CD-ROM DRIVE UNIT CR-594-B / CR-594-C INSTRUCTION MANUAL Please read through these instructions before operating this unit.
ENGLISH CD-ROM DRIVE UNIT CR-594-B / CR-594-C INSTRUCTION MANUAL Please read through these instructions before operating this unit. Interface : ATAPI * Model CR-594-B TABLE OF CONTENTS IMPORTANT SAFETY NOTICE 1. PRECAUTIONS WHEN OPERATING ................................................................... A-3 1.1 PRECAUTIONS WHEN TRANSPORTING ...................................................... A-3 1.2 INSTALLATION LOCATION ............................................................................
IMPORTANT SAFETY NOTICE NOTICE (1) You may not reproduce or transcribe any part of this publication without permission. (2) We reserve the right to revise this document at any time without notice. (3) If you have any questions about this document, contact your sales representative. SAFETY NOTICE (1) To prevent fire or electric shock, do not expose this appliance to rain or moisture. (2) To avoid electric shock or damage to the eyes due to laser beam, do not attempt to disassemble the cabinet.
Class 1 LASER Product This equipment is certified to comply with DHHS Rule 21 CFR Chapter 1,Subchapter J in effect as of date of manufacture. Elsewhere, the drive is certified to conform to the requirements of the International Electrotechnical Commission (IEC) 825 and CENELEC EN60825 for Class 1 laser products. Class 1 laser products are not considered to be hazardous. To ensure continued product safety, the following precautions should be heeded.
For Finnish VAROITUS! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle. For Swedish VARNING! Om apparaten används på annat sätt än i denna bruksanvisning specificerats, kan användaren utsättas för osynlig laserstrålning, som överskrider gränsen för laserklass 1. LASER Specification Type: Semiconductor laser AlGaAs Wave Length: 760 ~ 815 nm (Typical 785 nm) Divergence: θ = 53.
1.1 PRECAUTIONS WHEN TRANSPORTING To avoid damage * Keep the original packing materials for the drive unit. * Before you transport the drive unit, remove the disc from the drive unit and repack the drive unit in its original packing. 1.2 INSTALLATION LOCATION Do not place unit in the following environments. * High-temperature, high-humidity, extreme temperature changes. * Dusty * Excessive vibration/ sudden shock. * Inclined place. * Direct sunlight. 1.
➂ Do not write on, or paste paper to the surface of the disc. Should not paste any label to the outer back surface (the label side) of the disc, or it generates drive vibration due to imbalance of the disc. ➃ Do not store the disc in a place where the temperature is high. ➄ Do not use benzine, thinners and cleaners, etc. T h inne r s B en zin e ➅ Do not make the center hole larger. ➆ Do not bend the disc. ➇ Do not drop the disc, or subject it to shock.
CHAPTER 2 PARTS AND FUNCTIONS ➀ ➀ DISC TRAY ENGLISH 2.1 FRONT VIEW ➁ ➂ ➃ ➅ ➄ Accepts a disc. ➁ HEAD PHONE JACK (Model CR-594-B only) Headphone can be connected using a 3.5mm stereo mini plug. ➂ VOLUME (Model CR-594-B only) Adjusts audio output level of Headphone. ➃ BUSY INDICATOR Lights when data is being accessed from the disc, or the drive is playing an audio CD. ➄ EJECT / LOAD BUTTON Ejects and loads the disc tray.
CHAPTER 3 CONNECTIONS 3.1 CONNECTING VIEW Interface Connector DC (IN) Connector Jumper Pin DC Power Connector Audio Out Connector Digital Audio Out Connector Jumper Drive-Select (Master/Slave/CSEL) Cable select (CSEL) Slave Interface Cable Master (default) CHAPTER 4 GUIDE TO OPERATION 4.1 INSTALLATIONS • Starting the drive. ➀ Turn on the power supply. ➁ Press the eject button. The tray is ejected from the drive. ➂ Place the disc in the tray with the disc’s label facing up.
CHAPTER 5 GENERAL DESCRIPTION ENGLISH 5.1 FEATURE SUMMARY ➀ Embedded ATAPI Interface. ➁ Automatic Loading with tray. ➂ Horizontal and Vertical Installation. (Vertical : Vertical installation type only, 12 cm Disc only) ➃ Audio Playback Capability. ➄ 5 1/4" Half Height Design. 5.2 SYSTEM SET UP The ATAPI Devices are selected by the Address field in the Drive Select Register. When a single Device is attached to the interface, it shall be set as Device 0.
➄ Access time Random access time *3 Fullstroke access time *4 (48x mode) (48x mode) ➅ Buffer Size 90 ms [ typical ] 180 ms [ typical ] 128 KBytes MTBF 125,000 POH (DUTY 20%) NOTE: *1 48x mode: 48x speed mode *2 CAV : *3 Random access time : Average Data read over the complete area from 00 min. 02 sec. 00 block to 59 min. 58 sec. 74 blocks, more than 2000 times including latency and layered error correction time. *4 Fullstroke access time : From 00 min. 02 sec. 00 block to 59 min. 58 sec.
6.4 GENERAL PERFORMANCE ➀ Power requirement ➁ Dimensions (W x H x D) ➂ Weight ENGLISH +5 V 1.5 A +12 V 1.8 A 146 x 41.3 x 190 mm (exclude Front Bezel) 865 g typical 6.5 ENVIRONMENTAL CONDITIONS • Temperature • Humidity Operating 5 ~ 50 °C 5 ~ 90 %Rh (Non-condensation) Non-operating – 30 ~ 65 °C 5 ~ 95 %Rh (Non-condensation) 6.6 PICK UP LASER • Type • Wave Length • Divergence • Output power Semiconductor laser AlGaAs 760 ~ 815 nm (Typical 785 nm) θ = 53.5 ° 0.
APPENDIX Easy Installation of the Software for DOS / Windows 3.1 The CR-594-B/C CD-ROM drive must be installed into your host computer, before installing this software. 1. Turn the power of your personal computer on. If your system automatically loads Windows, you must exit Windows and reach the DOS prompt C:\. This explanation assumes that your floppy drive is designed "A" and your hard disk drive "C".
Weight and dimensions shown are approximate. Specifications are subject to change without notice. LMQT00437 Created in Japan Rev.