Operation 18 ing Down (power off your ¢ This procedure is shutting down without using the suspend or hibernation function. (Gr Pres "Suspend/Hibernation Functions”) 1 Display the shut down screen After saving important data and closing each application, select [Shut Down] from the [Stare] menu. i From the keyboard, You may choose to press down on , then select the menu with Confirm shut down Select [Shut down], then press {Yes}. Your computer will power off automatically.
NIECE The Reference Manual can be accessed on your computer. When a printer is connected, it is also possible to print. “This manual explains functions for you to make greater use of the computer, such as how to add peripheral devices, how the Setup Utility works and other useful information. CAUTION fh 1 Turn your computer on 2 Select [Reference Manual] in [Start] [Programs] [Panasonic] [On-Line Manuals] When launching the Reference Manual for the first time, the License Agreement will be displayed.
Operation 20 Usage Environment @ Environment ® Place the computer on a flat stable surface. ® In use: Temperate: 5°C1o35 Humidity: condensation) Not in use: Temperature: 140 °F} Humidity: condensation) @ Places not to use your computer #® Such areas may result in damage to the computer. Areas with electronic equipment [3 These areas may interfere with your display or cause g 7 LTe your computer to produce strange sounds.
The following is a list of the messages that BIOS can display. Most of them occur during POST. Some of them display information about a hardware device, the amount of memory installed. Others may indicate a problem with a device, such as the way it has been configured. Following the list are explanations of the messages and remedies for reported problems. If your stern displays one of except the messages marked below with an asterisk write down the message and contact Panasonic Technical Support.
FORSOOTH OS 02F5: DMA Test Failed Observer test earns: Cannot write to extended DMA (Direct Memory Access) registers. 02F6: Software NMI Failed Server Bios? test error: Cannot generate software NM (Non-Mask able Interrupt). 02FT: Fail Safe Timer NMI Failed Server Bios? test error: Fail-Safe Timer takes 00 long device address Conflict Address conflict for specified device. Allocation Error for: device fun ISA or VISA Configuration Utility resolve resource conflict for the specified device.
When a problem occurs, refer to this page. The Reference Manual also contains detailed information. If you stilt cannot troubleshoot the problems, contact Panasonic Technical Support. @ Starting Up ® Check the cable connection for the AC adapter. ® Check to see if a fully charged battery is properly installed. ® Remove the battery pack and disconnect the AC adapter. then connect them again Please input your password. If you have forgotten it, contact Panasonic Technical Support.
Display Unable fo connect 8 External display, The optional port replicator or the external display port adapter is required for use with an external display. {Cr Rao "Port Replicator”, "Using an External Display} ® At the time of purchase, the dispel ing is preset for an external display. If you connect an external display, the screen is displayed on the external display. ® When there is no display to an external display, «= Check your cable connection to the external display.
® Pre + + {0 reboot the computer. ® After powering down by pressing the power switch for more than four seconds, the power switch to power on and open the application again. If the program no longer works normally, go to [Start] [Settings [Control Panel] {Add/Remove Programs) to delete the program. Then, try installing the program once again ® Windows NT may not shut down if an attempt is bade to restart the computer after the installation of an application.
insignia Before Re installation @ Preparing # You will inced the Product Recovery CD-ROM and the BACKUP DISK (e.g, FIR STAID FD} you made earlier. (Refer to the Step on page 13 for details.) [Programs] [Panasonic]. If you can not create this If you have not created the BACKUP DISK, you can create by selecting {Create BACKUP DISK] in [Stan] sk, contact Panasonic Technical Support. ® The CD-ROM pack (CF-VCD271) "is required for the following re installation procedure.
THE SOFTWARE PROGRAM(S) ("PROGRAMS") FURNISHED WITH THIS PANASONIC® PRODUCT {*PRODUCT") ARE LICENSED ONLY TO THE END-USER AND MAY BE USED BY YOU ONLY IN ACCORDANCE WITH THE LICENSE TERMS DESCRIBED BELOW. YOUR USE OF THE PROGRAMS SHALL BE CONCLUSIVELY DEEMED TO CONSTITUTE YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE. Mitsubishi Electric Industrial Go., Lid. has developed or otherwise obtained the Programs and hereby licenses their use to you.
Appendis 28 Le(s} logiciel(s} (les "Logiciels") fournis avec ce produit Panasonic® (le "Produit’) sont exclusivement concédés en licence 4 l'utilisateur ultime et ifs ne peuvent &tre utilisés que conformément aux clauses contractuelles ci-dessous. En utilisant les logiciels, vous vous engagez de maniéré définitive a respecter les termes, clauses et candi rions des présentes. Matsushita Relectrice industriel Co., Ltd. a mis au point ou obtenu les Logiciels et vous en concédé Fiscalisation par les présentes.
i Ere Migrations} The internal microphone can not be used when an external micro§ phone is connected. {GF page 30) id lite Pad = {CF page 17) (Gr Referee "Key Combinations” (OP Referee “Touchscreen” EBT os Infrared Communication Port LED flits ; } : (Ghee “Infrared Data Communications”) Manual (Cr Perforce “LBD Indicators”) ES DCN Jack ceo Power Switch | power» Before using the computer for the first time, carefully read the (LIMITED USE LICENSE AGREEMENT]. If you agree to the conditions, remove the seal.
FTE 30 [ted Reference Han cal “Adding Memory") «MP RELEASE {CF Reference “Hard Disk Drive”) About the Problem of “Howling”; The problem of “howling sometimes occurs when a hind approaches the microphone In such cases, do the following. 1 In the volume control display. elect [Option] [Properties]. 2 Select [Playback] in "Adjust volume for”, and select [Microphone] in "Show the following volumetric controls” (or confirm that a check mark has been added for "Microphone”).
CF -27ERBGDAMEBEGDCM 333 MHe 300PE MHz 1.1 Cache Memory: 32 KB LZ (Second) Cache Memory: 256 Ki 28 MB (256 MB Max.) 5A MB {192 MB Max. } 2.5 MB 13.3 Typeface) (XGA) 12.1 Type (TFT) (SAGA} 256/65536/262144 colors (840 x 480 duteous X BO dots/1624 x 768 tads} 12 Gu» 6.
Appendix 34 For U.S.A PANASONIC PER! PEWTER AND PERIL! TIED WARRANTY Panasonic Computer Solution Company (referred fo as “Panasonic” will repair this product (other than software, which is covered by a separate warranty) with new of rebuilt parts, tees of charge in the U.5.A.
PANASONIC COMPUTER AND PERIPHERALS LIMITED WARRANTY Coverage Panasonic Canada Inc. (PGI) warrants ta yau, the first end user customer, this computer product (excluding software media), when purchased from PGI or from a PCI authorized reseller, to be fre from defects in materials and workmanship under normal use, subject a the terms set forth below, during the period of warranty coverage specified.
ala As an ENERGY STAR? Partner, Mitsubishi Electric Industrial Co., Ltd. has determined that this product meets the ENERGY STAR? guidelines for energy efficiency. Outline of the International ENERGY STAR® Office Equipment Program The international ENERGY STAR® Office Equipment Program is an international program that promotes energy saving through the use of computers and other office equipment.