PAN1781 Bluetooth® Low Energy Module Module Integration Guide Rev. 0.
PAN1781 Bluetooth Module Overview The PAN1781 is a Bluetooth 5 Low Energy (LE) module based on the Nordic nRF52820 single chip controller. Features • Surface mount type dimensions: 15.6 mm × 8.
PAN1781 Bluetooth Module By purchase of any of the products described in this document the customer accepts the document's validity and declares their agreement and understanding of its contents and recommendations. Panasonic Industrial Devices Europe GmbH (Panasonic) reserves the right to make changes as required at any time without notification. Please consult the most recently issued Module Integration Guide before initiating or completing a design. © Panasonic Industrial Devices Europe GmbH 2021.
PAN1781 Bluetooth Module The third-party tools mentioned in this document are offered by independent third-party providers who are solely responsible for these products. Panasonic has no responsibility whatsoever for the performance, product descriptions, specifications, referenced content, or any and all claims or representations of these third-party providers.
PAN1781 Bluetooth Module Table of Contents 1 About This Document.........................................................................................................................6 1.1 Purpose and Audience .................................................................................................. 6 1.2 Revision History ............................................................................................................. 6 1.3 Use of Symbols ......................................
PAN1781 Bluetooth Module 1 About This Document 1 About This Document 1.1 Purpose and Audience This Module Integration Guide is intended to support the easy integration of the PAN1781 into a product and to ensure the compliance with regulatory requirements. This guide gives an overview about the hardware design requirements by providing a reference design, which is the evaluation board of the PAN1781.
PAN1781 Bluetooth Module Symbol 1 About This Document Description ➔ Result Indicates the result of a task or the result of a series of tasks. This font GUI text Indicates fixed terms and text of the graphical user interface. Example: Click Save. Menu > Menu item Path Indicates a path, e.g. to access a dialog. Example: In the menu, select File > Setup page.
PAN1781 Bluetooth Module 2 Overview 2 Overview The PAN1781 is a Bluetooth 5 Low Energy (LE) module based on the Nordic nRF52820 single chip controller. The Bluetooth 5 features additionally a higher symbol rate of 2 Mbps using the high speed LE 2M PHY or a significantly longer range using the LE coded PHY at 500 kb/s or 125 kb/s. The new channel selection algorithm (CSA#2) improves the performance in high interference environments.
PAN1781 Bluetooth Module 3 PAN1781 Module 3 PAN1781 Module 3.1 Block Diagram Module Integration Guide Rev. 0.
PAN1781 Bluetooth Module 3.2 3 PAN1781 Module Footprint The outer dimensions have a tolerance of ±0.3 mm. Top View Module Integration Guide Rev. 0.
PAN1781 Bluetooth Module 3.3 3 PAN1781 Module Placement Antenna “Keep out Area” Do not place any ground plane under the marked restricted antenna area in any layer! This would be affecting the performance of the chip antenna in a critical manner. Impact of Placement on the Antenna Radiation Pattern The placement of the module, surrounding material, and customer components has an impact on the radiation pattern of the antenna. The recommendation for the ground plane is based on a FR4 4-Layer PCB.
PAN1781 Bluetooth Module 3 PAN1781 Module All dimensions are in millimeters. Use a ground plane in the area surrounding the module wherever possible. It is recommended to place the module: • In the center (horizontal) of mother PCB. • At the edge (horizontal) of mother PCB. Antenna Placement Recommendation 8.70 Min. 15.00 Min. 15.00 3.00 5.00 Keep out Area Min. 40.00 15.60 Top View Module Integration Guide Rev. 0.
PAN1781 Bluetooth Module 4 Regulatory and Certification Information 4 Regulatory and Certification Information 4.1 General Certification Information Regulatory certifications are valid for the following radio relevant software: • • Nordic Soft Devices S112, S113 or S140 Bluetooth Specification 5 For further certification requests for other radio software please contact Panasonic 6 Contact Details. Module Integration Guide Rev. 0.
PAN1781 Bluetooth Module 4.2 4.2.1 4 Regulatory and Certification Information Federal Communications Commission (FCC) for US FCC Statement The following FCC statement has to be printed in the OEM end product user information: The device meets the requirements for modular transmitter approval as detailed in FCC public Notice DA00-1407. The transmitter operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2.
PAN1781 Bluetooth Module 4.2.3 4 Regulatory and Certification Information Label Requirements The following labelling requirements have to be implemented on the OEM end product: The OEM must ensure that FCC labelling requirements are met. This includes a clearly visible label on the outside of the OEM enclosure specifying the appropriate Panasonic FCC identifier for this product as well as the FCC notice above. The FCC identifier is FCC ID: T7V1781. This FCC identifier is valid for the PAN1781.
PAN1781 Bluetooth Module 4.2.6 4 Regulatory and Certification Information RF Exposure To comply with FCC RF Exposure requirements, the OEM must ensure that only antennas from the Approved Antenna List are installed 4.2.5 Approved Antenna List. The preceding statement must be included as a “CAUTION” statement in manuals for products operating with the approved antennas to alert users on FCC RF Exposure compliance.
PAN1781 Bluetooth Module 4.3 4 Regulatory and Certification Information Innovation, Science, and Economic Development (ISED) for Canada The following IC rules have to be followed by end product OEM’s: English The PAN1781 is licensed to meet the regulatory requirements of ISED.
PAN1781 Bluetooth Module 4 Regulatory and Certification Information French PAN1781 est garanti conforme aux dispositions règlementaires d’Industry Canada (ISED).
PAN1781 Bluetooth Module 4.3.1 4 Regulatory and Certification Information IC Notice The following IC notice has to be printed in English and French in the OEM end product user information: English The device PAN1781, including the integrated antenna mentioned in 4.2.5 Approved Antenna List, complies with Canada RSS-GEN Rules. The device meets the requirements for modular transmitter approval as detailed in RSS-Gen.
PAN1781 Bluetooth Module 4.3.2 4 Regulatory and Certification Information Labeling Requirements The following IC labelling requirements have to be followed by end product OEM’s: English Labeling Requirements The OEM must ensure that IC labelling requirements are met. This includes a clearly visible label on the outside of the OEM enclosure specifying the appropriate Panasonic IC identifier for this product as well as the IC Notice above.
PAN1781 Bluetooth Module 4.4 4 Regulatory and Certification Information European Conformity According to RED (2014/53/EU) All modules described in this Module Integration Guide comply with the standards according to the following LVD (2014/35/EU), EMC-D (2014/30/EU) together with RED (2014/53/EU) articles. Standards • • • Due to the model size, the CE marking is displayed in the installation instruction and on the package label only. It cannot be displayed according to regulation (EU) No.
PAN1781 Bluetooth Module 4.5 4 Regulatory and Certification Information Bluetooth For Bluetooth end products which integrate the PAN1781 the OEM needs to apply for an own end product listing (EPL) at the Bluetooth SIG. If the PAN1781 is used on more than one OEM product, costs can be saved by applying for a family EPL.
PAN1781 Bluetooth Module 5 Restricted Use 5 Restricted Use 5.
PAN1781 Bluetooth Module 6 Contact Details 6 Contact Details 6.1 Contact Us Please contact your local Panasonic Sales office for details on additional product options and services: For Panasonic Sales assistance in the EU, visit https://eu.industrial.panasonic.com/about-us/contact-us Email: wireless@eu.panasonic.com For Panasonic Sales assistance in North America, visit the Panasonic website “Sales & Support” to find assistance near you at https://na.industrial.panasonic.
