PAN1782 Bluetooth® Low Energy Module Product Specification Rev. 1.
PAN1782 Bluetooth Module Overview The PAN1782 is a Bluetooth 5 Low Energy (LE) module based on the Nordic nRF52833 single chip controller. 15.6 mm × 8.
PAN1782 Bluetooth Module By purchase of any of the products described in this document the customer accepts the document's validity and declares their agreement and understanding of its contents and recommendations. Panasonic Industrial Devices Europe GmbH (Panasonic) reserves the right to make changes as required at any time without notification. Please consult the most recently issued Product Specification before initiating or completing a design. © Panasonic Industrial Devices Europe GmbH 2022.
PAN1782 Bluetooth Module Product Change Notifications (PCNs) and Information Notes (INs) Please consider the following PCNs/INs and take suitable countermeasures where necessary and appropriate; for further details please contact your local Panasonic Sales office ( 7.2.1 Contact Us): • • • Nordic APPROTECT vulnerability problem description: IN133 Informational Notice v1.0 Nordic APPROTECT solution description: IN149 Informational Notice v1.
PAN1782 Bluetooth Module Table of Contents 1 2 3 4 5 6 About This Document......................................................................................................................... 7 1.1 Purpose and Audience .............................................................................................................. 7 1.2 Revision History ......................................................................................................................... 7 1.
PAN1782 Bluetooth Module 7 Appendix ........................................................................................................................................... 41 7.1 Ordering Information ................................................................................................................ 41 7.2 Contact Details ........................................................................................................................ 42 Product Specification Rev. 1.
PAN1782 Bluetooth Module 1 About This Document 1 About This Document 1.1 Purpose and Audience This Product Specification provides details on the functional, operational, and electrical characteristics of the Panasonic PAN1782 module. It is intended for hardware design, application, and Original Equipment Manufacturers (OEM) engineers. The product is referred to as “PAN1782” and “module” within this document. 1.2 1.3 Revision History Revision Date Modifications/Remarks 1.
PAN1782 Bluetooth Module 2 Overview 2 Overview The PAN1782 is a Bluetooth 5 Low Energy (LE) module based on the Nordic nRF52833 single chip controller. The Bluetooth 5 features additionally a higher symbol rate of 2 Mbps using the high speed LE 2M PHY or a significantly longer range using the LE coded PHY at 500 kb/s or 125 kb/s. The new channel selection algorithm (CSA#2) improves the performance in high interference environments.
PAN1782 Bluetooth Module 2.1 2 Overview Block Diagram PAN1782 â Bluetooth Low Energy 5 Module 1.7 V to 3.6 V 2.5 V to 5.5 V Reset Nordic nRF52833 DC-DC Conversion GPIOs UART SPI I²C Flash 512 kB Crystal 32.768 kHz RAM 128 kB Crystal 32 MHz Chip Antenna COMP/ADC QDEC USB 2.0 Device SWD Product Specification Rev. 1.
PAN1782 Bluetooth Module 2.2 2 Overview Pin Configuration Pin Assignment Top View F1 F2 F3 F4 F5 F6 F7 F8 F9 E1 E2 E3 E4 E5 E6 E7 E8 E9 D1 D2 D3 D4 D5 D6 D7 D8 D9 C1 C2 C3 C4 C5 C6 C7 C8 C9 B1 B2 B3 B4 B5 B6 B7 B8 B9 A1 A2 A3 A4 A5 A6 A7 A8 A9 F10 F11 F12 A11 A12 Pin Functions No. Pin Name Pin Type Description A1 GND Ground Connect to ground A2 P0.30/AIN6 Digital BI/Analog Input GPIO/Analogue signal to ADC/COMP A3 P0.
PAN1782 Bluetooth Module 2 Overview No. Pin Name Pin Type Description B3 NC NC Do not connect B4 NC NC Do not connect B5 P0.28/AIN4 UART_RTS Digital BI GPIO or UART_RTS or Analogue signal to ADC/COM B6 P0.11 UART_CTS Digital BI GPIO or UART_CTS B7 NC NC Do not connect B8 NC NC Do not connect B9 NC NC Do not connect C1 NC NC Do not connect C2 NC NC Do not connect C3 P0.
PAN1782 Bluetooth Module 2.3 2 Overview No. Pin Name Pin Type Description E6 P0.03/AIN1 UART_RXD Digital BI GPIO or UART_RXD or Analogue signal to ADC/COM E7 NC NC Do not connect E8 GND Ground Connect to ground E9 GND Ground Connect to ground F1 GND Ground Connect to ground F2 NC NC Do not connect F3 DP Digital BI USB differential line with polarity + F4 DM Digital BI USB differential line with polarity - F5 P0.
PAN1782 Bluetooth Module 2.4 2 Overview Bluetooth Features • • • Bluetooth 5 LE Supports Bluetooth 5 LE high speed and long range modes AOA and AOD direction finding Product Specification Rev. 1.
PAN1782 Bluetooth Module 3 Detailed Description 3 Detailed Description 3.1 Dimensions The dimensions are in millimeters. 8.70 1.20 2.00 Top View 15.60 Item Dimension Tolerance Remark Width 8.70 ±0.30 Length 15.60 ±0.30 Height 2.00 Product Specification Rev. 1.0 ±0.
PAN1782 Bluetooth Module 3.2 3 Detailed Description Footprint Top View F3 F4 F5 F6 F7 F8 F9 E1 E2 E3 E4 E5 E6 E7 E8 E9 D1 D2 D3 D4 D5 D6 D7 D8 D9 C1 C2 C3 C4 C5 C6 C7 C8 C9 B1 B2 B3 B4 B5 B6 B7 B8 B9 A1 A2 A3 A4 A5 A6 A7 A8 A9 F10 F11 F12 A11 A12 1.85 F2 1.20 5.00 F1 1.35 8.70 1.35 3.00 1.00 1.20 0.60 2.40 5.00 15.60 Product Specification Rev. 1.
PAN1782 Bluetooth Module 3.3 3 Detailed Description Packaging The module is a mass production status product and will be delivered in the package described below. 3.3.1 Tape Dimensions 3.3.2 Packing in Tape Direction of unreeling (for customer) trailer (empty) 1 x circumference / hub (min 160mm) component packed area standard 1500pcs leader (empty) minimum 10 pitch Top cover tape more than 1 x circumference plus 100mm to avoid fixing of tape end on sealed modules.
PAN1782 Bluetooth Module 3.3.3 3 Detailed Description Component Direction Pin 1 Marking (Top Side) Direction of unreeling (for customer) 3.3.4 Reel Dimension Product Specification Rev. 1.
PAN1782 Bluetooth Module 3.3.5 3 Detailed Description Package Label Example: 3.3.6 (1T) Lot code (1P) Customer order number, if applicable (2P) Order number (9D) Date code (Q) Quantity (HW/SW) Hardware/software version Total Package Product Specification Rev. 1.
PAN1782 Bluetooth Module 3.4 3 Detailed Description Case Marking Example: 1 Brand name 2 Hardware/software version 3 Order number 4 Lot code 5 Status: ES or empty for MP 6 2D barcode, for internal usage only 7 Marking for Pin 1 8 Bluetooth logo Product Specification Rev. 1.
PAN1782 Bluetooth Module 4 Specification 4 Specification All specifications are over temperature and process, unless indicated otherwise. 4.1 Default Test Conditions Temperature: Humidity: Supply Voltage: 4.2 25 °C ± 10 °C 40 % to 85 % RH 3.3 V Absolute Maximum Ratings The maximum ratings may not be exceeded under any circumstances, not even momentarily or individually, as permanent damage to the module may result. Symbol Parameter VDD Normal Supply Voltage -0.3 3.
PAN1782 Bluetooth Module 4.3 4 Specification Recommended Operating Conditions The maximum ratings may not be exceeded under any circumstances, not even momentarily or individually, as permanent damage to the module may result. Symbol Parameter VDD (LV Mode) Supply Voltage tR_ VDD Supply Rise Time 0 V to 1.7 V VDD-POR Supply Voltage Power on Reset active VDDH (HV Mode) Supply Voltage VDDH (optional) tR_VDDH Supply Rise Time 0 V to 3.
PAN1782 Bluetooth Module 4.5 4 Specification Parameter Condition Min. Typ. Max. Unit Tx Current 8 dBm Tx only, DC/DC ON 14.2 mA 4 dBm Tx only, DC/DC ON 9.6 mA 0 dBm Tx only, DC/DC ON 4.9 mA -4 dBm Tx only, DC/DC ON 3.8 mA -8 dBm Tx only, DC/DC ON 3.4 mA -12 dBm Tx only, DC/DC ON 3.1 mA -16 dBm Tx only, DC/DC ON 2.9 mA -20 dBm Tx only, DC/DC ON 2.7 mA -40 dBm Tx only, DC/DC ON 2.
PAN1782 Bluetooth Module 4 Specification Locking the Device Debug Port and enabling the Access Port Protection Once the access port protection is enabled, no further access including debugging can be done anymore! To ensure that the device debug port is locked during production programming and the access port protection is enabled correctly, the following steps must be followed. 1. Use the Microcontroller Development Kit (MDK) nRF MDK (version 8.40.2) or later for application development.
PAN1782 Bluetooth Module 4.7 4 Specification Antenna Placement Recommendation Antenna “Keep out Area” Do not place any ground plane under the marked restricted antenna area in any layer! This would be affecting the performance of the chip antenna in a critical manner. Impact of Placement on the Antenna Radiation Pattern The placement of the module, surrounding material, and customer components has an impact on the radiation pattern of the antenna.
PAN1782 Bluetooth Module 4 Specification Antenna Placement Recommendation All dimensions are in millimeters. Use a ground plane in the area surrounding the module wherever possible. Use stitching vias to GND left and right from the Keep-Out-Area and on the PCB edges It is recommended to place the module: • At the PCB edge (horizontal) of mother PCB with the module antenna at the PCB edge • GND plane on the left and right of the module Top View 8.70 Min. 15.00 Min. 15.00 3.00 5.
PAN1782 Bluetooth Module 4.8 4 Specification Reliability Tests The measurement should be done after the test module has been exposed to room temperature and humidity for one hour. No. Item Limit Condition 1 Variable Vibration Test Electrical parameters should be Freq.: 20 Hz~2 000 Hz, Acc.
PAN1782 Bluetooth Module 4.9 4 Specification Recommended Soldering Profile • • • • • Reflow permissible cycles: 2 Opposite side reflow is prohibited due to module weight More than 75 percent of the soldering area shall be coated by solder The soldering profiles should be adhered to in order to prevent electrical or mechanical damage Soldering profile assumes lead-free soldering Product Specification Rev. 1.
PAN1782 Bluetooth Module 5 Cautions 5 Cautions Failure to follow the guidelines set forth in this document may result in degrading of the module functions and damage to the module. 5.1 Design Notes 1. Follow the conditions written in this specification, especially the control signals of this module. 2. The supply voltage should abide by the maximum ratings ( 4.2 Absolute Maximum Ratings). 3.
PAN1782 Bluetooth Module 5.3 5 Cautions Usage Condition Notes 1. Take measures to protect the module against static electricity. If pulses or transient loads (a large load, which is suddenly applied) are applied to the modules, check and evaluate their operation before assembly of the final products. 2. Do not use dropped modules. 3. Do not touch, damage, or soil the pins. 4. Follow the recommended condition ratings about the power supply applied to this module. 5.
PAN1782 Bluetooth Module 5 Cautions 1. Ensure the safety of the whole system by installing a protection circuit and a protection device. 2. Ensure the safety of the whole system by installing a redundant circuit or another system to prevent a single fault causing an unsafe status. 5.6 Other Cautions 1. Do not use the module for other purposes than those listed in section 5.3 Usage Condition Notes. 2.
PAN1782 Bluetooth Module 5.7 5.7.
PAN1782 Bluetooth Module 6 Regulatory and Certification Information 6 Regulatory and Certification Information 6.
PAN1782 Bluetooth Module 6.2 6.2.1 6 Regulatory and Certification Information Federal Communications Commission (FCC) for US FCC Notice The PAN1782 including the antennas, which are listed in 6.2.5 Approved Antenna List, complies with Part 15 of the FCC Rules. The device meets the requirements for modular transmitter approval as detailed in FCC public Notice DA00-1407. The transmitter operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2.
PAN1782 Bluetooth Module 6.2.3 6 Regulatory and Certification Information Label Requirements The OEM must ensure that FCC labelling requirements are met. This includes a clearly visible label on the outside of the OEM enclosure specifying the appropriate Panasonic FCC identifier for this product as well as the FCC Notice above. The FCC identifier is FCC ID: T7V1782 This FCC identifier is valid for the PAN1782.
PAN1782 Bluetooth Module 6.2.6 6 Regulatory and Certification Information RF Exposure To comply with FCC RF Exposure requirements, the OEM must ensure that only antennas from the Approved Antenna List are installed 6.2.5 Approved Antenna List. The preceding statement must be included as a “CAUTION” statement in manuals for products operating with the approved antennas in the previous table to alert users on FCC RF Exposure compliance.
PAN1782 Bluetooth Module 6 Regulatory and Certification Information The end customer has to assure that the device has a distance of more than 15 mm from the human body under all circumstances. If the end customer application intends to use the PAN1782 in a distance smaller 15 mm from the human body, SAR evaluation has to be repeated by the OEM. The end customer equipment must meet the actual Safety/Health requirements according to ISED.
PAN1782 Bluetooth Module 6.3.1 6 Regulatory and Certification Information IC Notice English The device PAN1782 ( 7.1 Ordering Information), including the antennas ( 6.2.5 Approved Antenna List), complies with Canada RSS-GEN Rules. The device meets the requirements for modular transmitter approval as detailed in RSS-Gen. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2.
PAN1782 Bluetooth Module 6 Regulatory and Certification Information French Obligations d’étiquetage Les fabricants d’équipements d’origine (FEO) – en anglais Original Equipment Manufacturer (OEM) – doivent s’assurer que les obligations d’étiquetage IC du produit final sont remplies. Ces obligations incluent une étiquette clairement visible à l’extérieur de l’emballage externe, comportant l’identifiant IC du module Panasonic inclus, ainsi que la notification ci-dessus.
PAN1782 Bluetooth Module 6 Regulatory and Certification Information The requirements for CE marking are described in regulation (EC) No. 765/2008 Annex II. The end customer has to assure that the device has a distance of more than 5 mm from the human body under all circumstances. If the end customer application intends to use the PAN1782 in a distance smaller 5 mm from the human body, SAR evaluation has to be repeated by the OEM.
PAN1782 Bluetooth Module 6 Regulatory and Certification Information Restrictions or Requirements in the UK The end customer has to assure that the device has a distance of more than 5 mm from the human body under all circumstances. If the end customer application intends to use the PAN1782 in a distance smaller 5 mm from the human body, SAR evaluation has to be repeated by the OEM. The end customer equipment must meet the actual Safety/Health requirements according to SI 2017/1206.
PAN1782 Bluetooth Module 7 Appendix 7 Appendix 7.1 Ordering Information Variants and Versions Order Number Brand Name Description ENW89858A1KF2 PAN1782 Bluetooth Low Energy Module with Antenna MOQ1 1 500 Access Port Protection APPROTECT HW Empty Flash 1 Abbreviation for Minimum Order Quantity (MOQ). The default MOQ for mass production is 1 500 pieces, fewer only on customer demand. Samples for evaluation can be delivered at any quantity via the distribution channels.
PAN1782 Bluetooth Module 7.2 7.2.1 7 Appendix Contact Details Contact Us Please contact your local Panasonic Sales office for details on additional product options and services: For Panasonic Sales assistance in the EU, visit https://eu.industrial.panasonic.com/about-us/contact-us Email: wireless@eu.panasonic.com For Panasonic Sales assistance in North America, visit the Panasonic website “Sales & Support” to find assistance near you at https://na.industrial.panasonic.