Water Resistant AM/FM Bluetooth Shower Clock Radio with Digital Tuning MODEL : JWM-160 USER MANUAL PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE A
CAUTION: SPLASH RESISTANCE This unit has been constructed to resist mild steam and light splashed from the shower bath only. It should not be operated under running water and under no circumstances should it be fully immersed in water. COMPLIANCE WITH FCC REGULATIONS FCC ID: 2AB4R-BT-068A This device complies with Part 15 of the FCC Rules.
DEAR JENSEN® CUSTOMER Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and t h e E l e c t r o n i c Industries Association's Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
LOCATION OF CONTROLS 1. 2. 3. 4. 5. 6. 7. POWER / SLEEP BAND/BT TIME SET/MEM ALARM SET/DIM 8. 9. 10. 11. 12. 13. 14.
POWER SOURCE The JWM-160 operates on 4 ‘AA' (UM-3) batteries. Tap the POWER / SLEEP Button (#1) button to turn ON the unit, tap the POWER SLEEP Button (#1) button again to turn the unit OFF. / For better performance and longer operating time, we recommend using alkaline-type batteries. 1. Remove the Battery Door of BATTERY COMPARTMENT (#14) on the back of the unit. 2. Following the polarity diagram on the back cabinet, insert 4 ‘AA' (UM-3) batteries (not included) and close the BATTERY DOOR.
LISTENING TO THE RADIO 1. 2. 3. 4. 5. 6. 7. Tap the POWER / SLEEP button (#1) to turn ON the JWM-160. Tap the BAND/BT button (#2) to select FM or AM mode, the radio frequency will show on LCD Display (#11). button (#5) or button (#7) to search for the next / previous Press and hold the available station. If the reception is poor, try Manual Tuning to fine-tune the station. Press the button (#5) or button (#7) briefly to manually tune through the frequency band.
BLUETOOTH OPERATION Pairing a Bluetooth enabled device with the JWM-160. 1. Tap the POWER / SLEEP button (#1) to turn the unit ON. 2. Tap the BAND/BT button (#2) to select Bluetooth mode, “bt” will show on the LCD Display. The BLUETOOTH INDICATOR (#10) will begin flashing slowly. 3. Turn on the Bluetooth function for the device you want to link to, and enable the search or scan function to find the JWM-160. 4. Select "JWM-160" from the device list when it appears on your device screen.
CONNECTING YOUR BLUETOOTH DEVICE USING NFC ABOUT NFC NFC (Near Field Communication) is a technology enabling short-range wireless communication between various devices, such as mobile phones and IC tags Thanks to the NFC function, data communication can be achieved easily just by touching the relevant symbol or designated location on NFC compatible devices. 1. Make sure your Smartphone or Bluetooth device has the NFC feature, and it is turned ON (enabled). 2.
Notes: If you select wake to radio ( icon showing), and are in RADIO mode when you turn the unit OFF, the unit will begin playing the last AM or FM station you were listening to once the wake time is reached. If you select wake to radio ( icon showing), but are in BLUETOOTH mode when you turn the unit OFF, the unit will begin playing the last AM station you were listening to once the wake time is reached.
CARE AND MAINTENANCE 1. Clean the unit with soft cloth. Solvent or detergent should never be used. 2. Avoid operating your unit under direct sunlight. 3. Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors. 4. For better Clock Display clarity, avoid operating the unit under direct sunlight or in strong room illumination.
90 DAY LIMITED WARRANTY AND SERVICE VALID IN THE U.S.A. ONLY SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective materials or factory workmanship for a period of 90 days from the date of original customer purchase and provided the product is utilized within the U.S.A. This warranty is not assignable or transferable.
Federal Communications Commission (FCC) Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.