User's Manual

       ADDENDUM

Operating In Tablet Mode

FCC RF Exposure Warning: In Tablet Mode, the computer can be operated in wireless

transmitter mode of operation. User must use X-Strap to assure that minimum 1.5cm spacing is

provided between person’s body and internal antenna(s) located on the side edges of LCD.

Refer to safety instructions on page 3 of the Operating Instructions for details.

PAGE 1
ADDENDUM Operating In Tablet Mode FCC RF Exposure Warning: In Tablet Mode, the computer can be operated in wireless transmitter mode of operation. User must use X-Strap to assure that minimum 1.5cm spacing is provided between person’s body and internal antenna(s) located on the side edges of LCD. Refer to safety instructions on page 3 of the Operating Instructions for details.
PAGE 2
CF-18 X-Strap Installation Instructions 1. Begin installation by removing screws from corners of you Toughbook 18. 3. Place the attachment brackets over the screw holes from step 1. Screw onto machine with screws provided in X-Strap kit. 2. Position the strap on the base of the Toughbook 18. Make sure that the clips are towards the front of the machine to allow quick and easy desk use. 5. While not in use, carry the machine at your side using the removable shoulder strap. 4.