User Guide Panasonic Model: R8U1FA6550Z P/N: R8U1FA6550Z BTv4.0 Dual Mode USB HCI Module FCC ID: U6YBT800 IC: 219P-BT800 Rev. A Nov. 6, 2017 Panasonic Avionics Corporation 26200 Enterprise Way, Lake Forest, CA 92630.
1. Scope This document describes overview of Panasonic Bluetooth module, R8U1FA6550Z, and its implementation note for the manufacturer uses the module. 2. Operational description Panasonic Bluetooth RJM module, R8U1FA6550Z is a Wireless Bluetooth module conforms to Bluetooth standards and operates in the unlicensed band at 2.4GHz. 3. Implementation note Panasonic Bluetooth RJM module, R8U1FA6550Z is designed is a PCBA to be placed into an enclosure.
The Bluetooth RJM module, R8U1FA6550Z complies with FCC Part 15 Rules for a Modular Approval. The transmitter module must not be located close to any other transmitter or antenna. With the above condition, no other testing is required, but the manufacturer must still have responsibility for the product compliance. In case the above conditions are not met, the FCC authorization is no longer valid and FCC ID is not allowed to be used.
This radio transmitter (Contains IC: 216P-BT800) has been approved by Industry Canada to operate with the antenna types listed in table above with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
• • • • Power Supply to Radio: 3.3VDC ~ 1.8VDC Antenna Type: Printed Circuit Board Microstrip Antenna Antenna Gain: -2.3dBi Clock Frequency: 48MHz 8. RF Exposure Evaluation Statement: a) Conclusion: a power level of 0.2mW (includes antenna gain) in BLE mode is EXEMPT. b) Conclusion: the measured power of 4.87mW (includes antenna gain) in FHSS mode is EXEMPT. c) Module separation distance is allowed to be ≤5mm. Panasonic Avionics Corporation 26200 Enterprise Way, Lake Forest, CA 92630.
