internet. When downloading or streaming an i-motion/movie file, you might receive a bulky file.
i-concier 1 When information arrives, blinks and the content is displayed on the Standby display. 2 Select a message. Displaying i-concier Screen 1 +m from the Stand-by display ▶i-concier 2 Select a piece of information. More Convenient “i-concier” works to serve you with a pleasant life just like a clerk or concierge does. The service holds your data (area information about your neighborhood, Schedule, ToruCa, Phonebook, etc.
Convenient Tools 1 Using Schedule 1 +m from the Stand-by display▶Stationery ▶Schedule More Convenient Select a date to show a schedule event of the selected date. Select the schedule event to confirm its details. 68 +m from the Stand-by display ▶Stationery▶Alarm 2 Highlight an alarm and press ). +l( 3 Enter each item. 4 Press +l( )▶Select “New”. 2 +i( 3 Enter each item. 4 Using Alarm You can store a new schedule event. Press +l( ). ).
Using Bar Code Reader You can use the camera to scan QR codes and others, and store them as files. From the scanned data, you can make calls, compose i-mode mail messages, access Internet websites, and so on. ■QR code QR code is one of the 2-dimensional codes that denotes data in the vertical and horizontal directions. “株式会社NTTドコモ (NTT DOCOMO, INC.)” is displayed when you scan the QR code with the FOMA terminal.
Data Management More Convenient Using microSD Card 70 If you do not have a microSD card, you need to purchase it. P-07B supports a commercial microSD card of up to 2 Gbytes and microSDHC card of up to 16 Gbytes (As of July 2010). For the latest operation check information such as the memory capacity and manufacturers of microSD cards, access the following sites (in Japanese only). Note that the microSD cards other than published in the sites might not correctly work.
Icons on the Display : A microSD card is inserted. : Data is being read/written. (Do not remove the microSD card nor turn off the FOMA terminal.) : The microSD card is write-protected. When you use the microSD card for the first time, you need to format (initialize) it. Be sure to use P-07B for formatting. The microSD card formatted using other devices such as personal computers may not work properly. Note that formatting deletes all content on the microSD card.
■Copying Data to the microSD Card ■Displaying Data Stored on the microSD Card Copying a still image 1 More Convenient 2 1 Highlight a still image to be copied and press +i( ) ▶Select “Copy to microSD” ▶Select “Copy this”. ■Copying Data to the FOMA Terminal Copying a still image 1 +m from the Stand-by display ▶Data box▶My picture▶+m( ) ▶Select a folder. 2 72 Displaying still image +m from the Stand-by display ▶Data box▶My picture ▶Select a folder.
■Back up Data to the microSD Card 1 +m from the Stand-by display▶LifeKit ▶microSD▶Backup/Restore ▶Backup to microSD 2 Enter your Terminal Security Code ▶Select “YES”. To restore backup data to FOMA terminal 1. +m from the Stand-by display▶LifeKit▶microSD ▶Backup/Restore▶Restore to phone 2. Enter your Terminal Security Code▶Select “YES”.
■Sending Data You need to set the receiving end terminal first, and then start sending data within 30 seconds. 1 Function menu of the data to be sent ▶Select “Send Ir data”. Procedure for sending data might differ depending on the data. More Convenient 2 74 Select “YES”. ■Receiving Data 1 +m from the Stand-by display▶LifeKit ▶Receive Ir data▶Receive 2 Select “YES”.
Support Troubleshooting First of all, check to see if you need to update the software program and then update it if necessary. See page 79 for how to update software programs. When symptom persists even after you check the countermeasures for the problem you suffer, contact the “Repairs” counter listed on the back page of this manual or a repair counter specified by DOCOMO. The “Repairs” counter is available in Japanese only. Power source The FOMA terminal does not turn on.
The usable time of the battery is short. …Make sure not to leave the FOMA terminal out-of-service-area for a long time. If your FOMA terminal is left out-of-service area, it searches for radio waves to establish communications, consuming more power. …The usable time of the battery pack varies depending on the usage environment or its remaining life. …Battery packs are consumables. The usable time slightly shortens each time you charge the battery.
Warranty and After-sales Service ■Warranty sure that you have received a warranty card provided at Make purchase. After checking the contents of the warranty card as well as “Shop name and date of purchase”, keep the warranty card in a safe place. If you notice that necessary items of the warranty card are not filled in, immediately contact the shop where you purchased the FOMA terminal from. The term of the warranty is one year from the date of purchase.
Others information such as about function settings and Total The Calls Duration, etc. might be reset depending on the troubles or repairs, or the way you handle the FOMA terminal. Set the settings again. parts generating magnetism are used in the following The portions of the FOMA terminal. Note that if you place a magnetism-sensitive object such as a cash card near the FOMA terminal, the card might become unusable.
Updating Software Others This function is for updating software programs in the FOMA terminal by using packet communication if necessary. ※A packet communication fee for updating software programs is free. The DOCOMO website and “お客様サポート (User support)” in JapaneseiMenu lets you know information about updating software programs. There are three methods for updating software programs; “Auto-update”, “Update Now” and “Reserve Update”.
■Start Software Update from Icon 1 Select “Update notification icon” on the Stand-by display. ■Start Software Update from Menu 1 +m from the Stand-by display ▶Set./Service▶Other settings ▶Software update 2 Enter your Terminal Security Code ▶Select “Update”. 3 Go to step 2 of “Start Software Update from Icon” on page 80. Update notification icon Check whether you need to update software programs. Others 2 80 When update is necessary, “Update is needed” is displayed.
Check Harmful Data About scanning function You can detect data or application programs, which might cause troubles, from among those downloaded to your FOMA terminal, and then can delete the data or stop starting the application programs. scan function provides a certain protective measure to filter out data that might cause troubles with your FOMA terminal at the time This when you browse websites or receive messages.
Introduction of Options and Related Devices Combining various options with the FOMA terminal, you can realize more versatile use from personal purpose to business purposes. Some products may not be dealt in depending on the area. For details, consult a handling counter such as a docomo Shop. For details on options, refer to the user’s manuals of respective options and related devices.
Mail Appendix Function List Mail settings SMS settings Area Mail settings iMenu Search Bookmark Screen memo i-mode Browser Full Browser Last URL Enter URL i-Channel Channel list Ticker ON/OFF Ticker font size set. Ticker color set.
Set./Service i-mode i-mode settings i-mode Browser set. Full Browser set. Common settings Check settings Reset i-mode setting Sound i-αppli Full Browser Home Software list (phone) iαppli (microSD) iαppli info Others iαppli settings 84 Software list iαppli data End stand-by info Security error history Auto start info Trace info Auto start setting Disp.
Kisekae i-concier Lock/Security Call time/cost Incoming call Information disp. set. Self mode Lock all Personal data lock Secret mode (+m40) Secret data only (+m41) Secret recv. call Keypad dial lock Reject unknown Call setting w/o ID (+m10) Change security code (+m29) UIM setting Scanning function Lock setting Call data (+m61) Reset total cost&dura.
Others Other settings 86 Data box Set./Service NW services 2in1 setting Multi number Arrival call act Set in-call arrival act Remote access Dual network English guidance Overseas NW search Overseas setting Overseas service Additional service Contact DOCOMO OFFICEED Chaku-moji Side keys guard long press set. Character input method (+m35) Battery/eco mode set. Pause dial (+m84) Sub-address setting Headset mic.
Receive Ir data (+m79) microSD ToruCa Rec. msg/voice memo (+m55) Scan code Saved data Receive Receive all Refer microSD data Backup/Restore ToruCa folders Settings Play/Erase msg. Play/Erase VP msg. Record message setting Voice memo Voice announce Voice recorder Check/How to update Exchanging history Data Security PB image sending Service Backup PB etc./update Backup set./update Backup images FOMA Environment Check Guide Add to phonebook Search phonebook UIM operation Dialed/recv.
Activate 1Seg Program guide TV timer list Timer recording list Recording result TVlink Channel list Others Channel setting 88 1Seg Music&Video Channel User settings Select area Auto channel setting Display/operation Video Display light Sound effect Recording Data broadcasting 1Seg eco mode Camera MUSIC MUSIC Player 1Seg Phrase/own dict.
Specific Absorption Rate (SAR) of Mobile Phone ■SAR Certification Information * ** Ministry of Internal Affairs and Communications The technical regulation is provided in Article 14-2 of the Ministry Ordinance Regulating Radio Equipment. *** International Commission on Non-Ionizing Radiation Protection ■European RF Exposure Information This mobile phone complies with the EU requirements for exposure to radio waves.
■Declaration of Conformity The product “P-07B” is declared to conform with the essential requirements of European Union Directive 1999/5/EC Radio and Telecommunications Terminal Equipment Directive 3.1(a), 3.1(b) and 3.2. The Declaration of Conformity can be found on http://panasonic.net/pmc/support/index.html. ※The European RTTE approval of this product is limited to the use of the P-07B handset, Battery Pack and FOMA AC Adapter for Global use (100 to 240 V AC) only.
■Important Safety Information Export Administration Regulations This product and its accessories might be covered by the Japan Export Administration Regulations (“Foreign Exchange and Foreign Trade Law” and its related laws). To export this product and its accessories, take the required measures on your responsibility and at your expenses. For details on the procedures, contact the Ministry of Economy, Trade and Industry.
Intellectual Property Right ■Copyrights and Portrait Rights You have no right to copy, modify, or distribute the contents such as text, images, music, or software programs downloaded from websites on the Internet, or images shot by the cameras of this product without permission from the copyright holder except for when the copy or quote is for personal use that is allowed by the copyright law. Note that it may be prohibited to shoot or record live performances or exhibitions even for personal use.
Content providers are using the digital rights management technology for Windows Media contained in this device (“WM-DRM”) to protect the integrity of their content (“Secure Content”) so that their intellectual property, including copyright, in such content is not misappropriated. This device uses WM-DRM Software to play Secure Content (“WM-DRM Software”).
Access the following for checking or changing the contents of your contract, or for applying to respective services, and asking for related documents: From i-mode From PC ｉMenu ▶ お客様サポート (User support) ▶ お申込・お手続き (Applications/Procedures) Packet communication charges free ▶ 各種お申込・お手続き (Respective applications/procedures) My docomo (http://www.mydocomo.com/) ▶ 各種お申込・お手続き (Respective applications/procedures) (User support)” and My docomo are available in Japanese only.
General Inquiries Repairs (Business hours: 9:00 a.m. to 9:00 p.m.) (Business hours: 24 hours (open all year round)) 0120-005-250 (toll free) * Service available in English, Portuguese, Chinese, Spanish, and Korean. * Unavailable from part of IP phones. (Business hours: 9:00 a.m. to 8:00 p.m.
