PAN9026 PAN9026 Wi-Fi Dual Band 2.4 GHz and 5 GHz and Bluetooth Module Product Specification Rev. 1.
PAN9026 Wi-Fi/Bluetooth Module • • Overview The PAN9026 is a 2.4 GHz and 5 GHz ISM band Wi-Fi and Bluetooth radio module, which includes a wireless radio for easy integration of Wi-Fi and Bluetooth connectivity into various electronic devices. • • Power management with sleep clock Coexistence interface for arbitration of colocated WLAN, Bluetooth, or Mobile Wireless System (e.g. LTE) Generic interfaces include SDIO 3.
PAN9026 Wi-Fi/Bluetooth Module By purchase of any of the products described in this document the customer accepts the document's validity and declares their agreement and understanding of its contents and recommendations. Panasonic reserves the right to make changes as required at any time without notification. Please consult the most recently issued Product Specification before initiating or completing a design. © Panasonic Industrial Devices Europe GmbH 2019. This specification sheet is copyrighted.
PAN9026 Wi-Fi/Bluetooth Module Table of Contents 1 2 3 4 5 6 About This Document......................................................................................................................... 6 1.1 Purpose and Audience .............................................................................................................. 6 1.2 Revision History ......................................................................................................................... 6 1.
7 PAN9026 Wi-Fi/Bluetooth Module Appendix ........................................................................................................................................... 98 7.1 Ordering Information ................................................................................................................ 98 7.2 Contact Details ........................................................................................................................ 99 Product Specification Rev. 1.
PAN9026 Wi-Fi/Bluetooth Module 1 About This Document 1 About This Document 1.1 Purpose and Audience This Product Specification provides details on the functional, operational, and electrical characteristics of the Panasonic PAN9026 modules. It is intended for hardware design, application, and Original Equipment Manufacturers (OEM) engineers. The product is referred to as “the PAN9026” or “the module” within this document. 1.2 Revision History Revision Date Modifications/Remarks 1.
PAN9026 Wi-Fi/Bluetooth Module 1 About This Document 1.3 Use of Symbols Symbol Description Note Indicates important information for the proper use of the product. Non-observance can lead to errors. Attention Indicates important notes that, if not observed, can put the product’s functionality at risk. [chapter number] [chapter title] Cross reference Indicates cross references within the document. Example: Description of the symbols used in this document 1.3 Use of Symbols. 1.
PAN9026 Wi-Fi/Bluetooth Module 2 Overview 2 Overview The PAN9026 is a dual band 2.4 GHz and 5 GHz 802.11 a/b/g/n Wi-Fi radio module with integrated Bluetooth BR/EDR/LE, specifically designed for highly integrated and cost-effective applications. The simultaneous and independent operation of the two standards enables high data rates (802.11n) and low-power operation (Bluetooth Low Energy). Integrated power management, a fast dual-core CPU, 802.
PAN9026 Wi-Fi/Bluetooth Module 2 Overview 2.1 Block Diagram VIO 1.8 V VDD 2.2 V Crystal 26 MHz VDD 1.8 V Crystal 32.768 kHz 32 kHz DISABLE GPIOs PAN9026 Wi-Fi & Bluetooth Radio Module IEEE 802.11 a/b/g/n Bluetooth 5.0 (BR, LE & EDR) BPF PDN Chip Antenna JTAG 88W8977 Radio SoC UART DPX 50 Ohm COEX SPDT VIO SD SDIO Interface PCM Interface SPDT CNTL Product Specification Rev. 1.2 VIO RF 3.
PAN9026 Wi-Fi/Bluetooth Module 2 Overview 2.2 Pin Configuration Pin Assignment G1 G2 G3 G4 G5 G6 G7 G8 G9 F1 F2 F3 F4 F5 F6 F7 F8 F9 E1 E2 E3 E4 D1 D2 D3 D4 C1 C2 C3 C4 B1 B2 B3 B4 B5 B6 B7 B8 B9 A1 A2 A3 A4 A5 A6 A7 A8 A9 E9 EP1 EP2 D9 Ground plane keep out area C9 Chip Antenna 10,00 mm Top View 17,50 mm Pin Functions No.
PAN9026 Wi-Fi/Bluetooth Module 2 Overview No. Pin Name Pin Type Description B1 1 PCM_CLK Input/output PCM clock signal, output if PCM master, input if PCM slave IO6 Digital I/O General Purpose IO: GPIO[6] PCM_DIN Input signal PCM data input signal IO4 Digital I/O General Purpose IO: GPIO[4] PCM_SYNC 2 Input/output PCM Sync Pulse signal, output if PCM master, input if PCM slave IO7 3 Digital I/O General Purpose IO: GPIO[7] B4 32KHZ_EN Input Signal If using VIO 3.
PAN9026 Wi-Fi/Bluetooth Module 2 Overview No.
PAN9026 Wi-Fi/Bluetooth Module 2 Overview No. Pin Name Pin Type Description EP1 EPAD1 Thermal pin Connect to ground EP2 EPAD2 Thermal pin Connect to gorund Product Specification Rev. 1.
PAN9026 Wi-Fi/Bluetooth Module 2 Overview SDIO Pins Function No.
PAN9026 Wi-Fi/Bluetooth Module 2 Overview 2.3 2.3.1 Power Management Power Configuration Example with 3.3 V Host Operation PAN9026 VDD 3.3 V 3.3 V VIO RF 3.3 V VIO/VIO SD PMIC 2.2 V VDD 2.2 V VIN 1.8 V VDD 3.3 V or Host GPIO VDD 1.8 V Enable 3.3 V DVSC[0] 88PG823 32KHZ_EN R 100 Ohm 2.3.2 Power Configuration Example with 1.8 V Host Operation VDD 1.8 V 1.8 V 1.8 V DC 3.3 V 3.3 V PAN9026 VIO/VIO SD VIO RF DC Step-up 3.3 V DC 2.2 V 2.2 V VDD 2.2 V DC Dual Step-down 2.
PAN9026 Wi-Fi/Bluetooth Module 2 Overview 2.4 Host Interfaces The bus interface connects several host interface bus units to the CPU bus of the device through the internal bus. The connection of each unit is multiplexed with other bus units. The high-speed UART interface is connected to the CPU bus through a separate bus.
PAN9026 Wi-Fi/Bluetooth Module 2 Overview 2.5 Peripheral Bus Interface The Peripheral Bus Unit (PBU) connects several low speed peripherals to the internal bus of the device. The device consists of the GPIO Interface and the One Time Programmable Memory.
PAN9026 Wi-Fi/Bluetooth Module 2 Overview 2.7 Coexistence The implemented coexistence framework is based on the IEEE 802.15.2 recommended practice Packet Traffic Arbitration (PTA) scheme and the Bluetooth Special Interest Group (Bluetooth SIG) Core Specification Volume 7 (Wireless Coexistence Volume). 2.7.1 WLAN/Bluetooth Channel Information Exchange Since Bluetooth and IEEE 802.11 b/g/n WLAN use the same 2.4 GHz frequency band, each can cause interference with another.
PAN9026 Wi-Fi/Bluetooth Module 2 Overview 2.7.3 System Configuration External MWS Device RF Front End BCA BT CTL WLAN MAC BCA WLAN CTL Bluetooth BCA COEX SIN MWS to BCA COEX SOUT BCA to MWS External LTE Device 88W8977 Radio SoC Host External BCA Device BT REQ BT STATE BCA BCA WLAN CTL WLAN MAC BT FREQ BT GRANTn 88W8977 Radio SoC Product Specification Rev. 1.
PAN9026 Wi-Fi/Bluetooth Module 2 Overview 2.7.4 WCI-2 Interface The coexistence interface includes a Mobile Wireless System (MWS) transport controller to accommodate a 2-wire, UART-based serial transport interface. This interface is a standard full-duplex UART (TXD and RXD) carrying logical signals framed as UART characters. In addition, it allows support of multiple logical channels. Interface Signals Pin No.
PAN9026 Wi-Fi/Bluetooth Module 2 Overview Real-Time Signaling Message The real-time signaling message is used to transport real-time signals over the 2-wire transport interface. The real-time signaling message conveys the real-time signals (Bluetooth Core Specification, Volume 7, Part A) in one message. The time reference point for the real-time signaling message is the end of message bit 5 (transition to stop bit).
PAN9026 Wi-Fi/Bluetooth Module 2 Overview Transport Control Message The transport control messages can modify the state and request state information of the MWS coexistence interface. Message MSG[0] MSG[1] MSG[2] MSG[3] MSG[4] Transport Control Message RESEND_REA L_TIME RFU RFU RFU RFU Signal Name Description RESEND_REAL_TIME This bit is set if a device wants to get a status update of the real-time signals.
PAN9026 Wi-Fi/Bluetooth Module 2 Overview MWS Inactivity Duration Message The inactivity duration messages is used to send the signal MWS_INACTIVITY_DURATION from the MWS device to the Coexistence Controller.
PAN9026 Wi-Fi/Bluetooth Module 2 Overview 2.7.5 Bluetooth Coexistence Arbiter Type Features Capability • • • • • • Arbitration • • • AFH Programmable coexistence interface timing, interface modes, and signal polarity to support a variety of external Bluetooth devices Programmable decision policies and transaction lock behavior for various use cases Interface with external or on-chip Bluetooth device Supports Bluetooth 1.1 or Bluetooth 1.
PAN9026 Wi-Fi/Bluetooth Module 2 Overview Type Features Decision Policies System configuration is a major consideration when planning decision policies. The configuration governs how RF paths are shared and how much interference will occur.
PAN9026 Wi-Fi/Bluetooth Module 2 Overview 2.7.6 Type Features Transaction Stopping The arbiter allows control of what transfers can be stopped after an initial grant. If allowed, a transaction can be stopped for higher priority request. A transaction stop decision is a function of the decision policies and transaction stopping control. The transaction stopping control is configurable per device and direction.
PAN9026 Wi-Fi/Bluetooth Module 2 Overview 2.7.8 LTE (MWS) Capability The device supports a Bluetooth SIG WCI-2 MWS coexistence signaling interface. The coexistence logical signaling is designed to enable a standard interface to allow an MWS device and a Coexistence Controller to exchange information and support cooperative coexistence. The WCI-2 signals carry time-critical information such as the start point of an MWS frame.
PAN9026 Wi-Fi/Bluetooth Module 2 Overview 2.7.9 ZigBee (MWS) Coexistence Capability ZigBee is based on the IEEE 802.15.4 standard and it is used by a suite of communication protocols to create Personal Area Networks (PANs) supporting home automation, lighting control, etc. ZigBee radios operate in the 2.4 GHz ISM band worldwide. Unlike Bluetooth, the ZigBee specification does not use AFH. When coexisting with WLAN/Bluetooth in the 2.
PAN9026 Wi-Fi/Bluetooth Module 2 Overview 2.8 WLAN Type IEEE 802.11/ Standards WLAN MAC Features • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Product Specification Rev. 1.2 802.11 data rates 1 and 2 Mbps (DSSS) 802.11b data rates 5.5 and 11 Mbps (CCK) 802.11a/g data rates 6, 9, 12, 18, 24, 36, 48, and 54 Mbps (OFDM) 802.11b/g performance enhancements 802.11n with maximum data rates up to 72 Mbps (20 MHz channel) and 150 Mbps (40 MHz channel) 802.
PAN9026 Wi-Fi/Bluetooth Module 2 Overview Type WLAN Baseband Features • • • • • • • • • WLAN Radio • • • • • • • WLAN Encryption • • • • • • • Product Specification Rev. 1.2 802.11n 1x1 SISO (WLAN SoC with SISO RF radio) Backward compatibility with legacy 802.
PAN9026 Wi-Fi/Bluetooth Module 2 Overview Operation Modes Parameter Operation Mode Specification Standard Conformance IEEE 802.11/IEEE 802.11b IEEE 802.11a IEEE 802.11g IEEE 802.11n Modulation Physical Layer Data Rates Supported Data Rates IEEE 802.11a OFDM IEEE 802.11b DSSS/CCK IEEE 802.11g OFDM IEEE 802.11n OFDM @ MCS0~7 and MCS32 (duplicate 6 Mbps) IEEE 802.11 1, 2 Mbps @ DSSS IEEE 802.11b 5.5, 11 Mbps @ DSSS/CCK IEEE 802.11g 6, 9, 12, 18, 24, 36, 48, 54 Mbps IEEE 802.
PAN9026 Wi-Fi/Bluetooth Module 2 Overview Channels and Frequencies (without Regulatory Restrictions) 2.4 GHz IEEE 802.
PAN9026 Wi-Fi/Bluetooth Module 2 Overview 5 GHz IEEE 802.11a/n 20 MHz Channels Channel 40 MHz Channels Frequency Unit Channel Frequency Unit 149 5 745 MHz 149-153 5 755 MHz 153 5 765 MHz 157-161 5 795 MHz 157 5 785 MHz 161 5 805 MHz 165 5 825 MHz 5 GHz IEEE 802.
PAN9026 Wi-Fi/Bluetooth Module 2 Overview Channel Tables based on Regulatory Domain/Country MCS0 – MCS2 MCS3 – MCS4 MCS5 – MCS7 0 = disable 1 = enable Device Mode Unit DFS Passive Scan Master Client MHz 15 15 15 14 14 14 13 - - - dBm 0 0 Y Y 2 2 417 MHz 16 16 16 15 15 15 14 - - - dBm 0 0 Y Y Y = Yes/N = No MCS5 – MCS7 40M MCS3 – MCS4 11n MCS0 – MCS2 20M 48M - 54M TX Power (maximum) 2 412 US, EU, CA, MR US, CA, MR EU 8 Channel 40M Channel 20M
PAN9026 Wi-Fi/Bluetooth Module 2 Overview 40M MCS5 – MCS7 MCS0 – MCS2 MCS3 – MCS4 MCS5 – MCS7 0 = disable 1 = enable Device Mode Y = Yes/N = No Unit DFS Passive Scan Master Client 11n 20M MCS3 – MCS4 36 16 16 15 15 15 14 14 14 13 dBm 0 0 Y Y 5 200 MHz 16 16 15 15 15 14 14 14 13 dBm 0 0 Y Y 5 220 MHz 16 16 15 15 15 14 14 14 13 dBm 0 0 Y Y 5 240 MHz 16 16 15 15 15 14 14 14 13 dBm 0 0 Y Y 5 260 MHz 16 16 15 15 15 14 14 14
PAN9026 Wi-Fi/Bluetooth Module 2 Overview 40M MCS5 – MCS7 MCS0 – MCS2 MCS3 – MCS4 MCS5 – MCS7 0 = disable 1 = enable Device Mode Y = Yes/N = No Unit DFS Passive Scan Master Client 11n 20M MCS3 – MCS4 - - - - - - - - - dBm - - N N 5 600 MHz - - - - - - - - - dBm - - N N 5 620 MHz - - - - - - - - - dBm - - N N 5 640 MHz - - - - - - - - - dBm - - N N 5 660 MHz 16 16 15 15 15 14 14 14 13 dBm 1 1 Y Y 5 680 MHz 16 16
PAN9026 Wi-Fi/Bluetooth Module 2 Overview 2.9 Bluetooth Type General Bluetooth Classic (BR/EDR) Features • • • • • • • • • • • • • • • • • • • • • • • • Product Specification Rev. 1.2 Supports Bluetooth 5.
PAN9026 Wi-Fi/Bluetooth Module 2 Overview Type Bluetooth Low Energy (LE) Features • • • • • • • • • • Product Specification Rev. 1.2 Broadcaster, Observer, Central, and Peripheral roles Supports link layer topology to be master and slave (connects up to 16 links) Shared RF with BR/EDR Encryption AES support Hardware support for intelligent Adaptive Frequency Hopping (AFH) LE Privacy 1.
PAN9026 Wi-Fi/Bluetooth Module 3 Detailed Description 3 Detailed Description 3.1 Dimensions All dimensions are in millimeters. 17 ,5 0 2,55 10 No. Item Dimension Tolerance Remark 1 Width 10.00 ± 0.35 2 Length 17.50 ± 0.35 3 Height 2.55 Product Specification Rev. 1.2 ± 0.
PAN9026 Wi-Fi/Bluetooth Module 3 Detailed Description 3.2 Footprint The outer dimensions have a tolerance of 0.35 mm. Top View G2 G1 G3 1.
PAN9026 Wi-Fi/Bluetooth Module 3 Detailed Description 3.3 Packaging The product is a mass production status product and will be delivered in the package described below. 3.3.1 Tape Dimensions T 0.30± 0.03 P2 2.0± 0.15(I) Do + 0.1 1.5 0.0 Po 4.0± 0.15(II) E1 1.75± 0.1 Y X W Bo So F(III) D1 2.0MIN X Y SECTION Y-Y A 0.20 ± 0.05 Ko DETAIL A Ao Bo Ko F P1 SO W 3.3.2 Ao P1 R0.75 SECTION X-X 10.55 +/- 0.15 18.05 +/- 0.15 3.00 +/- 0.15 14.20 +/- 0.15 20.00 +/- 0.15 28.40 +/- 0.15 32.
PAN9026 Wi-Fi/Bluetooth Module 3 Detailed Description 3.3.3 Component Direction 3.3.4 Reel Dimension Product Specification Rev. 1.
PAN9026 Wi-Fi/Bluetooth Module 3 Detailed Description 3.3.5 Package Label Example 3.3.
PAN9026 Wi-Fi/Bluetooth Module 3 Detailed Description 3.4 Case Marking Example for PAN9026 (top view) Product Specification Rev. 1.
PAN9026 Wi-Fi/Bluetooth Module 4 Specification 4 Specification All specifications are over temperature and process, unless indicated otherwise. 4.1 Default Test Conditions Temperature: Humidity: Supply Voltage: Product Specification Rev. 1.2 25 °C ± 10 °C 40 % to 85 % RH VDD2V2 = 2.2 V VDD1V8 = 1.8 V VIORF = 3.3 V VIOSD = 3.3 V VIO = 1.
PAN9026 Wi-Fi/Bluetooth Module 4 Specification 4.2 Absolute Maximum Ratings The maximum ratings may not be exceeded under any circumstances, not even momentarily or individually, as permanent damage to the module may result. Symbol Parameter TSTOR Storage Temperature VESD ESD Robustness Condition Min. Typ. Max.
PAN9026 Wi-Fi/Bluetooth Module 4 Specification 4.3 Recommended Operating Conditions The maximum ratings may not be exceeded under any circumstances, not even momentarily or individually, as permanent damage to the module may result. Symbol Parameter Condition Min. Typ. TA Ambient Operating Temperature Range Extended grade VDD1V8 1V8 Supply 9 Voltage VDD voltage for Baseband and CPU on pins A4, A5 1.
PAN9026 Wi-Fi/Bluetooth Module 4 Specification 4.3.1 Digital Pin Characteristics VIO with 1.8 V Operations12 Symbol Parameter Condition Min. Typ. Max. Units VIH High Level Input Voltage 1.8 V operation (VIO = 1.8 V) 0.7 VIO VIO +0.4 V VIL Low Level Input 1.8 V operation (VIO = 1.8 V) Voltage -0.4 0.3 VIO V VHYS Input Hysteresis 100 VOH High Level Ouput Voltage 1.8 V operation (VIO = 1.8 V) VHO Low Level Output Voltage 1.8 V operation (VIO = 1.8 V) mV VIO -0.4 V 0.
PAN9026 Wi-Fi/Bluetooth Module 4 Specification VIOSD 3.3 V Operation for SDIO I/F12 Symbol Parameter Condition Min. Typ. VIH High Level Input Voltage 3.3 V operation (VIOSD = 3.3 V) 0.7 VIO_SD Max. Units VIO_SD V +0.4 VIL Low Level Input 3.3 V operation (VIOSD = 3.3 V) Voltage -0.4 0.3 VIO_SD V VHYS Input Hysteresis 100 mV VOH High Level Ouput Voltage 3.3 V operation (VIOSD = 3.3 V) VIOSD V VHO Low Level Output Voltage 3.3 V operation (VIOSD = 3.3 V) -0.4 0.
PAN9026 Wi-Fi/Bluetooth Module 4 Specification Symbol IVDD2V2 @ TX Parameter Active Transmit13 Product Specification Rev. 1.2 Condition Min. Typ. Max. Units PTX = +13 dBm for 5 GHz band 802.11n 40M @ MCS7 250 mA PTX = +16 dBm for 2.4 GHz band 802.11b @ 11 Mbps 175 mA PTX = +15 dBm for 2.4 GHz band 802.11g @ 54 Mbps 180 mA PTX = +14 dBm for 2.4 GHz band 802.11n 20M @ MCS7 185 mA PTX = +15 dBm for 5 GHz band 802.11a @ 54 Mbps 180 mA PTX = +14 dBm for 5 GHz band 802.
PAN9026 Wi-Fi/Bluetooth Module 4 Specification Symbol Parameter Condition IVDD1V8 @ RX Active Receive14 5 GHz band 802.11a @ 54 Mbps 85 mA 5 GHz band 802.11n 20M @ MCS7 95 mA 5 GHz band 802.11n 40M @ MCS7 110 mA 2.4 GHz band 802.11b @ 11 Mbps 65 mA 2.4 GHz band 802.11g @ 54 Mbps 70 mA 2.4 GHz band 802.11n 20M @ MCS7 75 mA Active Receive14 5 GHz band 802.11a/n 20 µA 2.4 GHz band 802.
PAN9026 Wi-Fi/Bluetooth Module 4 Specification RF Control Current Consumption 4.3.3 Symbol Parameter Condition Min. Typ. Max.
PAN9026 Wi-Fi/Bluetooth Module 4 Specification 4.3.4 Power-up Sequence Symbol Parameter VDD2V2 Voltage level of VIOSD 100 % VDD1V8 Voltage level of VDD2V2 90 % PDn Voltage level of VDD2V2 90 % Product Specification Rev. 1.2 Min. Typ. Max.
PAN9026 Wi-Fi/Bluetooth Module 4 Specification 4.3.5 Host Interface 4.3.5.1 SDIO Interface The SDIO Interface pins are powered from the VIOSD voltage supply with either 3.3 V or 1.8 V. The SDIO electrical specifications are identical for the 1-bit and 4-bit SDIO modes. For the DC specification please refer to 4.3.1 Digital Pin Characteristics. SDIO Timing Data: Default and High-Speed Modes (VIOSD 3.
PAN9026 Wi-Fi/Bluetooth Module 4 Specification SDIO Protocol Timing Diagram: Default Speed Mode (VIOSD 3.3 V) SDIO Protocol Timing Diagram: High-Speed Mode (VIOSD 3.3 V) Product Specification Rev. 1.
PAN9026 Wi-Fi/Bluetooth Module 4 Specification SDIO Timing Data: SDR12, SDR25, SDR50 Modes (VIOSD 1.8 V) Symbol Parameter Condition fPP Clock Frequency SDR12/SDR25/ SDR50 25 TIS Input Setup Time SDR12/SDR25/ SDR50 3 ns SDR12/SDR25/ SDR50 0.8 ns 10 TIH Input Hold Time TCLK Clock Time SDR12/SDR25/ SDR50 TCR , TCF Rise Time, Fall Time TCR , TCF < 2 ns (max.) at 100 MHz CCARD = 10 pF TODLY Output Delay Time CL 30 pF TOH Output Hold Time CL = 15 pF Min. Typ. Max.
PAN9026 Wi-Fi/Bluetooth Module 4 Specification Symbol Parameter Condition TCR, TCF Rise Time, Fall Time TCR, TCF < 4.00 ns (max.) at 50 MHz, CCARD = 10 pF DDR50 Clock Duty Min. Typ. Max. Units 0.2 * TCLK ns 55 % DDR50 45 DDR50 6 ns DDR50 0.
PAN9026 Wi-Fi/Bluetooth Module 4 Specification SDIO CMD Timing Diagram: DDR50 Mode (VIOSD 1.8 V, 50 MHz) SDIO DAT[3:0] Timing Diagram: DDR50 Mode19 (VIOSD 1.8 V, 50 MHz) 19 In DDR50 mode, DAT[3:0] lines are sampled on both edges of the clock (not applicable for CMD line). Product Specification Rev. 1.
PAN9026 Wi-Fi/Bluetooth Module 4 Specification 4.3.5.2 High-Speed UART Interface The High-Speed UART Interface pins are powered from the VIO voltage supply with 1.8 V. For the DC specification please refer to 4.3.1 Digital Pin Characteristics.
PAN9026 Wi-Fi/Bluetooth Module 4 Specification Interface Transport Settings Item Range Default Comment Baudrate 1 200 ~ 4 000 000 Data Bits 5~8 8 LSB first Parity Bits 0~4 0 1/1.
PAN9026 Wi-Fi/Bluetooth Module 4 Specification 4.3.6 Peripheral Interface The Peripheral Interface pins are powered from the VIO voltage supply with 1.8 V. For the DC specification please refer to 4.3.1 Digital Pin Characteristics. 4.3.6.1 GPIO Interface The General-Purpose I/O (GPIO) interface is used to implement user-defined input and output signals to and from the device, such as external interrupts and other user-defined I/Os.
PAN9026 Wi-Fi/Bluetooth Module 4 Specification 4.3.7 4.3.7.1 Audio Interface PCM Interface Interface Signals Pin No.
PAN9026 Wi-Fi/Bluetooth Module 4 Specification PCM Timing Data: Master Mode Symbol Min. Typ. FBCLK Max. Units 2/2.048 Duty CycleBCLK 0.4 TBCLK rise/fall 0.5 MHz 0.6 3 TDO ns 15 ns TDISU 20 ns TDIHO 15 ns TBF 15 ns PCM Timing Diagram: Master Mode TBCLK CLK TTDO DOUT TDISU TDIHO DIN TBF SYNC Product Specification Rev. 1.
PAN9026 Wi-Fi/Bluetooth Module 4 Specification PCM Timing Data: Slave Mode Symbol Min. Typ. FBCLK Max. Units 2/2.048 Duty CycleBCLK 0.4 TBCLK rise/fall 0.5 MHz 0.6 3 TDO ns 30 ns TDISU 15 ns TDIHO 10 ns TBFSU 15 ns TBFHO 10 ns PCM Timing Diagram: Slave Mode TBCLK CLK TTDO DOUT TDISU TDIHO TBFSU TBFHO DIN SYNC Product Specification Rev. 1.
PAN9026 Wi-Fi/Bluetooth Module 4 Specification 4.3.8 Coexistence Interface The Coexistence Interface pins are powered from the VIO voltage supply with 1.8 V. For the DC specification please refer to 4.3.1 Digital Pin Characteristics. 4.4 4.4.1 RF Electrical Characteristics WLAN Radio Specification Receive Mode Parameter Condition Min. Typ. Max. Units RF Frequency Range 2.4 GHz: IEEE 802.11b/g/n 2 400 2 483.5 MHz 5 GHz: IEEE 802.11a/n 4 900 5 925 MHz Transmit Mode 4.4.2 4.4.2.
PAN9026 Wi-Fi/Bluetooth Module 4 Specification Parameter Condition Minimum Receive Sensitivity 4.4.2.2 Min. Typ. 1 Mbps (DSSS) FER ≤ 8 % -98 2 Mbps (DSSS) FER ≤ 8 % -93 5.5 Mbps (CCK) FER ≤ 8 % -91 11 Mbps (CCK) FER ≤ 8 % -89 Maximum Input Level FER ≤ 8 % Adjacent Channel Rejection FER ≤ 8 % Max. Units dBm -80 dBm dBm -76 dBm -10 dBm 35 dB RF Characteristics for IEEE 802.11g Assume VDD2V2 = 2.2 V, VDD1V8 = 1.8 V, VIORF = 3.3 V, VIOSD = 3.3 V, VIO = 1.
PAN9026 Wi-Fi/Bluetooth Module 4 Specification Parameter Condition 64-QAM, CR 3/4 (54 Mbps) 4.4.2.3 Typ. PER ≤ 10 % -76 PER ≤ 10 % Maximum Input Level Adjacent Channel Rejection Min. Max. Units -65 dBm -20 dBm BPSK, CR 1/2 (6 Mbps) PER ≤ 10 % 16 dB 64-QAM, CR 3/4 (54 Mbps) PER ≤ 10 % -1 dB RF Characteristics for IEEE 802.11n (BW 20 MHz, 2.4 GHz) Assume VDD2V2 = 2.2 V, VDD1V8 = 1.8 V, VIORF = 3.3 V, VIOSD = 3.3 V, VIO = 1.8 V and Tamb = 25 °C, if nothing else stated.
PAN9026 Wi-Fi/Bluetooth Module 4 Specification Parameter Condition Typ. Adjacent Channel Rejection Units PER ≤ 10 % -76 -66 dBm 58.5 Mbps (MCS6) PER ≤ 10 % -74 -65 dBm 65 Mbps (MCS7) PER ≤ 10 % -73 -64 dBm -20 dBm PER ≤ 10 % 21 Max. 52 Mbps (MCS5) Maximum Input Level 21 Min. 65 Mbps (MCS7) PER ≤ 10 % -2 dB The Adjacent Channel Rejection levels apply only to non-STBC modes, MCS 0~7, 800 ns LGI, and BCC. Product Specification Rev. 1.
PAN9026 Wi-Fi/Bluetooth Module 4 Specification 4.4.2.4 RF Characteristics for IEEE 802.11n (BW 40 MHz, 2.4 GHz) Assume VDD2V2 = 2.2 V, VDD1V8 = 1.8 V, VIORF = 3.3 V, VIOSD = 3.3 V, VIO = 1.8 V and Tamb = 25 °C, if nothing else stated. 50 terminal load connected to the RF connector. Parameter Condition RF Frequency Range 2.4 GHz Carrier Frequency Tolerance Transmit Output Power Spectrum Mask Min. Typ. 2 483.
PAN9026 Wi-Fi/Bluetooth Module 4 Specification 4.4.2.5 RF Characteristics for IEEE 802.11n (BW 20 MHz, 5 GHz) Assume VDD2V2 = 2.2 V, VDD1V8 = 1.8 V, VIORF = 3.3 V, VIOSD = 3.3 V, VIO = 1.8 V, and Tamb = 25 °C, if nothing else stated. 50 terminal load connected to the RF connector. Parameter Condition RF Frequency Range Spectrum Mask Typ.
PAN9026 Wi-Fi/Bluetooth Module 4 Specification 4.4.2.6 RF Characteristics for IEEE 802.11n (BW 40 MHz, 5 GHz) Assume VDD2V2 = 2.2 V, VDD1V8 = 1.8 V, VIORF = 3.3 V, VIOSD = 3.3 V, VIO = 1.8 V, and Tamb = 25 °C, if nothing else stated. 50 terminal load connected to the RF connector. Parameter Condition RF Frequency Range Spectrum Mask Typ.
PAN9026 Wi-Fi/Bluetooth Module 4 Specification 4.4.2.7 RF Characteristics for IEEE 802.11a Assume VDD2V2 = 2.2 V, VDD1V8 = 1.8 V, VIORF = 3.3 V, VIOSD = 3.3 V, VIO = 1.8 V, and Tamb = 25 °C, if nothing else stated. 50 terminal load connected to the RF connector. Parameter RF Frequency Range Condition Spectrum Mask Typ.
PAN9026 Wi-Fi/Bluetooth Module 4 Specification 4.4.3 Bluetooth RF Characteristics Assume VDD2V2 = 2.2 V, VDD1V8 = 1.8 V, VIORF = 3.3 V, VIOSD = 3.3 V, VIO = 1.8 V, and Tamb = 25 °C, if nothing else stated. 50 terminal load connected to the RF connector. 4.4.3.1 Receiver Section RF Characteristics Parameter Condition Min. RF Frequency Range Interference Performance (Basic Rate) C/I Ratio Typ. 2 400 GFSK RSL = -67 dBm BER ≤ 0.1 % C/I Ratio π/4-DQPSK RSL = -67 dBm BER ≤ 0.
PAN9026 Wi-Fi/Bluetooth Module 4 Specification Parameter Condition Out-of-band Blocking (Basic Rate) GFSK Interfering Signal Power Out-of-band Blocking (Low Energy) Min. RSL = -67 dBm BER ≤ 0.1 % GFSK Interfering Signal Power RSL = -67 dBm BER ≤ 0.1 % RSSI Range Resolution = 1 dB Typ. Max. 30 MHz: 2 000 MHz -10 dBm 2 GHz: 2.399 GHz -27 dBm 2.484 GHz: 3 GHz -27 dBm 3 GHz: 12.75 GHz -10 dBm 30 MHz: 2 000 MHz -30 dBm 2.003 GHz: 2.399 GHz -35 dBm 2.484 GHz: 2.
PAN9026 Wi-Fi/Bluetooth Module 4 Specification 4.5 Reliability Tests The measurement should be done after the test device has been exposed to room temperature and humidity for one hour. No. Item Limit Condition 1 Vibration test Electrical parameter should be in specification Freq.: 10 Hz~50 Hz; Amplitude: 1.5 mm; 20 min./cycle, 1 h each of XYZ axis 2 Shock test See above Dropped 3 times onto hard wood from a height of 1 m 3 Heat cycle test See above -40 °C for 30 min.
PAN9026 Wi-Fi/Bluetooth Module 4 Specification 4.6 Recommended Soldering Profile • • • • • Reflow permissible cycle: 2 Opposite side reflow is prohibited due to module weight More than 75 percent of the soldering area shall be coated by solder The soldering profiles should be adhered to in order to prevent electrical or mechanical damage Soldering profile assumes lead-free soldering Product Specification Rev. 1.
PAN9026 Wi-Fi/Bluetooth Module 5 Cautions 5 Cautions Failure to follow the guidelines set forth in this document may result in degrading of the module functions and damage to the module. 5.1 Design Notes Radio requires a RF ground plane on the rest of the Printed Circuit Board (PCB) area. This can be located on any layer of the PCB. For best performance, extend the RF ground plane the entire length of your board. Connect all ground pins and do not notch the ground plane around the module.
PAN9026 Wi-Fi/Bluetooth Module 5 Cautions 4. If a vinyl-covered wire comes into contact with the module, the wire cover will melt and generate toxic gas, damaging the insulation. Never allow contact between a vinyl cover and these modules to occur. 5. This module should not be mechanically stressed or vibrated when reflowed. 6. To repair the board by hand soldering, follow the conditions set forth in this chapter. 7. Do not wash this product. 8.
PAN9026 Wi-Fi/Bluetooth Module 5 Cautions 5. Follow the specification when stacking packed crates (max. 10). 5.5 Safety Cautions These specifications are intended to preserve the quality assurance of products and individual components. Before use, check and evaluate the operation when mounted on your products. Abide by these specifications without deviation when using the products. These products may short-circuit.
PAN9026 Wi-Fi/Bluetooth Module 5 Cautions 5.7 5.7.
PAN9026 Wi-Fi/Bluetooth Module 6 Regulatory and Certification Information 6 Regulatory and Certification Information 6.1 6.1.1 Federal Communications Commission (FCC) for US FCC Notice The PAN9026, including the ceramic antenna (ENWF9201A1EF and ENWF9208A1EF), and the antennas, which are listed in 6.1.5 Approved Antenna List, complies with Part 15 of the FCC Rules. The device meets the requirements for modular transmitter approval as detailed in FCC public Notice DA00-1407.
PAN9026 Wi-Fi/Bluetooth Module 6 Regulatory and Certification Information It is recommended to try to correct the interference by one or more of the following measures: • • • • 6.1.3 Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
PAN9026 Wi-Fi/Bluetooth Module 6 Regulatory and Certification Information 6.1.6 RF Exposure To comply with FCC RF Exposure requirements, the OEM must ensure that only antennas from the Approved Antenna List are installed 6.1.5 Approved Antenna List. The preceding statement must be included as a caution statement in manuals for products operating with the approved antennas in the previous table to alert users on FCC RF Exposure compliance.
PAN9026 Wi-Fi/Bluetooth Module 6 Regulatory and Certification Information 2.3 Systems Unlicensed National Information Infrastructure Devices in the 5 GHz Bands Reference Method KDB 905462 D02 v02 Reference / Requirement 15E.407(h)(2) Complied Module M/N ENWF9201A1EF Summarize the specific operational use conditions Please refer to sections 5 Cautions, 5.3 Usage Condition Notes, and 6.1.5 Approved Antenna List. 2.
PAN9026 Wi-Fi/Bluetooth Module 6 Regulatory and Certification Information 6.2 Innovation, Science, and Economic Development (ISED) for Canada English PAN9026 and versions are licensed to meet the regulatory requirements of ISED. License for M/N: ENWF9203A1EF: IC: 216Q-9026 License for M/N: ENWF9208A1EF: IC: 216Q-9026 Manufacturers of mobile, fixed, or portable devices incorporating this module are advised to clarify any regulatory questions and ensure compliance for SAR and/or RF exposure limits.
PAN9026 Wi-Fi/Bluetooth Module 6 Regulatory and Certification Information 6.2.1 Radio Standards Specification RSS-247 Issue 2 The Radio Standards Specification RSS-247, Issue 2, Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and License-Exempt Local Area Network (LE-LAN) Devices, replaces RSS-247, Issue 1, dated May 2015. It sets out certification requirements for radio apparatus operating in the bands 2 400 MHz to 2 483.
PAN9026 Wi-Fi/Bluetooth Module 6 Regulatory and Certification Information RSS-247 Section 5.1 Frequency Band (MHz) 2 400 to 2 483.5 Systems Frequency Hopping Systems Systems out of Scope FHS operating in the band 5 725 MHz to 5 850 MHz Fixed point-to-point systems Requirements The maximum peak conducted output power shall not exceed W if the hopset uses 75 or more hopping channels; the maximum peak conducted output power shall not exceed 0.125 W if the hopset uses less than 75 hopping channels.
PAN9026 Wi-Fi/Bluetooth Module 6 Regulatory and Certification Information RSS-247 Section 5.4 Frequency Band (MHz) 2 400 to 2 483.5 Systems FHSs operating in the band 2 400 to 2 483.5 MHz. DTSs employing digital modulation techniques operating in the band 2 400 MHz to 2 483.5 MHz. Systems out of Scope FHSs operating in the band 902 MHz to 928 MHz and 5 725 MHz to 5 850 MHz. DTSs employing digital modulation techniques operating in the bands 902 MHz to 928 MHz.
PAN9026 Wi-Fi/Bluetooth Module 6 Regulatory and Certification Information 6.2.1.5 Requirements for LE-LAN and DTS operating in the 5 GHz Band The section provides standards for Licence-Exempt Local Area Network (LE-LAN) devices operating in the bands: • • • • • • 5 150 to 5 250 MHz, 5 250 to 5 350 MHz, 5 470 to 5 600 MHz, 5 650 to 5 725 MHz, 5 725 to 5 850 MHz For DTSs operating in the band 5 725 MHz to 5 850 MHz that employ digital modulation technology, but are not designed for LE-LAN operation.
PAN9026 Wi-Fi/Bluetooth Module 6 Regulatory and Certification Information RSS-247 Section 6.2.2 Frequency Band (MHz) 5 250 to 5 350 Device Type For devices, other than devices installed in vehicles. Devices out of Scope OEM devices installed in vehicles, Outdoor fixed devices, and other devices having an e.i.r.p. grater than 200 mW.
PAN9026 Wi-Fi/Bluetooth Module 6 Regulatory and Certification Information RSS-247 Section 6.2.4 Frequency Band (MHz) 5 725 to 5 850 Device Type For equipment operating in the band 5 725 MHz to 5 850 MHz Devices out of Scope Fixed point-to-point devices and devices with antenna gain greater than 6 dBi. Power Limits The minimum 6 dB bandwidth shall be at least 500 kHz. The maximum conducted output power shall not exceed 1 W.
PAN9026 Wi-Fi/Bluetooth Module 6 Regulatory and Certification Information 6.2.2 IC Notice English The device PAN9026 and versions ( 7.1 Ordering Information), including the antennas ( 6.1.5 Approved Antenna List), comply with Canada RSS-Gen Rules. The device meets the requirements for modular transmitter approval as detailed in RSS-Gen. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2.
PAN9026 Wi-Fi/Bluetooth Module 6 Regulatory and Certification Information 6.2.3 Labeling Requirements English Labeling Requirements The OEM must ensure that IC labelling requirements are met. This includes a clearly visible label on the outside of the OEM enclosure specifying the appropriate Panasonic IC identifier for this product as well as the IC Notice above.
PAN9026 Wi-Fi/Bluetooth Module 6 Regulatory and Certification Information 6.3 European Conformity According to RED (2014/53/EU) The PAN9026 modules with model number ENWF9202A1EF and ENWF9208A1EF comply with the standards according to the following LVD (2014/35/EU), EMC-D (2014/30/EU) together with RED (2014/53/EU) articles: 3.1a Safety/Health: EN 62368-1:2014 EN 62311:2008 3.1b EMC: EN 301 489-1 V2.1.1:2017-02 EN 301 489-17 V3.1.1:2017-02 3.2 Radio: EN 300 328 V2.1.1:2016-11 EN 301 893 V2.1.
PAN9026 Wi-Fi/Bluetooth Module 6 Regulatory and Certification Information Regulation (EU) 2017/1354 was adopted. This specifies how to present the information provided for in Article 10(10) of Directive 2014/53/EU.
PAN9026 Wi-Fi/Bluetooth Module 6 Regulatory and Certification Information 6.3.2 Equipment Classes The PAN9026 is a radio module classified as class-1 or class-2 radio equipment depending on the frequency band in which it can operate. This equipment class is passed on the end-product which integrates the module. Class 1 Class 1 radio equipment can be placed on the market and put into service without restrictions according to Article 1(3) of Commission Decision 2000/299/EC (Version 2018-01).
PAN9026 Wi-Fi/Bluetooth Module 6 Regulatory and Certification Information 6.4 Bluetooth Qualification The PAN9026 series modules are Bluetooth qualified as "Controller Subsystem". Following the qualified design ID’s listed for the module: Bluetooth Project Power Class Product Name BR/EDR LE Controller PAN9026 Class I 1 PAN9026 Class II 2 Model 1.
PAN9026 Wi-Fi/Bluetooth Module 7 Appendix 7 Appendix 7.1 Ordering Information Variants and Versions 22 Order Number Brand (Version) Description MOQ ENWF9201A1EF PAN9026 (US) Wi-Fi/Bluetooth radio module IEEE 802.11 a/b/g/n Bluetooth /LE 5.0 with a ceramic chip-antenna, US version23 1 000 ENWF9202A1EF PAN9026 (EU) Wi-Fi/Bluetooth radio module IEEE 802.11 a/b/g/n Bluetooth /LE 5.
PAN9026 Wi-Fi/Bluetooth Module 7 Appendix 7.2 7.2.1 Contact Details Contact Us Please contact your local Panasonic Sales office for details on additional product options and services: For Panasonic Sales assistance in the EU, visit https://eu.industrial.panasonic.com/about-us/contact-us Email: wireless@eu.panasonic.com For Panasonic Sales assistance in North America, visit the Panasonic Sales & Support Tool to find assistance near you at https://na.industrial.panasonic.