CD-RW DRIVE UNIT CW-7585-B INSTRUCTION MANUAL Please read through these instructions before operating this unit.
ENGLISH CD-R DRIVE UNIT CW-7585-B INSTRUCTION MANUAL Please read through these instructions before operating this unit. Interface : ATAPI BUSY WRITING COMPACT TABLE OF CONTENTS IMPORTANT SAFETY NOTICE .......................................................................... iv LASER SAFETY INFORMATION ....................................................................... 1 INTRODUCTION ................................................................................................. 2 1.
IMPORTANT SAFETY NOTICE NOTICE (1) You may not reproduce or transcribe any part of this publication without permission. (2) We reserve the right to revise this document at any time without notice. (3) If you have any questions about this document, contact your sales representative. SAFETY NOTICE (1) To prevent fire or electric shock, do not expose this appliance to rain or moisture. (2) To avoid electric shock or damage to the eyes due to laser beam, do not attempt to disassemble the cabinet.
LASER SAFETY INFORMATION ENGLISH Class 1 LASER Product This equipment is certified to comply with DHHS Rule 21 CFR Chapter 1,Subchapter J in effect as of date of manufacture. Elsewhere, the drive is certified to conform to the requirements of the International Electrotechnical Commission (IEC) 825 and CENELEC EN60825 for Class 1 laser products. Class 1 laser products are not considered to be hazardous. To ensure continued product safety, the following precautions should be heeded.
For Finnish VAROITUS! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle. For Swedish VARNING! Om apparaten används på annat sätt än i denna bruksanvisning specificerats, kan användaren utsättas för osynlig laserstrålning, som överskrider gränsen för laserklass 1. LASER Specification Type: Semiconductor laser GaAlAs Wave Length: 790 ± 10 nm Divergence: θ v = 13 ° ~ 21 ° Output Power: Read = 0.
CHAPTER 1 PRECAUTIONS WHEN OPERATING ENGLISH 1.1 PRECAUTIONS WHEN TRANSPORTING To avoid damage * Keep the original packing materials for the drive unit. * Before you transport the drive unit, remove the disc from the drive unit and repack the drive unit in its original packing. 1.2 INSTALLATION LOCATION Do not place unit in the following environment. * High-temperature, high-humidity, extreme temperature changes. * Dusty * Excessive vibration sudden shock. * Inclined place. * Direct sunlight. 1.
➂ Do not write on the recording / reading side, or paste paper to the surface of the disc. When labelling a disc for identification purposes, write only on the premarked label side using a soft, felt tip marker. ➃ Do not store the disc in a place where the temperature is high. ➄ Do not use benzine, thinners and cleaners, etc. A very mild soap and water solution should be used to clean the disc. ➅ Do not make the center hole larger. ➆ Do not bend the disc. ➇ Do not drop the disc, or subject it to shock.
CHAPTER 2 PARTS AND FUNCTIONS ENGLISH 2.1 FRONT VIEW ➀ BUSY WRITING ➁ ➂ ➃ ➄ COMPACT ➆ ➅ ➀ DISC TRAY Accepts a disc. ➁ HEAD PHONE JACK Headphone can be connected using a 3.5mm stereo mini plug. ➂ VOLUME Adjusts audio output level of Headphone. ➃ BUSY INDICATOR Lights when data is being accessed from the disc, or the drive is playing an audio CD. ➄ WRITING INDICATOR Lights when the drive is writing onto the CD-RW or CD-R disc. ➅ EJECT / LOAD BUTTON Ejects and loads the disc tray.
2.2 REAR VIEW ➄ ➂ ➃ ➀ ➁ ➀ INTERFACE CONNECTOR Connects to host computer’s interface connector. ➁ DC (IN) CONNECTOR ➂ AUDIO OUT CONNECTOR (Analog) ➃ JUMPER PIN Insert the jumper according to the Master / Slave / CSEL drive. (See the figure in the next page.) ➄ DIGITAL AUDIO OUT CONNECTOR NOTE: The serial format of digital data (not Audio data) output functions with some model.
CHAPTER 3 CONNECTIONS ENGLISH 3.
CHAPTER 4 GUIDE TO OPERATION 4.1 INSTALLATIONS • Starting the drive. ➀ Turn on the power supply. ➁ Press the eject button. The tray is ejected from the drive. ➂ Place the disc in the tray with the disc's label facing up. ➃ Press the eject button or press the tray lightly as in the following figure. The tray is retracted automatically. ➄ Loading start. CAUTION: • Do not insert any foreign objects into the disc tray. This could result in a malfunction. • Do not manually force the tray to open.
CHAPTER 5 GENERAL DESCRIPTION ENGLISH 5.1 FEATURE SUMMARY ➀ Embedded ATAPI Interface. ➁ Automatic Loading with tray. ➂ Horizontal and Vertical Installation. (Vertical : Vertical installation type only, 12 cm Disc only) ➃ Audio Playback Capability. ➄ MS-DOS CD-ROM Extensions Available. ➅ 5 1/4" Half Height Design. ➆ Digital data Rewrite and Read capability. 5.2 SYSTEM SET UP The ATAPI Devices are selected by the Address field in the Drive Select Register.
CHAPTER 6 SPECIFICATION SUMMARY 6.1 PERFORMANCE ➀ Disc diameter 12 cm ➁ Disc speed (1x mode) *1 (32x mode) *2 ➂ Data capacity 200 ~ 540 r/ min (CLV) *4 6322 ~ 7376 r/ min (CAV) *5 656 / 748 MBytes typical (Mode 1/ Mode 2) (74 min. and 42 sec. disc) ➃ Data transfer Rate Sequential (1x mode) Sequential (32x CAV mode) From buffer 150 / 171 kBytes/s (Mode 1/ Mode 2) 2055 ~ 4800 kBytes/s (Mode 1) 2342 ~ 5472 kBytes/s (Mode 2) 16.
➀ Number of channels ➁ Frequency response 2 ➂ SN Ratio ➃ Distortion ➄ Output level More than 80 dB ENGLISH 6.3 AUDIO PERFORMANCE 20 Hz ~ 20 kHz, –3 dB ~ +0.5 dB (Line-out) Less than 0.1% (1 kHz) 0.6 Vrms (Line-out) 6.4 GENERAL PERFORMANCE ➀ Power requirement ➁ Dimensions (W x H x D) ➂ Weight +5V 2.0 A +12V 2.0 A 146 x 41.3 x 190 mm (exclude Front Bezel) 1,000 g typical 6.5 ENVIRONMENTAL CONDITION • Temperature • Humidity 6.
CHAPTER 7 BEFORE REQUESTING SERVICE 7.1 TROUBLESHOOTING (1) There are many kinds of problems caused by misuse. When a problem occurs, check the table below which describes possible problems occurring with your CD-RW drive. (2) If the CD-RW drive is not operating correctly and you cannot restore operation by following the detailed procedures in the table below, do not remove the cover of the units or adjust further.
Weight and dimensions shown are approximate. Specifications are subject to change without notice.
