MIB3E_MQB37w_BTWIFI USER MANUAL for Skoda Octavia 24.01.
CONTENT GENERAL INSTRUCTIONS ..…………………………………………….3 TECHNICAL INFORMATION ..………………………………….…..…..4-5 INTRODUCTION TO OPERATION ..………………………………........6 PRIVACY SETTINGS INFORMATION……………………………........7 MANAGE FAVOURITES……………………………..…..……………........8 RADIO OVERVIEW……………………………..…..……………………........9 BLUETOOTH - SEARCHING FOR MOBILE PHONES .…….10 BLUETOOTH - CREATING A CONNECTION ………………….….…11 BLUETOOTH - DEAUTHORIZE A MOBILE TELEPHONE ………12 BLUETOOTH - INTERACTING WITH MOBILE PHONE .………..13 SMART LINK ...
GENERAL INSTRUCTIONS Caution Warning! The MIB3 can distract your attention from the traffic conditions. You could cause an accident and place yourself and others in danger. - In some countries, some Infotainment functions can no longer be selected when the vehicle is running faster than a certain speed. This is not a malfunction, but complies with the national legal regulations.
TECHNICAL INFORMATION The product MIB3 is developed and produced by Panasonic Automotive Systems Europe GmbH. The product is an integrated car entertainment systems. The MIB3 Entry series can support (depending on purchased configuration) several sources like MP3, USB (external connection box), Bluetooth, Wifi, AM/FM radio, android auto, Apple CarPlay and MirrorLink. Power supply voltage: Nominal: DC +12 [V] Temperature range: -40 to +80 [degree C] RF technical specification – Bluetooth 4.
TECHNICAL INFORMATION For units with Wifi RF technical specification – 5GHz Wifi: Frequency Range (no DFS): Bandwith1: 5 150 - 5 350 MHz: 5 735 - 5 835 MHz: 5180 MHz; 5200 MHz; 5220 MHz; 5240 MHz 5745 MHz; 5765 MHz; 5785 MHz, 5805 MHz, 5825 MHz Bandwith2: 5 150 - 5 350 MHz: 5 735 - 5 835 MHz: 5190 MHz; 5230 MHz 5755 MHz; 5795 MHz Bandwith3: 5 150 - 5 350 MHz: 5 735 - 5 835 MHz: 5210 MHz 5775 MHz Maximum conducted RF Output Power: Antenna gain: Modulation: 14 dBm or 25 mW -5,4 dBi to +0,7 dBi OFDM Co
INTRODUCTION TO OPERATION Long press on left control dial ① allows to switch the device on and off. Turning left control dial ① allows to change settings like volume. The MIB3 allows access to different menus with the function keys ② located around the display or the icons directly on the touch screen ④. Right control dial ③ allows to browse through menus e.g. ‚Settings‘ and select options by pressing. Sliding over the touch screen ④ left and right shows different pages.
PRIVACY SETTTINGS INFORMATION -- No available in Octavia -The MIB3 allows to adjust the privacy settings. The user can choose, which information will be provided to connected services. ① 1. Touch and hold a finger at the position of the green arrow. Moving the finger down will open a second menu. 2. Select ‚Essential data only‘ to adjust the level of privacy. For more information press the info icon (see green arrow). ② 3.
MANAGE FAVOURITES The MIB3 allows to create shortcuts (‚favourites‘) for user friendly control of the device. ① 1. Touch and hold at the position of the green arrow and move down. This will open a second menu. 2. Long press on one of the ‚Empty‘ icon . 3. Choose one of the features or select another page by sliding left or right. ② 4. To remove an already set ‚favourite‘, long touch the icon and press the ‚bin‘ icon (green arrow).
RADIO - OVERVIEW Press the left control dial to switch the radio on. ① 1. The AM/FM/DAB Radio can be started by pressing the function key ‚AUDIO‘ or the touch screen by toching the icon ‚Audio‘. 2. The main Media screen of MIB3_EI HU, shows a favorite list. The currently played radio channel or media source can be added by pressing the ‘+’ icon. Also, from this screen, already added favorites can be deleted. ② ③ 3.
BLUETOOTH - SEARCHING FOR MOBILE PHONES The MIB3 will search for devices that support Bluetooth´s Hands Free Profile (HFP) and Audio Streaming Profile (A2DP/AVRCP). 1. Activate Bluetooth on your mobile phone. If necessary make the mobile phone visible to other devices. ① ② 2. On the display press ‚Telephone‘ (note: the follwoing steps can only be done with ignition turned on). 3. Press ‚Select mobile phone‘ to select available devices. ③ 4.
BLUETOOTH – CREATING A CONNECTION Each mobile phone needs to be paired by exchanging a password. The pairing process can be started either from MIB3 or the mobile phone, if the car device does not show the mobile phone. 1. On the MIB3 screen select one of the available mobile phones to connect. ① ② 2. Confirm the pairing process. A passkey is exchanged. Confirmation needs to be done on MIB3 and the mobile phone. Allow data transfer on the mobile phone ③ 3. Confirm the next screen with ‚OK‘. 4.
BLUETOOTH – DEAUTHORIZE A MOBILE PHONE -- this function is currently unavailable – Deauthorization can be conducted in the menu ‚Telephone‘. ① 1. Enter the menu ‚Telephone‘ or press function key ‚Phone‘. 2. Select on the connected device on the screen. 3. Press the icon 4. Press on the icon ‚bin‘ deauthorized. .
BLUETOOTH – INTERACTING WITH A MOBILE PHONE After successfully connecting to a mobile phone several new options will be available. ① 1. Select the function key ‚Phone‘ or the icon ‚Telephone‘on the touch screen to receive more options. 2. The ‚Telephone‘ screen will show the name of the connected phone on the top. Pressing the ‚+‘ icon allows to add contacts directly from the address book. ② 3. The icon ‚Dial number‘ allows to make phone, Emergency, and Breakdown calls. 4.
SmartLink – Android Auto & MirrorLink ① 1. Select the menu ‚SmartLink‘. 2. Connect the mobile phone with the USB cable. 3. Select one of two options: Android Auto or MirrorLink. Confirm the pairing (exchange of key) on the MIB3 and the mobile phone. Allow data transfer on the mobile phone. Please note that the mobile phone needs to have the relevant apps installed. 4. Different Android Auto features can be found at the bottom of the screen: 1. Navigation / Maps 2. Communication / phone calls 3.
VEHICLE INFORMATION Vehicle information can be displayed by the MIB3. ① 1. On the default menu screen, select the ‘Vehicle’ icon or press the ‘CAR’ function key. 2. Several menus can be accessed by selecting the icon ‘!Vehicle stat’. 3. Driving data can be accessed by touching such icon. ② 4. All other vehicle settings can be accessed by selecting the ‘Settings’ icon.
MEDIA – RADIO, USB, BT AND SMARTLINK In this menu, several audio media sources can be selected for playing. 1. On the default menu screen, select the ‘Audio’ icon or press the ‘Audio’ function key. ① ② 2. When touching ‘!Media’, different media sources can be selected such as USB1 or USB2, Bluetooth audio or Smart link. 3. When selecting USB1, USB2 or BT audio sources, a media files list opens with the common media playing and browsing functionalities. ③ 4.
Driver Assistance -- this function is currently unavailable – In this menu, driver assistance functions can be accessed and adjusted such as cruise control, lane assist, driver alert system, etc.. ① 1. On the default menu screen, select the ‘Driver assist.’ icon to access driver assistance functionalities. 2. In the ‘Driver assist.’ screen, graphical representations for many driver assistance functions are presented and allow the user to switch the functions on and off. ② 3.
SOUND ADJUSTMENT MIB3 provides several options to individualize the sound in the car. ① 1. Select the icon ‚Sound‘ to view more options. 2. The ‚Equalizer‘ menu allows basic adjustments to the sound. 3. The ‚Sound focus‘ allows to control the focus point within the car. ② 4. The icon ‚Volume‘ provides options to individualize the volume of other systems and functions. 5. The icon ‚Settings‘ and menu button tone.
SYSTEM SETTINGS MIB3 system settings allow making a various amount of changes. 1. Select the icon ‚Settings‘ on the touch screen. 2. The following options are available: No. 1 2 3 4 5 6 7 8 9 10 11 12 13 Name Screen Time and date Language Additional keypad languages Units WLAN Manage apps Connect via Bluetooth Factory settinsgs System information Updates Copyrights Configuration wizard 3.
LEGAL INFORMATION The MIB3 system allows to obtain fast legal information about the system. ① 1. On second page of the default menu screen (swipe left) then select the ‘Legal’ Icon. 2. The ‘Legal’ screen shows brief legal information and additional QR codes. With your mobile phone QR camera application, scan one the QR codes to visit the Skoda-Connect web pages for further legal information (②, ③).
REGULATORY INFORMATION - EC Market EC Market Declaration of Conformity (DoC) Hereby, Panasonic Automotive Systems Europe GmbH declares that the radio equipment type Car Radio System with Bluetooth is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.doc.panasonic.de The equipment can be used in all countries in the European Union without any restrictions.
REGULATORY INFORMATION - USA/Canada market Modification statement / Déclaration de modification Panasonic Automotive & Industrial Systems Europe GmbH has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user's authority to operate the equipment. Panasonic Automotive & Industrial Systems Europe GmbH n'approuve aucune modification apportée a l'appareil par l'utilisateur, quelle qu'en soit la nature.