PAN9028 Wi-Fi Dual Band 2.4 GHz/5 GHz and Bluetooth® Module Module Integration Guide Rev. 1.
PAN9028 Bluetooth/Wi-Fi Module 1 About This Document • Overview The PAN9028 is a 2.4 GHz/5 GHz ISM band Wi-Fi and Bluetooth radio module, which includes a wireless radio and a power management IC for easy integration of Wi-Fi and Bluetooth connectivity into various electronic devices. • • • • • • • • Generic interfaces include SDIO 3.0 and high speed UART for host processor connection • Software driver Linux® Characteristics • Surface Mount Type (SMT): Features • Dual band 2.4 GHz/5 GHz 802.
PAN9028 Bluetooth/Wi-Fi Module 1 About This Document By purchase of any of the products described in this document the customer accepts the document's validity and declares their agreement and understanding of its contents and recommendations. Panasonic Industrial Devices Europe GmbH (Panasonic) reserves the right to make changes as required at any time without notification. Please consult the most recently issued Module Integration Guide before initiating or completing a design.
PAN9028 Bluetooth/Wi-Fi Module 1 About This Document The third-party tools mentioned in this document are offered by independent third-party providers who are solely responsible for these products. Panasonic has no responsibility whatsoever for the performance, product descriptions, specifications, referenced content, or any and all claims or representations of these third-party providers.
PAN9028 Bluetooth/Wi-Fi Module 1 About This Document Table of Contents 1 About This Document......................................................................................................................... 6 1.1 Purpose and Audience .............................................................................................................. 6 1.2 Revision History ......................................................................................................................... 6 1.
PAN9028 Bluetooth/Wi-Fi Module 1 About This Document 1 About This Document 1.1 Purpose and Audience This Module Integration Guide is intended to support the easy integration of the PAN9028 into a product and to ensure the compliance with regulatory requirements. This guide gives an overview about the hardware design requirements by providing a reference design, which is the evaluation board of the PAN9028.
PAN9028 Bluetooth/Wi-Fi Module Symbol Description Menu > Menu item Path 1 About This Document Indicates a path, e.g. to access a dialog. Example: In the menu, select File > Setup page. This font File names Indicates file names displayed on the screen or to be selected by the user. Examples: pan1760.c contains the actual module initialization. This font Messages, user input, code Indicates messages, information, and code displayed on the screen or to be entered by the user.
PAN9028 Bluetooth/Wi-Fi Module 2 Overview 2 Overview The PAN9028 is a dual band 2.4 GHz and 5 GHz 802.11 a/b/g/n/ac Wi-Fi radio module with integrated Bluetooth BR/EDR/Low Energy (LE), specifically designed for highly integrated and cost-effective applications. The simultaneous and independent operation of the two standards enables very high data rates (802.11ac) and low-power operation (Bluetooth LE). Integrated power management, a fast dual-core CPU, 802.
PAN9028 Bluetooth/Wi-Fi Module 3 PAN9028 Module 3 PAN9028 Module 3.1 Block Diagram For Module Variant ENWF940[x]A1EF: â PMIC â NXP PM823 (optional) PAN9028 Wi-Fi and Bluetooth Radio Module IEEE 802.11 a/b/g/n/ac Bluetooth 5.2 (BR, Low Energy, and EDR) VDD +3.3 V GPIOs Sleep Clock Chip Antenna Crystal 26 MHz PDN â VIO/VIOSD COEX NXP 88W8987 Radio SoC BPF UART SDIO Interface SPDT PCM Interface DPX SPDT RF SW RF Pad For Module Variant ENWF940[x]A2EF: VDD +3.3 V â VDD +2.
PAN9028 Bluetooth/Wi-Fi Module 3.2 3 PAN9028 Module Land Pattern For Module Variant ENWF940[x]A1EF: Top View 1 2 3 4 5 6 7 8 9 10 11 12 G VOUT 2.2V VOUT 2.2V VIO VOUT 1.8V SD_CLK SD_CMD SD_DAT0 SD_DAT1 SD_DAT2 SD_DAT3 GND RF G F GND VDD 3.3V VDD 3.3V VIO_SD GPIO GPIO GPIO GPIO GPIO GPIO GND GND F E GPIO GND GND E D PG2 GND GND D C PGLDO GND GND C B PG1 GPIO DNC GPIO PDN UART UART UART GPIO GPIO RF_SW1 GND B A GND EN PMIC VOUT 1.
PAN9028 Bluetooth/Wi-Fi Module 3.3 3 PAN9028 Module Footprint The outer dimensions have a tolerance of ±0.35 mm. Top View Module Integration Guide Rev. 1.
PAN9028 Bluetooth/Wi-Fi Module 3.4 3 PAN9028 Module Solder Mask It is recommended to use the following layout for the soldering mask to reduce voids on the thermal pads. Use the dimensions: ✓ The Resist Mask should be 50 µm bigger than the pad size ( 3.3 Footprint). ✓ The Solder Mask should be 50 µm smaller than the pad size ( 3.3 Footprint); they are separated in two semi circles with 300 µm distance and a shifting about 150 µm. Layout 3.
PAN9028 Bluetooth/Wi-Fi Module 3 PAN9028 Module The antenna requires a cutout area of 8 mm × 5 mm under the PAN9028 module. This “Keep out Area” shall be located in every layer under the module antenna. Note for example the “Keep out Area” in all four layers of the PAN9028 evaluation board. It is recommended to verify the perfect position of the module in the target application before fixing the design. Antenna Placement Recommendation All dimensions are in millimeters.
PAN9028 Bluetooth/Wi-Fi Module 4 Power Supply 4 Power Supply 4.1 General Guidances The following conditions must be met: 4.2 ✓ The supply voltage must be free of AC ripple voltage (for example from a battery or a low noise regulator output). For noisy supply voltages, provide a decoupling circuit (for example a ferrite in series connection and a bypass capacitor to ground of at least 47 µF directly at the module). ✓ The supply voltage must not be exceedingly high or reversed.
PAN9028 Bluetooth/Wi-Fi Module 4.3 4 Power Supply ENWF940[x]A2EF Follow the correct power-up sequence of module which is specified in “PAN9028 Product Specification” 9.2 Product Information. Power Configuration Example with 3.3 V Host Operation (PMIC) Using the PAN9028 with VIO = 3.3 V and VIO SD = 3.3 V voltage levels disable the high-speed interfaces, and only SDIO 2.0 and slow UART speed are available. To enable high-speed interfaces SDIO 3.0 and High-speed UART, use VIO = 1.8 V and VIO SD = 1.
PAN9028 Bluetooth/Wi-Fi Module 4 Power Supply Power Configuration Example with 3.3 V Host Operation (Discrete) Using the PAN9028 with VIO = 3.3 V and VIO SD = 3.3 V voltage levels disable the high-speed interfaces, and only SDIO 2.0 and slow UART speed are available. To enable high-speed interfaces SDIO 3.0 and High-speed UART, use VIO = 1.8 V and VIO SD = 1.8 V voltage levels. VDD 1.8 V 3.3 V X DC 1.8 V 3.3 V 3.3 V PAN9028 VIO/VIO SD VIO RF DC Step-up 3.3 V DC 2.2 V 2.2 V VDD 2.
PAN9028 Bluetooth/Wi-Fi Module 4 Power Supply Power Configuration Example with 1.8 V Host Operation (Discrete) VDD 1.8 V 1.8 V 1.8 V DC 3.3 V 3.3 V PAN9028 VIO/VIO SD VIO RF DC Step-up 3.3 V DC 2.2 V 2.2 V VDD 2.2 V DC Dual Step-down 2.2 V LDO 1.8 V 1.8 V Module Integration Guide Rev. 1.0 1.8 V LDO VDD 1.8 V 1.1 V VDD 1.
PAN9028 Bluetooth/Wi-Fi Module 5 RF Path 5 RF Path 5.1 External Antenna Antenna Warning The PAN9028 is tested with a standard U.FL connector and with the antenna listed in the “PAN9028 Product Specification”. When integrated into the OEM’s product, these fixed antennas require installation preventing end users from replacing them with non-approved antennas. Any antenna not listed in the “PAN9028 Product Specification” must be tested to comply with FCC Section 15.
PAN9028 Bluetooth/Wi-Fi Module 5 RF Path Example 1: 50 ohm Coplanar Waveguide with Ground on mSDIO Adapter Trace width W = 180 µm Trace distance to ground S = 150 µm Substrate thickness H = 80 µm Effective permittivity 𝜀𝑟 = 3.9 Loss tangent tan 𝛿 = 0.015 S W S H Module Integration Guide Rev. 1.
PAN9028 Bluetooth/Wi-Fi Module 5 RF Path Example 2: 50 ohm Coplanar Waveguide with Ground and Micro Vias Trace width W = 300 µm Trace distance to ground S = 300 µm Substrate thickness H = 160 µm Effective permittivity 𝜀𝑟 = 4.2 Loss tangent tan 𝛿 = 0.006 Module Integration Guide Rev. 1.
PAN9028 Bluetooth/Wi-Fi Module 6 mSDIO Adapter 6 mSDIO Adapter 6.1 6.2 Functional Blocks Functional Block Description Interface A On-board antenna or bottom pad selection B Bluetooth data over UART or SDIO C Bluetooth Interface D External supply voltage can be connected E SDIO interface F U.FL connector G PAN9028 module X1 Resistor Jumper Configuration R6 R7 RF-Out 0R n.c. PAN9028 chip antenna n.c. 0R RF-UFL X1 connector Module Integration Guide Rev. 1.
PAN9028 Bluetooth/Wi-Fi Module 6.3 6 mSDIO Adapter Part Placement Module Integration Guide Rev. 1.
PAN9028 Bluetooth/Wi-Fi Module 7 Reference Design 7 Reference Design 7.1 Schematic 7.2 PCB Layout Keep traces at configuration pins (e.g. VCTL1/2, HOST_CONF[0]) as short as possible. Place components if needed as close as possible to the PAN9028 module to ensure optimal regulatory compliance performance! Module Integration Guide Rev. 1.
PAN9028 Bluetooth/Wi-Fi Module 7.2.1 Top Layer 7.2.2 Second Layer 7.2.3 Third Layer (3.3 V Power Plane) Module Integration Guide Rev. 1.
PAN9028 Bluetooth/Wi-Fi Module 7.2.4 7 Reference Design Bottom Layer Module Integration Guide Rev. 1.
PAN9028 Bluetooth/Wi-Fi Module 8 Regulatory and Certification Information 8 Regulatory and Certification Information 8.1 8.1.1 Federal Communications Commission (FCC) for US FCC Statement The following FCC statement has to be printed in the OEM end product user information: The PAN9028, including the ceramic antenna (model ENWF9408A1EF and model ENWF9408A2EF) and the antennas, which are listed in 8.1.5 Approved Antenna List, complies with Part 15 of the FCC Rules.
PAN9028 Bluetooth/Wi-Fi Module 8.1.3 8 Regulatory and Certification Information Label Requirements The following labelling requirements have to be implemented on the OEM end product: The OEM must ensure that FCC labelling requirements are met. This includes a clearly visible label (laser marking) on the outside of the OEM enclosure specifying the appropriate Panasonic FCC identifier for this product as well as the FCC notice above. The FCC identifier is FCC ID: T7V9028.
PAN9028 Bluetooth/Wi-Fi Module 8.1.5 Approved Antenna List Item Part Number Manufacturer 1 ANT162442DT- TDK 2001A2 2 X9001091W3DRMW 2016693-x 3 X9001091W3DRMB 2016693-x 8.1.6 8 Regulatory and Certification Information Kyocera AVX TE Connectivity Kyocera AVX TE Connectivity Type Polarization Frequency Band Gain (dBi) Chip antenna Linear 2.400 GHz to 2.484 GHz 2.1 5.150 GHz to 5.850 GHz 1.5 Dipole Linear antenna assembly 2.400 GHz to 2.485 GHz 1.8 5.150 GHz to 5.850 GHz 2.
PAN9028 Bluetooth/Wi-Fi Module 8.2 8 Regulatory and Certification Information Innovation, Science, and Economic Development (ISED) for Canada The following IC rules have to be followed by end product OEM’s: English The PAN9028 and versions are licensed to meet the regulatory requirements of ISED.
PAN9028 Bluetooth/Wi-Fi Module 8 Regulatory and Certification Information French PAN9028 (et ses versions) est garanti conforme aux dispositions règlementaires d’Industry Canada (ISED).
PAN9028 Bluetooth/Wi-Fi Module 8.2.1 8 Regulatory and Certification Information IC Notice The following IC notice has to be printed in English and French in the OEM end product user information: English The device PAN9028 and versions, including the integrated antenna mentioned in 8.1.5 Approved Antenna List, comply with Canada RSS-GEN Rules. The device meets the requirements for modular transmitter approval as detailed in RSS-Gen.
PAN9028 Bluetooth/Wi-Fi Module 8.2.2 8 Regulatory and Certification Information Labeling Requirements The following IC labelling requirements have to be followed by end product OEM’s: English Labeling Requirements The OEM must ensure that IC labelling requirements are met. This includes a clearly visible label on the outside of the OEM enclosure specifying the appropriate Panasonic IC identifier for this product as well as the IC Notice above. The IC identifier is: IC: 216Q-9028.
PAN9028 Bluetooth/Wi-Fi Module 8.3 8 Regulatory and Certification Information European Conformity According to RED (2014/53/EU) The PAN9028 modules with model number ENWF9408A1EF and ENWF9408A2EF comply with the standards according to the following LVD (2014/35/EU), EMC-D (2014/30/EU) together with RED (2014/53/EU) articles. Standards • • Due to the model size, the CE marking is displayed in the installation instruction and on the package label only.
PAN9028 Bluetooth/Wi-Fi Module 9 Contact Details 9 Contact Details 9.1 Contact Us Please contact your local Panasonic Sales office for details on additional product options and services: For Panasonic Sales assistance in the EU, visit https://eu.industrial.panasonic.com/about-us/contact-us Email: wireless@eu.panasonic.com For Panasonic Sales assistance in North America, visit the Panasonic website “Sales & Support” to find assistance near you at https://na.industrial.panasonic.